HOWTO Corsair QL120 & QL140 RGB Fan + Lighting Node Core - Easy Installation & Setup Guide
Вставка
- Опубліковано 3 гру 2019
- In this video Im going to show you how to install and setup the brand new Corsair QL120 and QL140 RGB Fans.
LL Fan Install Guide: • HOW TO Corsair LL120 &...
Corsair QL120 Kit: amzn.to/33MJbxm
Corsair QL140 RGB Fan: amzn.to/2P9OqC9
Corsair iCUE Download: www.corsair.com/ww/en/icue
DISCORD COMMUNITY: grsk.co/community
PATREON: grsk.co/patreon
MERCH STORE: grsk.co/store
Some Cameras & Gear Used To Make These Videos
►Panasonic Lumix GH5
amzn.to/2mNQAfr
►Fujifilm X-T2 - amzn.to/2DyjQ1f
amzn.to/2DyjQ1f
►Panasonic 12-35mm f/2.8 II
amzn.to/2oriBVW
►Metabones SpeedBooster EF - MFT 0.71x
amzn.to/2twAF4H
►RodeLink FM Wireless Filmmaker System
amzn.to/2yKuI6b
#corsair #ql120 #ql140 - Наука та технологія
Thank you so very much for explaining the options for powering multiple fans with their pwm connectors. Being a 41-year old noob and not knowing how to do this, I've watched a dozen Corsair icue 220t build videos (the case that I'm using), where they all quickly gloss over the detail as to how they wired in the power to their fans. Super frustrating! You're the only one that actually clearly demonstrates the connections. I owe you!
THIS CHANNEL IS THE BEST OF THE SELF PC BUILDERS BIBLE EVER--------
Finally a good excuse to get some 140mm RGB fans for my AIO - knew I held off for a reason!
Good stuff GS :)
Love the instruction so much, super helpful! I was curious, what 3 way splitter would you recommend?
Huge thanks mate, I bought these fans and you made it super simple to install. Cheers!!
Hey man, I freaking love your channel music. You make some really really good shit.
Thanks so much!
I appreciate the video info. I will be adding these fans.
Thank you so much, now i know what to buy and how to install this
Thank you for being so simple and clear with this because im going to buy a 3 pack myself to my own rig! Good video as always! :D
After buying, then installing these fans, I feel that Corsair will be my go-to brand of case fans. I installed them in about a half hour, and on the first try they lit up brilliantly! Now to download the software so I can complete my lighting effect.
Hey there, one question? Can I install the fan hub cables to the motherboard?
I have watched so many videos about this matter and man that was the best !! ,instead of all others mambo jumpo goofing around not sawing anything, nice job👍😀
FYI for anyone reading and wanting to know, if you currently have the commander pro, you can also hook the USB cable of the core straight into one of the two USB ports on the CoPro to not waste a motherboard USB header. The command pro also has two lighting channels , should you only have a need for two of these fans, without needing to use the core at all.
@@lor7780 the commander pro has two lighting inputs on it. On top of 5 fan channels, and two USB ports. When you buy LED Corsair fans, you could definitely plug two of them into the copro. But the fans will also come with the lighting box, which you could plug that lighting box USB port into the copro usb pass through. Hope this makes sense
What if i have seven fans can i only use the lightning node pro only?
@@colin8601 i dont want to buy the commander pro. does that mean i will use two usb ports on my motherboard for each lightning node pro
@@abeidsalim8008 I believe they will still have a slot to Daisy chain them
I Have plugged my lighting node core into my commander pro ( in the USB port ) and it doesn't work at all what can I do?
Nice build bro that looks clean as heck👍🏻
Great tutorial man, Thank you!
thanks man, straight forward and very helpful. got yourself a sub :)
Great info, I just bought 9 of these to add to my new lian li 011 dx build. Thanks for sharing!
I ordered a set of QL120 and a couple sets QL140 fans for my Cooler Master C700M case this past weekend. The 140s were going to replace the original LL120 fans to improve air intake. The 120s are replacing the LL120s on my Corsair H150i Capellix. After 4 years, the LEDs on my LL120 fans are due for replacement because of faulty LEDs. Some of the LEDs are dead and others will not light up the right color anymore. It's a shame that Corsair LEDs don't last through the lifetime of the product as my LL120 fans are still working. With all that said, I'm looking forward to installing these new fans and seeing how well they improve the look of my setup. I'm also glad to know that the newer QL series fans are compatible with the iCUE Commander Core XT.
I am planning a setup with 5 QLs, 3x120mm and 2x140mm. Can I get away with just one lighting node core or do I need two?
I heard that plugging fans to the RGB hub is model-specific (meaning that you can't plug for example QLs and HDs to the same RGB hub), so I am not sure if same model but different sizes can be handled.
Cheers
What??? I was about to buy the other fans! Jaja just in time bro omg. Tech really changes fast lol
Excellent installation video! Subbed to you guys!
Want to see a tutorial on linking 13 fans using 2 commander pros and keeping them sequential with the commander pros
I'm a fan of this
@@SLO_MZ3 LOL no pun intended (also I saw you vent)
Video?
ua-cam.com/video/GdHRnIUjx1M/v-deo.html Here you go!
at 1:27 you answered a question that no one could answer for me " can you install one Ql120 and have the lighting work?" thank you sir!!
Wait so do u need this or not? I have the spec omega rgb case and it came with a lighting node pro, will I be able to plugin the rgb light bar from the case to the core? Do I even need the core and if I don’t get it will there be any consequences like limited customizability of the lighting?
Would be cool to demo the fan rgb patterns.
Dude you helped me SOOOO much Thx alot you got my subscription
I have 7 Fans to connected, what i need to buy? Do i need 2 Corsair Commander PRO or can i do it with Y adaptor ?
Took your advice and just purchased the 3 fan set and my question is can the 2 Lian LI fans that come with the case be used as well?
I have some old AF 140s and 120s blue led... im definetely switching to these on christmas
Thank you so mutch. You helped me alot. I got it first try with no Problems. :)
Another excellent install guide. So simple and straightforward my 4 yo could install these.
If i didn't already have LL fans i'd be all over these like a fat kid with cake. Gonna have to have a chat with Santa i think.
thank you for the detailed explanation
This was actually really helpful. I have an NZXT brand of fan with lighting controller, and I've been having problems getting the rgb to turn on with the fans. And I see why they're not working properly now. Thanks for that. You just helped me solved my problem completely.
Great video. Thank you!
Does the splitter come with the fans or you have to buy it seperatly? And can you change the rpm once you connected the fans to the lightning node pro? Really need an answer :)
Thanks for the setup guide Nick 👍❤️
Wonderful tutorial!
sick as always ❤ i feel LL fans look better
No way! The QLs are way cooler!
Main problem with the LL's is the LED's only face one way, the intakes on my Lian Li PC-011 look silly with the back side showing
Your smoking crack.
I don't like the fact that in this QL there's some hot spots where you actually can see the LED'S. the LL is more defused IMO
@@codestere1 hmmm crack
Good explenation ;)
Can I still use the commander pro and rob hub with the ql fan? Because it is easier for me to just plug the 4 pin fan connector into the commander pro
great video! Can you send me a link to the splitter which you used to plug the 3 fans into where you only need to plug into one fan on your motherboard? thanks
Does the Lighting Node Core provide power to the fans, or only the RGB lights in the fans?
Is it the same for the SP120 RGB PRO fans? Do they need to be connected to a fan splitter for power or is it just enough to connect them to the Lighting Node Core?
amazing, my friends literally needed this guild when he gets his hands on those fans. Great Guild!
Great video
Any video on connecting more than 6 LL / QL fans to command pro?
You need another commander pro
Nope i have 9 fans you need one commander pro and two lightning pro
ship another ship yea one commander pro and two node core
+ maybe some fan splitters depending on how many fans you need to install
You are very concise and precise you are very good
Can you mix / combine Corsair QL with LL fans? Any suggestions on connections? Thanks!
Just finished my first build with LL120's. I will probably swith to QL's when I'll take my loop apart for maintenance.
TIK did the same. Totally worth it.
why you want to replace your LLs for a worst performer? for looks? the LL fans are the middle ground, performance and looks
KamiKaZe MMO show me the difference 2 cfm makes on hwinfo.
@@currentlykent4593 for the case are ok but I'm not sure they are the best fit for radiators specially for 9900K maybe for a Ryzen 5 or 7 is okay
KamiKaZe MMO mine does just fine. 9900k and h115 plat. 2 140mm ql’s. OC to 5GHz. Temp on the liquid running through the aio never gets above 38C. In a Phanteks evolv matx case to boot! I have some custom panels on the way to get some better flow through the front and top.
It´s a very helpfull VIDEO.
Hey, should i get the LL140 or the QL140 and why? Both of them seem to be nearly similar :/
if i have the LED light strip from corsair am i able to connect that to the lighting core or would i still need the lighting node pro for that?
Hey Nick! First off, I appreciate all your videos. They have helped me build my first PC that is almost complete. My question is about a 7th fan. I am using all QL and after research it looks I would need another RGB Led hub to add one more fan. Is there any other easier method that you could recommend? Thank you so much... Details: I am just using the Node Core for the 6 other fans. Simple connection no commander pro etc..
Did you figure this out?
Are all sata power cables from psu the same and can be plugged into the lighting node core? Asking because had a previous experience
where i plugged in a sata powered led controller from coolermaster and it smoked and fried.
Can I connect them to the Corsair LL120 RGB LL Series?
You helped me alot ty
I'm quite confused about the hubs and fans, little help please?
Looking to get myself the Corsair Hydro 115i RGB Platinum (Which come with 2 ML PRO fans on the radiator) and 3 QL Fans just for the rest of my computer.
What hub(s) do I need to buy for all this to sync up, how and where do I plug each thing in, and if the ML PRO Fans (from the Hydro) go into the motherboard while the QL Fans go into the Lighting Node CORE, then into the motherboard - do the lights / temperatures still sync up, or will they be fighting / confusing each other?
Hi when using the PWM spiltter for x3 fans, on an Asus p8z77-v pro what fan channel to use (1-4) for the connection or don't it matter. Thank you. Great vid by the way !!
Hi Nick, newbie question here. Can I connect 3x QL120 and 3x LL120 fans using the H150 Elite Capellix's Commander Core? Thanks
Happy holidays guys😘 I wish all of you the best of luck
It’s almost 2020 holidays lol
Would this work with the H100i platnuim, if I wanted to replace those fans with these?
Can you add the fans of a Corsair H115i Capellix water cooling system to the Lightning Node core as well?
If i buy the corsair crystal 680x case which comes with 3 LL RGB fans and a lighting node pro, and i also purchase a commander pro, would i be able to run a 8 fan set up with 3 LL fans and 5 QL fans ? i understand you cant mix the fan types correct ?
Ok I need help I bought 6 of these fans aka I bought 2 of the three bundle Corsair ql120mm fans do I do this whole thing 2 times? Or something I need help please
where can i find an install for a system running 2 of the RGB controllers for 12 of these fans? 6 fans isnt enough lol
Hello, great work on this video!
Is the 3-way PWM splitter included in the box , or do i have to buy seperatly? I do not have enough empty PWM headers in my motherboard, to individually connect all 3 PWM cables..
ΧΡΗΣΤΟΣ ΜΗΤΣΙΑΡΗΣ the 3 ways are separate but if you have a 3 fan AIO cooler like the h115i it will come with one
@@friendlystuart2303 Thank you for you helpful response friend
we're you able to control the fans rpm with the fan splitter that u used?
Wish you would say what the pwm cable plugs into exactly Is it a system fan 1?
Great Installation guide fams. These fams look pretty epic and I am glad they changed it to the one controller now
Fans* you stupid idiot
Finally, a video for people who are dumbstruck like me! Thank you!
would you recommend it? Pls help
I just got 9 of these going to try to use them on the 360mm ek rads on my build I’m in the middle of doing. I have the commander pro and 3 lighting nodes I also got a gift from ek a connect 21 or something
Will I be able to add this to my Td500?
The lighting node core comes in the 3 vents set box?
What about the price, don't you think it's too expensive for a fan with just ok airflow and noise level?
a question, i have just 2 sys fan headers on mb, can i use a split cable from the 3 fans to motherboard?
My board has only 3 fan connectors for the 6 fans. What do you think ist the best way to connect?
Very nice video.. as always... How are the sound lvl´s from thise fans?... im considering the 140mm for my Bequiet 801TG case.. :)
Silent
@@GearSeekers Thanks for your feedback m8 :)
i can use it for the hydro h115i platinum rgb? use the same connectors as ml pro rgb?
How to connect 7 ql120 fans alongwith lighting strip also ?
Also, do i need a pwm connector for fan power?
I´ve seen a quick comment somewhere that you cant plug the LL series in the same controler of the QL, is that correct !?
TheZorackzz yes it is
Where do you get your 3 way splitters from?
if i have 6 fans would using two separate cores cause any complications?
Where did you get the 3 way splitter for the fans?
Can you set each individual fan as a different color?
Pls give a link to the fancable splitter. i dont find it
so i have 2 QL 140 fans and 4 rgb strips connected to each other, the commander pro and the lightning node core.
ive connected the fans to the commander and thier rgb's to the node core. i also connected the node core usb to the commander and the commander's usb to my MB and for some reason. the led strip who's connected to the commander works fine but only 1 fan leds are working. i configured 2 fans at icue and nothing working. when i switch their cables the other fan works fine so it mean that the fans are faulty or anything. any ideas?
You could also use commander pro to power the fans pwm
Can we connect the SATA alimentation directly on the motherboard ?
Awesome video for a PC noob like me.
Can the node take in argb for different brand of fans like arctic?
Hello!
is it possible to use ql and ll fans simultaneously, on the same lightining node pro?
Well I wish someone actually answered this. because the answer is no. Found out the hard way.
I just tried to add a QL fan to my set up, I used the rgb header on MOBO but the lights don’t really work too well. I can’t change the colours or anything. Do I need the rgb Hub?
The pwm splitter I picked up at micro center is 3 pin into mobo header. I see the fans are 4 pin will this be an issue? Thank you
My problem is I have a motherboard that only has 1 system fan port, however i have 4 fans, would I need to buy the splitter or a new motherboard?
Please tell me which usb cable attached in lightning node core inner side. 9pin or micro usb or 5pin... it's Soooooooooo Helpful for me... Cuz I purchased lightning node core without usb cable, it has just sata cable.....
Question the Y cable was that included???
Could some 1 add the link to the 3 way fan splitter please...1 pc build so I'm new to this thanks
How much brighter is QL compared to Corsair LL?
Can you connect this to a coolermaster c700p fan controller so you can adjust the speed from the front IO
Can you use the node pro for the ql and can you use ll and ql at the same time ?
So, thats exactly the Same question i want to know. Do you have an anser now?