You can actually slip that 11/32” & 3/8” socket on the bottom, right inside the 3/4” one that way you have all of them. It still fits inside my 20-1 adjust screwdriver and my impact, and the 11/32” keeps everything else on snug so they don’t fall off.
Nice video! Yeah, I love that new 11 in 1 it’s got to be one of the best hand tools I’ve ever owned. It’s probably my most used tool as well. The crazy thing is they actually missed two other tools to make it a 13 in 1, you can use the outer portion of the bit holders as a large hex head (Allen keys) for closing down suction line service valves etc.
I'm going to try the 9 1in 1. I do property mgmt and perform a wide variety of tasks. The Klein 14 in 1 bit holder handle with the 7 in 1 flip socket is my goto tool. Funny Ending to your Video! Looks like you added a 1/4" hex to a Christmas Tree! Thanks for making this video!
It’s a bit longer (obviously) but it’s great to have the extra sockets and all in one tool, especially combined with a bit handle! Thanks for watching glad you enjoyed it 😂
How deep are the bigger flip sockets like the 3/4" ? Can you fit like a whole 3/4" nut or bolt head in there? Or is it like a nut driver n shallow n only goes down like halfway over the bolt or nut?
Aye on the topic of metric flip sockets,, I got this set a year ago and while they don't all fit on one shift all at once for storage, I found a really nice set of 1/4"dr impact flip sockets that have 1/4-1/2 And 8mm-15mm no skips.. N the whole sets only like 30 bucks I'll post a link to it inna sec
I bought the klein 6 in 1 extended reach screwdriver. I had it a whole 2 weeks before the slotted screw driver tip snapped off while landing a wire on a breaker. I barely tightened and snap. I have had some issues with some of their other tools. I prefer knipex. I do like klein but i think their quality isnt what they used to be.
That’s wild! Did you warranty it? I had to walk into Home Depot and grab the new one and be good, though I only did it once. But I have had one bit over my career snap and it was my shrader tool. Love knipex, I think kleins best lane for drivers is dedicated drivers for sure.
Waiting for my local Lowes to get the 9-1. Did get the 1/4” pass through ratchet set and has already come in clutch. Love me some Klien! Great video Jake the 🐍.
LMAO You bent the crap outta that shaft! Now you know why you shouldn't keep all the sockets on the shaft when using with an impact. As a motorcycle rider, I love these sets. A lot of sockets in a compact package. Save room in the saddlebag.
I wish I didn't buy the bigger half inch flip socket set now w that new 9 in 1 flip socket set lol .. I would much rather have this set over the other one. It would get alot more usage. And save me alot of space in the tool box by replacing sockets I rarely use
Just go straight for it, be authentic try not to be to “robotic” unless that you 😂 and just give your perspective on the tool and your use and feel for it.m. Also being in the trades and not just a tool tuber but in the field will help because of real world scenarios.
This I heard from the horses mouth (a Klein representative) that all Klein tools (every single tool) will be made in house (like made in the USA man) I own Klein tools and they are good stuff.
Funny. But, I do like Klein, and have a few of their flip-sockets in various bags. I think I got my first Klein thanks to Ted Cook, my first flip-socket thanks to Curtis, and the others were funded with funds pried out of my wallet by @Morgans Maintenance.
If they would fix the rubber on their handles, so they stop spinning freely and shrink them down a little bit it would be money They need to keep up with the German competitors
I don’t think they’ll be ever to keep up with the Germans, that’s top notch for sure, I’d love to see it tho!! I haven’t had the issue with the handles yet, but have heard it from others.
@@KoolinwithKrauss I got the 20 in one flip socket it’s pretty bulky but the bit storage is nice . I hope they start selling the flip socket’s individually cause I don’t need anymore handles or the shafts either .
@@KoolinwithKrauss I’ve got a short one a medium one and the long ones they come with plus 2 of the original flip sockets and the 20 in 1 would like the new socket size but I’ve got it in other bits so ehh it is what it is . Haha
That stubby is my go-to for service work. I love it
Thing is definitely sweet, especially in the tight spots
You can actually slip that 11/32” & 3/8” socket on the bottom, right inside the 3/4” one that way you have all of them. It still fits inside my 20-1 adjust screwdriver and my impact, and the 11/32” keeps everything else on snug so they don’t fall off.
That’s slick!!! Didn’t think of that, I’ll will have to give that a shot! Thanks for the tip 🫡
Definitely not gimmicky i love these. I have the deep flip sockets and i love those as well
Huge fan to, to convenient not to have!
Nice video! Yeah, I love that new 11 in 1 it’s got to be one of the best hand tools I’ve ever owned. It’s probably my most used tool as well. The crazy thing is they actually missed two other tools to make it a 13 in 1, you can use the outer portion of the bit holders as a large hex head (Allen keys) for closing down suction line service valves etc.
Dangggg really?! That’s pretty slick!! Good find man, it really is a great little tool
I use mine everyday ! Makes a blower swap so much quicker !
Facts brother!! So much quicker
Kline dropped the ball with the stubby not being able to hold standard 1 inch bits in the handle.
Solid point!!
The 7 in 1 has saved me a lot of walking and climbing.
Definitely!! Same here dude 👍
I’ve made a substantial tool Christmas list watching these lately ! Still running 7 calls a day baby … will be buying this Friday
It’s that time of year for sure!! Your crushing it my man 🫡
Excellent vid Jake ... I have most of their flip sockets & they are awesome tools ... Glad no one was hurt at the end Thx Sir
I love the flip sockets their game changers. But ya that was close 🤦♂️ 😂
That was a close one, Don’t hurt the money maker 😎💪👊
Man had me sweating 🤣 😅
They need to start selling individual flip sockets
I’m hoping that’s the direction they go and just build it as you need it
@@KoolinwithKrauss yea because it doesnt make sense to keep buying sets only for a extra socket
I recommend the Klein flip jaw pliers. Worth the money
I believe so as well!!
I'm going to try the 9 1in 1. I do property mgmt and perform a wide variety of tasks. The Klein 14 in 1 bit holder handle with the 7 in 1 flip socket is my goto tool. Funny Ending to your Video! Looks like you added a 1/4" hex to a Christmas Tree! Thanks for making this video!
It’s a bit longer (obviously) but it’s great to have the extra sockets and all in one tool, especially combined with a bit handle! Thanks for watching glad you enjoyed it 😂
@@KoolinwithKrauss Choose the stubby to keep the length down😂
Awesome!! Can’t go wrong with any of them, all depends on what works best for you, appreciate the feedback! Glad you enjoyed it
How deep are the bigger flip sockets like the 3/4" ? Can you fit like a whole 3/4" nut or bolt head in there? Or is it like a nut driver n shallow n only goes down like halfway over the bolt or nut?
I haven’t had an issue with it fitting the whole head, especially on the bigger ones bc they are deeper.
Sounds like you know all about short stubby shafts 😂😂😂 had to brother YEEEYEEE
The muscle memory was ridiculous 🤣
@@KoolinwithKrauss 🤣 🤣
All good stuff! I use them daily.
Absolutely!! That’s the truth 🫡
Aye on the topic of metric flip sockets,, I got this set a year ago and while they don't all fit on one shift all at once for storage, I found a really nice set of 1/4"dr impact flip sockets that have 1/4-1/2 And 8mm-15mm no skips..
N the whole sets only like 30 bucks I'll post a link to it inna sec
Oh dang!! That’s wild, definitely with the link I’d like to take a look
I bought the klein 6 in 1 extended reach screwdriver. I had it a whole 2 weeks before the slotted screw driver tip snapped off while landing a wire on a breaker. I barely tightened and snap. I have had some issues with some of their other tools. I prefer knipex. I do like klein but i think their quality isnt what they used to be.
That’s wild! Did you warranty it? I had to walk into Home Depot and grab the new one and be good, though I only did it once. But I have had one bit over my career snap and it was my shrader tool. Love knipex, I think kleins best lane for drivers is dedicated drivers for sure.
Personally I hate the 11/32 socket.. wast of space on the tool. Glad they came out with them. Just need metric now.
Keeping our fingers crossed on those metric sets!! Would be fantastic
Can you fit the 3/8-7/16 and 1/2-9/16 socket onto the small stubby shaft?
Let me check, and I’ll get back to ya!!
@@KoolinwithKrauss awesome thank you!
Waiting for my local Lowes to get the 9-1. Did get the 1/4” pass through ratchet set and has already come in clutch. Love me some Klien! Great video Jake the 🐍.
Right? Same here!! Went the other day they had the 3/8 but wouldn’t sell it says it was being recalled 🤷♂️
@@KoolinwithKrauss that’s what Adrian said on Tuesday.
Jake, they ran a Bauer commercial right before this video. At least it's red and black! 😂
Oh no we will need to have a sit down about those commercials 🤣
QVC will hire you thanks for the video
That the end goal 🙏🏻 😂
Good lord…. That baby had some zing in it at the end. 😂
Dude right ? 🤣 my dumb ass 🤦♂️
The 19-in-1 definitely has potential. LMAO!
🤣 keep your eyes opened… at your local Lowe’s 😂
LMAO
You bent the crap outta that shaft!
Now you know why you shouldn't keep all the sockets on the shaft when using with an impact.
As a motorcycle rider, I love these sets. A lot of sockets in a compact package. Save room in the saddlebag.
You’d think they’d using a stronger material 🤣 🤦♂️ these things are definitely great and a space saver!!
Don’t sleep on the 19-1 guys that’s the future, plus it helps you find your way back if you ever get lost since it’ll be dragging from your holster 😂
🤣 I think that would make it a 20-1, something they didn’t even know about 😂 a wayfinder haha
Funny because they just came out with the 20-1.. to bad I made that months ago😂
I love all these. Plus Klein brand makes em a no brainer. Just gotta figure out which applies
To me the most before
Walking into a home.
Exactly!! Have a dedicated tool for the job to lighten the load 💪
You got the SHAFT.
🤣 a case of em 😳 lol
I wish I didn't buy the bigger half inch flip socket set now w that new 9 in 1 flip socket set lol .. I would much rather have this set over the other one. It would get alot more usage. And save me alot of space in the tool box by replacing sockets I rarely use
I was wondering why our car had a huge dent on the door 🤣🤣 🤣 was it you or the kids?!?! lolol
Was not me was one of the kids 🤷♂️ or the Publix parking lot 😂
waiting for my stores to get the metric i've been wanting one to keep on my motorcycles.
Dude I saw that I’m waiting myself!!
Thinking about starting a channel electrical real-time tool reviews...Any tips?
Just go straight for it, be authentic try not to be to “robotic” unless that you 😂 and just give your perspective on the tool and your use and feel for it.m. Also being in the trades and not just a tool tuber but in the field will help because of real world scenarios.
@KoolinwithKrauss thanks bro. Definitely appreciate it. 🫡
This I heard from the horses mouth (a Klein representative) that all Klein tools (every single tool) will be made in house (like made in the USA man) I own Klein tools and they are good stuff.
Now that would be friggin fantastic!! Love Klein!!
I need that 19 in 1 🤣
Gotta get this in production!!
Funny. But, I do like Klein, and have a few of their flip-sockets in various bags. I think I got my first Klein thanks to Ted Cook, my first flip-socket thanks to Curtis, and the others were funded with funds pried out of my wallet by @Morgans Maintenance.
Been Klein guy once I could start to acquire the better tools! Growing up that’s what was in my dad’s tool bag and I always just loved them for that.
I do hot side and cold , would work go for me
Right on!! Would definitely help out!
They can be handy, but I’m starting to feel like I spend too much time flipping bits around to get the right size depending on the equipment.
True, if I’ll be using multiple sizes I end up just taking them all off and putting them in a pile and grabbing what’s needed that way
N I can see how these can be called gimmicky but yeah I use my flip sockets just about every day. Or at least any time I grab my tool bag lol
Yeah some folks aren’t a fan but I still use the first one I ever got, with all the variations it’s key
No more Lowe’s in Canada, not that they carried it anyways
Oh wow! Is Klein available other stores? Or online only
If they would fix the rubber on their handles, so they stop spinning freely and shrink them down a little bit it would be money
They need to keep up with the German competitors
I don’t think they’ll be ever to keep up with the Germans, that’s top notch for sure, I’d love to see it tho!! I haven’t had the issue with the handles yet, but have heard it from others.
19 and I 😅
Done 🤣
Helo bro
What’s up dude
Metric please
Right?!? Hopefully
Hahahaha
😅 🤣 🤦♂️
@@KoolinwithKrauss I got the 20 in one flip socket it’s pretty bulky but the bit storage is nice . I hope they start selling the flip socket’s individually cause I don’t need anymore handles or the shafts either .
@@sykotictendencies6032 ya if your loaded with the 20-1 your good and the shafts are at a premium at this point you should be good 👍 😂
@@KoolinwithKrauss I’ve got a short one a medium one and the long ones they come with plus 2 of the original flip sockets and the 20 in 1 would like the new socket size but I’ve got it in other bits so ehh it is what it is . Haha