How to Build Beautiful Wood Door
Вставка
- Опубліковано 21 лис 2024
- #handmade #woodwork #woodworking #doormaking
How to make a door that will last a lifetime.
Woodworking Door made from oak wood.
MY STORE
www.etsy.com/s...
TRGOVINA
magnetnastojal...
BE UP TO DATE AND FOLLOW
www.instagram....
WANNA BUY A AWESOME LASER FOR YOUR PROJECTS?
Click here ( affiliate )
www.xtool.com/...
Welcome back, in this video, I'm showing how to make a door from solid wood with basic tools and standard dimensions for hardware.
Before you say having a panel saw or a drum sander isn't a basic tool let me say.
I made the same design door made of beech wood with 3 electric tools
A handheld router and a jig
Small green bosch table saw
and small orbital sander.
It did take some more preparations and time but trust me when I say you can make a door that will last a lifetime with just those 3 tools.
These doors are made from solid oak wood. jointed with floating tenon joinery. It is made of styles and rails type of construction with 3 panels in the middle.
I went with a traditional and simple design to fit the door for the place where they are installed now. It is like a wine cellar with a rustic feel made from the wooden ceiling that I made before I made the door and the stones on the wall.
I use AGB hinges which are very good and easy to use. I use PU wood glue which is very good for this type of joinery because it expands and can fill up all loose joints.
For a finish, I went with water-based acrylic varnish which is simple to apply, it dries very quickly without any odor. To save some money on the lumber I made jambs from segmented pieces which were glued into C form.
it took me around 4 days to complete everything.
I have many new videos in the making, some with my vivid imagination and unique design and some more traditional woodwork similar to this door where I'll show tips and tricks which you can use in your shop. Besides that, I have a new video review ready this time from ATOMSTACK a diode laser that you don't want to miss. A powerful laser that can be used for almost anything. The video coming up shortly.
Thank you for stopping by, and I appreciate all of your support. If you have any questionsfeel free to comment or reach out.
Take care!
LIke the quality of the build but your definition of basic tools differs from mine 😂
came here to say exactly this lol
Exceedingly well executed & outstanding result. Very well done. Kind regards.
Thank you buddy 🙌
Thank you for sharing this true handcraft and even bringing all the dimensioning in the video 👍🏼🙏🏻👌🏼👍🏽🙏🏽👌🏽
Much appreciated buddy
Outstanding build!!
Exceptionally craftsmanship!
Thank you buddy
That big door will last a century👍🏻👍🏻
At least 😉
Well done! 😊
When you were putting it on the hinges I was like, 'that must weigh a tonne'.
You were right 😂
Thank you mate
Very nice door built to last a long time thanks for sharing
Thank you
Great building - and great video editing and angles. Amazing video!
Thank you
Great design and build by a real pro.
Thank you for your kind words. Cheers
Vrata su odlična,za konjušnicu prva liga.
Samo konj bi to znao 😉
Very basic tools, thank you
Indead
As always, beautiful and neat work. Watched with pleasure. Definitely like.😊👌
I appreciate your feedback. Cheers mate
nice, made for the ages
Thank you
Thank you for the dimension of the door! What is the thickness of the panels?
Make what works for you.
From 10 mm to 20mm
Vrata izgledaju odlično! Gdje si nabavio šarke AGB i ovaj jig koji koristiš u videu?
Hvala
Hvala kolega.
Svaka bolji stolarski "shop" v SLO ima nesto slično. Može se dobiti i na intranetu / AGB hinge jig
Great job!!
Thank you
Adding a track saw into the mix of jobsite TS, router, and ROS, and it's even easier for a DIY'er to pull this off. But any DIY'er going for a full door probably has a planer which will help with the panels.
Unrelated to this video, but I see you make some awesome knifeholders from your etsy! I'd love to try making one of those! Where do you source your steel legs for those?
Nice job 👍! Did you buy the tenons in a shop or you did u do for yourself? There is some silicon plastic to do the doors more quiet. With What device you make the hole for them?
Tenons are shop made. Just board thru thicknesser 18mm thick.
For plastic/gasket i use 3mm slot cuter router bit. Or in some cases i buy with adhesive tape on.
very nice
Thank you
How do those hinges stay in the door? I have never seen those before and didn’t understand.
They havs long screws /one screw one prong
Hi! Thanks for lovely video.
What school do you recommend in Slovenia for woodworking education?
Great door and editing, pleasure to watch. Was this for self or for a customer?
I appreciate that Michael thank you.
Door are for a close by neighbour/ friend.
Made in old design /to go with rustic room that he has.
Cheers
@@Slovenianwoodworker Respect, my friend for your courtesy and craftsmanship.
What Is the dimension of the loose tenon?
What router bit do you use to make the lock seat?
Straight cut 18wide
Zajeban lik, skroz :)
Absolutno 😉
What type of wood did you use for this door?
is there an email to reach you.. i have need for few doors for a project
Do you have links or name/pwrt number of the hinges?
Not really.
But Google door hinges AGB there are only fev kinds/different in size that's all
Nice door but wouldn’t say you built it with basic tool it looked like professional tools to me
Table saw, router with tennonig jig and sander. That's all you need. To be able to make this exact door. Cheers
@Slovenianwoodworker but that's not what you used, you used a lot more than that and definitely professional tools. Yes we could do it with those tools but if you are going to put basic tools in the title use basic tools. Beginners are not going to be able to extrapolate that level of knowledge and skill. Still a beautiful and well done door though.
Justtool 😀
Very
What happend to that video where you build traditional table and bench?
First ever who mentioned that old video :) I set it up to private I received some restrictions due to audio or something.
@Slovenianwoodworker I need to build 3 tables like that now I thought I'd copy them.... 😅
I have pictures on IG and short clips too I think
Basic tools 😅
with basic Tools???? You have a whole machine shop.
Relax man
Yeah, but i have not a carpentry..
Extremely misleading tittle. Those are far from basic tools.
Have job vacancies fanichar carpentar job Slovenia
Buy a workshop and tools first i guesss...
No at all
Everything comes on its own