Great video brother will be installing mine as well thanx for the video it really help! Thanx for taking your time to make these videos to help out optima owners install different mods!!!
I really enjoy your videos and you inspired me to get a muffler delete on my 2016 optima lx, but I do not mean to correct you, but when I used my stock hose on my catch can with the slightest bend, it cracked pretty bad. I would recomend buying all new hoses as the ones the car comes with do not like bends. I still love your videos! I just wanted to let you know before it happens to you!😂
Very interesting, thanks for the info! I’ll keep a good eye on my stock hose and if it looks like it’s getting worn too bad I’ll swap it for some new hose.
One question does it come with the filter because you did not use it, it is not recommended, I looked at what can be installed in the entrance above, could you specify why you did not install it?
If not the same, it should be very close to the same. The only thing that I have seen being different in other videos is the location of the PCV valve.
Cool video just ordered mine today . Would you be able to lmk where you got the red oil filler cap for the optima . I have the 2018 lx but can’t seem to find it . Thanks for making a detail video on how to install
If I remember correctly it’s actually a Honda/Acura oil filler cap that just so happened to fit the Optima. I think most oil caps for smaller engines are pretty much the same size to cut down on production costs.
Did you install this on a regular non turbo 2.0L engine? If so have you caught a lot of oil? I'd have to definitely install one if you did. My engine has 120k and I always thought turbo engines should get this and regular engines don't need it because of the fuel washing away on the valves.
This is actually on a 2.4L non-turbo model and it’s caught a good bit of oil blow-by (emptied it twice now, although it wasn’t more than 1/4 full each time). Any GDI engine can benefit from an oil catch can.
Good video man! What would be the point of putting that filter on top of the catch can? I figure it has to have pressure in order to work but the filter would release pressure and make it not work so good?
That’s a mystery to me too, I think the company included it for looks. I’m not sure how it would work since like you said it’s supposed to build up pressure but that would release it all. Plus I think it would make it too tall and my hood would smash it when I put it down so I just left it off.
@@KDMCurt I think that has to do with cars that are not naturally aspirated, To help release some pressure build up in the engine and not shoot it back and force all that gunk back in or To make sure you don't get extra build-up of pressure in the intake manifold or something like that? Idk. That's my assumption.
@@KDMCurt Alright man after careful evaluation I have came to the conclusion that the filter that goes on top of the catch can is made to act like a second "smaller cold air intake" I guess to have 2 "cold" entry points.
Ahh okay very interesting, I might just install it after all. Although I still think it would be too tall for where I have it under the hood at the moment.
I will check it at least once a week although it probably won’t get very full that fast. It’s only trapping the excess residue so it won’t be much. It should fit but you may have to adjust where the bracket goes, I’m not 100% sure on the configuration of that model engine inside the bay but there should be room.
I empty mine every 10,000 and it’s usually about half full. Had it in since the car had 17 miles on it. So I’m sure it’s done a world of difference in my valves.
You might have to sort of wing it. See how people with similar engines have done it and rig up your own system. That bracket isn’t even supposed to go with that catch can but I drilled some holes in it and made it work.
Do you know if adding a catch can will void your warranty? I really want to get this same one for my car but I’ve been getting my oil changed at the dealership every since I bought my car just in case I’d need to use the warranty one day.
You know, I would call your dealership and ask. Some are strict but some are more lenient on mods like those. I mean technically you’re helping the engine last longer by adding an extra filtration system, but some could also see that as a modification to the engine that could cause harm if not done properly.
@@KDMCurt right on thanks. I’ll ask them next time I take it in for an oil change and if they say it will then I’ll just take it off the day Before I go in for any maintenance haha
@@lbchubs13 there you go haha I would take a pic of how it looks before you install it too. Sometimes the hoses have paint on them to indicate where it fits in the nozzle and if the dealership sees it’s not aligned they will know you messed with it.
@@KDMCurt yeah I seen that 1 just didn't just didn't want to have to spend that much on a bracket. If I can't fab something up here at work I might just have to suck it up and buy it.
This is actually a good video, easy installation and well explained, good job bruh.
Thank you, I really appreciate that!!
What it sounds like when Keanu Reeves does a Catch Can install🤣 Great job👍
🤣haha well thank you!
Need to monitor the catch can during the winter season as it will fill up with water rather quickly. Otherwise it does collect oil as intended
I watch 50 videos how to install the CC... and finally I found this one... pretty good job. Subscribe
Thank you so much for the support I really appreciate it!!
Great video brother will be installing mine as well thanx for the video it really help! Thanx for taking your time to make these videos to help out optima owners install different mods!!!
Adolfo Estrada Amen 💯
Thanks I really appreciate that!! I enjoy making these videos for you guys to show it can be easy and done to pretty much any car.
I really enjoy your videos and you inspired me to get a muffler delete on my 2016 optima lx, but I do not mean to correct you, but when I used my stock hose on my catch can with the slightest bend, it cracked pretty bad. I would recomend buying all new hoses as the ones the car comes with do not like bends. I still love your videos! I just wanted to let you know before it happens to you!😂
Very interesting, thanks for the info! I’ll keep a good eye on my stock hose and if it looks like it’s getting worn too bad I’ll swap it for some new hose.
KDM Curt for the win.
😁all day bro
Another great video! Keep killin it my man! Car is coming together very nicely
Thanks I really appreciate the support!!
Great video, I will be do this on my 2017 Optima.
Great video! Very well explained. Keep up the grind!
Thank you!! I really appreciate that!
One question does it come with the filter because you did not use it, it is not recommended, I looked at what can be installed in the entrance above, could you specify why you did not install it?
Great video .. thank you 👍
2.0 litre non-turbo? Looks like my 2016 Sonata which I def need one of these. They should factory install them.
This is actually a 2.4L non-turbo engine. Yeah it would be nice if they came with one but adding one yourself is easy enough.
I assume this tutorial works for all Kia/Hyundai 2400 GDIs 2016-2020
If not the same, it should be very close to the same. The only thing that I have seen being different in other videos is the location of the PCV valve.
Great video well explained!! Will this be the same for the 2013 ex model?
The location of the valves may be a little different on the engine but otherwise it should be pretty much the same install.
Great video 👍
Thank you!!
Cool video just ordered mine today . Would you be able to lmk where you got the red oil filler cap for the optima . I have the 2018 lx but can’t seem to find it . Thanks for making a detail video on how to install
If I remember correctly it’s actually a Honda/Acura oil filler cap that just so happened to fit the Optima. I think most oil caps for smaller engines are pretty much the same size to cut down on production costs.
@@KDMCurt ok cool I’ll give it a try 👍 thanks for the response
I just bought one for my 14 Kia optima. Would this be a similar install?
Should be pretty similar.
Can you add AEB and lane departure to a 2018 Kia Optima LX that has the blind spot warning and the rear traffic monitoring backup camera?
Unfortunately I’m not too sure on that one but it’s probably possible
When do you need to install a catch can ??
Whenever you want to, I mean it’s great to do as soon as possible but it’s not 100% necessary to get one on there.
@@KDMCurt 2017 ,12500 miles try take care
@@KDMCurt Does it revolk warranty
Did you install this on a regular non turbo 2.0L engine? If so have you caught a lot of oil? I'd have to definitely install one if you did. My engine has 120k and I always thought turbo engines should get this and regular engines don't need it because of the fuel washing away on the valves.
This is actually on a 2.4L non-turbo model and it’s caught a good bit of oil blow-by (emptied it twice now, although it wasn’t more than 1/4 full each time). Any GDI engine can benefit from an oil catch can.
@@KDMCurt mines not GDI, so I guess it doesn't need it. But it's a good option to put it on. Thanks for the information and response. Happy holidays.
@@ivan23caravantes44 yeah I don’t think it would hurt even if it’s not GDI. Happy Holidays to you too!
Would it work for a 1.6 kia rio
Good video man! What would be the point of putting that filter on top of the catch can? I figure it has to have pressure in order to work but the filter would release pressure and make it not work so good?
That’s a mystery to me too, I think the company included it for looks. I’m not sure how it would work since like you said it’s supposed to build up pressure but that would release it all. Plus I think it would make it too tall and my hood would smash it when I put it down so I just left it off.
@@KDMCurt I think that has to do with cars that are not naturally aspirated, To help release some pressure build up in the engine and not shoot it back and force all that gunk back in or To make sure you don't get extra build-up of pressure in the intake manifold or something like that? Idk. That's my assumption.
@@strikergizmo959 sounds good to me lol!
@@KDMCurt Alright man after careful evaluation I have came to the conclusion that the filter that goes on top of the catch can is made to act like a second "smaller cold air intake" I guess to have 2 "cold" entry points.
Ahh okay very interesting, I might just install it after all. Although I still think it would be too tall for where I have it under the hood at the moment.
Is your engine GDI? mine is MPI 2.4 not sure if I need an oil catch can
Yes this engine is a GDi
How often do you empty it and does this fit a 2014 Kia Optima sxt-gdi?
Yes bro it does but the bracket might need some holes drilled
Miller Dude thanks 💯
I will check it at least once a week although it probably won’t get very full that fast. It’s only trapping the excess residue so it won’t be much. It should fit but you may have to adjust where the bracket goes, I’m not 100% sure on the configuration of that model engine inside the bay but there should be room.
I empty mine every 10,000 and it’s usually about half full. Had it in since the car had 17 miles on it. So I’m sure it’s done a world of difference in my valves.
Does your oil smell like gas? When doing oil change
Not that I can recall, I’m actually getting ready to do another oil change on this car so I’ll try to see if I smell any when changing it.
Where did you buy the bracket that fits optima...can't find on Amazon or e bay
I got it from K5OptimaStore.com but it’s for another catch can which is why I had to drill some of my own holes in it to make it work.
@@KDMCurt thanks..they don't sell that one anymore..time for some fab...thanks for responding
@@tonybigham7513 ah dang, sorry about that.
See I have the 1.6t 2017 an I can’t find a video to help me put mine on 😞
You might have to sort of wing it. See how people with similar engines have done it and rig up your own system. That bracket isn’t even supposed to go with that catch can but I drilled some holes in it and made it work.
Did you end up getting it to work? I have a 2016 1.6t.
@@aaronjarnag no I never got the new adapter for the hose but someone showed me how to so as soon as I do I’ll make a video of you did one
Where did you get your black bracket from?
K5OptimaStore website.
Will this void my power train warranty
No, it shouldn’t. Check out the Magnusson-Moss warranty act on Google.
Do you know if adding a catch can will void your warranty? I really want to get this same one for my car but I’ve been getting my oil changed at the dealership every since I bought my car just in case I’d need to use the warranty one day.
You know, I would call your dealership and ask. Some are strict but some are more lenient on mods like those. I mean technically you’re helping the engine last longer by adding an extra filtration system, but some could also see that as a modification to the engine that could cause harm if not done properly.
@@KDMCurt right on thanks. I’ll ask them next time I take it in for an oil change and if they say it will then I’ll just take it off the day Before I go in for any maintenance haha
@@lbchubs13 there you go haha I would take a pic of how it looks before you install it too. Sometimes the hoses have paint on them to indicate where it fits in the nozzle and if the dealership sees it’s not aligned they will know you messed with it.
where did you get your bracket?
Got it from K5 Optima Store, there’s a link for it in the description.
Where did you find the bracket?
Got this one from K5OptimaStore.com but I had to drill some holes in it to fit this catch can as the bracket they sell fits a specific can they sell.
@@KDMCurt yeah I seen that 1 just didn't just didn't want to have to spend that much on a bracket. If I can't fab something up here at work I might just have to suck it up and buy it.
@@coolbreeze2286 yeah that was my problem I didn’t have the tools or materials at the time to fab my own, so this was the easiest route.
Should of hit me i get dual cans for stupid cheap
Dang, I’ll keep that in mind next time if I need another.
I'm running dual cans
You do throttle spacer?
I'm in need of some catch cans, where can I grab them stupid cheap as well?
Amazon has some pretty cheap ones. eBay is pretty good too.