I bought the Spartan ar500 armor kit for 200 bucks. came with front, rear, and side plates, and plate carrier. like you said, never know when your gonna need it. took me back to my basic training days of wearing it all day lol.
@@pewpewkachew4735 i cut a gym mat into the shape of the plate and put it in front of the plate and its really tight against it so that should stop the spall
Hey brother, another class video, but speaking from 20+ years in law enforcement you still have to worry about the real threat of wearing that armor, be it soft or plate and once you take a careful look at it you will see the most vulnerable place is your brachial plexus area in the front of the set up and the armpit region. Most officers killed are do to the round being fired at you strikes you in the unprotected armpit area and passes right through your armpit and your heart and if it hits you on the front side and into the brachial plexus region you are going to face immediate paralysis in that arm. stay safe and watch your six brother.
the military started using floppy pads to hang over armors shoulders to protect the side heart shot. the new armor straps onto your upper and lower bicep covering even more. kinda like slipping on a elbow pad but higher. body armor saves lives but its also a false sense of security.
Guy Green It’s a gamble any way you look at it. You could get shot in the nuts. You need the nut guard. You could get shot in face. Need the face guard. You could get shot in the kneecap. Need the knee guard. Just invest in a tank and cover your 6. Damn, should have bought the tank guard.😬
Oh yes and I seen the comment about the 3A inserts, definitely if you got the money you’re going to want that because as I mentioned before the fragments will turn into shrapnel and there’s 3A inserts. Knives and all kinds of stuff. A lot of people don’t get them because they can’t afford them so if you have the capability it’s highly recommended but if you’re getting steel armor trauma pads are essential
@The Good Life the extra coating is to cut down on sprawling (when bullet hit steel they fragment and fly around) the extra coating catches those fragments. Trama pads mitigate some of the shock from the bullet suddenly stopping and ringing the metal plate
I couldn't afford the Level 3A soft inserts. I did get my Level 3 steel plates from TS with the spall coating and trauma pads. That's all I could afford. I had a couple of old Level 2 Kevlar soft panels laying around and they fit perfect between the steel plates and trauma pads, so for a stand alone setup it's better than just the steel plates at least.
They should be giving these away, it shouldn't cost anything to save a life if you are in a job that requires you to put yourself into a position where this is needed. Poor kids should have shelter and free food too. Dental work should be free as well. Money is God though so if you don't have it you die.
Regular old Winchester 5.56 55gr FMJ out of a 16" or longer barrel will punch holes in level 3 steel armor. I put 1/2" lexan behind my level 3 plate to see what was coming out the back. The bullet splatter was contained on the face of the lexan, but the punched out steel slugs from the plate were driven halfway through the lexan. The barrel on my AR is 16". I'd say in this situation, having a level 2 or 3a soft panel behind the steel armor would most likely catch those slugs. However, I saw a test of M193 shot out of a 22" barrel penetrate a level 3 steel plate and the 3a soft panel placed behind it. It then penetrated several inches into ballistics gel. The guy then shot M193 out of a 22" barrel and it penetrated a level 3+ steel plate. Bullet velocity was 3267fps.
I have a Tac scorpion set up. Only front and back. I wanted sides but eventually opted out. You can purchase trauma pads for the rear of your plates. Adds just a bit more comfort and warmth in cold weather. I often wear mine just to always be reminded of the weight and what to expect when wearing it. During cold months where it lays on my body usually has sweat marks on the shirt. I got all inclusive for $169 and change. I had a coupon that dropped it another 20 dollars so it was a steal but would have paid $169 as well. It is 11x14. Had a 10x12 which I sold because it was a wee to short. Great vid.
Nice video, finally got to see someone as big as me make a video on body armor. Everyone so far is skinny and the armor fits them nice and tight especially the concealed carry vest. Dude its not a muffin top it's called the 300th parallel ✊✊✊😎😎😎😂😂😂
I have a similar carrier but with the 2 front and rear velcro strips instead of the 3 on yours along with Spartan Armour discontinued Semi Flexible ECP front and rear plates.
The molle section on the very front lifts up, so you can adjust, and attach the side buckles, and adjust the cumberbund. Also you can tape the excess inner side straps down to themselves, so that they dont hang down.
I picked up the mopc gen 2 from condor ( first carrier) condor states it can fit med to large swimmer plates, no mention about shooters cut. I was hopeing to run AR600 plates i assume i should be gtg then
Great video brother! A good place to buy very well priced armor is Body Armor Mega Store. They have some of the best prices online. I just ordered two sets right after Christmas. Be safe brother and keep your powder dry.
Hell yeah thats what i just bought best deal out there and free shipping !! The package definitely isnt light . I think mine weighs somewhere around 28 pounds
Hey brother, don't listen to these wannabes, I literally started chemotherapy on the 13th of this month for stage 3 andocarcinoma non small cell lung cancer, not fun, they took a third of my right lung and I am going to survive this just because I will not let the enemy win. stay strong brother.
@edcrobert T assuming your talking soft armor and not trama pad or prob would but it would be cheaper to just buy new steel armor with build up coat rather that using expensive soft armor for spawling
@edcrobert T sell steel plate put a few $ wit it and get some with build up coat. I dont know how stacking would work dont wanna tell u wrong at the cost of your life
travisp11...great video im built just like you except im 6 foot 2...i do armed security. This is my first time getting body armor but thanks for the walk through and even wearing it for us somewhat big people lol
Glad to help! Years after I made this video to be honest with you I would rather spend a little bit more and get a good set of ceramic place that we now see or some of the new polymer plates that are out there to save weight
i was looking at AR500 body armor but have found out after a little research that body armor for an everyday civilian it is actually illegal to own any form of it in Australia
That is just downright wrong. In an event of war, civil unrest (which has happened here from time to time) or just personal protection this armor would be cumbersome and heavy, but also the difference between life and death. I only have it around for a worst case scenario.
Get the composite plates at the steel plates are too heavy are use it for my level III and level four and PI work The strikeforce composite plates are pretty light and will fit There ar 500 composite plates with it as well
I’ve just got your exact same setup in the beginning of this 2020 year the tactical scorpion plates w condor vest. I’m 6ft and weight 265 I’m ok with it doesn’t seem flimsy at all. I’ll add trauma pads later but maybe that will tighten it up a little more than I would like, we will see.
I caught you discussing this purchase on Jona... I mean NightStryke's channel a week ago or so and you gave me the armor bug! Hope some other channels try it out and give their feedback. It seems simple, carrying armor, but I bet there some tricks we can learn
Nate2099 Oh! My bad! I should have a range video up for the Beretta 92 either this evening or tomorrow morning. I'm posting them early on Patreon so my supporters can have the first look!
The ar550 is so awesome. But so heavy and so pricey... but i want a throat and jaw and head armor also. The armor protects ur chest belly, but not from the spreading pieces that spread when the pellet explodes on impact.
I know this is old but would you recommend this for a security Guard? Thinking about getting this since I’m a SG in a mall where robbery and gun violence is at a all time high
DJ Money D It is bulky and hard to conceal. You will get a good work out if you wear it but I would recommend you look into something tailored towards your line of duty. My set up is relatively inexpensive and functional but from what I have heard from combat service men and women wearing those carriers for multiple tours has done damage to their shoulders and backs. It works but just keep those factors in mind.
That’s a maker (can’t remember exactly) who sells a shirt style vest that’s made to hold Kevlar panels I wear it daily Extremely easy to wear and extremely concealed It’s 40 dollars for the shirt and I got 2 10x12 28 layer Kevlar shooter cut panels for 60 ea shipped Definitely recommend it
I was going to say look around there is soft vest that about do the same as this one and alot lighter for your line of work. I've seen som Leo's wear soft armor but it's all up to you on how much extra weight you want to carry
Wear a plate carrier with level 4 plates. Have a big ass patch that says security on your plate carrier and helmet. Wear a ballistic helmet. Carry a rifle with a sidearm strapped to your waste. Wear some elbow and knee pads. Dress in black or green. Have 3 rifle mags on your plate carrier. Also put on a pair of ballistic goggles. Have a group of you dressed up like that looking operator as fuck. That should deter most criminals from robbing the place. There’s a reason nobody shoots up a gun shop or a police station. Don’t forget about training.
@Frankie TEE malls have jewelry stores with diamonds and watches that cost upwards of 10 grand, and also malls are a target for an active shooter, and malls get a lot of transients. it's not unreasonable to have a need for body armor if you're doing security at a mall. look at mall of america's security, they have a special operations division and k9 units
nice. I just got this body armor. Unfortunately i have to wear it all day for my work. I wanted better protection because it's getting dangerous out there. Hope i can handle the extra weight. My shoes won't i bet. have to change out the insoles more often probably. I'm 6'2 256 pounds. I hope the 10x12 spartan level 3 plates is good enough. Got a good deal on it on ebay. I should have done more research first and i would have purchased a 11X14 plate instead. I wasn't sure about the side plates so i got soft 6x6 side armor instead. I'll upgrade it to plates next year. Note: i purchased 10X12 trama pads. I read that it helps with blunt force impact so your body won't get so damaged after taking a round on the plates. Kinda like a cushion pad between you and the plates.
Wasn't sure about the one size fits all bit you are about my size to decided to purchase the plate carrier and same plates in the meantime while I save to buy something a li L bit more practical. Thank you !
travisp11 need to point out, nothing's wrong with the scorpion armor. I just prefer the design on CATI. I use scorpion trauma pads because they're cheap. Not structurally cheap but money wise. They're foam pads and shouldn't cost over $20 a pair. Put the plates and pads in a condor carrier and it's one of the best cheap pieces of armor available.
I think the concerns over cheap gear are a little silly for certain things. A plate carrier isn't exactly a complex piece of technology. It's a piece of fabric that holds plates. We aren't talking about fighter jets where the difference between a cheap fighter jet and an expensive fighter jet makes a huge difference.
BCrafty121 True but on the other end if you get a junk carrier and wish to train with it you also don’t want something that won’t survive a few sessions.
I love my Condor plate carrier. This is just for civilian use only and I’m not planning to live with it 24/7. It’s more than good enough for me. I don’t mind paying for a body armor like John Wick is using. Never-the less it’s good enough for what I can afford.
travisp11 really its so heavy are you sure u can carry all that weight strap in your body ..specially when it comes to a combat situation where mobility is the key to success when ur carrying that heavyweight vest its a disadvantage and can slow u down
Travis I have the same set up, but with it the side plates. I know I should use them and its wrong of me not 2 but I'm 6'1 and about 280lbs so that means it's extra weight on me now I have lost weight from 300lbs so when I loss about 20 more pounds I will consider using side plates then thanks for the video and stay safe 11/25/18
Mark Isler there may be some package deals out there where you get that plate carrier in a package deal. I bought the plate carrier on Amazon and the plates elsewhere. This video is a bit old but the prices on these plates have dropped if you look around a bit.
I know that vest I personally wore it and I have one still but, I would highly recommend you spend the extra money and get 3+ armor and no matter what kind of armor you go after ensure you get spall coating or else the bullet fragments will turn into shrapnel. Also steel plates are great because they have multi hit capability however speed or velocity will always defeat armor. One thing you’re missing is your trauma pads if you do not have the trauma pads which run about $20 for the set you are asking for broken ribs… I’ve been in the military for 20 years and I have taken a hit with armor on and believe me if you’re getting hit with 7.62 you’re gonna want it otherwise you will have them broken bones especially with steel plates and for the record I only carry tactical scorpion level 3+ and level four plates spall coated curved plates or AR500 3+ build up coated (very high quality). If you got the money and the time to wait for it I would recommend going with the AR 500 plates but tac scorpion is amazing and that’s what I was wearing when I got hit
THERE IS SOMETHING ALWAYS BETTER POINT BEING THIS IS GONNA SAVE YOUR LIFE IN MOST CITIES DEPENDS WEAR YOU ARE BUT WERE NOT IN A WAR ZONE... AND IDK WHAT HIS SAYS BUT THE ONE IDENTICAL TO HIS +3 WHICH IS WHAT I HAVE SO IM CONFUSED THERE AND THIS IS FOR IN THE CITY WHAT MORE DO YOU NEED FOR THE BUDGET I MEAN UNLESS YOU EXCEPT TO GO AT WAR WITH SOME ONE OR THINK THAT'S A POSSIBILITY WERE EVERY YOU LIVE IM BY CHICAGO SO IDK WERE YOUR FROM BUT I WEAR THIS GET A LOT COMPLIMENTS BUT MY PLATES ARE PLUS 3 IM COOL WITH IT BEING HEAVY IM A BODY BUILDER SO THAT NEVER BOTHER ME I GUESS THAT COMES TO EVERY ONE DIFFERENT CINE SOME ARE WEAKER THAN OTHERS AND THANK GOD IT COMES IN 3X IM WEAR 2X TOOK PICS YOU CAN SEE ON THERE WEB SITE THEY USED THEM..Rated for up to six hits from 7.62 Nato bullets (.308 Winchester) with velocities up to 2780 fps A stand alone armor plate with multiple hit capability - passed NIJ 0101.06 6 shot stand alone tests against 5.56 M855 M80 ball (greentip) at 2800fps and 5.56 M193 55 Grain FMJ at 2900fps. In house testing defeated 30-06 165 grain copper tip trophy. Listed on the Department of Justice NIJ certification website. Level 3+ plates are manufactured from a proprietary steel reaching Brinnell Hardness ratings in 600 - 630 Laser cut Simply Stronger, Thinner and lighter than the competition Our new proprietary steel core is far stronger than the AR500 - AR650 steel core. This core is hardened all the way through unlike the AR500 - AR650 which is only surfaced hardened. At only 0.197 inches thick nominal makes it 20% lighter than the AR500 and superior in strength. SEEMS VERY PROTECTIVE FOR THE PRICE AND IT WAS TRENDING ON EBAY AS THE BEST BUDGET ARMOR THEY WERE TRENDING 5 DAYS AGO ON EBAY AND AMAZON THE DAY I GOT IT THESE WERE TRENDING I GOT THE WELL CLOSE TO THE SAME ARMOR MINES PLUS BUT SAME CREATOR OF THE PLATES MADE IN AMERICA AND THEY ARE SO GREAT IS ALL I CAN SAY I WEAR MINE ALL DAY EVERY DAY AND NO ISSUES BUT I KNOW A LOT PEOPLE NEVER GOT TO LIFTING AT ALL SO BUT HEALTH IS IMPORTANT I MEAN WITH ALL THE GEAR THEY WEAR AND MILES I DON'T THINK SOME OF YOU COULD WALK YOUR NEIGHBOR HOOD I MEAN I COULD MAKE IT HALF A MILE I HAVE AND I DID NOT STOP CAUSE I WAS TIRED I WAS TOLD.. .. I KNOW YOU GOT YOU BETTER ARMOR SO NOW THIS ONE IS NOT AS GOOD BUT I BET YOU WAS JUST AS ENTHUSIASTIC WHEN YO7U GOT THIS ABOUT HOW IT WAS UNTIL YOU GOT BETTER USUALLY HOW IT IS THE HIGHEST IN A AMERICAN CITY YOU WOULD EVER NEED IS 4 BUT WHAT DO I KNOW // ANY KINDA ARMOR THAT STOPS AMMO EVEN UP TO ONE SHOT WHEN I HAVE THE 4 PLATE CARRIER AND CAN SAVE MY LIFE ANY AT ALL IS BETTER THAN NONE BUT WITH THESE SPECS FOR UNDER 200$ AND IDK WHY YOU WOULD NEED MORE THAN +3 CAUSE THAT'S WHAT MINE IS LABELED I MEAN MAYBE 4 IF YOU LIVE SOME WERE HORRIBLE BUT IM SURE THERE ARE MANY NAVY SEALS WITH THE HIGHEST ARMOR YOU CAN GET SURE THEY COULD JUST LET EVERY ONE KNOW HOW MUCH BETTER THERE MILITARY STUFF IS THAN US CIV'S UMM WAIT THEY WOULD NOT DO THAT THERE NOT SO EGOTISTIC ..
Spartan Armor Systems has Package deals at 15% off. I picked up a Plate Carrier for $169.00 - Includes Carrier, 2 - 10x12 Swimmers Cut Plates, 2- Side plates.....
Laser keeps the temp more stable? Bruh a laser cutter cuts by literally melting the steel. CNC is better for temperatures bc it carves the metal not melt. Anything with friction has heat.
I want level 5 body armor with the trauma pads. If you are in law enforcement or security I would recommend level 5 get the thickest steal plates and the best trauma gear. Sure it's heavy but it will save your ass if you get shot in the chest either by a 12 gauge slug or a high Calibur riffle or handgun
Logan Nguyen I do believe these plates feature the anti spall coating. It is textured, with a rubberized coating. You may need to check Tactical Scorpion's website for details.
@@xspectresxx3461 Depends on your size. Some teens have the same measurements of full size adults. My vest is adjustable to fit multiple sizes. Please be careful if you wish to wear this as part of your daily wardrobe. Unfortunately this type of item makes people think of combat, police, fighting, etc. so it may get a negative reaction from people out in public.
I know you could potentially get cheaper stuff, but as far as im aware those are airsoft, these are the cheapest plate carriers that are designed as plate carriers, and for what they are they are fantastic
steve williams I hear ya. On my channel I like to test out some of the least expensive gear out there but I agree with you that you are really compromising if you go with a cheaper build construction. You could get by but no guarantees if it came down to actual use.
![AR500 Armor [Review]: All Threat Levels + Armor Piercing Rounds!](http://i.ytimg.com/vi/Fd7LeSaldIE/mqdefault.jpg)
![AR500 Armor [Review]: All Threat Levels + Armor Piercing Rounds!](/img/tr.png)
Just found your video. Probably one of the best ones I've seen on the Condor MOPC and plate setup. Thanks man!
Raymond Lambert Thanks for watching!
I bought the Spartan ar500 armor kit for 200 bucks. came with front, rear, and side plates, and plate carrier. like you said, never know when your gonna need it. took me back to my basic training days of wearing it all day lol.
Sandure Krovet Good choice but man, that stuff is heavy!
travisp11 Yeah it is but after a while, for me at least, I get used to it.
Sandure Krovet I don't doubt that.
I make sure I do the heavy weightlifting and wear level 3 body armor everywhere.
I could stand to lift some weights.
Laughs in daily level 4
No amount of weightlifting will stop bullet splatter into your neck or face though.
@@pewpewkachew4735 i cut a gym mat into the shape of the plate and put it in front of the plate and its really tight against it so that should stop the spall
Level 4 is much heavier than level 3
A link on the plates would be cool
Hey brother, another class video, but speaking from 20+ years in law enforcement you still have to worry about the real threat of wearing that armor, be it soft or plate and once you take a careful look at it you will see the most vulnerable place is your brachial plexus area in the front of the set up and the armpit region. Most officers killed are do to the round being fired at you strikes you in the unprotected armpit area and passes right through your armpit and your heart and if it hits you on the front side and into the brachial plexus region you are going to face immediate paralysis in that arm. stay safe and watch your six brother.
Guy Green Thank you for the information and for watching!
the military started using floppy pads to hang over armors shoulders to protect the side heart shot. the new armor straps onto your upper and lower bicep covering even more. kinda like slipping on a elbow pad but higher. body armor saves lives but its also a false sense of security.
I bought the optional armpit plates.
Guy Green It’s a gamble any way you look at it. You could get shot in the nuts. You need the nut guard. You could get shot in face. Need the face guard. You could get shot in the kneecap. Need the knee guard. Just invest in a tank and cover your 6. Damn, should have bought the tank guard.😬
GlobalMagicNation go for juggernaut style
Oh yes and I seen the comment about the 3A inserts, definitely if you got the money you’re going to want that because as I mentioned before the fragments will turn into shrapnel and there’s 3A inserts. Knives and all kinds of stuff. A lot of people don’t get them because they can’t afford them so if you have the capability it’s highly recommended but if you’re getting steel armor trauma pads are essential
Solid info!!
@The Good Life the extra coating is to cut down on sprawling (when bullet hit steel they fragment and fly around) the extra coating catches those fragments. Trama pads mitigate some of the shock from the bullet suddenly stopping and ringing the metal plate
I couldn't afford the Level 3A soft inserts. I did get my Level 3 steel plates from TS with the spall coating and trauma pads. That's all I could afford. I had a couple of old Level 2 Kevlar soft panels laying around and they fit perfect between the steel plates and trauma pads, so for a stand alone setup it's better than just the steel plates at least.
They should be giving these away, it shouldn't cost anything to save a life if you are in a job that requires you to put yourself into a position where this is needed. Poor kids should have shelter and free food too. Dental work should be free as well. Money is God though so if you don't have it you die.
There's a velcro extension in the side plate pockets, take a look inside them.
Michael Duong I will do that! Thanks!
Regular old Winchester 5.56 55gr FMJ out of a 16" or longer barrel will punch holes in level 3 steel armor.
I put 1/2" lexan behind my level 3 plate to see what was coming out the back. The bullet splatter was contained on the face of the lexan, but the punched out steel slugs from the plate were driven halfway through the lexan. The barrel on my AR is 16". I'd say in this situation, having a level 2 or 3a soft panel behind the steel armor would most likely catch those slugs.
However, I saw a test of M193 shot out of a 22" barrel penetrate a level 3 steel plate and the 3a soft panel placed behind it. It then penetrated several inches into ballistics gel.
The guy then shot M193 out of a 22" barrel and it penetrated a level 3+ steel plate. Bullet velocity was 3267fps.
So what level do you need to stop that
@@timesque9790 4
This Plare Carrier also has space for 12x14 Kevlar soft armor giving it double protection, this brand also Condor and Rothco make the same carrier
@@cliffords2315 good suggestion!
I have a Tac scorpion set up. Only front and back. I wanted sides but eventually opted out. You can purchase trauma pads for the rear of your plates. Adds just a bit more comfort and warmth in cold weather. I often wear mine just to always be reminded of the weight and what to expect when wearing it. During cold months where it lays on my body usually has sweat marks on the shirt. I got all inclusive for $169 and change. I had a coupon that dropped it another 20 dollars so it was a steal but would have paid $169 as well. It is 11x14. Had a 10x12 which I sold because it was a wee to short. Great vid.
It is a solid set up for the money. Thanks for watching!
Nice video, finally got to see someone as big as me make a video on body armor. Everyone so far is skinny and the armor fits them nice and tight especially the concealed carry vest. Dude its not a muffin top it's called the 300th parallel ✊✊✊😎😎😎😂😂😂
Nice! Hey man...it a Tactical Muffin top!! Just kidding bro. Thanks for watching!
Queda él ombligo descubierto 🤦🏻♂️tiene q ser mas grande el cheleco
I have a similar carrier but with the 2 front and rear velcro strips instead of the 3 on yours along with Spartan Armour discontinued Semi Flexible ECP front and rear plates.
Nice!
The molle section on the very front lifts up, so you can adjust, and attach the side buckles, and adjust the cumberbund. Also you can tape the excess inner side straps down to themselves, so that they dont hang down.
Thank you for the info!
Alvino El Papa yo I’ve heard complaints about clips or plastic buckles
I picked up the mopc gen 2 from condor ( first carrier) condor states it can fit med to large swimmer plates, no mention about shooters cut. I was hopeing to run AR600 plates i assume i should be gtg then
I would think so.
You might try velcro extensions if it's tight anywhere on the side armor
Thank you for preparing and posting an honest review of this equipment. 👍
Absolutely! There are a few channels out there that did actual firing tests on this armor and it held up well
Great video brother! A good place to buy very well priced armor is Body Armor Mega Store. They have some of the best prices online. I just ordered two sets right after Christmas. Be safe brother and keep your powder dry.
Always man. You too!
FYI you can get the same setup on bonanza right not for 141 dllrs free shipping. Comes with all 4 plates and carrier
Yup. Prices have dropped.
Hell yeah.
Hell yeah thats what i just bought best deal out there and free shipping !! The package definitely isnt light . I think mine weighs somewhere around 28 pounds
Hey brother, don't listen to these wannabes, I literally started chemotherapy on the 13th of this month for stage 3 andocarcinoma non small cell lung cancer, not fun, they took a third of my right lung and I am going to survive this just because I will not let the enemy win. stay strong brother.
Guy Green You hang in there brother but after loosing family to cancer I want you to know that you will kick cancer in the butt! Be strong, man!
Stay strong sir we are all still praying!!!
Stay strong brother
Def would recommend a build up coat for sprawling issues
supakamario Yup!
@edcrobert T assuming your talking soft armor and not trama pad or prob would but it would be cheaper to just buy new steel armor with build up coat rather that using expensive soft armor for spawling
@edcrobert T sell steel plate put a few $ wit it and get some with build up coat. I dont know how stacking would work dont wanna tell u wrong at the cost of your life
edcrobert T if the soft plates are designed to prevent spalling you should be set. My plates already have the coating.
edcrobert T Gotcha. Well, I don’t think it would be a bad thing to use the soft plate until you can get the exact setup that you would like.
Also Tacticon Armament is a good veteran owned company that makes a decent budget vest.
get it now, they have some really serious bills coming up trying to outlaw armor.
yetisuncle I agree.
Thanks for the info bud.
@The Good Life federal. Nationwide ban is what they are shooting for
@@devonnedaniel7801 Yup!
I bought one today now looking for armor for vest
Check out Tactical Scorpion online. Look around at the prices and I think you will find a good deal.
: )Thank you for the video Brother. I hope you're ready for a what's coming.
Do not take what they're doling out...
Always ready.
@@travisp11 💞
@@travisp11 Survival food...
ua-cam.com/video/wzECT4rWS6c/v-deo.html
I just ordered this same setup on ebay ...thanks for the video
bezerkO glad to help!
how much did you pay? i think i may have found it on ebay for $180 with free shipping plus tax
I’ve heard complaints about the buckle clips
Mine are still holding up.
travisp11...great video im built just like you except im 6 foot 2...i do armed security. This is my first time getting body armor but thanks for the walk through and even wearing it for us somewhat big people lol
Glad to help! Years after I made this video to be honest with you I would rather spend a little bit more and get a good set of ceramic place that we now see or some of the new polymer plates that are out there to save weight
@@travisp11 I'm gonna definitely do that as well
I can see this video was made some time ago but it anwerd my question on the side plate installation !! 👍👍
Video just turned 2 years old back in April. I'm glad it helped!
I have thick steel and I can't barely wear my vest it kills my back and neck and shoulders
Chris Linder possibly try a larger vest if you can find one. Also, did you adjust your shoulder straps?
travisp11 i will check out other vests my frame is about the same as you a big guy
i was looking at AR500 body armor but have found out after a little research that body armor for an everyday civilian it is actually illegal to own any form of it in Australia
That is just downright wrong. In an event of war, civil unrest (which has happened here from time to time) or just personal protection this armor would be cumbersome and heavy, but also the difference between life and death. I only have it around for a worst case scenario.
Australia ,made paintball guns illegal without special permits.
Thats bullshit !! Everyone should be entitled to own body armor if they want !! I think its bullshit felons cannot own body armor .
I got that vest is there any way i can put neck and bicep armor
You would have to sew on the attachments
Get the composite plates at the steel plates are too heavy are use it for my level III and level four and PI work The strikeforce composite plates are pretty light and will fit There ar 500 composite plates with it as well
I need to try them
U paying those plates are twice+ the price
I’ve just got your exact same setup in the beginning of this 2020 year the tactical scorpion plates w condor vest. I’m 6ft and weight 265 I’m ok with it doesn’t seem flimsy at all. I’ll add trauma pads later but maybe that will tighten it up a little more than I would like, we will see.
Thanks for watching!
Very nice... i got this same set up at body armor megastore for $160 all together s&h as well
eric lopez Nice!! Yeah, it isn't anything fancy but it is a great deal!
I caught you discussing this purchase on Jona... I mean NightStryke's channel a week ago or so and you gave me the armor bug! Hope some other channels try it out and give their feedback. It seems simple, carrying armor, but I bet there some tricks we can learn
Nate2099 I'm going to order a plate and see how well it holds up against 7.62x54r!
travisp11 Oh shit!!! I'm glad I have notifications for your channel on. 😀
Dude, I have a habit about replying to just about everyone!
travisp11 I meant so it notifies me on my phone when you upload a video. I can't wait for that armor test! But always appreciate the quick response!
Nate2099 Oh! My bad! I should have a range video up for the Beretta 92 either this evening or tomorrow morning. I'm posting them early on Patreon so my supporters can have the first look!
The ar550 is so awesome. But so heavy and so pricey... but i want a throat and jaw and head armor also. The armor protects ur chest belly, but not from the spreading pieces that spread when the pellet explodes on impact.
This is true.
The coating on these plates are made to catch the shrapnel . Watch the videos on them testing them
I know this is old but would you recommend this for a security Guard? Thinking about getting this since I’m a SG in a mall where robbery and gun violence is at a all time high
DJ Money D It is bulky and hard to conceal. You will get a good work out if you wear it but I would recommend you look into something tailored towards your line of duty. My set up is relatively inexpensive and functional but from what I have heard from combat service men and women wearing those carriers for multiple tours has done damage to their shoulders and backs. It works but just keep those factors in mind.
That’s a maker (can’t remember exactly) who sells a shirt style vest that’s made to hold Kevlar panels
I wear it daily
Extremely easy to wear and extremely concealed
It’s 40 dollars for the shirt and I got 2 10x12 28 layer Kevlar shooter cut panels for 60 ea shipped
Definitely recommend it
I was going to say look around there is soft vest that about do the same as this one and alot lighter for your line of work. I've seen som Leo's wear soft armor but it's all up to you on how much extra weight you want to carry
Wear a plate carrier with level 4 plates. Have a big ass patch that says security on your plate carrier and helmet. Wear a ballistic helmet. Carry a rifle with a sidearm strapped to your waste. Wear some elbow and knee pads. Dress in black or green. Have 3 rifle mags on your plate carrier. Also put on a pair of ballistic goggles. Have a group of you dressed up like that looking operator as fuck. That should deter most criminals from robbing the place. There’s a reason nobody shoots up a gun shop or a police station. Don’t forget about training.
@Frankie TEE malls have jewelry stores with diamonds and watches that cost upwards of 10 grand, and also malls are a target for an active shooter, and malls get a lot of transients. it's not unreasonable to have a need for body armor if you're doing security at a mall. look at mall of america's security, they have a special operations division and k9 units
As a guy around the same build as you I'm curious to what size this vest is?
I think it was one size fits all.
I got the plate carrier 2 6x8 side plates and 2 10x12 plates rifle rated for 149.99 off of Amazon as like a combo deal
captain spaulding Very nice!
Is it just me or should those side plates be rotated 90°?
Mervin Secure1 Cambric Secure1 possibly but with this vest I don’t believe you can
Get the trauma pads and III A soft panel inserts.
Yup!
nice. I just got this body armor. Unfortunately i have to wear it all day for my work. I wanted better protection because it's getting dangerous out there. Hope i can handle the extra weight. My shoes won't i bet. have to change out the insoles more often probably.
I'm 6'2 256 pounds. I hope the 10x12 spartan level 3 plates is good enough. Got a good deal on it on ebay. I should have done more research first and i would have purchased a 11X14 plate instead.
I wasn't sure about the side plates so i got soft 6x6 side armor instead. I'll upgrade it to plates next year.
Note: i purchased 10X12 trama pads. I read that it helps with blunt force impact so your body won't get so damaged after taking a round on the plates. Kinda like a cushion pad between you and the plates.
I’ve seen a few videos online where the ammo was tested and it does actually hold up fairly well
How do they prevent spawlding (probebly spelling that wrong)
A polymer coating slows down the fragments after impact.
Wasn't sure about the one size fits all bit you are about my size to decided to purchase the plate carrier and same plates in the meantime while I save to buy something a li L bit more practical. Thank you !
Rogelio Hernandez Let me know how it works for ya! Thanks for watching!
Thx thats helpful. Isn't the backplate supposed to curve outward, not inward? I think you may need to reverse it
I will check and see. I think I want the back plate to curve around my back so it fits better so we will check it out.
Dont know anything about vests n the specific plates. Anything i should know off the top? How do i know if im not over paying etc?
Do some online window shopping. Compare prices. If in doubt just go to ar500.com and anything you buy from them will be high quality.
@@travisp11 no doubt
CATI has the same armor set on eBay for $179. It's a little bit more higher end, equivalent to Spartan armor.
Kevin McDermott I will check it out!
travisp11 need to point out, nothing's wrong with the scorpion armor. I just prefer the design on CATI. I use scorpion trauma pads because they're cheap. Not structurally cheap but money wise. They're foam pads and shouldn't cost over $20 a pair. Put the plates and pads in a condor carrier and it's one of the best cheap pieces of armor available.
Thick Shaft Wiener Nuts why do you have a psp
Ok im about 5'5 176 lbs im have trouble with getting the sode plates to sit the way there suppose to
thurman ray Do you have the same plate carrier as me? You can also adjust the shoulder straps, too.
I think the concerns over cheap gear are a little silly for certain things. A plate carrier isn't exactly a complex piece of technology. It's a piece of fabric that holds plates. We aren't talking about fighter jets where the difference between a cheap fighter jet and an expensive fighter jet makes a huge difference.
BCrafty121 True but on the other end if you get a junk carrier and wish to train with it you also don’t want something that won’t survive a few sessions.
Yes plus this carrier has space behind the plate for a large Kevlar chest sheet and double Cumberland 6x8 and larger Kevlar insert
Buy tac scorpion spall gaurds
Good advice!
Got my plate carrier for 40$ off wish haha....gonna put a few of these platein it
What size are the plates?
@@Mr.GunLifeJohnny I want to say they’re almost like 8 1/2 x 11 or about the size of a notebook cover
@@travisp11 what you think about the size , you think it covers plenty ?
@@Mr.GunLifeJohnny it does. I’m 5’10”, 205lbs now and it covers all the vital areas.
Does it come with plates?
You buy the armor plates separately.
@@travisp11 alrighty thank u
I love my Condor plate carrier. This is just for civilian use only and I’m not planning to live with it 24/7. It’s more than good enough for me. I don’t mind paying for a body armor like John Wick is using. Never-the less it’s good enough for what I can afford.
Right on!
Would you suggest it for armed security guard work? (Short hours, typically 5-hrs at most).
What's the name of the vest or model number
Chris Linder check my channel for a review. It is a Condor brand.
I see your dragonball z shirt.. Hell yeah brother!
Personally, I am only an 8K power level, LOL!
Good to see. I would go with the 6x6” side plates. Our builds are similar and I know I would not like that in my arm pits
Michael Kaye I agree
What about trauma pads?
I dont believe the additional pouches or space is provided for them.
How come you didn’t have soft armor in there as well ?
No room
Good information for beginners. You say "go ahead" a lot.
Zachary Fisher Yeah I know. I'm working on that.
I spent 180 for mine with plate front n back ..kinda overpaid it
How much weight in all of those plates ?.it seems heavy 8pounds per plate so is it 16 pounds in all
Closer to 25 or 30 with all 4 plates installed and the rest.
travisp11 really its so heavy are you sure u can carry all that weight strap in your body ..specially when it comes to a combat situation where mobility is the key to success when ur carrying that heavyweight vest its a disadvantage and can slow u down
Looks like a good carrier as good info and vid....Good stuff...
Scott F. I think it was a solid purchase. Thanks for watching!
How much for everything all together?
$185 delivered
That's dirt cheap for body armor. The plates are fully functional, right?
@@peterraab3411 yup, Mr. Guns N Gear did a range test on the exact same armor and it held up well.
Hey how's that plate set up holding up?
Thanks
Jack Rock just fine. I’ve worn it a few times to the range just to do a little shooting with my AR.
@@travisp11 did u get shot tho
@@406.dabber8 Absolutely not but Mr. Guns N Gear did a live fire test on these plates and they worked.
@@travisp11 nice hahah
i just bought this vest with all 4 plates and two trauma pads for 157.96 on ebay
Not bad!!
Travis I have the same set up, but with it the side plates. I know I should use them and its wrong of me not 2 but I'm 6'1 and about 280lbs so that means it's extra weight on me now I have lost weight from 300lbs so when I loss about 20 more pounds I will consider using side plates then thanks for the video and stay safe 11/25/18
Thank for watching! Yeah man, get yourself to the point where you can use the side plates and you will be even safer.
@@travisp11 thank you sir I can use them now but like I said I just need a few pounds off me
So we're can I get the plates at
Enjoy! m.bonanza.com/items/search?q[search_description]=1&q[search_term]=4%20PC%20Level
Thanks!! I have the same set up!!
Toree Williams Nice!
amazon link for the condor vest isnt working...
gianpty Just search for a Condor Tactical plate carrier on Amazon and it should come up. Links change on Amazon from time to time.
So does the vest come with the plates???
No
I saw a deal where the vest comes complete with the plates. Maybe it's a different vest.
Mark Isler there may be some package deals out there where you get that plate carrier in a package deal. I bought the plate carrier on Amazon and the plates elsewhere. This video is a bit old but the prices on these plates have dropped if you look around a bit.
Those side plates, I heard they rub your biceps. Is that true?
On me, just a little.
Great video, from a Bosnian comrade!
#USA
Bosanac Bosanac Thank you!
Bas i ja
Bought the exact same rig...great setup for the $$.
Just bought it on ebay for 140$ as a complete set :D.. now the carrier is alil different but still works good
Jacob G Right on!
Cool video, thanks.
Great vid.
Thanks!
Which size MOPC is that? (sorry if you already said in the video)
tombolarage I think it is one size fits all
Not a bad price at all.
It is a great deal!
Very hard to put on
It's a great carrier I recommend it.
It is definitely a good place to start!
see ifn ya can get a discount code for us !???
Theredneck Prepper I can give them a call!
Yea i have the same one
I know that vest I personally wore it and I have one still but, I would highly recommend you spend the extra money and get 3+ armor and no matter what kind of armor you go after ensure you get spall coating or else the bullet fragments will turn into shrapnel. Also steel plates are great because they have multi hit capability however speed or velocity will always defeat armor. One thing you’re missing is your trauma pads if you do not have the trauma pads which run about $20 for the set you are asking for broken ribs… I’ve been in the military for 20 years and I have taken a hit with armor on and believe me if you’re getting hit with 7.62 you’re gonna want it otherwise you will have them broken bones especially with steel plates and for the record I only carry tactical scorpion level 3+ and level four plates spall coated curved plates or AR500 3+ build up coated (very high quality). If you got the money and the time to wait for it I would recommend going with the AR 500 plates but tac scorpion is amazing and that’s what I was wearing when I got hit
THERE IS SOMETHING ALWAYS BETTER POINT BEING THIS IS GONNA SAVE YOUR LIFE IN MOST CITIES DEPENDS WEAR YOU ARE BUT WERE NOT IN A WAR ZONE... AND IDK WHAT HIS SAYS BUT THE ONE IDENTICAL TO HIS +3 WHICH IS WHAT I HAVE SO IM CONFUSED THERE AND THIS IS FOR IN THE CITY WHAT MORE DO YOU NEED FOR THE BUDGET I MEAN UNLESS YOU EXCEPT TO GO AT WAR WITH SOME ONE OR THINK THAT'S A POSSIBILITY WERE EVERY YOU LIVE IM BY CHICAGO SO IDK WERE YOUR FROM BUT I WEAR THIS GET A LOT COMPLIMENTS BUT MY PLATES ARE PLUS 3 IM COOL WITH IT BEING HEAVY IM A BODY BUILDER SO THAT NEVER BOTHER ME I GUESS THAT COMES TO EVERY ONE DIFFERENT CINE SOME ARE WEAKER THAN OTHERS AND THANK GOD IT COMES IN 3X IM WEAR 2X TOOK PICS YOU CAN SEE ON THERE WEB SITE THEY USED THEM..Rated for up to six hits from 7.62 Nato bullets (.308 Winchester) with velocities up to 2780 fps A stand alone armor plate with multiple hit capability - passed NIJ 0101.06 6 shot stand alone tests against 5.56 M855 M80 ball (greentip) at 2800fps and 5.56 M193 55 Grain FMJ at 2900fps. In house testing defeated 30-06 165 grain copper tip trophy.
Listed on the Department of Justice NIJ certification website.
Level 3+ plates are manufactured from a proprietary steel reaching Brinnell Hardness ratings in 600 - 630
Laser cut
Simply Stronger, Thinner and lighter than the competition
Our new proprietary steel core is far stronger than the AR500 - AR650 steel core. This core is hardened all the way through unlike the AR500 - AR650 which is only surfaced hardened. At only 0.197 inches thick nominal makes it 20% lighter than the AR500 and superior in strength. SEEMS VERY PROTECTIVE FOR THE PRICE AND IT WAS TRENDING ON EBAY AS THE BEST BUDGET ARMOR THEY WERE TRENDING 5 DAYS AGO ON EBAY AND AMAZON THE DAY I GOT IT THESE WERE TRENDING I GOT THE WELL CLOSE TO THE SAME ARMOR MINES PLUS BUT SAME CREATOR OF THE PLATES MADE IN AMERICA AND THEY ARE SO GREAT IS ALL I CAN SAY I WEAR MINE ALL DAY EVERY DAY AND NO ISSUES BUT I KNOW A LOT PEOPLE NEVER GOT TO LIFTING AT ALL SO BUT HEALTH IS IMPORTANT I MEAN WITH ALL THE GEAR THEY WEAR AND MILES I DON'T THINK SOME OF YOU COULD WALK YOUR NEIGHBOR HOOD I MEAN I COULD MAKE IT HALF A MILE I HAVE AND I DID NOT STOP CAUSE I WAS TIRED I WAS TOLD.. .. I KNOW YOU GOT YOU BETTER ARMOR SO NOW THIS ONE IS NOT AS GOOD BUT I BET YOU WAS JUST AS ENTHUSIASTIC WHEN YO7U GOT THIS ABOUT HOW IT WAS UNTIL YOU GOT BETTER USUALLY HOW IT IS THE HIGHEST IN A AMERICAN CITY YOU WOULD EVER NEED IS 4 BUT WHAT DO I KNOW // ANY KINDA ARMOR THAT STOPS AMMO EVEN UP TO ONE SHOT WHEN I HAVE THE 4 PLATE CARRIER AND CAN SAVE MY LIFE ANY AT ALL IS BETTER THAN NONE BUT WITH THESE SPECS FOR UNDER 200$ AND IDK WHY YOU WOULD NEED MORE THAN +3 CAUSE THAT'S WHAT MINE IS LABELED I MEAN MAYBE 4 IF YOU LIVE SOME WERE HORRIBLE BUT IM SURE THERE ARE MANY NAVY SEALS WITH THE HIGHEST ARMOR YOU CAN GET SURE THEY COULD JUST LET EVERY ONE KNOW HOW MUCH BETTER THERE MILITARY STUFF IS THAN US CIV'S UMM WAIT THEY WOULD NOT DO THAT THERE NOT SO EGOTISTIC ..
Thanks
Spartan Armor Systems has Package deals at 15% off. I picked up a Plate Carrier for $169.00 - Includes Carrier, 2 - 10x12 Swimmers Cut Plates, 2- Side plates.....
Mario Rodriguez That is a very good price!
travisp11 - A great price for your very own Ballistic Vest, inexpensive investment!
Mario Rodriguez I agree. Definitely a better price than what I paid!
nikolas cruz - they are nice but 21 lbs is heavy.
Laser keeps the temp more stable? Bruh a laser cutter cuts by literally melting the steel. CNC is better for temperatures bc it carves the metal not melt. Anything with friction has heat.
Great video
workman317 Thanks!
I want level 5 body armor with the trauma pads. If you are in law enforcement or security I would recommend level 5 get the thickest steal plates and the best trauma gear. Sure it's heavy but it will save your ass if you get shot in the chest either by a 12 gauge slug or a high Calibur riffle or handgun
True
@@custombikesandtrikes4374 True
Nicholas Cruz commented on your video
I like Spartan Armor systems!
David Loss Always a solid choice!
did you bought the base coat or spall coat?
Logan Nguyen I do believe these plates feature the anti spall coating. It is textured, with a rubberized coating. You may need to check Tactical Scorpion's website for details.
I'm sorry but those velcro flaps on the inside look like they would start being very uncomfortable after a short. Of time.
I’ve worn this on a few range trips just to get used to it and overall, the carrier is comfortable. Heavy, but comfortable.
@@travisp11 I just got myself for velocity systems Mayflower plate carrier. How do I carry 10 x 12 plates in a carrier that will accept 11 by 14?
@@john-dm4qd They should fit as the plates are smaller than the pouches.
Better ceramic plate✌️
Asher Belza True!
You have a great voice , keep it up
alex gachupin Thanks man!
I got the same shirt bro 💪
Nate Martin I’ve hard that from a few people!
Nice men thanks,you help me
Yup!
I will only wear it for fashion
Right on!
travisp11 Does that fit a teenager?
travisp11 Btw great video, i loved it
@@xspectresxx3461 Depends on your size. Some teens have the same measurements of full size adults. My vest is adjustable to fit multiple sizes. Please be careful if you wish to wear this as part of your daily wardrobe. Unfortunately this type of item makes people think of combat, police, fighting, etc. so it may get a negative reaction from people out in public.
travisp11 Oh ok, thank you. Do you think it’s a bad idea to wear it outside?
I like your DBZ t-shirt g
C. M. Thanks!
just bought my body armor your video helped out a lot in making the choice ended up going with a tactical scorpion 👍😁
@@King_Gengar094 Thanks for watching!
"you can always pay less" thats optimistic, from what ive seen condor is about the cheapest "real" plate carriers you can get.
Im sure ebay or wish.com has something even cheaper. Look around, its probably out there and cheaper. Not that Id recommend it.
I know you could potentially get cheaper stuff, but as far as im aware those are airsoft, these are the cheapest plate carriers that are designed as plate carriers, and for what they are they are fantastic
steve williams I hear ya. On my channel I like to test out some of the least expensive gear out there but I agree with you that you are really compromising if you go with a cheaper build construction. You could get by but no guarantees if it came down to actual use.