A couple of observations from a Construction Forensics Engineer. 1. You could have saved a little money by using joists that were 2' shorter. You do need not lap joists more that the height of the joists. 2. The standard box nails will eventually work their way back out of the floor. HD Galvanized or HD Galvanized ring shanks will hold better. 3. The reflective insulation is designed to keep heat out of a building and keep it cooler. Installing under the subfloor does not accomplish that goal of keeping heat in or out as you do not loose heat thru the floor anyway as heat rises. It would have been better to either glue or caulk the subfloor to the joists to prevent cold air from being sucked into the building. Same with the bottom plates on the exterior walls. Not sealing all penetrations thru the floor, walls, ceiling, electrical boxes and around windows and doors is were the greatest heat loss comes from. 4. Due to the lack of a foundation you should seriously consider getting the building anchored to the earth as the building can and will move. The main supports for the building need to be below the frost level (as required by code) as the continued freezing and thawing of the soils, the building will eventually sink into the ground little by little with each freeze cycle. Otherwise you are doing a great job and enjoy spending time with your Dad while you can.👍
3. You most certainly lose heat through the floor, even if not as much as through the roof or walls. But to add to your pointers on the product chosen here, there also won't be any reflectivity happening as the insulation is sandwiched under the sheets, making all the heat loss conductive.
It’s great! My shed has been completed and it turned out nice looking and sturdy and it is way better than the sheds that many of my neighbors had put up. Of course, I'm pleased with the outcome and this Ryan’s ua-cam.com/users/postUgkxGZedDTcDfgD7fG_uU4esfx_EgxzlY2_1 Plans was extremely useful to me as a guide.
Kyle, me and my son in law just built a garage and studio 8m x 6m and we built everything by hand. When I see builds like this I look and think yeah, we did it right. You can't believe how proud we are of our accomplishment.
I'm helping a young couple build something similar. They are willing to learn and had no idea what or how to use a chalk line. They have learned so much in the past 3 weeks. I'm having fun passing my knowledge on to them. When I met them their floor was 5 inches out of square and they had no idea how to fix it. I simply had them unbolt the rim joist from the pier block foundation and had the young man use my Thor hammer to whack one corner until it was square. I had them redrill and bolt it back down. They were so grateful that I've donated the last 3 weeks to their dream of not having a mortgage. I'm retired but still 57 years young and I'm really enjoying myself. Before you put the subfloor down you should have put osb underneath to keep out squirrels and other undesirable critters. Otherwise keep up the good work and keep making videos to inspire people to live with little or no mortgage.
My Grandfather built a house like this way back in the 60's. He lived there for 30+ years. Then sold it to move back into town. Taxes were less then $200. per year back then. Heated with wood. And didn't have full time electricity until 1974. Some winters the snow was so deep, the "Indians" from a near by reservation would come out on snow mobiles just to bring him supplies and make sure he was all right!! Fine people back then. God, how I wish I had a wilderness cottage like that to retire to!!!!!
@@satanslittlehelper9677 the second home underground should be 4 times bigger than the decoy home above ground . Stock it full of beer and whiskey and stay drunk underground until society and the earth revives it self and then emerge .
Only way my great grand fathers, grand father, father and I have known. Every nail has a story. The end product speaks for itself. As the grey beards always said, if it puts hair on your chest it is worth it.
1. THANK your DAD for us who watch. Thank him for his help - - AND for raising such a son. 2. COUNT the times you say - - in each video - - "and stuff like that" - - - think about it. 3. KEEP ON doing good things 4. and THANKS for letting us follow your progress - - - GOD bless your future
My Dad was an old school journeyman carpenter... I was never more proud of him than when he drove a 16 penny nail flat with one stroke (with a 16oz hammer) at the cub scout meeting.
Those old school carpenters were incredible. So good and efficient at their craft. It would be awesome going back in time and spending a day on a job site with a group of old school carpenters and just soak up all the information.
I’ve worked construction my entire life and I am always amazed by some of the older guys talking about how they did stuff before hammer drills and cordless power tools.
Kyle, here is a hint from an old carpenter. Put all the nail heads to the top of your hand. Then as you need the next nail you simply roll it into place between your thumb and index finger. Takes a little practice, but gets easier and faster. Good luck, build is looing good.
I am impressed and I do not impress easily. Dogs have done a great job of supervising and your dad is a gem - think about how long it would have taken without his help and oh yeah his great cooking. Wish I could have you come in and talk to my classes at the University about how to manage one's goals and life.
Another tip is, when framing the walls. When you put on the double top plate. Nail only over studs. That way when you drill for electrical or plumbing, or anything through the two top plates, you will not hit a nail and cause that drill to whip and hurt your wrists.
When I tried that I had a nearly 100% success rate of nailing into the nails in the studs and bending the 2nd top plate's nail. I said fuck that crazy shit and nailed near the studs, not directly on top, there just isn't enough room for 4 12d nails in 1 stud.
This makes me so thankful for my cordless tools. Has taken me couple years and i don't even want to think how much i've spent on them. But Milwaukee makes a DC charger and i can charge off my truck. now i want to add a couple of solar panels on my tool trailer to a battery inside that will charge them while parked. I have swung a hammer enough!
If it's installed properly. In this case, it wasn't. So doubt it does anything. With that said, and knowing what I know, I find it hard to believe that you are qualified to make a declaration about the product. Being shiny and reflecting light is completely pointless where there is no light. It will work as insulation, but no better than 6 mil plastic. As a matter of fact 6 mil plastic, installed correctly will offer far greater R value, 5 vs. 0, to this incorrectly installed Reflectix. Correctly installed Reflectix over floor joists offers an R value around 6. It can be double layered to go as high as 21, but I'm skeptical about that number. Traditional roll insulation is R-30. So tell me again, how it works better than I think.
@@ShikokuFoodForest I believe it has some value in direct sunlight, such as on a roof deck, where the issue is heat transfer through radiation. It doesn't do much to stop convection and conduction.
@@jshepard152exactly. This foil is a radiant barrier. It should be installed in attics and upper structure to reduce heat radiation from entering the building due to direct sunlight.
A friend of mine, myself and one other framed a 2000 sqft two story cape cod style house with nothing but hammers. I think our “tools” looked about like yours. We didn’t have electricity for the first floor so we cut everything with hand saws. (This was winter of 1992 south of you down by the cities) we finally found an old generator that we cobbled together so we could use skill saws for the second story and roof and sheathing. Your are right it’s not complicated just keep it straight.
That’s awesome! If you have time I like to watch Larry Haun. There are a few videos on UA-cam with him. He pounds nails faster than a nail gun and breaks down the building process really well. It’s just a lot of simple steps that make up a home.
Thank you very much to share. I'm from Brazil and recently I bought land to build my own cabin. I have been searching and watching many videos on UA-cam but your series is the best, my friend!
In the old days we took roofing tar (bull) covered the tops of the concrete pads then laid a piece of roofing felt on top,Then the nails we used we soaked in used motor oil for a day keeps them from rusting in a couple years,you can also paint all the joists with used oil stops rot and termites
Great start on the build! The size of your cabin 👍 very good size! You and your Dad working together will make memories forevermore👍 Dogs having a blast. Stay Safe! B Deacon Mb Canada
WOW You and your Dad did an awesome job. Love the dogs inspections. Bless your Dad for helping you out and having to sleep in his truck with out a matress even. That's a power Dad if you ask me.
I keep offering him the cabin on wheels but he said he’s either sleeping in the truck or the bath house haha. Once it stops getting below freezing at night we will all probably camp by the fire. The stars here are incredible.
Its really nice to see you and your father building together. Im learning from you two for when i start my cabin in a couple of weeks. There's something special about being the first person to live in a place, especially when you build it yourself.
The reason the floor system should be tied to the foundation is not just for frost heave. Depending on where you live, your structure can be subjected to high winds like a hurricane or tornado. Also, areas that are prone to earthquakes can wreak havoc on the structure.
If he was going to foundation tie, you would want a must more robust foundation. Which would cost a lot more. The odds of window blowing it off are stupid low.
I feel guilty laying here recovering from a new hip but sure enjoyed your informative video especially working with your father again what a treat I remember when I worked with my dad how much you can learn.Can't wait to see the rest I'll be watching be careful take care.
It's not everyday that a Son and his Dad get a Build A Log Cabin together. You both are doing a great job. Great memories that you both will have seeing it get completed together. I pray it all goes well. Love watching this.
I don't know who taught you how to build but They taught you well. I know your dad had a lot to do with it. Glad you are not cutting corners to save a few dollars here and there. Good job my friend!!!
I still would put a piece of flashing between the concrete blocks and the "green blocks". You can still do it 'after the fact' with a little jack. Your cabin will last 20 years longer !!
Yep, vinyl flashing. The salts in the treated wood will corrode flashing that is metal. Acts as a termite shield too. Ok...I will be quiet now. Nice cabin build. George.
You should have used a moisture barrier and treated wood on your concrete blocks. I would have split the plywood on the seams so you start with a half sheet on the second row but you getting it done. Good luck
The house project with your Oldman is an all around great project and so will the unforgettable good memories; enjoy your barbecues and coffee ☕ fellows
Lol I’m not the only one that uses the chainsaw to cut dimensional lumber. I find it more convenient that getting out the saw-saw and cords and blades. Probably a little less accurate but faster and easier and I keep my chains sharp. Love the video. Good work.
Kyle you and your Dad are doing a great job on the cabin. That is going to be one solid cabin. You're a lucky man to be young and being able to make your dreams come true. Hard work really does pay off. Keep up the good work buddy. Thanks for the video.
Coming along great, you and your Dad and Cierra have done an awesome job, I see your Dad is a south paw, like my Wife, The lefties always looking out for the Right! 😎😉👌👍
A level and square platform to build on is the key I can tell you know what your doing its refreshing to see a young man build his own way lost of respect to you for that all the best from alberta Canada 🇨🇦
You are a very capable instructor Kyle. I enjoy listening to you because you explains thoroughly and yet simply. Keep up the good work. I look forward to seeing your cabin build through to it's completion. You inspire me to build a cabin myself and with your instruction I will. Thank you.
I really do appreciate the descriptions and details in the video. It's great to look at time lapse projects and finished work, but for the aspiring builder, this is invaluable information.
cherish this journey with your dad I"m sure he is And thanks for such good explanations on everything. I think I'm learning something Thank you and good luck
I live in the East Kootenay of British Columbia. Our ground is similar to yours, I used the same building technique as you with pads and cinder blocks for my addition on my house. It is 10'*80'. I have had no problems with moisture or freezing affecting the structure.
It's looking good. When you have a good foundation level and square, it looks better and it makes it much easier to get everything else level and square and you continue to build.
I like the floating foundation. If a pier ever moves just throw a shingle under the beam to shim it. I’d mark known level measurements and check them every few years
The floating foundation is budget friendly and works quite well. I will definitely check it every year. More times than not when the ground thaws the cabin goes right back to the original spot. It doesn’t take much work or time to through a shim in like you said.
Hey Kyle, I have a suggestion, how about putting 6 mil plastic on the ground underneath as a moisture barrier. What's your dimensions on your cabin? Your doing a great job!
I love watching the build Kyle 😊. I'm always impressed 👌. I wish I learned these things 4 decades ago....your hard work shows in everything you build. Mom and Dad did right by you!! You're awesome 👌 👏 👍
I built a similar cabin about 20 years ago in Northern Ontario, and I found that the frost would heave and break the concrete slabs. I ended up replacing them with pressure treated 2x10 sandwiched in three layers 24 inches by 30 inches wide, using galvanized nails. I found that the wood is more forgiving and will not break like the concrete slabs (unless they have re-bar in them).
Thank you for the information. We will see how the concrete holds up. If I start having problems I will swap them out to wood pads like you described. In Alaska wood pads were the most common and I always wondered why but now I know. Thank you!
Great simple explanations of the process! Square and level. Basic tools. Everybody likes to over complicate the process and that can discourage others from even trying. Nice work Kyle! Looks great so far!
A couple of observations from a Construction Forensics Engineer.
1. You could have saved a little money by using joists that were 2' shorter. You do need not lap joists more that the height of the joists.
2. The standard box nails will eventually work their way back out of the floor. HD Galvanized or HD Galvanized ring shanks will hold better.
3. The reflective insulation is designed to keep heat out of a building and keep it cooler. Installing under the subfloor does not accomplish that goal of keeping heat in or out as you do not loose heat thru the floor anyway as heat rises. It would have been better to either glue or caulk the subfloor to the joists to prevent cold air from being sucked into the building. Same with the bottom plates on the exterior walls. Not sealing all penetrations thru the floor, walls, ceiling, electrical boxes and around windows and doors is were the greatest heat loss comes from.
4. Due to the lack of a foundation you should seriously consider getting the building anchored to the earth as the building can and will move. The main supports for the building need to be below the frost level (as required by code) as the continued freezing and thawing of the soils, the building will eventually sink into the ground little by little with each freeze cycle.
Otherwise you are doing a great job and enjoy spending time with your Dad while you can.👍
Good observation. Also with that insulation between the joist and plywood, wouldn't that make the floor wobbly and not as solid?
3. You most certainly lose heat through the floor, even if not as much as through the roof or walls. But to add to your pointers on the product chosen here, there also won't be any reflectivity happening as the insulation is sandwiched under the sheets, making all the heat loss conductive.
I read the comments for advice like this. Thanks.
Love seeing constructive comments like these on the top, rather than only the high-fiving.
Will the joists begin rotting overtime since they are exposed?
It’s great! My shed has been completed and it turned out nice looking and sturdy and it is way better than the sheds that many of my neighbors had put up. Of course, I'm pleased with the outcome and this Ryan’s ua-cam.com/users/postUgkxGZedDTcDfgD7fG_uU4esfx_EgxzlY2_1 Plans was extremely useful to me as a guide.
Kyle, me and my son in law just built a garage and studio 8m x 6m and we built everything by hand. When I see builds like this I look and think yeah, we did it right. You can't believe how proud we are of our accomplishment.
I'm helping a young couple build something similar. They are willing to learn and had no idea what or how to use a chalk line. They have learned so much in the past 3 weeks. I'm having fun passing my knowledge on to them. When I met them their floor was 5 inches out of square and they had no idea how to fix it. I simply had them unbolt the rim joist from the pier block foundation and had the young man use my Thor hammer to whack one corner until it was square. I had them redrill and bolt it back down. They were so grateful that I've donated the last 3 weeks to their dream of not having a mortgage. I'm retired but still 57 years young and I'm really enjoying myself. Before you put the subfloor down you should have put osb underneath to keep out squirrels and other undesirable critters. Otherwise keep up the good work and keep making videos to inspire people to live with little or no mortgage.
Bless you for sharing your knowledge.
I could really use these skills.
You’re a good man
Cherish every single moment spent building memories with your Dad.
I would give "anything" to have mine back.. Great job on your cabin.
same here.
I’ll second that!
Same dude. Him and I built out a van together and it was one of the most memorable times of my life.
Above ⬆️ the concrete does not move like the rest of the wood -
Same here as well.
My Grandfather built a house like this way back in the 60's. He lived there for 30+ years. Then sold it to move back into town.
Taxes were less then $200. per year back then. Heated with wood. And didn't have full time electricity until 1974.
Some winters the snow was so deep, the "Indians" from a near by reservation would come out on snow mobiles just to bring him supplies and make sure he was all right!!
Fine people back then.
God, how I wish I had a wilderness cottage like that to retire to!!!!!
I think I am mostly jealous that you get to work on a project with your Dad.
Cut a access hole in the floor under the bedroom for a escape hatch into a root cellar/ storm shelter n build a secret shelter in the ground
Have the real home be completely underground and this cabin be a front for a full meth lab under its floors !
@@satanslittlehelper9677
Okay okay, so a part 2 then??
@@satanslittlehelper9677 I second the meth lab, why just have it be mortgage free when you could be generating income
😂
@@satanslittlehelper9677 the second home underground should be 4 times bigger than the decoy home above ground . Stock it full of beer and whiskey and stay drunk underground until society and the earth revives it self and then emerge .
Outstanding, I was a carpenter in the 70’s and did everything by hand. No power nailing, all by muscle and hands. Great job
Damn right lyle
Only way my great grand fathers, grand father, father and I have known. Every nail has a story. The end product speaks for itself. As the grey beards always said, if it puts hair on your chest it is worth it.
No tools for us , makes us stronger and appreciative
1. THANK your DAD for us who watch. Thank him for his help - - AND for raising such a son.
2. COUNT the times you say - - in each video - - "and stuff like that" - - - think about it.
3. KEEP ON doing good things
4. and THANKS for letting us follow your progress - - - GOD bless your future
Eye protection...especially whilst nailing...my father took a slither in his eye in 50s.
Swansea, UK.
My Dad was an old school journeyman carpenter... I was never more proud of him than when he drove a 16 penny nail flat with one stroke (with a 16oz hammer)
at the cub scout meeting.
uh - - tell us - - WHICH Cub Scout needed TACKING TO THE WALL?
Those old school carpenters were incredible. So good and efficient at their craft. It would be awesome going back in time and spending a day on a job site with a group of old school carpenters and just soak up all the information.
I’ve worked construction my entire life and I am always amazed by some of the older guys talking about how they did stuff before hammer drills and cordless power tools.
@@KYLESCABIN Every young person should have the opportunity to do just that. So much of the old ways are dying out. Sad.
@@KYLESCABIN what size cabin?
Kyle, here is a hint from an old carpenter. Put all the nail heads to the top of your hand. Then as you need the next nail you simply roll it into place between your thumb and index finger. Takes a little practice, but gets easier and faster. Good luck, build is looing good.
Thank you for that I will give it a try!
I am impressed and I do not impress easily. Dogs have done a great job of supervising and your dad is a gem - think about how long it would have taken without his help and oh yeah his great cooking.
Wish I could have you come in and talk to my classes at the University about how to manage one's goals and life.
Get your class to watch, then quiz them after watching, to see whether they have learned anything.
@@patriciabarnes7034 retired now
It's nice to see someone who knows how to drive a nail.
Another tip is, when framing the walls. When you put on the double top plate. Nail only over studs. That way when you drill for electrical or plumbing, or anything through the two top plates, you will not hit a nail and cause that drill to whip and hurt your wrists.
When I tried that I had a nearly 100% success rate of nailing into the nails in the studs and bending the 2nd top plate's nail. I said fuck that crazy shit and nailed near the studs, not directly on top, there just isn't enough room for 4 12d nails in 1 stud.
This makes me so thankful for my cordless tools. Has taken me couple years and i don't even want to think how much i've spent on them. But Milwaukee makes a DC charger and i can charge off my truck. now i want to add a couple of solar panels on my tool trailer to a battery inside that will charge them while parked. I have swung a hammer enough!
I normally don't find a lot of use for Jackery Battery Packs, or similar, but that might be useful to you.
Great job hammering. I probably would have bent 40% of the nails. 😂 Thanks for all the detailed explanations, it’s very helpful for me.
i wouldve bought a generator and air nailer, probly want the genset for a cabin anyways
He nailed it! Sorry... Has to be said
Looking good.It was nice to watch a man with a hammer and not a nail gun.
This is. Nice size cabin I love being able to watch from the beginning ♥️
You're reflective insulation works way better than people think. Great job.
I was wondering about that.
If it's installed properly. In this case, it wasn't. So doubt it does anything. With that said, and knowing what I know, I find it hard to believe that you are qualified to make a declaration about the product. Being shiny and reflecting light is completely pointless where there is no light. It will work as insulation, but no better than 6 mil plastic. As a matter of fact 6 mil plastic, installed correctly will offer far greater R value, 5 vs. 0, to this incorrectly installed Reflectix. Correctly installed Reflectix over floor joists offers an R value around 6. It can be double layered to go as high as 21, but I'm skeptical about that number. Traditional roll insulation is R-30. So tell me again, how it works better than I think.
@@keith_dixon What is the correct method to install reflectix?
@@ShikokuFoodForest I believe it has some value in direct sunlight, such as on a roof deck, where the issue is heat transfer through radiation. It doesn't do much to stop convection and conduction.
@@jshepard152exactly. This foil is a radiant barrier. It should be installed in attics and upper structure to reduce heat radiation from entering the building due to direct sunlight.
A friend of mine, myself and one other framed a 2000 sqft two story cape cod style house with nothing but hammers. I think our “tools” looked about like yours. We didn’t have electricity for the first floor so we cut everything with hand saws. (This was winter of 1992 south of you down by the cities) we finally found an old generator that we cobbled together so we could use skill saws for the second story and roof and sheathing. Your are right it’s not complicated just keep it straight.
That’s awesome! If you have time I like to watch Larry Haun. There are a few videos on UA-cam with him. He pounds nails faster than a nail gun and breaks down the building process really well. It’s just a lot of simple steps that make up a home.
Thank you very much to share. I'm from Brazil and recently I bought land to build my own cabin. I have been searching and watching many videos on UA-cam but your series is the best, my friend!
No screws or framing hardware was harmed in the making of this video. Great work.
In the old days we took roofing tar (bull) covered the tops of the concrete pads then laid a piece of roofing felt on top,Then the nails we used we soaked in used motor oil for a day keeps them from rusting in a couple years,you can also paint all the joists with used oil stops rot and termites
That’s a very nice size cabin size. A lot bigger than I thought . Thanks dad, for helping. 👍👍
Excellent job guys!! Coming along nicely folks. Stay safe my friend's.🤓👍🤓👍 Randy.
Great start on the build! The size of your cabin 👍 very good size! You and your Dad working together will make memories forevermore👍 Dogs having a blast. Stay Safe! B Deacon Mb Canada
WOW You and your Dad did an awesome job. Love the dogs inspections. Bless your Dad for helping you out and having to sleep in his truck with out a matress even. That's a power Dad if you ask me.
I keep offering him the cabin on wheels but he said he’s either sleeping in the truck or the bath house haha. Once it stops getting below freezing at night we will all probably camp by the fire. The stars here are incredible.
@@KYLESCABINYour Dad sounds like a fun guy. I bet the stars are incredible.
Its really nice to see you and your father building together. Im learning from you two for when i start my cabin in a couple of weeks. There's something special about being the first person to live in a place, especially when you build it yourself.
So 6 months later with winter coming.... How's your cabin build going?
I wish my father was this cool, knowing how to build a house and all. But I'm 31 year old woman and I'm just gonna have to teach myself.
You have one hell of a nice hammer swing Kyle! Looks great!
The reason the floor system should be tied to the foundation is not just for frost heave. Depending on where you live, your structure can be subjected to high winds like a hurricane or tornado. Also, areas that are prone to earthquakes can wreak havoc on the structure.
By not tying it you can make adjustments with shims if it heaves I set posts 6' deep in concrete and it still heaved (in the north)
@@deanyanko3326 Maybe but at least it won't blow away.
If he was going to foundation tie, you would want a must more robust foundation. Which would cost a lot more. The odds of window blowing it off are stupid low.
@@mrgoats who evens knows if they can get a ready mix truck up wherever they’re at.
They don't get Hurricanes, Tornados or Earthquakes in Canada, Nate. Lol.
So sweet,you get to do it with your dad.i miss my dad.
Great video - Love your Springers !!
I am utterly impressed with you and your skills! Simple tools and look what you’ve done! I eagerly awaiting all your videos for sure!
I feel guilty laying here recovering from a new hip but sure enjoyed your informative video especially working with your father again what a treat I remember when I worked with my dad how much you can learn.Can't wait to see the rest I'll be watching be careful take care.
Thanks Matt!
It's not everyday that a Son and his Dad get a Build A Log Cabin together. You both are doing a great job. Great memories that you both will have seeing it get completed together. I pray it all goes well. Love watching this.
Working with your dad and fire cooking , that’s the good life
I don't know who taught you how to build but They taught you well. I know your dad had a lot to do with it. Glad you are not cutting corners to save a few dollars here and there. Good job my friend!!!
CONGRATULATIONS ON BUILDING YOUR NEW HOME CAN'T WAIT UNTIL YOU FINISH IT
I still would put a piece of flashing between the concrete blocks and the "green blocks". You can still do it 'after the fact' with a little jack. Your cabin will last 20 years longer !!
@Wilbur Gold , I agree ☝️
Yep, vinyl flashing. The salts in the treated wood will corrode flashing that is metal. Acts as a termite shield too. Ok...I will be quiet now. Nice cabin build. George.
I've seen people use shingles for this purpose. Are you worries the floor will squeak with nailed subfloor?
@@cvzphotography I'd want my cabin floor to be a little squeaky
I'd use pieces of cap sheet to protect the wood or cheaper dpc. I have plenty of cap sheet off cuts.
Paslode. All day, every day. Beams like that take miniutes. But I also get the value of swinging a hammer all day with your Dad too. Well done.
Very nice, i’ve always liked the framing hatchet when I was building houses. Thanks brings back memories
Well done 👍 good to see the cabin coming along at a good pace .
You should have used a moisture barrier and treated wood on your concrete blocks. I would have split the plywood on the seams so you start with a half sheet on the second row but you getting it done. Good luck
The house project with your Oldman is an all around great project and so will the unforgettable good memories; enjoy your barbecues and coffee ☕ fellows
Lol I’m not the only one that uses the chainsaw to cut dimensional lumber. I find it more convenient that getting out the saw-saw and cords and blades. Probably a little less accurate but faster and easier and I keep my chains sharp. Love the video. Good work.
Hey Mr. Kyle this video is inspiring and I am glad you had so much to share. You are one heck of a young man, very proud of you!
This is excellent. Probably one of the best, simple, builds.
Man ! I been looken for a video series like this for YEARS !!! Good Job man ....... please include the costs as you go if you could !!
Kyle you and your Dad are doing a great job on the cabin. That is going to be one solid cabin. You're a lucky man to be young and being able to make your dreams come true. Hard work really does pay off. Keep up the good work buddy. Thanks for the video.
Where are they located. I am from Rutland ma wish they are here.
You and the team are doing a great job, well done :-)
Great work. Seems a lot simpler than others I've watched.
GOOD OLD DAD, GOD BLESS HIM, FROM UK
Old school construction, love it.
I have that Stiletto hammer, good for raw framing. Still went back to my 20 oz fiberglass handle Plumb My go too for 45 yrs.
Sell the plumb hammers here 🇦🇺 as well, always was my favourite too
Fantastic job man! Thank you for sharing and good luck! Will attempt to make my own with your instructions.
Such a great start, so excited for you guys.
Coming along great, you and your Dad and Cierra have done an awesome job, I see your Dad is a south paw, like my Wife, The lefties always looking out for the Right! 😎😉👌👍
Well done! Keep up the great work and keep the videos coming.
Always good to watch a build from the ground up . Thanks for sharing , It will be a great home ///
Happy for you guys and your level floor! It is a good felling when things turn out right!
Kyle, congratulations! It is wonderful to see your dreams taking shape!
A level and square platform to build on is the key I can tell you know what your doing its refreshing to see a young man build his own way lost of respect to you for that all the best from alberta Canada 🇨🇦
Lots of respect dang auto correct
You are a very capable instructor Kyle. I enjoy listening to you because you explains thoroughly and yet simply. Keep up the good work. I look forward to seeing your cabin build through to it's completion. You inspire me to build a cabin myself and with your instruction I will. Thank you.
I really do appreciate the descriptions and details in the video. It's great to look at time lapse projects and finished work, but for the aspiring builder, this is invaluable information.
great job. I lived in NW Minnesota for 43 years . Looking forward to the next video .
great job! you and your pops are badasses! cant
wait for more!
work! work!and more work! looks damn good! solid! luv those dogs!
This is awesome making memories with your Dad! fantastic job. I lost my Dad 27 yrs ago.
Great progress! I love seeing the young pine growing in all around the cabin. They will make a nice needle bed someday.
The cabin is going to be HUGE. Nice job!
Skeeter all are getting a beautiful new home.we are on a Journey💕🐾💕🐾
Great vid, and great work Kyle. Lookin awesome, and can't wait for the next step 😎👍🏻
cherish this journey with your dad I"m sure he is And thanks for such good explanations on everything. I think I'm learning something Thank you and good luck
So inspiring Bro!! Thank you for giving us trade challenged the confidence to do things on our own instead of always paying
I live in the East Kootenay of British Columbia. Our ground is similar to yours, I used the same building technique as you with pads and cinder blocks for my addition on my house. It is 10'*80'. I have had no problems with moisture or freezing affecting the structure.
How is the foundation holding up? I am about to build the same and was worried about movement
I had to look back and find this video, I'm very inspired and starting to build my own camp. Thanks so much!
Exactly what I was looking for. Thank you so much, and good job.
this is nice fully supporting y’all !!!
It's looking good. When you have a good foundation level and square, it looks better and it makes it much easier to get everything else level and square and you continue to build.
Al Bundy, how’s Peggy doing?
@@alanj7306 oh it's terrible.... she's healthy as a horse lol
Great that your dad is helping you build your future home!
Lots of progress and looking great!!
Going to be such a cool series to look back on!
my father-inlaw has a passload .... highly recommend!!! such a time saver when making beams - GREAT WORK GUYS!
Thank you for showing how to build a cabin . I will look forward for you next video.thank again 😊
You guys working together is just beautiful. I just really like you guys.
Thanks for posting this video series!
I like the floating foundation. If a pier ever moves just throw a shingle under the beam to shim it. I’d mark known level measurements and check them every few years
The floating foundation is budget friendly and works quite well. I will definitely check it every year. More times than not when the ground thaws the cabin goes right back to the original spot. It doesn’t take much work or time to through a shim in like you said.
It also lowers your property taxes in many places.
Looks good....Lots of money for that lumber....Crazy how much lumber increased....Awesome that Dads helping you ....Pups we’re having a blast...😎
Wow. Well done. Thanks for sharing 👏👏👏
Really nice job man cant wait to see the walls next thanks
Hey Kyle, I have a suggestion, how about putting 6 mil plastic on the ground underneath as a moisture barrier. What's your dimensions on your cabin? Your doing a great job!
Also cover plastic with crushed stone , nothing will grow underneath
A job well done. Looks great!!
I love watching the build Kyle 😊. I'm always impressed 👌. I wish I learned these things 4 decades ago....your hard work shows in everything you build. Mom and Dad did right by you!! You're awesome 👌 👏 👍
I built a similar cabin about 20 years ago in Northern Ontario, and I found that the frost would heave and break the concrete slabs. I ended up replacing them with pressure treated 2x10 sandwiched in three layers 24 inches by 30 inches wide, using galvanized nails. I found that the wood is more forgiving and will not break like the concrete slabs (unless they have re-bar in them).
Thank you for the information. We will see how the concrete holds up. If I start having problems I will swap them out to wood pads like you described. In Alaska wood pads were the most common and I always wondered why but now I know. Thank you!
Great simple explanations of the process! Square and level. Basic tools. Everybody likes to over complicate the process and that can discourage others from even trying. Nice work Kyle! Looks great so far!
Great job! Enjoying your videos.
its a fantastic job with minimum tools. Awesome job Buddy. This shows your workmanship. Respect to you