How I Fit Fat A$$ wheels On a Foxbody NO CUTTING! 10.5" & 315's
Вставка
- Опубліковано 7 лип 2024
- #stance #widetire #315s #10.5"
You KNOW you like a fat a$$ foxbody stance! Everyone does! Big 10.5" wheels on back with 315 tires on this foxbody. How i stuck the largest tire you can think of under my mustang!
SMASH LIKE, SUBSCRIBE AND BELL FOR NOTIFICATIONS OF NEW VIDEOS!
SUPPORT THE CHANNEL! teespring.com/stores/neomustangs
JOIN NEOMUSTANGS MEMBERSHIP CLUB!
/ @neomustangs
INSTAGRAM: neomustangs
TWITTER: / neomustangs
FACEBOOK PAGE: / neomustangs.restoration
EMAIL: MYBUSINESS01@HOTMAIL.COM.
#neomustangs #foxbody #315-35-17 #mustang #ford #87-93Mustang #wheels #tires
PLAYLISTS:
TECH CORNER PLAYLIST: ua-cam.com/users/playlist?list...
PROJECT HOTWHEELS: ua-cam.com/users/playlist?list...
BLACK CAR: ua-cam.com/users/playlist?list...
GRUDGE NIGHT RACING: ua-cam.com/users/playlist?list...
DADS CAR: ua-cam.com/users/playlist?list...
Fat A$$ wheels On a Foxbody NO CUTTING! - Авто та транспорт
Dude hands down you have the best foxbody channel on the internet, and.... not only do u help guys like me get threw the foxbody struggle but u also sell on ebay hard to find pieces that lmr doesn't offer for the fox, dude thank u seriously
Thanks man !
Great video! I was in your lifestream a few months back and asked about those. And at the end of the stream you explained it to me then and I really appreciated it. Glad to see a more detailed video with the wheel off and everything. I wanted to order a set, but still out of stock in chrome the last time I checked. They look awesome D.A. !
Cool man !
Been playing with Foxes forever it seems and yet there’s always still something cool and useful to learn. Thanks for sharing with everyone !
Ye said !
Love the deep dish look… great info
Thx 🙏
love the deep dish look. In the spring I plan on doing something similar!!
You should!
Thanks for sharing your knowledge.
Yes sir !
Love the video thanks for the info 👊🏻
Yw
Thinking about going with black wheels sometime on my red GT. So good info. I also like those exact same wheels.
Love that stance
Ty
Thanks for the info.. love your channel
Ty !
Great information, bro. I know how to do it now.
Love this look on your car 🔥🔥🔥🔥🔥🔥
Ty !
Being my fox is also black.. I had the silver 17 cobra r wheels for 20 years and wanted a change and didn’t want new wheels so i had them blasted And powder coated smoked charcoal and changed the whole look of it and I love it. Wheels make our break a car
I agree!
Deep dish looks so good and the rubber marks the 315 leaves on the black top.
Yes!
Love the staggered hot rod look. Going with different wheels on my some day. 88 coupe.
Ty!
Thanks for sharing your secrets on what works D👍
I must of done something wrong when I dabbled with Spacers. My car "swayed" like a dam boat driving down the road, some scary sh!t
Appreciate it !
Subbed... Love Your energy...
Ty !
Thanks for the shout out. I look as fat as those wheels and tires! 😁
Nah man was a great pic
Great demonstration and explanation. Love how it looks. Unfortunately mine has cobra saw blades and I don’t want to buy more rims but I’m not into the saw blades anymore
Ty !
Intro was on point
Ty
Nice!
It looks good.
Ty
Great vid! I was wondering if spacers were used. It does look like a beast with those wheels and tires.
Ty
Nice video!! I have the same size tire and rim on my orange car! 3" exhaust. No spacers. Had to message the inner tub to make it work. rolled fenders and no one can ride in the back set!! ;-)
Nice !
What spring rate would be good to stiffen up the suspension so the cars quarter panels wont dip into the tire?? I’m having issues with this
@@Neomustangs hey would you happen to know what size wheel stud & spacers I would need? I’m running 17” Pony Wheels with 305 rubber. Backspacing is 6.29” My issue is what would fit inside the stock pony center caps??
What size do you have on the front? More info on the weight jackers also please sir!! Looks amazing!!!
Danny boy. Great work I bought a 18 inch Saleen 265 35z 95w and I'm wondering what problems I'll have in the front on my 90GT. AND do I still need rear spacers. Thks
Awesome video bro. I have some 17" x10 pony r wheels with 315-35-17 I would love put a 305-45-17 under my coupe
Hmm those would look sick
I have 315/35ZR17 Nitto NT05R on my 93 Cobra. 👍
Nice vids. Can you recommend part number for the ARP 3” studs. Thanks.
You have to remove the quad shocks to achieve this right?
I love how you laugh at your brake set-up after saying you went 9's on a front stock brakes..🤯 Being on the edge of death was always a fun feature of driving a foxbody back in the day.
I've been pissed I couldn't find the join button. I mostly watch you on my phone. I was eating lunch and watching on my laptop and there it is right beside the subscribe button. Stupid phones. Haha
It’s good on laptop and pc.
Love the set up brother! forgive me for asking but what are quad plates?? LOL!!
Thx man !
Nicely done. How do you feel about the sn95 5.0s? I see em all the time fairly cheap been thinking of getting one
Ya not a bad investment
I want you to put my On3 turbokit on
Whats up brotha you killing it!.
BTW what size rear tire did you use on "Project Hot wheels"
I have the same set up with 275's
Yes 275
What brand are your weight jackers? How much do they improve your grip over stock arms? How much adjustment in ride height do they deliver? Thanks neomustang
Not sure i think granatelli's?
I have fox length axles. Basically my rear set up is stock. I fear rolling my fenders, it has original paint. Can I run a 275 or 285 30 r18 with a 10.5 width wheel and not roll the fender????
Nah always wanna roll fenders period. They are so out of place. Just the rears
What's up man .love your video I was hoping u could help me out. I just bought some custom wheels for my foxbody. The centerbore on the front wheel are 63.4 and I can't get the to go on the hub any advice? Do ou kno if that's the correct hub size on the front it's a 1989 mustang gt 4 lug stock break system. Thank in advance
Do you have a video that goes over your exhaust setup?
I will do that for sure
I need help badly, how can I get a hub centric spacer for my race star wheels?
Ahhh yes ....fender rolling , so nervous to do that with stock paint
Ya it’s not easy to not chip. Heating paint up does help
Awesome info. Where’d you get your spacers from?
Summit racinf
So do you need better control arms to compensate for the missing quads with stock power or can I remove them and not worry about it. I flipped my quads awhile ago to fit my 10' wheels on but now that I lowered it the shocks bump against the quads a little
Nah you can do this pretty much with stock stuff. But with a larger tire comes sacrificing of the quad shocks
I know this is an old video, but wondering if it would be possible to also run these 10.5 inch wheels up front if swapped to sn95 from control arms + 5 lug spindles...would like to run 315s all the way around, this is for a track car so not afraid to cut/flair fenders.
I would not recommend
Does the car handle or feel any different without the quad shock not being back there? I was told back in the day it did help having those goofy shocks back there.
No
any advice for a 66 mustang to get the same look on my car, it is complete stock but I want that look that your car has
8.8 axle. 3” studs. Spacers
I have a 90 coupe can this set up e done with 18x10.5 & 18x8.5 up frony i have the pbr 5lug brake setup
how wide can I go with sn95 axles and cobra disc brakes? I have 10 inch wide Saleen reps with 275/35/18 on rear
You can do 10.5” probably wouldn’t need any spacers to make up for the 3/4” wider
I’m doing a sn95 rear end swap on my fox. I’m looking for 18x10 wheels (SVE series 1) in the rear. Will they fit?
What size rims are those
What brand tires are these. I know some run wider than others. Looking at nitto nt555 g2.
G2s
A fat bottom tire on a Foxbody is definitely the way to go 10.5 rear here
yes sir!
Thanks for the video! I have 03 Cobra replicas as well, 10.5 for the rear, but I have 275/40s I was planning to run. Do you think the 10.5" wheel is too wide for a 275?
It wont look right thats for sure. it'll fit snug tho
@@Neomustangs hmm.. ok. The listing for the tires said they can be used on rims up to 11", so I thought this would be an ok setup.
Maybe I'll need to sell the 275s and go with something wider...
I have 86 foxbody I’m putting a new edge rear end in it I have some 17x11.5 fr500 with 315/35/17 tires on it you think they’ll fit
I dont really know cant answer that.
Dude i want the exact same set up on my 93. What it set you back on everything if you dont mind
Just spacers and the 3” studs for axles.
Great video bro. My question is, do you plan on doing a disc brake set up with the c-clip eliminators, if so cause i need to do mines.My setup is like yours except i have 4lugs 5/8 studs.
No. Caddy brakes in front. Stock in back.
@@Neomustangs I was wondering if the Caddy Brembo brakes would work with these wheels. Have you verified fitment yet?
I love the way these wheels look.
17” and above yes
What size tires in the front?
Hey Bro!! Your channel is one of the best. You Always have kickass opinions on everything. So I greatly appreciate you.
So I need your opinion lol. I’m seriously looking at a wheel for my 91 notch that’s 5 lug 18x11 + 8mm
For the rear and could go either 18x9 +30mm or... 18x9.5 +10mm on the front
Which way would go for the fronts and for tires? I’m thinking this would be totally doable with the set up you showed in this video... thx in advance
If I could get it I would do a 9 inch in the front
@@Neomustangs thanks for the quick reply. 🤙🏻
I have the anniversary wheels 17x10 my back spacing is a little less than yours , they are lmr, can I still run 35/315 with the 1/2” and 1/4” spacers as you did? Of coarse 3” studs, what spacers u recommend?
I’m not 100% sure you can use spacers to figure all that out tbh
@@Neomustangs I’ll get the spacers and give it a shot, thanks
I've been running a 17x10.5 wheel with 315s on my 93 coupe for years now.
Is the space a personal preference? I did need spacers with either drums or the Cobra disc conversion.
Yes. If you wanna move the tire away form 3” tails it is.
Any pictures ?
Is this something you can do a convertible as well? And can you send a link if you have it handle for the 3" studs and the spacers!
Yes. You need to know what knurl your axles take before ordering 3” studs.
@@Neomustangs whatever stock is I also did quad shock delete if that matters or help
I wonder what your running in the front
255/40/17. 17x9
What's your feelings on 15 inch wheel combos? Say a 295/50-15
It’s just not my thing anymore. I use 15 for slicks only
I guess it all depends on your definition of the word fit. Sooner or later it's going to end up being mini tubs or flares.
Nah no tubs. Flares are an idea i have been thinking about for a long time.
What’s the point of rolling the fenders, when the tire sticks out anyway?
Who cares. I like it
Never mind
Dude i thought something was wrong with my rear because one side sticks out further than the other
Good video as usual. I just swapped to a 355 gear in my car and now I’ve got a vibration from about 60+.. is this something that is common or have you heard of it happening??
Check driveshaft bolts.
They are tight. Could the driveshaft be clocked wrong? Like not put back in the exact same spot that it was.. would that make a difference? From 0-50 there is no vibration at all. It’s just speed oriented At 60 and above..
@@landan_melton possible, check balanci g on all wheels...had same issue at same mph....And corrected after of set wheel balance.
Hey Ya Never know and it's a cheap correction.
What did you do in the front?
3” studs and spacers.
I have the same rear wheels on my coupe with no spacers, and I run a 305/45/17 MT et street ss. My car sits a little lower but looks right, Fox chamber did a video on it….video #25
Cool
I think it’s cool how well you know these cars and how quickly you always respond to questions or comments. #Keepthefoxbodyalive
Dk what did you have to do to get those 305-45-17 to fit under your coupe.Thank...Elton
@@ezebattle lots of hammer time and rolling the fenders
It’s important imo
I got same rims w sn95 differential on my fox and my shit be rubbing ☹️
Damn
I'm running 18x10 rear with a nitto 555 285/40, I hope they don't rub 😣🤦♂️
Let’s hope not!
Please use hub centric wheel spacer, not worth the risk
Same wheels and tires
How much that this setup cost ?
Is there a slight bulge putting a 315 on a 10.5? How’s the handling?
I only spaced it out for the 3" tails however doesnt bulget out at all imo.
Might be a dumb question but this would work with disc brakes also?
On rear ?
@@Neomustangs yeah
Great stuff.. whats ur thoughts on 50tussin his cars are fast with no poweradders. All the fox channels like brew2l yours and other should get together with him that be cool all help each other grow
Rod is definitely fun to watch. He proves that light is might! When racing. It’s great to watch. I enjoy my cars a little different than most
@@Neomustangs your stuff is great to you helped me with a supercharged build that iam dojng for my buddys 89 gt keep up the great content all the best to you.
And u eliminated quad shock I see I have the kr500 offset 25 no spacer 285 40 18s 10.5 with quad shock reversed
I have eliminated quads on all my mustangs. They dont serve a purpose with my equipment
@@Neomustangs Kool
What tire size goes on a 11.5 inch wide wheel
That’s a 10.5” wheel
@@Neomustangs lol ik but i got 11.5 and ive bought tires twice before that didn't fit and i thought 305s would fit and were to small
Can I put this tire in a 17x10” instead of 17x10.5. ?
No
@@Neomustangs dude it’s only 1/4 less per side.
@@wayne888peter the 315s will stick out pretty good on a 10”. It’s all good. Try it out. I’m just telling you what i think.
My son told me that he never seen a convertible foxbody with a 315 on it he said it want work! How can I prove him wrong!
Follow the instructions in the video it’s pretty clear.
What's your tire setup upfront?
17x9 255/45/17
I'm attempting to go 275 up front on the same wheel setup!
Boss why 1/2 and 1/4” spacers.
Cause the fox axle is offset. Lol. Never sits right
I’m running a 285/40 on 10” pony wheels. I wanna the 315’s on them. They are not deep dish
It won’t look right imo. But you can tey
Your Mustang is sexy as hellion
Music waaay to loud
Hey Neo . Any rubbing issues?
Not really
If it does.. what part of inner should I expect? Probably hard to describe🤷🏻
Or just use a Sn95 rear end
No
@@Neomustangs yep. It'll work. Won't need space since it's already wider.
@@samuelmariscal4556 pretty sure sn is 3/4” wider each side. Due to ring. I’m running 1/4” spacers on one side. 1/2” on other. So that would actually move my wheel out further than it already is no spacers on sn95 axle ……
You're absolutely right😅. My bad. Keep up the great work!!!!
Wasn’t trying to outwit you for sure. Just thought about that when I got the wheels
Or, you could do less backspacing and not run a spacer….
Wanted specific wheels. They only have so much backspacing and I have 3” tails lol……
@@Neomustangs I get it. Just saying that you could maybe find another wheel with an even deeper lip!
Looks fucking awful. Sticking out, looks like 🗑
No it don’t.