New BRUSHED Power for the Bandit! HOLMES!!
Вставка
- Опубліковано 6 гру 2022
- I had to try some different motors and these are both by Holmes Hobbies, links are below for both motors, check them out.
The motors I used
12t Trailmaster Sport
Amain bit.ly/3FzH5qO
Holmes Hobbies holmeshobbies.com/motors/brus...
15t Retro Sport
Holmes Hobbies holmeshobbies.com/motors/brus...
The parts I installed
Proline Slingshot
Amain bit.ly/3AJ9JmB
Horizon bit.ly/3ia3xO0
Amazon amzn.to/3AKR0ag
Ebay ebay.us/pdIhG7
Front VXL Bearing steering blocks
Amain bit.ly/3Osv6OG
Amazon amzn.to/3ES6qfq
Ebay ebay.us/wZOOUp
Rear VXL Stub Axle Bearing Carriers
Amain bit.ly/3tQZcSm
Amazon amzn.to/3ABBLjX (RPM)
Ebay ebay.us/mswNVC
Exotek Rear Drive Axles
Amain bit.ly/3Vg37nt
Ebay ebay.us/2d3w3m
RPM Front Shock Tower
Amain bit.ly/3UPnMit
Amazon amzn.to/3UXV3bm
Ebay ebay.us/ChjQrE
RPM Rear Shock Tower
Amain bit.ly/3EvL3z5
Ebay ebay.us/cR2Eps
Rear Adjustable 36mm Camber Links
Amain bit.ly/3XpS2lR
Ebay ebay.us/vtfQrr
Front Adjustable Camber Links
Amain bit.ly/3TVpmya
5x11x4 Bearings
Amain bit.ly/3i5li17
Ebay ebay.us/f5xk4U
Amazon amzn.to/3XkHN1X
Traxxas Bandit XL5
Amain bit.ly/3UFzYCn (Red)
Amain bit.ly/3Gl8HAP (Blue)
Flysky GT5
Amazon amzn.to/3rafrZr
Check out my new Affiliate website at www.ishop45.com I have a bunch there including Walmart, Amazon, Ebay, Amain, Horizon and more, just click the store you want, and shop as usual, thank you guys!
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
Amain Hobbies bit.ly/3cHmsHX
Horizon Hobby bit.ly/3tMTCB5
ArmedAmericanSupply (Clothing)
Buck Knives bit.ly/3yCoXZK
EMP Shield bit.ly/3Q7dMPE
HenyStar (Womens Clothing) bit.ly/3y7jDw2
BeardBrand (BeardStuff) bit.ly/3xD6af8
Maui and Sons (Surf Apparel) bit.ly/3aD4Z7Q
HeadBanger Lures (Fishing) bit.ly/3MIFpvZ
Harrelson (CBD) bit.ly/3NxQBLY
Luxury Yacht Vacations me160.isrefer.com/go/differen...
Get Upside, I use this every time I fill up and just let it earn and fro till Christmas time and cash out. It works and once you get used to it, it’s an easy habit.
Click this link or use promo code 9H6W8 to get an extra $2.22 bonus the first time you make a purchase. upside.app.link/9H6W8 - Розваги
Back in MY 'stock 2wd' professional race days, even a stock 27t 24 degree bushinged motor, the best motors' bushings we wore out, so lesser/no friction. 😁
The sand looks so cool in videos flying out from cars ripping round the track. An then with the paddle tires amazing!
Having one of these myself go back to the holmes 12t with stock gearing and put on 3s
I’m just looking forward to seeing more fun stuff. For fun you should try a Brushed motor with timing I really enjoyed it 👍
I think your gonna struggle a lot trying to race any kind of spec class until you replace the beach sand with actual clay dirt. Thats alot of excess weight your poor little bandit was transporting, lol. Bashing looks fine but that sand has to get into everything and eat up bearings, motors, gears, ect.
Believe it or not that send yes dies get everywhere but It doesn't eat the gears bearings maybe I can't really tell you there
Clay is super expensive here, I'd like to have it though
@@ExocagedRC 180 a load here
@@ExocagedRC I like it how it is. People gotta remember it was worse all dusty. Clay is boring
Go bandit go! Sweet demo
I run quite a few 2wd Tamiya buggies and trucks on 2S all with high RPM tuned motors. EVERYTHING gets hot within about 5 mins run time. Just part of the game running brushed. Only setup I can run all day is the Grasshopper with a 540 silver can 😁
It was also a useful and interesting video.😁😁😁
Try the arrma brushed motors. They work great in my stampede
I remember pre brushless systems I had two 9 turns in my emax with a novac esc. That thing ripped pretty good. I wish I still had it
I just checked one of my 12-turn Titans. These motors have 15 degrees of counter-clockwise timing. The reason I use higher turn motors is so I can gear higher without as much wear on the motor.
yeah the timing makes a difference, this holmes has 0 for crawlers so its kinda out of place in the bandit
that part is a traxxas gear ratio mesh spacer. they have like 10 different versions for different gear ratio-pinion sizes
You should check out the new brushed motors from Hobbywing.
I would limit it to factory brushless systems and hobbywing max10 combo on 2s
nah any brushed is fine no brushless for these
Would be cool to see a VXL Bandit with paddles running 3s on the track lol
wheelies for ever
Mine is 3s on the vinelion vxl system on the ho vo lipo let me clue ya this thing rips ass you'll enjoy it 🤘
I have the vinelion vxl motor & yes my bandit rips like hell but I wanna replace it with the castle or spektrum mamba
The lipo I'm running my bandit on is the hoo vo 3s
If possible I’d like to see the infraction mega 9t 570 can. My guess it would throw off the balance of the car
8 Turn crawl master in my banded, it rips you might want to try that one.
Faster than the 12t 3-slot?
@@ExocagedRC you are going to be able to fry a piece of bacon on the motor but yes, I believe it’s faster
Or the XL5ESC paired with the Arma magnum 12 turn is pretty fast I know that for a fact I ran that in my two wheel slash for some time and it was fast.
Would be interesting to see what could be done with a budget brushed power plant in a dedicated race buddy
Just go brushless and fix the motor limit to 21.5 or 17.5 so it's equal for everyone. It'll surely be alot more fun and less hassle
brushed is cheaper
@@ExocagedRC yes of course but a budget friendly brushless system isn't going to break the bank compared to burning out brushed motors racing around the track
I do run a custom motor it is a 8 turn triple brush motor on the castle Mama Max ESC on 3s on a 32 pitch 62 tooth and a 19 tooth pinion
speaker was not on it was making an echoing in the back round during that last video. can you fix that ?
Try gears and a 590! Lol maybe a 8 turn 550, or the lowest turn you can get? Idk be cool to see
Yeah, I haven't given up on brushed.
I will stay brushed here.
Why not try the craw master 8 turn
you should change the slpper clutch shaft they break on those trans to the 272R shaft i have the vxl with rpm arms and proline trans my second one i ever owned
Is there enough power to break that on this?
@@ExocagedRC im not sure if a brushed motor would break it....
the pin snaps, not the actual shaft. He's only running on 2s for a spec class, dont think he will have an issue.
I’ve never had an issue with the stock drive shafts plus there lighter in weight. Maybe help the motor spool up idk.
I didn't want a known weakness to happen with the paddles and a bad landing
The Titan 12T is a good motor. Youd be amazed at the difference a race prepped tranny would make , youd definitely hit the teens , the factory grease in there is like glue and adds soooo much resistance. Great video thank you , Ive always wanted to compare a 12T 550 to a 15T 540 .
Do you have any videos of racing on your track? Like competitive racing with buddies? That’d be cool to watch. No matter what class
yeah I post videos of us Exoplex racing we have a lot of fun
Hey, try this one: Turnigy XK-3665 3190KV Brushless Inrunner. Its gonna fly 😀
gotta stay brushed for this one
I just found a badass RS 775 ball bearing on Ali bro
Man if you want a hot brushed motor, get the Surpass "power" series 12t 550. I know it's a cheapo Chinese job, but they all are, even the Holmes(The brushed cheap ones). It's full bearing, rebuildable, and adjustable timing. I've got three of them. One in a Tamiya Fire Dragon and it will do 45mph on 2s using a 1060 HW esc. They're fast man, I'm telling you. They've got really strong magnets and scream! Just make sure you order the"Power"series, if you try it. It's worth the 30.00.
Any experience with the Injora motors? They have a front bearing as well. Just would like to know if anyone has experience with one before I might purchase.
@Jack Anapes no, but they just buy other manufacturers stuff and rebrand it.
@@cwthemachinist I see, would you recommend one, or do you believe there are better options? Don't want a rebuildable motor as I am no racer, just looking for a replacement motor for my Redcat Dukono and was looking at the Injora 550 brushed motor.
@Jack Anapes I'm not sure about the Injora as far as quality. I don't think they are very good. I can speak about those Surpass 550 "Power" series though. The 12 turn are super fast and powerful for a brushed motor. Even if you don't need to rebuild, it's a super value for money. I would think of it like the really cheap ones burn up and you've gotta throw it out and get another. The Surpass you can replace whatever parts you need if it burns up instead of buying another. But if you're just wanting super inexpensive, then use the Injora.
@@cwthemachinist Do you believe the 12 turn might be too fast for the Dukono? Or maybe install low pinion gear to maybe compensate for the motor turns? I know the Dukono has a 19 turn 550, didn't know that a 12 turn might work?
The sand is dragging your RCs down
yep for sure, it limits us on gearing due to excessive heat if we go too far
3S volt up and gear down!
So do you continue to push the bandit or is the project dead? I found it quite interesting to see low level racing equipment used to the max.
Get the 86t spur
its got the 83 in it as best I can tell
Think you need a race motor not a crawler motor
You need a race brushed motor
Would an arrma 9 turn be any faster? Or are arrma brushed motors trash?
A 9t would be faster for sure. Not sure on how durable they are.
Have you thought about removing the ring around both motors?
It could increase the rpm at the price of less amount of torque.
If not, you could try Team Brood brushed motors.
Hey Exo,
Can we go ahead and run this class on 3s? I don't have any 2s packs for this buggy.. I've been running the XL5-HV on 3s with the Titan 12 turn currently (I also have the Holmes 550 12t to test out). I've considered trying the Arrma 570 9 turn, but it's 30 bucks and I don't know if the esc will handle it.
gotta keep this one cheap what plug is on yours? I may have a battery you can use, also I'm not so sure the XL5 can handle a 9t yet.
@@ExocagedRC This one still uses the TRX plug because I run my traxxas 3s packs that are for my TRX4. It's really not that big of a deal, I can pickup a couple 2s packs for this class, I was just happy with the performance of the 3s packs being able to clear the jumps.
Drop down to 26 tooth
I don't think members got the notifications for these videos...
I really expected the 12t to be faster...
I used to race 2wd buggy, late '80s and early '90s. When your car hits top speed at the end of the longest straight, you've got it about right. Good rule to follow no matter what size the track is. Another thing affected by gearing is run time. Figure out how long a battery will last doing laps with a nimh and a lipo. See what people show up with, maybe run 2 classes if the difference is significant.
Stick that shim in a junk drawer. I never use mine anymore.