Roof Rack Install and Repaint the XJ Roof

Поділитися
Вставка
  • Опубліковано 14 січ 2022
  • The roof was in need of serious repainting. This video covers the steps I took to remove the roof rack rails and how I repainted the roof surface.
    Now that the roof has been painted, I plan to get a roof cargo basket to top off the jeep for some great overlanding fun!
    Here is a link to my Amazon store that has all the items I used in the process.
    Paint and primer:
    www.automotivetouchup.com
    Link to my Amazon Store:
    www.amazon.com/shop/justjeepi...
    #trending
    #jeep
    #diy
    #xjcherokee
    #xjlove
  • Авто та транспорт

КОМЕНТАРІ • 23

  • @danhambrick6331
    @danhambrick6331 2 роки тому +2

    Nice job Joe.👍👍

    • @JustJeep_It
      @JustJeep_It  2 роки тому

      Thank you!!!! Been a while since I published a video. Good fun.

  • @buildingusa9604
    @buildingusa9604 2 роки тому +2

    Nice 👍 awesome job

    • @JustJeep_It
      @JustJeep_It  2 роки тому

      Thank you!!!! Much appreciated!!!!!

  • @lisavalaitis8266
    @lisavalaitis8266 2 роки тому +1

    Love the intro!!!!

  • @projectbumblejeep4190
    @projectbumblejeep4190 2 роки тому +3

    Wasn't expecting a rattle can paint job. Started out with rattle cans on the Bumble Jeep (Rustoleum) and decided to switch before I finished (still not finished) to a 15$ Harbor Freight HVLP gun and quart cans of Rustoleum. Much better results. Still not sure if I will clear coat the Bumble Jeep. The Rustoleum buffs up pretty nice after is sits for a while. Your Project is shaping up nicely. Looking forward to more. God bless and stay well. BTW, what part of PA? I'm in the Hamburg area. A couple of the other Jeep (XJ) channels I follow are here in PA.

    • @JustJeep_It
      @JustJeep_It  2 роки тому

      Yeah. It worked better than I imagined. I would love a real deal paint booth and a spray gun. Maybe for my next jeep :-).
      I’m out in Chester County PA

  • @MajorWeakness
    @MajorWeakness 2 роки тому +1

    Came out great!

    • @JustJeep_It
      @JustJeep_It  2 роки тому +1

      Thank you. Not bad for a rattle can job. Way better than what it looked like

  • @MrJTime
    @MrJTime 2 роки тому +1

    Looks great!!

  • @spanishrose8398
    @spanishrose8398 Рік тому

    Wondering if you have any advice on a Jeep roof that doesn't have the holes pre-drilled for the rack rails? I have a 98 Cherokee and trying to figure out where to start. This is my daily drive, trying to get all my ducks in a row before I start drilling, so I've been a little hesitant. I also don't dont have a garage and it rains a lot in the summer! Very helpful tho, I'll be referencing back to this video once I get those holes drilled! Thanks!

  • @Cantinatollo1
    @Cantinatollo1 Рік тому

    Awesome video! Lots of detail and information. Thank you for sharing.

  • @blamattack1
    @blamattack1 3 місяці тому +1

    Hey, how the paint holding up after a few years? I have rusty patches and peeling paint on the roof of my zj, and debating on doing it myself with rattle cans. Thanks!

    • @JustJeep_It
      @JustJeep_It  3 місяці тому +1

      It’s holding up really good. No issues at all. I’m happy with the results..and surprised too. Lol. Good luck with your project!

  • @romeleisho1938
    @romeleisho1938 Рік тому

    Sorry stupid question what size drill bit did you use to make the holes?

  • @dstangman8951
    @dstangman8951 2 роки тому +1

    What is your tires size you are running. I know on a previous video you had 235/75r15 that what I'm running now and I have a 2 or 3½ inch lift on mine. And do you have any rubbing issues. Keep the video going I do enjoy them.

    • @JustJeep_It
      @JustJeep_It  2 роки тому +1

      Thank you!!!!! I’m running 31x10.5 with a 3 inch lift! No rubbing issues (using spacers) thanks for the comment!!!!!!

    • @dstangman8951
      @dstangman8951 2 роки тому +1

      @@JustJeep_It thanks for your rep5back. What kind of spacers are you running on your jeep

    • @JustJeep_It
      @JustJeep_It  2 роки тому +1

      @@dstangman8951 rough country 1.5 inch spacers. I technically don’t need them but it makes the turning radius better and fills out the wheel wells nicely.

  • @timhayes9137
    @timhayes9137 Рік тому

    What is the name of the nut sert tool .