Це відео не доступне.
Перепрошуємо.
EGR Valve Cleaning - Volkswagen Golf Mk5
Вставка
- Опубліковано 22 лип 2021
- Removing and cleaning the EGR (Exhaust Gas Recirculation) valve on a pre-2006 Volkswagen Golf Mark 5, 1.4L petrol. If there’s a fault with your EGR valve, the check engine usually light comes on with the fault code P0408 being the most common. You might not notice any change in how the engine runs or you may notice that the engine idles rough, has poor performance or even increased fuel consumption. If so, then a dirty or clogged EGR valve is one of the possible causes of these issues. If the valve is clogged up with carbon deposits then cleaning it may fix the problem. It’s certainly worth a try before replacing the valve. If you do need to replace it, the part number is 036131503T. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Socket Set ~ amzn.to/3BmbuHr
🚗 EGR Valve ~ amzn.to/3A75gZZ
🚗 EGR Cleaner ~ amzn.to/3v6sTjh
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.
I had lots of problems with EGR valves in the 1.6 FSI Golf engine. In the end I had the EGR blanked off and a remap to deactivated it in the ECU. The car runs SO much better. Idle is better, it revs cleaner and pulls a little harder too. The blanking plate was £5 and the remap was £150. Not cheap but one of the best investments I've made on my Golf. The car passed its MOT yesterday too, so no issues with emmisions, and the remap prevents a check engine light from coming on.
Perfectly done . I have the same engine on my Seat Cordoba and this is exactly the way to deal with the EGR valve!
Thank you !
Will be giving this a go tomorrow cheers
Thanks bro for your videos has been very helpful 🙏 I fixing up my golf car because of you very appreciate 🤙🏽
You're welcome 👍
Also you need to clean the pipe which connects to egr valve. Also after cleaning you need to check the work of valve itself, if it move good.
I’m doing this tomorrow thank for the information
Good luck!
Great video
Thanks!
Thanks for the videos grat help👍appreciate it
No problem 👍
It’s ideal to clear the Egr Valves on Volkswagen to improve performance . 👏
Nice video frend sharing
Thank you for watching ! :)
I was doing exactly this on my SEAT IBIZA just a couple of hours ago and unfortunately I broke the rubber hose connector ( not the radiator hose but the connector to which the radiator hose is connected). I don't know what to do now. 😥
The best video I saw!
But should be clean the pipe of EGR? Or its ok?
Thank you. If it looks clogged then you should probably clean it as much as possible
9:53 Whats the purpose of the little black hose on the valve? My Polo 9N3 1.4 16V is leaking air through that. (i have tested it with a smoke leak detector)
I have Golf+ 2006 1,4 petrol engine. For my surprise the EGR valve and the metal tube are missing. Everything else us the same as in the video. I wonder if the previous owner removed it..
It's possible that they used a blanking plate and got rid of it.
I have a problem on my dashboard light is coming EPC light what should I do
In my case? Cleaning fluid? 20 bucks, new seals 25 bucks. New EGR valve? 40 bucks!? WTF! So there is a new one on it now, but that was kind of weird.
Thanks for the video!
What bluetooth OBD scanner are you using? Do you provide a link? Thanks!
This is the one I use: www.ebay.ie/itm/262905006630?hash=item3d365c0a26:g:GocAAOSwax5Y0cS-
@@screwsnutsandbolts Thanks!
You're welcome !
I was doin this but on the right side of the EGR the nut was not coming off the bolt was come out with the nut so I stop and put back in because I not sure if I should continue to take the full bolt out have you come across this and what would you do I like to know
Sometimes it comes off with the bolt if the nut has a lot of rust, don't worry about it! A little harder to get back on it's place but same method!
Hello! What kind oft software is it?
i'm already buying two OBDII both not working on my Polo 4 1.4 9N. it seems different protocol.
what yours OBDII?
The app I used was OBDII
Is it worth cleaning the inter cooler pipe out too if it’s clogged, using dawn carb cleaner. Cheers.
I'm not sure. This link might help: natrad.com.au/info-advice/how-to-clean-a-turbo-diesel-intercooler/
@@screwsnutsandbolts sorry I’ve confused you. I meant the silver pipe u disconnected from EGR valve? Surely that’s full of carbon also. Also can you not completely disassemble this EGR valve. I have same car. And also an astra, 1.7cdti where u can completely break down the EGR and clean it thoroughly?. Cheers
Ah ok, I was just focusing on the egr valve itself but you could spray carb cleaner through the pipe too if it's clogged up, however I don't think this egr valve unit can be disassembled
Dlaczego trzeba odłączać akumulator?
Amazing tutorial on how to remove it. Thank you! Btw do you only spray cleaner or also use a brush to remove the buildups
Thanks !. You could use a soft toothbrush or something like that but don't use anything abrasive
@@screwsnutsandbolts too late. Used a screw driver. Oh well wife's car. It runs now lol 🤣
lol 🤣
good video .only thing you missed was you did not clean the throttle body before you put it back had loads of carbon under neath it ma as well clean it before you put it back together
Thanks, I did that as a separate video: ua-cam.com/video/fNNcdjmyYOY/v-deo.html
@@screwsnutsandbolts yes just seen from your post lol noticed it as you was taking it out how much build up under neath they was .good minds think alike again great video content
Thank you !
Hello I discovered this problem on the computer
Cod P0407 ( Exhaust gas recirculation (EGR) valve position sensor B - low input
Exhaust Gas Recirculation Sensor B Circuit Low )
I don't know what to do. Is it possible to change the EGR valve or just need cleaning?
I would try cleaning it first to see if that fixes the problem
My 1.4i 16v shakes and revs go down to 400 when I cold start it,but after 2min it runs normally,also my check engine turns on sometimes,and sometimes goes off,also I noticed too when I cold start,the radiator vent turns On even when the engine is cold🤷🏼♂️what should I do?
It could be a faulty coolant temperature sensor: ua-cam.com/video/vLeeBaOnXuI/v-deo.html
@@screwsnutsandbolts thank u very much
Помогло или нет , после трёх запусков обратно чек незагорелся?
Yes it cleared the fault, but the fault P0403 can also be caused by a faulty egr valve solenoid or wiring
Clean the egr pipe aswel as that is full of crap to you don't have to get it out as its a mission to get out just spray in place if you don't clean it 1 month later you get the same problems as I found out myself
If it's a BCA engine, why don't I have an EGR valve? I have the same car from the same year and the same engine
always do a zoom in first, otherwise we can't see exactly where you are working.
Is that vacuum hose connected to anything?
Which vacuum hose ?
@@screwsnutsandbolts that round black and white plastic which is connected to egr via that small rubber hose
Puede poner el número de referencia del sensor MAP ? Gracias
It could be 036906051G, 03C906051 or 03C906051F. You will need to double check it's the correct part for your engine.
Muchas gracias señor , muy amable por contestar rápido , saludos
У меня не ожил ерг
it's going to cost me 1500 for the egr issue, I'm not the brightest with cars am I being ripped off?
That sounds very expensive !
Не става тоолкова лесно