Hi thanks for the video. I have what to do timing chain replacement on my RAV4 2.4L 4WD without taking the engine out. Which tips can you give me to do this job . Thanks
hello peter thank you for a valuable upload.. I ve to ask you something please answer me if possible.. I'm working on automotive. from Malaysia. recentky i ve faced a problem with honda city ivtec ctv gearbox. problem is when I'm on P,N no problem with rpm or idling.as soon as shifted gear to D,L,S,R idling going down 600/500/650. after 1/2 minute going to stable 760 rpm. everytime change gear facing the same problem. already changed a t.body,checked egr valve,vacume lleacked,checked gear solonoieds but problem has remain same..
Hi Peter, is the Crankshaft Mark on the Pulley always set at Number "10"?,I have a Rav 4 2008 with same Engine and Crank Marks are set at "0". A Mechanic recently changed Piston Rings but Engine appears to be running Rich from exhaust smoke with high fuel consumption.So decided to check whether timing was correctly done.I want to be sure if the crank mark should be at "10" or "0"..thanks!
HELLO MR. PETER FINN,I HAVE MY LITTLE COMENTS REGARDING FOR THIS FIXING THE TIMING OF RAV 4 BTDC 10 degrees?TIMING But how can i fix to the ignition that we have to degrees 10 BTDC.THAT MAKE ME ACCURATE IN THE FIRING ORDER....THANK YOU VERY MUCH...
I watched a few of your videos on this Toyota timing chain, helpful videos, however I set the chain in all 3 of the markings but the chain skips a gear when I turn the crankshaft bolt to see if the chain runs its course correctly, any thoughts?
Hello, very well explained, I want to know if you can tell me how to calibrate and if you give me the values for each exhaust valve as for intake of this three-cylinder TOYOTA YARIS second series 2° XP9 (2005/2011)
Do you have any idea what the km limit is when the timing chain needs to be changed for Toyota Avansis 2.0 petrol? I want to buy one that has 170,000 km. Do you think it will take you at least 50,000km?
Also confused about this becoz on bonnet of the Rav 4,it says 10° BTDC, The Engine Manual says 0°...cam gear Marks appear to align with crankshaft pulley at 0° on my RAV 4
Hi thanks for the video. I have what to do timing chain replacement on my RAV4 2.4L 4WD without taking the engine out. Which tips can you give me to do this job . Thanks
I'm curious what position should the keyway be for the crankshaft pulley? Mine is roughly at 11oclock. Thank you for the video!
hello peter thank you for a valuable upload..
I ve to ask you something please answer me if possible..
I'm working on automotive. from Malaysia. recentky i ve faced a problem with honda city ivtec ctv gearbox.
problem is when I'm on P,N no problem with rpm or idling.as soon as shifted gear to D,L,S,R idling going down 600/500/650.
after 1/2 minute going to stable 760 rpm.
everytime change gear facing the same problem.
already changed a t.body,checked egr valve,vacume lleacked,checked gear solonoieds but problem has remain same..
Thank u. U helped me out!!
Thank You for feedback. :-)
good morning Bill Rimmer thank you for helping me about Toyota scion timing point speaking from Liberia
Thanks for your video dear i watch many videos but i can't see your face so please show your face thanks
Hi Peter, is the Crankshaft Mark on the Pulley always set at Number "10"?,I have a Rav 4 2008 with same Engine and Crank Marks are set at "0".
A Mechanic recently changed Piston Rings but Engine appears to be running Rich from exhaust smoke with high fuel consumption.So decided to check whether timing was correctly done.I want to be sure if the crank mark should be at "10" or "0"..thanks!
Hi, sorry. I need to check this issue.
thanks you. it is very well
Thanks. :-) I really appreciate your comment.
whats the sensor to the left on top of the engine... is that the oil control timing valve?
HELLO MR. PETER FINN,I HAVE MY LITTLE COMENTS REGARDING FOR THIS FIXING THE TIMING OF RAV 4 BTDC 10 degrees?TIMING But how can i fix to the ignition that we have to degrees 10 BTDC.THAT MAKE ME ACCURATE IN THE FIRING ORDER....THANK YOU VERY MUCH...
A 2AZ-FXE engine. Has an E and I both with a dot under each letter, no other mark this is on the exhaust gear what will be the right mark for timing
Hi, I need to do new video.
thank you very much great help very grateful to you thanks again.
Thank You. :-)
Thank You Peter Finn
I think this machine same of Toyota Estima 2,4.
Yes, maybe. Same engine type?
Peter Finn
Toyota Estima use Engine 2AZ 2.4Ltr
Same engine. :-)
No disrespect Toyota service says rotate counter clockwise when setting tensioner. Thank you
I watched a few of your videos on this Toyota timing chain, helpful videos, however I set the chain in all 3 of the markings but the chain skips a gear when I turn the crankshaft bolt to see if the chain runs its course correctly, any thoughts?
Do it again. Compress chain with fingers
Hello, very well explained, I want to know if you can tell me how to calibrate and if you give me the values for each exhaust valve as for intake of this three-cylinder TOYOTA YARIS second series 2° XP9 (2005/2011)
Thank you for your message. I have read your message. 😀👍
Ok it says to rotate ccw to unhook the catch then cw to snap out the plunger. This is all after you load the tensioner by latching the plunger
I like this job too much
Thanks for info. :-)
Nicc
I have camry 2008 it is saund ger a tomorrow but after 4 mint sount low..
what hapen ples
Hi, please take video and send link to me
Do you have any idea what the km limit is when the timing chain needs to be changed for Toyota Avansis 2.0 petrol?
I want to buy one that has 170,000 km.
Do you think it will take you at least 50,000km?
Toyota 2.0 is Robust like Steel. 2.0 engine Made to last +400 000km. So.... please replace the chain, when your odo is +400 000 km. 👍👌
Merci infiniment à vous
👍 You're welcome.
👍😃
Thanks
How to adjust 2000 Toyota Rav4 timing.
Hi Peter...My Toyota RAV4 timing chain does not have a timing mark.Im having problem trying to get it work.Please help.
Good comment 👍
in the last few mins of the video the cam chain slacks off between the cams, is this normal?
Yes
thats great thanks, do mr2 vvti small end bearing wear? i have a rattle
Chain tensioner has not been applied yet!
The tensioner is deployed already.It does because he was pausing the turning.Otherwise when the engine is running out of such things are rare
Why do you put it to 10°c, because in the book it says it has to be on the top not 10°c, that's where I get confused
I think that my way is Ok.
Also confused about this becoz on bonnet of the Rav 4,it says 10° BTDC, The Engine Manual says 0°...cam gear Marks appear to align with crankshaft pulley at 0° on my RAV 4
GMANN997 XxBANGYBIRDSxX books also says rotate ccw to unload tensioner
AIl those marks are meant to be used according to your preference.
Are you really sure crank pully is at 10degrees, not Zero. The Toyota shop manual has 0 degrees.
Ok
Issa
Thanks for comment 👍😀
не фига себе у него акцент
Thank You Sir.
it would have been interesting if it was in english
Noted 👍
That timing is still not correct. You need special timing tools to set that timing
Thanks for comment. 👍
No you don't. Even the Toyota manual says that's how you set the timing.
Ibe
I did not understand. I have a 2009 rav4 with 2 phasers. You are not very good
Noted. 👍😃