Samsung Galaxy Tab 4 10.1 Digitizer Replacement
Вставка
- Опубліковано 28 лис 2014
- This video shows how to replace the Digitizer Only on a Samsung Tab 4 10.1, Please do not attempt this if you have never repaired portable electronics, Use this as a reference. Thank you! -Quality iRepairs inc.
- Розваги
Nice tut! Did it myself for the first time but you have to be careful. The digitizer on mine was broken into many tiny pieces and more difficult to peel off. I have used a hairdryer and a credit card. Don't use a knife (or other small sharp object) because you can easily damage the coating of the screen (like I did at the corner of the screen to make a beginning to peel off)! In my case not a real problem, just a tiny part however be careful. Peeling off the case (do this first) also needs some attention, I used the same credit card for it however don't push it to far into the case because you can rip off or damage a flat cable when hooked onto it. Clean everything with alcohol, removing dust and residue, before placing the new digitizer.
The new digitizer is sticky, very sticky. Be sure there is no dust around and screen is dust free. Because the home button came off when removing the old digitizer, I didn't know the exact location of the home button. Better use some tape on the hole of the homebutton, on front of the digitizer and put the homebutton into place on the backside so it will stick to the tape on the front to keep it into place. Now you can place the very sticky digitizer (with home button at once), I did it from left to right, start on the left and lift it down carefully, watch the flat cable when doing this (it must be below the screen and into the hole in the casing) and verify it's horizontal angle. Be careful, when you make a mistake it is very difficult to peel it off and start all over, do it slowly, very slowly.
After this I connect the wire to the connector, be gentle to handle this connector, easy to break, put some tape on the connectors and also on the flatcable itself like the other cables. This is to avoid (when you have to do it again or other reason) it is possible to hook onto this cable when taking it apart again.
Just post my experience here hopefully to be useful to anyone else.
Thank you so much! I needed to replace the LCD screen, and this solved the issue for me, as removing the digitizer gave me instant access to the LCD screen. That changeout was simple as can be.
Thanks! Was able to swap out a broken digitizer for a customer. Good stuff!
Perfect! Worked for me. Thanks for the video.
Thanks for this video. Super helpful!
thanks man really good video very helpful
Thank you! A real life saver.
thanks a lot for vid. was a bit afraid but it works just like in the vid. you saved me a fortune + i learned something. 2 notes though. be carefull so you dont accidently push some of the glue onto the lcd while you remove the digitizer. I did that accidently when i was talkning a corner. easy to get of though. and 2'nd i almost killed The homebutton. be carefull when you are closed to that one when you remove the digitizer. apart from that. awsome tutorial!
i got it repaired like 3 weeks ago for $100, now it's destroyed worse than last time and I'm not spending that much again 3 weeks later! This helped so much, maybe i'm a mess
A rubber case helps
great advice this way its easy to fix... super thank You
Thanks! Very nice help!
I used to the see how to open the screen connector's buckle, if I had not seen this video I might have tried opening it the wrong way and made thing worse. Didn't solve my issue but the method is solid haha, thanks
just take off the screen according the instructions, works fantastic, at first i was under the glass but after a 2nd look at the video I continued the right way under th adhesive tape... I downloaded this instruction for later use...
Great tutorial video,, thanks 4 sharing
thanks soooo mich fot this tutorial i was devastated when my screen cracked and couldnt find anybody to fix it where i live... great tutorial!!!!
Great tutorial
Thanks for the video. I appreciate the efforts when anyone shares his experience. Actually, I have a 2014 edition which has slightly different chassis and backplane design, hopefully the digitizer replacement part is not significantly different.
does any part of this replacement part connect to the recent and back buttons?
Hi . the new digitizer you put in did it come with film on it that you had to peel or did you have to apply any adhesive ?? Thanks
if your screen gets dark and staticy does that mean one of the connections came loose? Because the screen isnt cracked and it shows all signs of life besides that i cant see anything, the touch screen still works.
I did it. Thank you!
+Radu Vascan Yes Yes Yes Yes !!, All i did was goto unlockicloud24 com! and they removed it in less than 5 mins.. It's crazy just how easy it was !!
SUPER WORK !
Hey wey
I hade a little problem with switch cable connector .
You did it to fast but I got it anyways.
Thank you
Very very helpful video. By the way, is this the only way to extract the touchscreen? In most 7" chinese tablet I prefer to remove the mainboard, display and battery and leave the touch with the front cover. Only 3 screws off. The part when your bussines card get inside between the display and touch chills me out!
So my tab 4 glass screen isnt broken no cracks or anything of the sort. The image however is d8storted. Certain parts of the screen the image may be fuzzy and other spots image maybe split. Does this have to do with the digitizer as well or do i have a different issue?
I have a Samsung Galaxy SM-T533 and I didn't find the touchscreen replacement for it so I bought a SM-T530.do you think is going to work???
If the touch screen from the Tab 3 and Tab 4 compatible? thanks
what brand double tap u used sir? my touch screen open against went the tab get hot after use..
Is it possible to replace the digitizer on a Note 10.1 2014? Model SM-P605?
Sir do you have sm-t535 or compatible motherboard?
hi. I need to replace the touch screen to a Galaxy tab A. Do you know if it is the same procedure? ?
hi how are you? i have a galaxy note 2014 10.1 with the glass broken, do you know if in this tablet is similar?
Do you re-use the old adhesive or does the replacement come with adhesive?
would this be the same for the tab 4 7.0 to
who's watching this through their broken screen rightnow....👍
me
watching with my destroyed screen in front of my because its destroyed
Ayeeeee!
Adopted French Fry Yep mines cracked like fuck
Lol
Hello. Is this procedure for replacing the screen digitizer the same for the Samsung Galaxy Tab 4 8.0 T335? Thank you.
No I think it isn't because I ordered from ebay only the outer glass!
Thanks !
what were your symptoms before the repair?
mine has a cracked screen AND no images on the screen. it was cracked next to the home button, technically off the image area of the screen.
does this definitely mean that the lcd and digitizer/glass both have to be replaced? can the glass/digitizer cracked cause a "no image" symptom?
Mine too
I replace the the digzier screen power up every thing is working but but the touch screen not responding in suggestions.
is the t537 the same screen as this?
what type of glue do you use? is the glue already on the replacement screen?
pomogłeś Dziękuję
I need help with my Samsung Galaxy Tab 4. Everything is alright with it except for the fact that the screen will not turn sideways except for when I start playing a wide screen game like slender. Do you know what is wrong?
by any chance do you know how to fix the touch.. what I mean is that my tab is not crack but the corner touches don't work it works in the middle exempt all the edges
Your cable might not be connected rite or you'll need a new digitizer
I'm here watching this video then noticed your business card lol
I have a Tab 4 SM-330NU 8.0", does the digitizer come off the same way? I know the 3 has the glue all the way across the screen, but it looks like on the 4 10.1" it doesn't. So I'm hoping the 8.0" is the same as the 10.1 and not the 3.
***** I've found the replacement digitizer, and it appears to come without the LCD, it's the same as the part you replace in this video. It's just that no one seems to specify if the whole screen is glued or just the border.
***** Alright, thank you for the info, that makes things much simpler.
I have a hard time taking the back cover off, can you give me a hint, thank you
Can the same be done to a tab S ?
I'm holding one of these in my hands and seeing how easy it is to open, I'm scared.
The black part that's directly beneath the glass broke :( what is it called? Can I buy one of those? I was able to remove the shattered glass on my tablet but the black thing broke because it was so glued to the shattered glass it was impossible to remove it without breaking the black thing
ok great instruction but where do we buy the screen??
how did you take the battery conector out ? just pull up the cables?
***** thanks!
Any Ideas why it's not working on my side. I bought the replacement screen/digitizer on an official repair shop . Done it like the video.. but swipe didn't work. The connector is well fixed 🧐
if mine is black. Can I order white 1 ?? For same model???
if I have a black 1. But they have only white 1. Does it matter? will white 1 work?? does it make a difference, ordering white or black? ??
I have black screen. Can I order white 1?? Will it still work ?
Is it possible to get a replacement screen for the tab 4 7 inch? I cannot find one anywhere...
ive got some in - If you still need one let me know
Do you have a online shop?
I have brought this tab Model number t531 I had broken the digitizer where can I brought this digitizer
hi my tablet just have a big. on it it start but it doesn't show anything should I use thus method or get it repair
Siddhant Maheshwari I recommend repairs from the store you got it from. it takes only doing something tiny wrong and ending up with a even more broken tab 4
is it the same with the 7.0 tablet
i have a question my boy droped the tablet and the color on it is awful like it looks if some got a magnet and scribbled it
That sounds like one of the cables in the back is slightly loose. Mine did that, and I just opened the back and made sure both cables were connected tightly. Fixed my issue.
+Aquaria1 thank you for your help its working fine now
+hemi1500srt same happened to me
could you maybe tell us where one could get a digitizer?
***** ok thx but would this also work if the screen is just glitchy but works just fine?and also maybe tell me if we need to use the heat gun you used or if we can use the microwave/or a heat lamp/fan....the microwave was a joke....
what can i use if don't have a heat gun or blow dryer ?
hi
i tried to change screen but removed all lcd connection, accidentaly i broke the connector, how i can fix it?
So good idea plastique card !!
Where is a good place to get the digitizer? is there a part number? I cannot find one searching for SM-T533 digitizer
+david strachan Hi. I got the spare part from:
www.ebay.com/itm/White-OEM-Digitizer-Touch-Screen-for-Samsung-Galaxy-Note-10-1-SM-P600-P601-P605-/111883435627?hash=item1a0cc5be6b:g:nJAAAOSw-zxWo0iE
3 weeks to Mexico. I think that if you live in USA it will arrive sooner.
+Ricardo Barajas crap, they don't ship to canada.
thanks ! really was helpful ,.. why spend 70 euro if you can do it your self cheers man ,...
does tab 4 10.1 white has sim sloth for sim card ?
rithvik kumar yes it's by the volume buttons at the right of them
where I buy the spare???
Do you think using an iron to warm would be a good idea ?
No but you can use a blow dryer if you don't have a heat gun.
in fact, i did it with a iron to wax snow board and it worked pretty whell
Just fixed my sisters tablet and it went well but I messed up a little bit cuse I accidentally touched the glue and now it wouldn't stick but it is sticking a little, is there anything that I can do to fix that ??
Sharjeel Waris smear more glue on it
do you need to add more of the sticky stuff?
Harley_Bird glue
What about the adhesive for the new digitizer?
Thanks!
I did a search for a SM-T520. This is not a T520! Totally different. Maybe you could have specified the model! My lcd and dgitizer are glued together.
I did everything as shown and swipe wouldn't work properly. Redid ribbon tape connector and got nothing..no indication of function. It was worse. Reinserted ribbon twice more. Got the indication and bubbles but no full swipe capability or turn off functions. Touchscreen is defective new sometimes or what?
Hey bro I know this is an old vid, but is t800 tab s 10.5 the same?
+Quality iRepairs Sanford: iPhone, iPad & Samsung Repairs how would the process be different? I received a replacement and don't know how to apply it
+Quality iRepairs Sanford: iPhone, iPad & Samsung Repairs So how much it will be if i pass by?
Why do you use a tab 3 digi ?
My tab 4 10.1 is dead.. I would love to refurbish it entirely is there a video for that?
On the Tab 3 8" and 10" the LCD and glass came together in one piece
I wonder why they didn't do this on the tab 4 series
You prefer to pay more when you need to replace broken glass and throw away good, working LCD? ;]
dupakropkaosiem That's a good point. When they're both in one piece, you're paying nearly 3 times the price
Where do i get a digitizer with glue on it?
Je veux te dire merci beaucoup je l'ai réussi en 1 heure
This was bought to replace an old Lenovo tablet which was essentially too sluggish to cope with modern websites. ua-cam.com/users/postUgkxz4qYZoyAOb_hq_UbaKI6AsZX0FnoFm-U This tablet is fast, has a very clear display with built in optional eye comfort shield, great sound with Dolby Atmos, split screen option and numerous tweaks that I've not yet explored. I've plugged a wireless receiver into the i/o socket to connect a mouse if I need it and a bluetooth keyboard works fine - unlike the Lenevo which somehow would often garble the input. Battery life seems good. In short I'm very pleased with it
The entire screen of the digitizer was covered in adjesive. Took me 2 hours to clean entire screen. just making sure I'm doing it right let me know thanks
what do you mean "the entire screen"...?
cool
Careful about the power cable. I took out the entire harness and had to soldier it back
An buttons be extra carefull when taking the cover off.because if u dont u can break it in 2
THROUGH WATCH THIS VIDEO I OWN REPAIRED MY TAB
Good video, but next time use a credit card
Omg, haha
how much money is everything you got there (tools+new screen)
Ok
worked for me, unfortunately as I pressed it into place the button at the bottom didn't line up and i cracked the screen. Good info though
how much does this cost?
please tell the price how much it cost
So, I was doing perfect and everything was perfect and then I watched this and applied heat upon installing the new screen and clicking the back in place
.
LCD CRACKED DOWN TGE MIDDLE
Me too. But I bought a cheap screen from ebay. Cheapest possible replacement. Next time I will pay a little more...
A SAMSUNG FAZER UMA PODERIA MELHORAR A BATERIA DELA E NAO FAZER UMA DESGRAÇA DO CÃO DE UMA CAPA DESSA
i think i have the wrong tablet the digitizer has a lot of adhesive attaching to the lcd
SM P600
OMGGG 😅😅😅😅😱😱😱😱😱😱😱😱😱
I can't even see the cracks of your tablet because mine are in the way lol
AHMED
0K
4 tablets Samsung Galaxy Tab 10.1 screen you insert tabs 3