Nice design and demonstration. Would recommend full welds on the gussets and maybe swing-out outriggers instead of sliding post supports. Thanks for the idea!
На самом деле работа проведена большая. Всё довольно таки функционально. Если бы в мои 12 - 16 лет у меня была такая платформа, я бы наверное пошёл учиться на крановщика.
To ballance the load on each battery you should have the positive and negitave leads attached one to each battery. Not both leads attached to the same battery. It has to do with the internal impedence of the battries being diffrent values.
I don't see a lot of application where this would be used. Originally I thought this was going in the back of a truck. Here is a small list of things that you might want to look into fixing on it. 1) You definitely need a bearing for the tuning part cuz it's metal on metal binding. 2) You need more support for the base. Way to much flex that the welds can break, Especially if you go full extension on the crane arm. 3) Is the inverter on all the time? The batteries will die really quick if that is the case. 4) Pull out stabilizers on both sides cuz only being able to use 2 sides limits full use of the whole setup. 5) Either motor assistance for walking movement or towing capability by a tractor. 6) Solid wheels for better weight support, it looked like you had air filled wheels that could pop under extreme weight.
Nice design and demonstration. Would recommend full welds on the gussets and maybe swing-out outriggers instead of sliding post supports. Thanks for the idea!
You are a genius!! Hats off to you!!👍👌
Good job. Thanks for sharing
Welcomed!
Cẩu này bác lắp vào xe rùa điện hay hơn đó. ?? Chúc bác thành công
Many thanks for your suggestions!
Ide mu sangat kreatif.
Salam kenal Dr. Indonesia
Thank you so much!
Very useful especially with pavings etcetera. Nice one.
Here's what I need That's what I need! 👍🏼
Yes, I think it’s very useful for your work.
Love your creativity. Bravo from Canada!
Thank you so much!
Good job friend .
It is really useful for workshop and small construction site .
Thank you!
Hello Kwando beautiful project professionally made good job well done
Thank you so much!
Bro, you are a genius
Thank you so much!
Обязательно продолжайте снимать новые видео!
Yes, thanks!
excelente valeu muito obrigados pelas as dicas um abraço
Thank you, too.
Man, you are awesome !
Congratulations!!! It’s awesome!!!
Sorprendente y muy practico.
Very Nice.
Thanks!
You are best 😚
Thank you!
I just made a lift for my basement stairs with a harbor freight hoist. You have inspired me. I wonder what else I could move around here? LOL Thanks!
Para mis dolores de espaldas !! perfección 👌🏼
You are welcome!
Красота, мастер.
Thanks!
Nice!!
Thank you!
De cukiii lett.
Good
Chiếc xe cẩu thật tiện lợi
Thanks!
Хорошая игрушка для пацанов 10 - 16 лет.
Thank you!
На самом деле работа проведена большая. Всё довольно таки функционально. Если бы в мои 12 - 16 лет у меня была такая платформа, я бы наверное пошёл учиться на крановщика.
Good Afternoon Po Kwando Technic Sa Umaabot PHP 1 Million Subscribe UA-cam Channel.
Thanks!
Hadir 🙏
Bravo .ok güzel
Thank you!
To ballance the load on each battery you should have the positive and negitave leads attached one to each battery. Not both leads attached to the same battery. It has to do with the internal impedence of the battries being diffrent values.
Many thanks for your advise. But in this video, I used same batteries. So they won’t have different values.
@@KwandoTechnic still the values differ even though the manufacturer, batch may be same. Usually the parameters are tested by an assembler
OK so there are some things I would definitely change but I think he did a good job.
Thank you so much!
Great
Thanks!
Excelente!!
Thank you!
The boy is done playing the toy
Parabéns! Muito show de bola
Thank you so much!!!
Interested to see how you do your tig welding mostly without filler rod. I assume electrode is set well back. Nice projects
Thank you so much!
@@KwandoTechnic 1
Parabéns gostei muito
Thank you!
I don't see a lot of application where this would be used. Originally I thought this was going in the back of a truck. Here is a small list of things that you might want to look into fixing on it.
1) You definitely need a bearing for the tuning part cuz it's metal on metal binding.
2) You need more support for the base. Way to much flex that the welds can break, Especially if you go full extension on the crane arm.
3) Is the inverter on all the time? The batteries will die really quick if that is the case.
4) Pull out stabilizers on both sides cuz only being able to use 2 sides limits full use of the whole setup.
5) Either motor assistance for walking movement or towing capability by a tractor.
6) Solid wheels for better weight support, it looked like you had air filled wheels that could pop under extreme weight.
Good idea Can you please give link to the electric winch and from where to get ?
You can refer this one: amzn.to/3Avu77D
Genial...
Thank you so much!
Muito top
Thanks!
Trus berkarya hingga hidup berguna 10:04
After watching this I decided to pick up all wood and block by hands…
You’re very strong in long time!
Uma maravilha, muito bom , engenharia , show, abraços.
Thank you so much!
👍👍👍👍👍👍👍
Для пенсионера который самостоятельно что то строит у себя на даче сойдёт ,а практической пользы нет , быстрее о проще будет просто нанять помощника
Many thanks for your opinions!
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍×1000
Thanks!
👍🏼❤❤❤👫🏼👍🏼
Chào bạn mình muốn mua cái mô tô điện như thế có được ko
Nói tiếng Việt thì mình với đọc được
🥰🤩😍
Bạn là người Việt Nam
🇮🇶🙋♂️
Where are you ?
Timor Leste, bro.
What is the heaviest weight it has lifted, or what do you think it is the maximum it could safely lift?
Depends of the motor, I saw minimum about 250kg
Crane electrik
Yes, sir!
Pakai las apa itu ?
I use TIG welder.
How to charge your battery?
I change batteries, not built in charger inside.
it would have been a lot easier to simply pick those boards up by hand.
How much hp of motor used
4 HP bro.
Soalnya kami tertarik dengan produknya gerobak pintar dan berapa harganya, dijawab ya..
Can anyone give me the list of parts used in this build
Ты, че?! На ось ни те подшипники установил(
Many thanks for yout opinions!
Me passe teu contato tenho interesse na empilhadeira
I don't sell. Sorry. You can make it base on my product.
Adelcio
Bisa di pean untuk dibeli ngga tlng jawab
Warum mit Maske?
Private reason. Sorry!
34
978kg
wasting of money
Why?
achète toi des bras !!!
انت مسرج
Thanks!
merhaba yatalak bir hastayı yataktan kalkamayan evin banyosunda götürmek ve yıkamak için bir model yaparmısınız
hola amigo me puedo contactar con usted via whatsapp