Make A Mini Crane For Workshop | Homemade Mini Crane
Вставка
- Опубліковано 26 гру 2020
- Dear Everybody,
Today I would like to introduce How to make A Mini Crane From Scrap.
I hope you feel interested in my video.
Please like, share and subscribe my channel to see more videos.
Thank you so much!
#fawabros #crane
Однозначно лайк за разные штуки. И особенно за чистоту в мастерской!
Thank you so much!
@@fawabros q991q
Love your work, useful stuff, but stay safe my friend.
Thank you so much!
Excellent work yet again 😎👍 love the detail, much appreciated 😎👍💵🤜🤛💥 my workshop has gotten even more tools since making some of the things you have shown how to make, Another excellent video, very cool😎👍
Thank you, my friend!
@@fawabros genius work, making your tools has made my workshop very efficient, keep up the great work my friend, the world needs more people that help to make the world have more opportunities for change and growth, this channel definitely makes innovations affordable and possible, having access to be able to make the tools required to make work in the workshop easier is priceless, it is much appreciated 🙏
😎👍🤜🤛💥
I am being kinda picky here, but the cable clamps are on backwards. The cast part that the nuts tighten against is the saddle and the steel u-bolt is the stirrup. Remember the adage, "never saddle a dead horse" It has to do with strength and cable clamp failure, but the saddle never goes against the tail end of the cable. As installed, the stirrups are pinching the load bearing cable causing a weak spot.
BRAVO BELLA idea
👍👍👍👍
Thank you so much!
Like this project alot. Been considering buying an industrial one to use as a patient lift for paraplegic. Maybe it would cost much less to build. Thanks!!👍
You are welcome!!!
@@fawabros a
I like it 👍
Süper olmuş ellerine sağlık kardeşim
Thank you so much!
The best inovator 👍
Thank you so much!
Very commendable
Kudos to you
A good gadget for the workshop. Thank you. Like and subscription. Good luck to you.
Thank you so much!
Seu trabalho e muito bom sempre que eu posso eu assisto falo de São Paulo Brasil
Thank you so much!
Muy buen trabajo amigo ,felicitaciones. es grua para una tonelada?
Max is 250 kgs.
Gracias felicitaciones y siempre adelante
Thank you so much!
Great job
Excelente!
Thank you!
Awesome n great work
Thank you so much!
Thanks that’s terrific
Thanks!
Nicely done 👍👍👍Thanks for sharing
Many thanks for your support!
LQQKs good. an engine hoist could do the same or need to modify but if you have scrap laying around and have the time. I prefer building things instead of purchase but time in money... needs counterbalance and those wheels will require a perfectly clean floor.
حدادة جميلة وعمل دقيق واعمال بشكل الدقة
Thank you!
bro u have good brain mansha allah
Thank you so much!!!
Keep it up👏👏👏
Thank you!
Good , very good In BRASIL
Thank you and welcome!
Good work keep it up
Thank you so much!
Nice job bro 👍
Thanks!
Excellent 👍👍👍👌😊😊
Thanks!
you could also add counter weights at the base for more stability. cranes use concrete blocks.
Many thanks for your advise!
What welding machine are you using bro?
perfect
Thank you so much!
It all looks sufficient for what he's doing although I see room for improvement. Actually I am using some of his ideas for a different project. There is a reason an engine hoist is built the way it is. The front legs extended forward as outriggers would give much better stability as you can see when he moves it with a load attached.
Many thanks for your opinions!
what are the dimensions for the pipe thickness? great video btw, im looking forward to making this for my garage.
5 mm thickness
🌹🌹🌹
sáng tạo tuyệt vời
Thank you!
Ficor top
Thanks!
😮 wow suuuuuper 👍👍👍👍👍👍👍
Thank you so much!
👍👍👍💪💪💪👌👌👌
عالی یه دانشگاه واقعیه
Thank you so much!
هايلة عمل جميل جدا
Many thanks!
I think you can add counter weight but well done
It used for light weight so I didn’t add counter weight.
@@fawabros It is logical that your design does not carry counterweight, since the winch you chose is the most economical and light load, but if you can buy one that can withstand more weight, for example 1200 lbs, and you would need the counterweight ....
رائعة
Thanks!
♥♥♥
nice pls.fully diteal post sir
Good
Thanks!
Nice build on the crane, but you might need to cut a slot where the cable goes through the cross piece on the bottom and maybe the top do that it doesn't wear the cable.
Many thanks for your opinion. Actually, you can see the cable is good operate on the top.
Great 👍
Thank you so much!
Thank you.
You are welcome!
Hey you did good but to call your job EXCELLENT you need to put the measurments and materials description.
Thank you so much!
People can figure it out, the measurements are shown there as he makes the thing with a tape measure, how lazy are you?🤷🤦, he shows how he made it and you're actually complaining that he didn't go out out his way even further to list every little detail? 🤦Seriously figure it out for yourself, he has given you enough information to figure it out for yourself, if you cannot do that than don't complain because that is at that point just being lazy... Sheesh, not even thanking him for figuring it out and posting it online..... For FREE, really if you cannot figure out from the video than there is no way you'll actually be able to make it period.🤦
Fax where is the specs
Hello Demesew, at this very moment I am doing the appraisal of how much it costs me to buy the commercial elements, and then dedicate myself to do the reverse engineering and improve some construction details. Because I am interested in doing it, since my wife is in poor health and I can not lift it, I will let you know when I finish it. If you are interested let me know. Greetings from Venezuela...luisarias3dcad
a great work . but could you tell me the design (dimension and force) .i want to do it for myself too.
fantastic idea, although i dont think i can turn that thing as fast as he did.
Thank you so much!
แน่จริงๆครับ
Thanks!
HI Fawa Bros, do you have any plans one could follow to build one of these? I am a new metal worker and am not sure exactly what all the dimensions and supplies you need for this project . Do you have anything you could share? I love your projects btw and this would be very helpful - thank you !
you put all three clamps on wrong. the saying to remember is don't ever saddle a dead horse. you have a dead end and you have part of clamp that looks like a saddle. That part always goes on the loaded part of the cable.
👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks!
Make the front legs a tad bit longer for better stability
Many thanks for your advise!
@@fawabros ideally they need to be past the lifting load
❤❤😂😂🎉
WHAT TYPE OF WELDER ARE YOU USING TO BUILD THE MINI CRANE
I used TIG welder.
Looks awesome but I'm trying to understand why there are 3 bearings inside the top of the tower where the jib pivots. The jib pivots off the 5/8 bolt. Seems a waste of 3 bearings. Any piece of pipe stock would have don just as well.
Many thanks for your opinions!
@@fawabros YW. But it was more of a question.
good to have tool in the shop but why the mask? 😂
Private reason.
Like
Many thanks!
Amigo cuál es tu máquina de soldadura me fascina
Thank you so much! It's TIG welder.
What kind of welder is that?
I used TIG welder.
👍👍👍👍❤️❤️💚💚😘😘😘😘😘😘
٧
Во многом согласен, но не во всем. Пример с грелкой и полотенцем не корректен, объем стяжки это теплоемкость, инерционность нагрева, а полотенце это теплопроводность, ограничение теплопередачи.
Sorry I can't understand your opinions.
Sorry I wrote in one video, for some reason I got into this.
Nice build but the absence of washers distresses me. I like a washer under every bolt head and every nut.
Don’t inspect your vehicle then.
Many thanks for your suggestions!
Show
Thanks!
Really nice... can we dimensions
Please see detail measurements in video help me. Thank you so much!
Hello Gajula, at this very moment I am doing the appraisal of how much it costs me to buy the commercial elements, and then dedicate myself to do the reverse engineering and improve some construction details. Because I am interested in doing it, since my wife is in poor health and I can not lift it, I will let you know when I finish it. If you are interested let me know. Greetings from Venezuela...luisarias3dcad
10:27 thanks for your work. What is the name of this materyal
If I don’t understand wrong your opinion, it’s winch. Please tell me if my answer doesn’t make you satisfy!
@@fawabros do you have video made this material?
I am sorry for my English. thanks
3196T24 fits......luisarias3dcad
Hello sir..can you make engine stand?
I can do but let's me think about it! Let's wait!
Excellent but the dimensions of steel please
Thickness of steel is 4 mm
Hello Sidisaid, at this very moment I am doing the appraisal of how much it costs me to buy the commercial elements, and then dedicate myself to do the reverse engineering and improve some construction details. Because I am interested in doing it, since my wife is in poor health and I can not lift it, I will let you know when I finish it. If you are interested let me know. Greetings from Venezuela...luisarias3dcad
👍👍👍 최고
몆kg까지 가능한가요
No, up to 200kgs.
Tem como enviar o projeto com as medidas de tudo e todo material usado é pq pretendo fazer um guincho dessa pra minha mãe se locomover melhor pois ela e acamada ajudaria muito inclusive mande o diâmetro dos ferros usados tudo se puder claro muito obrigado.
I don't have drawing to share. Please see detail my video and make it for your family.
Hola Carlo Fernando, en este preciso instante estoy haciendo el avaluó de cuanto me sale comprar los elementos comerciales, para luego dedicarme a hacer la ingeniería inversa y mejorar algunos detalles constructivos. Porque yo estoy interesado en hacerlo, ya que mi esposa se encuentra delicada de salud y yo no puedo levantarla, te aviso cuando lo termine. Si estas interesado me avisas. Saludos desde Venezuela...luisarias3dcad
Cost kitna lgega bnane m
less than 100 US$
@@fawabros If you get all your proposed materials from the scrap yard, that would be the cost at the present time?
Y el guardacable?
Turn buckle
Yes.
hi bro could you pass me the list of materials to make one like, or put it in the description that would be very cool if you put the list of materials in the description
Please see detail materials in video help me. Thanks!
Hello Rodolfo at this very moment I am doing the appraisal of how much it costs me to buy the commercial elements, and then dedicate myself to do the reverse engineering and improve some construction details. Because I am interested in doing it, since my wife is in poor health and I can not lift it, I will let you know when I finish it. If you are interested let me know. Greetings from Venezuela...luisarias3dcad
How many kilograms can you get?
200kgs, bro.
KINNA TOUGH TO SEE........LOOKS LIKE U-BOLTS ARE ON BACKWARDS ???
"NEVER SADDLE A DEAD HORSE" !!!
You are so right
M
Do you have share me for idea design and make easy and light weight crane attach with small truck. We have problem with shipping our machine to customer. Many time need many person to help take heavy load around 100-200 kg.
???
A00q