Son, you are living proof that it's hard work, NOT luck, that will change the world. Every time I tune in to this channel you blow me away by making one of these dinosaurs run. Maybe luck had a little to do with it, but not quitting, hard work and intelligence is what made that old Hyster go!!
Your the first time I have left a comment. I am 76 female and I have truly enjoyed watching you use your knowledge to fix this piece of machinery when young we used to work on cars. So enjoyable. Thank you.
You and Andrew Camarata certainly have an affinity for saving and utilizing old equipment. Then, squeezing every bit of useful life out of it. I could feel your satisfaction in bringing that baby back to life. Well done!
they don't always build them like they used to. obviously some newer is better but, for some dozers and fork lifts the old is just as good. or better if built to last
Compression numbers are NOT mind blowing. They are a result of YOUR due diligence in prepping the cylinders/valves etc BEFORE attempting a start. Done exactly the way it should be. Congratulations on your success. Love your enthusiasm!
i have so much respect and admiration for your attention to detail approaches to your work. It is but one reason why your channel is so successful. You do a great job of explaining procedures to those of us who are not mechanically inclined. I have learned a great deal from watching your channel. Thank you !!!
You know I have watched most of your videos.. old red others you fixed.. it’s all good here.. at 70 years your so fun to watch.. keep going kid..you think the right way. .. I am all in on watching you..
I watch a lot of "will it start" and revival type videos, but you are the first I've seen that does it the proper way. Or at the very least, shows it on the video
I'm a yard manager and forklift driver for a builders merchants so it's great to see someone bringing old forklifts back to life and enjoying them again!I'm quite into everything counterbalance forklift so watching these videos is so nice to see! Well done for bringing this great machine back to life!
Just a high-five and a thanks for the walk thru as you revived this motor. The compression check, simple as it may seem to most, was a great moment of learning for me. I have the compression tool set & am 'reviving' an old F600 dump truck.
I suggest the name ‘Koldy’, it is the name of a yellow rubber duck. The Hyster is Yellow, with the (xtra) air front tires it will float on uneven ground, the engine is red like the beak. Love your videos.
Made my day and I know it's simple but the first name in my head was Harry Hyster. Maybe it's too simple but the best dog we ever had was copper coloured and thst was it. Love at first sight and he was Copper for fifteen years. Whatever it's your truck and I guess there's smarter suggestions but when you need a lift in the yard just ask Harry.
The seals on the control valves are "O" rings just under the cover plate on mine. You have side shift, I'm jealous! I maintained on of these H60's for a manufacturing plant in the 1990's. The driver did everything he could to break it. The best he could do was to break two sets of ujoints. I now own one that lived at a fertilizer plant. MAJOR corrosion!! Burns oil like it's free, but it holds down on the mosquitos... It's off road ability is great! I've used it for logging a tree or two on my little "farm". It will even push my old Greyhound motor home.
If you notice... there is a small notch in the point body just below (as seen in video) the contacts. There is a corresponding slot in the distributor base plate. Put a flat blade screwdriver in there and you can fine adjust your points then lock them down with another screwdriver.
For best power and economy adjust the points using a dwell meter. Compensates /averages out worn bushings and bent shaft. My memory says 32- 34 degrees- don't think I have a manual any more for industrial engines.
I am a forklift operator. Everything from an old 3800 lb capacity CAT stand up to a 12, 000 lb capacity Mitsubishi sit down. Nice job on the Hyster, she's a beauty. Wish we had someone with your skills on our maintenance team.
at the 3-4 minute mark...at the lower right (camera view) of the points there is a little hole with a slot in the points unit, and a slot in the distributer...you tighten the points screw so it grips a bit then stick a small screwdriver in that hole so that you can lever the points around as you check with the feeler gauge ...very simple...once they are at the gap you want, you tighten the screw a bit more and recheck that the gap didn't change...
glad i read the comments. I was going to make the same point. It is sure better than the fumbling you have to do to hold the points tight on the gauge, hold them against the cam, hold the gauge in them and then tighten the screw with your spare hand. Maybe he is used to working more on diesels and not very many distributors.
The forklift from cars is called Guido. If you really wanted to have fun with it you could paint it sky blue with eyes and mouth. Or just print a picture of guido
Here is a tip from an old skooler, that slot at the end of the stationary half of the points is for fine gap adjustment, stick a screwdriver in it wth the lock screw snug and twist open or closed to desired gap
My dear friend conscientious meticulous true excellent mechanic !!! it is a pleasure to watch you work with method cleanliness and often high precision !!! OK let us see this second part of video, Warm regards my friend !!
Chet Larson has a big rig with a locked up engine. I know you could fix it. You two should get together and make the ULTIMATE video!!! LARSON FARMS + SALVAGE WORKSHOP = GOLD!
The leaking hydraulics are normal it's from sitting , ESPECIALLY the control module , it just needs a seal kit and a flush and it should work fine. I fixed a forklift when I was working for the army that had a problem like this. Sat for years and the seals just got hard and stopped working.
I'm excited to see what you have for us. I watch everything you put out and it's always top of my list of things to watch on UA-cam. Keep up the good work.
I once saw a guy "fix" a leaking oils seal on a power steering unit by draining the oil out of it and filling it with gasoline, just the pump itself. Left it an hour or two then drained it and put the correct fluid back in, it was on a big old Dodge RAM camper truck. It did not leak after this and I drove it 12,000 plus more miles. Nope it wasn't me it was a country repair shop where I stopped to buy more power steering fluid. Anyone else seen this done or is it quite normal ?.
Im going with the "Heyster Myster"!!!!! Also I thought it was brilliant that you covered your licence plate on your van with the Salvage Workshop logo lol nice little touch!
You did this one right. When I saw you knock the rust off with a cylinder hone, I thought... OH Yeah. For the hydraulic cylinder leaks... look into AT 205 seal conditioner. I've used it for leaking, old hydraulic cylinders and it works like magic. Used it to fix Acura power steering seal.. Boat hydraulic cylinders that were puking out fluid. AT 205 is the bomb! Seriously. For real. zies.
Great video. These machines will not get stuck on soft ground as long as you are moving when you steer. Don't move when you're steering and you're stuck. Keep up the videos. Cheers
Damn that was a quick hour! Gotta admit I was sitting here grinning like an idiot the whole time. For a name, if you keep it yellow, like the excellent old movie, you can call it 'Old Yeller' in reference to the star of the movie - an old yellow lab dog. Thanks VERY much for the show! (I'm going to check if you have any coffee mug merchandise)
The screwdriver style that you made your jet tool from is called "clutch head". Hardly see them anymore but at one time they were used in Olsen truck bodies as well as GM bus bodies and a few other applications.
The reason you don't have air tires in the rear is the massive counterweight, you would wear out the air tires' immediately they have to be solid tires
Totally incorrect - The standard tyres were pneumatic. Minimum 80 PSI. Solid tyres were used in locations were punctures were prevalent. For work in containers and the like air tyres were preferred as they didn't pound the steel floors as much. The H60C thru H90C was the mainstay product for Hyster lift truck range for many many years and the envy of many other brands.
@@SalvageWorkshop It all depend on the application you use the Pneumatic or solid tires for. Around a workshop helping with lifting etc, Pneumatic tires. If for yard work ie loading/unloading trucks etc coming in and out, Solid tires.
@@steveaw5895 right you are!! They also used them for the horn ring on old GM steering wheels. They are SO obsolete. I had an old Craftsman one that I wanted replaced under warranty. The guy in the store said just take another one.
This is amazing 👏, i cant believe how good its running, ive always wondered if a locked up engine with rust cylinders could be revived with a hone job without removing the pistons. Good job man! You did what many have thought about doing but never dared to actually do it to see if it'll work. Mad props!
Excellent, clean it up then paint it. Dual wheels on front also, air tires on rear would be a great asset on your property. Good luck ! You are doing a great job. All the best.
ain't that the truth! You can have a tool in the box for years but the moment you modify it or pass it on to someone else, almost guaranteed within the week you'll find yourself needing it to progress a job that just can't be done without it. Way of the world, always has been always will. (Also applies to unused parts/junk you kept "just in case" it comes in useful one day. That day is generally 7 or less days from the moment you had a clear out and made space for other useful stuff.)
The "C5" in the serial number is known as the unit code, the "D" is the factory code which in this case is Danville. The last letter "N" is the year of manufacture which is most likely 1969 as the last production year for that code was 2015 and the one before that was 1992..
@@flir67man84 My Hyster Spec Book says Danville IL, which i think is Illinois (I'm British), a quick google search confirms Hyster dos have a factory there....
Nice gas tank setup. I built 1 of those myself in a 5 gallon bucket. Mounted an in tank electric fuel pump from a car with 2 long leads & alligator clips. Teed off the fuel line with a gauge, valve & return hose to the bucket so I could regulate the pressure from zero to close to 100 PSI. Worked great for moving stuff with bad fuel pumps up onto my lift.
Your videos are very thorough & I look forward to them. After nearly 50 yrs as a pro & now amateur (went into electronics somewhere..) this kind of stuff is now my fun! I just gave up on the Zenith carb on my '72 Case 30+4 and fabbed (you can see my amateur in it..) a manifold and bought a$50 EBay VW 34 pict and installed same.. Electric choke & shutoff... Fired on the 1ST key and runs better than ever!!
Did not think you were going to fix that many people would have given up on that forklift great skill & patience don't understand the thumbs down. Regards Steve UK London
Here's something of interest: "The name "Hyster" was allegedly derived from a term commonly used by logging workers in the Pacific Northwest at the end of the 19th century. When a load of lumber was ready to be transported, a logger would yell "hoist 'er". According to the Hyster Company web page, this term became synonymous with Hyster trucks." (Google, of course!)
I run a Hyster 90 at work. It's new, but you can see the influence on the new machine from the old one. They are the proverbial "brick shiznithouse". We run them just about 24 7 with few problems. Engine is a Kubota 4 cyl that displaces around 4 liters! The older ones have a 4.3 Chevy V6, all on LPG. Congratulations on getting the old bird home. Runs impressively considering the condition you found it in.
Matt, in part 1 there must be a tool for this You had it in you're hand lol love this channel you are one hard working young man,as you said earlier if you don't ask you don't learn, that's it in a nutshell regards from Scotland 🇬🇧🏴👍🛠️
I LUV this kinda stuff!!! Its a win-win... like u said,.. u sa ed it from the s rap yard,.. and u did great quality work (u should b proud of urself) , and u now have a VERY USEFUL TOOL/MACHINE! Please keep us posted with new videos of this. And maybe a new paint job in the near future? TSC has great single stage equipment paint,.. what a difference it would make on appearance.. good luck my friend
Congratulation Myster, I love the way you tell small details that help making sense to the bigger picture.I really start to understand motor and mecanic thanks to you. Merci
Son, you are living proof that it's hard work, NOT luck, that will change the world. Every time I tune in to this channel you blow me away by making one of these dinosaurs run. Maybe luck had a little to do with it, but not quitting, hard work and intelligence is what made that old Hyster go!!
Thank you Greg! I truly appreciate that!
Good to see a skilled Mechanic at work fixing old school equipment.
Your the first time I have left a comment. I am 76 female and I have truly enjoyed watching you use your knowledge to fix this piece of machinery when young we used to work on cars. So enjoyable. Thank you.
Wow, thank you! Glad you enjoy the videos! Lots more to come!
You and Andrew Camarata certainly have an affinity for saving and utilizing old equipment. Then, squeezing every bit of useful life out of it. I could feel your satisfaction in bringing that baby back to life.
Well done!
Diesel Creek is another good machine salvage channel.
@@lordgarak
Just popped here to make the exact same comment. 😃😃👍👍
@@lordgarak Salvage and Matt at Diesel Ck don't whine like Camarata.
they don't always build them like they used to. obviously some newer is better but, for some dozers and fork lifts the old is just as good. or better if built to last
What about the carb god,Mustie1,he can save almost anything.
I did not expect this so soon, what a treat.
we had the mate to it.at the shop.....it was a standard .with clutch set up.........and we called it ,the Shyster......
Compression numbers are NOT mind blowing. They are a result of YOUR due diligence in prepping the cylinders/valves etc BEFORE attempting a start. Done exactly the way it should be. Congratulations on your success. Love your enthusiasm!
Man, I can't believe the work you put into these machines. Don't know when you have time to make a living.....Good job
I thinks a fella has been watchin some VGG!
Love that guy as much as a straight man can! 😂😂😂👍
VGG ROCKS AND RULES U-TUBE " 100" Cheers from Jacksonville Florida
I had the same thought!
Of course I've been watching VGG!! Who hasn't? Derek is AWESOME!
You are both awesome. I’d love to have the space and time and money to do what you guys do. Keep up the good work!
“I’ll Be Dipped.”
We have a hyster 50 made in 69 that is absolutely worn out, but starts and runs and just won’t die. We have had it since 84
i have so much respect and admiration for your attention to detail approaches to your work. It is but one reason why your channel is so successful. You do a great job of explaining procedures to those of us who are not mechanically inclined. I have learned a great deal from watching your channel. Thank you !!!
Thank you Larry! That is a true compliment!
Im admiring that the put a fricken firing order on the casting. Great engineers on that one.
You have that old school "never say die" attitude.. Excellent work...
The quick part 2 follow up was really appreciated for Sunday watchin'
Great save from the scrapper!
i would dump that carb and put a stromberg 97 on it .😜
You know I have watched most of your videos.. old red others you fixed.. it’s all good here.. at 70 years your so fun to watch.. keep going kid..you think the right way. .. I am all in on watching you..
Lots of hard work on this one! VERY satisfying to hear it run!
I watch a lot of "will it start" and revival type videos, but you are the first I've seen that does it the proper way. Or at the very least, shows it on the video
Phoenix would be a good name being you brought it back from the dead.
That'd be spiffy.
I was thinking "Petunia" .
I third! Lol
I'm a yard manager and forklift driver for a builders merchants so it's great to see someone bringing old forklifts back to life and enjoying them again!I'm quite into everything counterbalance forklift so watching these videos is so nice to see! Well done for bringing this great machine back to life!
"Ole yeller" is an appropriate name. Love your videos.
Second that
I concur
"Old Yeller" got put down, this is rising up whoever it was that mentioned the "Phoenix" was appropriate in my opinion
Just make sure it has its rabies shots!
My first thought exactly.
Dude this is the real restoration,no shit like restoring a lighter or some kind of simple stuff, you're a legend mate, keep it up 👏
Amazing how good that engine sounds considering the abuse it suffered, you have just made a master level save👍👍👍
Yeah that in frame "rehab" was shade tree mechanic-ery at it's best.
@@TKevinBlanc Funny thing is, i was LITERALLY under a shade tree workin on this one!
#2
Top Job and interesting. It is so good to see an old machine get put back in to every day use.
I love seeing your excitement when you get stuff running. You were really pumped when Old Red fired up. Good for you brother. 👍
I like how you explain things so people can learn how to do things for themselves
Just a high-five and a thanks for the walk thru as you revived this motor. The compression check, simple as it may seem to most, was a great moment of learning for me. I have the compression tool set & am 'reviving' an old F600 dump truck.
"Mr. Hyster" for president!
I honestly didn't think that You can make a working engine out of that pile of scrap metal. Congratulations!
The "yellow Submarine ".... really great vid man .. lots of info on these two vids ... well done ..
I suggest the name ‘Koldy’, it is the name of a yellow rubber duck. The Hyster is Yellow, with the (xtra) air front tires it will float on uneven ground, the engine is red like the beak. Love your videos.
That Screw Diver you modified I was told is called a Clutch Head Screw, use to be used in old Travel Trailers. I ran into them in my Dad's 1960 Nomad.
After seeing those pistons and sleeves, I thought, if he gets this thing running, he is the best mechanic on UA-cam. And he did it....
Made my day and I know it's simple but the first name in my head was Harry Hyster. Maybe it's too simple but the best dog we ever had was copper coloured and thst was it. Love at first sight and he was Copper for fifteen years. Whatever it's your truck and I guess there's smarter suggestions but when you need a lift in the yard just ask Harry.
Interesting way to solve removal tool problem! Really enjoyed this episode!
I hope there's a part 3... I'd love to see this 'M'yster in action. ;)
HA! I said the Hyster Myster too!!!!
Ye ol' yellow Myster,... Cool!
Miraculous, I learned a lot from these two videos. Thanks from 🇨🇦
HYLDA THE HYSTER is my vote... Great Job! Thanks for sharing
The seals on the control valves are "O" rings just under the cover plate on mine. You have side shift, I'm jealous! I maintained on of these H60's for a manufacturing plant in the 1990's. The driver did everything he could to break it. The best he could do was to break two sets of ujoints. I now own one that lived at a fertilizer plant. MAJOR corrosion!! Burns oil like it's free, but it holds down on the mosquitos... It's off road ability is great! I've used it for logging a tree or two on my little "farm". It will even push my old Greyhound motor home.
Since you like dogs, call it ol' yellow.
You're a very talented young man.
Have a Jesus filled day
Greg in Michigan
Ol' Yeller would be the perfect name!
Amen brother re: choice of names and the Lord; *God bless.*
Dan from West Michigan.
@@DanKoning777
West Michigan?
We're near Kalamazoo
@@greghomestead8366 // I'm only about 45 minutes from Kalamazoo; towards Wayland/Byron Center. Small world.
Long live the Shyster, job well done!!
If you notice... there is a small notch in the point body just below (as seen in video) the contacts. There is a corresponding slot in the distributor base plate. Put a flat blade screwdriver in there and you can fine adjust your points then lock them down with another screwdriver.
The one and only, FORKY!!!
Play Safe From Elliot Lake Ontario Canada.
slot in the points base plate for screwdriver to adjust. just snug up screw then adjust.
For best power and economy adjust the points using a dwell meter. Compensates /averages out worn bushings and bent shaft. My memory says 32- 34 degrees- don't think I have a manual any more for industrial engines.
I am a forklift operator. Everything from an old 3800 lb capacity CAT stand up to a 12, 000 lb capacity Mitsubishi sit down. Nice job on the Hyster, she's a beauty. Wish we had someone with your skills on our maintenance team.
at the 3-4 minute mark...at the lower right (camera view) of the points there is a little hole with a slot in the points unit, and a slot in the distributer...you tighten the points screw so it grips a bit then stick a small screwdriver in that hole so that you can lever the points around as you check with the feeler gauge ...very simple...once they are at the gap you want, you tighten the screw a bit more and recheck that the gap didn't change...
glad i read the comments. I was going to make the same point. It is sure better than the fumbling you have to do to hold the points tight on the gauge, hold them against the cam, hold the gauge in them and then tighten the screw with your spare hand. Maybe he is used to working more on diesels and not very many distributors.
You are one heck of a mechanic. We'll done
The forklift from cars is called Guido. If you really wanted to have fun with it you could paint it sky blue with eyes and mouth. Or just print a picture of guido
Y
I would have suggested "Hiram," but Guido is good.
I was going to suggest Shyster, but Guido works too! :-)
Nicely done. Call it old Yeller!
hysteria is what I have been calling it :D since it's a hyster and this was crazy :D
YELLOW JACKET would be a GREAT NAME for the New FORKLIFT.
Here is a tip from an old skooler, that slot at the end of the stationary half of the points is for fine gap adjustment, stick a screwdriver in it wth the lock screw snug and twist open or closed to desired gap
That's how I always did it on my VW van.
My dear friend conscientious meticulous true excellent mechanic !!! it is a pleasure to watch you work with method cleanliness and often high precision !!! OK let us see this second part of video,
Warm regards my friend !!
The compression on Cyl #6 was very surprising. Good work.
Chet Larson has a big rig with a locked up engine. I know you could fix it. You two should get together and make the ULTIMATE video!!! LARSON FARMS + SALVAGE WORKSHOP = GOLD!
The leaking hydraulics are normal it's from sitting , ESPECIALLY the control module , it just needs a seal kit and a flush and it should work fine. I fixed a forklift when I was working for the army that had a problem like this. Sat for years and the seals just got hard and stopped working.
I totally believe that, bit the reason it's leaking isn't normal! Have no fear, ill show you!
I'm excited to see what you have for us. I watch everything you put out and it's always top of my list of things to watch on UA-cam. Keep up the good work.
I once saw a guy "fix" a leaking oils seal on a power steering unit by draining the oil out of it and filling it with gasoline, just the pump itself. Left it an hour or two then drained it and put the correct fluid back in, it was on a big old Dodge RAM camper truck. It did not leak after this and I drove it 12,000 plus more miles. Nope it wasn't me it was a country repair shop where I stopped to buy more power steering fluid. Anyone else seen this done or is it quite normal ?.
"Back from the Dead ". I am a sucker for this kind of work ! Engine sounds so good ! Thank you for this wonderful video .
Im going with the "Heyster Myster"!!!!! Also I thought it was brilliant that you covered your licence plate on your van with the Salvage Workshop logo lol nice little touch!
You did this one right. When I saw you knock the rust off with a cylinder hone, I thought... OH Yeah. For the hydraulic cylinder leaks... look into AT 205 seal conditioner. I've used it for leaking, old hydraulic cylinders and it works like magic. Used it to fix Acura power steering seal.. Boat hydraulic cylinders that were puking out fluid. AT 205 is the bomb! Seriously. For real. zies.
Nice save for sure, would be nice to see a couple more video's on restoring the mast etc👍
You should try a shotgun bore brush for cleanup of the accelerator pump next time. Great videos. Keep up the great work 👍
Great video. These machines will not get stuck on soft ground as long as you are moving when you steer. Don't move when you're steering and you're stuck. Keep up the videos. Cheers
Nice work 👍
Thank you!
cooool
@@SalvageWorkshop you better be forklift certified
24:30:50
I have a Hyster H60C that was made in 1965 that I'm about to start restoring. I'm sure these videos will be very helpful to me. Thanks in advance!
Damn that was a quick hour! Gotta admit I was sitting here grinning like an idiot the whole time. For a name, if you keep it yellow, like the excellent old movie, you can call it 'Old Yeller' in reference to the star of the movie - an old yellow lab dog. Thanks VERY much for the show! (I'm going to check if you have any coffee mug merchandise)
Nice job. Really great to have. Let's get those cylinders fixed on O'L Hester. Thanks!
The screwdriver style that you made your jet tool from is called "clutch head". Hardly see them anymore but at one time they were used in Olsen truck bodies as well as GM bus bodies and a few other applications.
Was just going to say the same thing. My '49 GMC 2 Ton uses those for much of the cab hardware.
Very cool. I never understand why you don't have more subscribers. Thanks for sharing.
The reason you don't have air tires in the rear is the massive counterweight, you would wear out the air tires' immediately they have to be solid tires
I could see that being true, but I've seen plenty of machines with air tires back there. That's what made me curious about changing them!
@@SalvageWorkshop My H70C Hyster has rear air tires and dual air front tires.
Totally incorrect - The standard tyres were pneumatic. Minimum 80 PSI. Solid tyres were used in locations were punctures were prevalent. For work in containers and the like air tyres were preferred as they didn't pound the steel floors as much. The H60C thru H90C was the mainstay product for Hyster lift truck range for many many years and the envy of many other brands.
@@SalvageWorkshop It all depend on the application you use the Pneumatic or solid tires for. Around a workshop helping with lifting etc, Pneumatic tires. If for yard work ie loading/unloading trucks etc coming in and out, Solid tires.
Well here is wishing you good luck with all that you do & thank you for making these videos & sharing your knowledge with us !
Matt that "Specialty Screw Driver" was for "clutch head screws" GM used them for Rear fender screws on trucks years ago. I have them on my 1948 Chevy.
Learned it was a clutch driver in high school,forty some years ago.
Never saw where it got used since then.
The 1963 mobile home I demo'ed was built entirely with "clutch head" screws, Couldn't toss them into the trash fast enough.
@@steveaw5895 right you are!! They also used them for the horn ring on old GM steering wheels.
They are SO obsolete. I had an old Craftsman one that I wanted replaced under warranty. The guy in the store said just take another one.
Tremendous I would not have believed you would get this one going. Cheers John from County Durham, England.
This is amazing 👏, i cant believe how good its running, ive always wondered if a locked up engine with rust cylinders could be revived with a hone job without removing the pistons. Good job man! You did what many have thought about doing but never dared to actually do it to see if it'll work. Mad props!
Excellent, clean it up then paint it. Dual wheels on front also, air tires on rear would be a great asset on your property. Good luck ! You are doing a great job. All the best.
Big yellows fine but I think someone must have seen your pat pending idea and gone back in time and invented it 20 years ago 😁
A lesson on points to that extent is appreciated.
Best part is tomorrow he will need that screwdriver. Because thats just how it works 😂😂.
ain't that the truth! You can have a tool in the box for years but the moment you modify it or pass it on to someone else, almost guaranteed within the week you'll find yourself needing it to progress a job that just can't be done without it. Way of the world, always has been always will. (Also applies to unused parts/junk you kept "just in case" it comes in useful one day. That day is generally 7 or less days from the moment you had a clear out and made space for other useful stuff.)
Put your forks down when parking
Wow! Great job 👏
Looking forward to more of your videos
The "C5" in the serial number is known as the unit code, the "D" is the factory code which in this case is Danville. The last letter "N" is the year of manufacture which is most likely 1969 as the last production year for that code was 2015 and the one before that was 1992..
What he said
So it was made in danville . Va? In 1969?
@@flir67man84 My Hyster Spec Book says Danville IL, which i think is Illinois (I'm British), a quick google search confirms Hyster dos have a factory there....
@@woods457 Spot on. Hyster HQ was in Portland Oregon, Danville was their big plant but they also built their compaction equipment in Peoria.
it seemed hopeless at first but again persistence really does pay !! well done cheers
If you want to give it a name call it Clark
You need to borrow Jonathan’s crane to fix the lift boom leak seal
Nice gas tank setup. I built 1 of those myself in a 5 gallon bucket. Mounted an in tank electric fuel pump from a car with 2 long leads & alligator clips. Teed off the fuel line with a gauge, valve & return hose to the bucket so I could regulate the pressure from zero to close to 100 PSI. Worked great for moving stuff with bad fuel pumps up onto my lift.
Michelle says you should name it “forked up”
Lol... i love that... that's definetly up there in the running!
Your videos are very thorough & I look forward to them. After nearly 50 yrs as a pro & now amateur (went into electronics somewhere..) this kind of stuff is now my fun! I just gave up on the Zenith carb on my '72 Case 30+4 and fabbed (you can see my amateur in it..) a manifold and bought a$50 EBay VW 34 pict and installed same.. Electric choke & shutoff... Fired on the 1ST key and runs better than ever!!
You will get more consistent and accurate readings if you run your compression test with all plugs removed.
Did not think you were going to fix that many people would have given up on that forklift great skill & patience don't understand the thumbs down.
Regards
Steve UK London
Here's something of interest: "The name "Hyster" was allegedly derived from a term commonly used by logging workers in the Pacific Northwest at the end of the 19th century. When a load of lumber was ready to be transported, a logger would yell "hoist 'er". According to the Hyster Company web page, this term became synonymous with Hyster trucks." (Google, of course!)
Call it, "OLD YELLA"... Keep up with the good work and determination... 10/10
I like the way you explain what and why you are doing. I just learned how to efficiently find the firing order. THX.
Paint it like the Scooby Doo van and call it the “Hystery Machine”
Dogs were excited to hear it coming, they knew who was bringing another one home!
You could just call it "Yellow Lift Machine"... There's a whole parody of "Yellow Submarine" waiting to be born right there...
I run a Hyster 90 at work. It's new, but you can see the influence on the new machine from the old one. They are the proverbial "brick shiznithouse". We run them just about 24 7 with few problems. Engine is a Kubota 4 cyl that displaces around 4 liters! The older ones have a 4.3 Chevy V6, all on LPG. Congratulations on getting the old bird home. Runs impressively considering the condition you found it in.
Hydraulic fluid always wants to escape! Great job on another resurrection. People would rather throw things away than cleaning or repair them.
You already called it . The old beast.
He's got the Midis touch - Everything he touches turns to Yellowish Rusty ... err - GOLD! Well done. Very interesting.
it's very satisfying seeing what you are able to do with these old machines. thank you for the video!
Matt, in part 1 there must be a tool for this You had it in you're hand lol love this channel you are one hard working young man,as you said earlier if you don't ask you don't learn, that's it in a nutshell regards from Scotland 🇬🇧🏴👍🛠️
I LUV this kinda stuff!!! Its a win-win... like u said,.. u sa ed it from the s rap yard,.. and u did great quality work (u should b proud of urself) , and u now have a VERY USEFUL TOOL/MACHINE! Please keep us posted with new videos of this. And maybe a new paint job in the near future? TSC has great single stage equipment paint,.. what a difference it would make on appearance.. good luck my friend
Congratulation Myster, I love the way you tell small details that help making sense to the bigger picture.I really start to understand motor and mecanic thanks to you. Merci
Excellent work and thanks for sharing this with us take care
Congrats! Great project. Looking forward to watching. Ron
Really enjoyed watching you diagnose and get just the engine going - the rest was pure gravy!!