Can it be FIXED? Half a Bearing! Hacked to Pieces!
Вставка
- Опубліковано 26 сер 2023
- Bent Frame Bolts! Easy Job Escalated! Ford Transit 3.7 • Bent Frame Bolts! Easy...
Support the Channel with a Like and Subscribe!
Become a Channel Member or visit Patreon at / rainmanraysrepairs
Visit our Second Channel on UA-cam, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
Located in Florida? Need work done?? Visit www.RainmanRaysRepairs.com
Check out my Merchandise shop for Men's and Women's Apparel, MUGS and Stickers! rainmanraysrepairs.myspreadsh...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
1: Astro Tools 52SL 500x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light, & 52SLC 500x2 Lumen Folding Double-Sided LED Slim Light W/Wireless Charging Pad amzn.to/3Jd2h6t
2: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
3: NOCO E404 12.25 Oz Battery Terminal Cleaner Spray and Corrosion Cleaner with Acid Detector amzn.to/3ILbdjv
My Camera Gear:
Gopro Hero 10 amzn.to/3AaxELe
Hero 9&10 Dual Battery Charger MUST HAVE! amzn.to/3g5KdAT
Flexible Camera Mount amzn.to/3Jywrk5
#brakecleanmafia #wifeunit #rainman #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to - Авто та транспорт
Like a good neighbor Rayman is there!!
extra $ for him, needs car for work Monday.
Hi Ray, On some jobs when using the old race to press in the new one it can jam and cause trouble getting it back out. We cut the old race with the angle grinder right through so effectively making it a little less rigid in diameter and so it will tap out easy where normally it might jam tight again. This doesn't hurt using it to press the new one in as the stiffness of the old race maintains it's shape but it sure comes out easier. I am in the UK and am a retired mechanic.
I have ground down the 'old' item on the grinder so that it slips easily. Then used to press the new outer race. I KEEP that old race for future use as I have done for my Trailer Wheel Bearings.
I was going to say that. Same here in the US.
The other trick is to put the new race in the freezer and get it as cold as possible. At the same time, warm the other part, With any luck the new race will just fall right in.
Ditto.
As the official bearing aficionado of this channel. He is replacing what is called a Hub 1 bearing. The darker side is a magnetic seal that the wheel speed sensor reads. The other side is a regular seal. Just in case you didn't know.
Misc suggestion.
I changed my hydraulic press to add wheels like you did, but i also added in a wooden platform across the bottom. Now i have a place to store all the accessories you need for the press, plus i can store heavy things i do not use often. Super convenient when you are space limited and your press tools and widgets are right at hand when you need them.
RAY IS THE MAN WITH THE PLAN. BE SAFE AND GREAT JOB.
The non plan, plan
Run a bead of weld around the inside of the old bearing. As it cools, it will shrink and literally fall out.
The now shrunk bearing can be used to press in the new one.
This is the go-to reply. This is the only method that will reliably 100% of the time drop that race out of that hub. I learned this as an apprentice in the shipyard back in the early 80s.
Wish I knew this trick couple years back I had a ford focus these bearings are a nightmare same deal I did it the same Ray did. He didn't get to take off the inner race though I cut them at an angle with a cutoff wheel then bust it on the cut because you can't cut it all the way you will cut into the hub. I will never buy another car with these type bearings they are always going bad. aftermarket bearing are a joke on you they are ball bearings instead of needle bearing like oem.
Hope Ray sees this cause it will save him a load of work on any internal bearing.
Have always removed bearings this way, as well as exhaust valve seats on large diesel cylinder heads, works every time.
Wish my Supervisor would see the value in a small shop press like that.... Nicely done Ray👊
I waited until now to have my second cup of coffee.
Just goes better with Ray’s video.
I have gotten my daily R.R.R. fix. I may proceed with my day.
Fyi... If you have a truck ball joint removal kit... Use the rings from that kit as your base shim to press into or press the new parts in... OR... Go to your local hardware store and get a set of different size black pipe couplings up to 6" dia meters... ALSO... Wack the piece with a hammer when you have all the pressure from the press on the part... The vibration will make sure the part is seated and that is not "window locked" or "stuck" on some rust or metal blurbs...
Happy Sunday Ray. Another great video.
I don't know why, but everytime I have a project coming up, you release videos that help me immensely with my research. I've been dreading a front end suspension rebuild on my Honda Accord, but right after I ordered my parts, you dropped all this front end rebuild material with the mustangs and this one! Not exactly the car I'm working on, but concepts are the same, and you've helped me not feel so out of my league. Through my daily dose of Ray, I havent even had to do much actual searching for helpful info. Thank you for having the BEST timing for my education needs!
@@xbahamutzero thanks for the tip. Luckily, it's a 1995, but the only things that I'm not replacing are the spindles and shocks. The SO managed to snap or bend almost everything else by spinning out and slamming into a snow bank right after our first snow last winter.
I have that exact press. Works great and takes up little room. Always pressing stuff out on my Cherokee XJ…thank for the video Ray!☀️
I do believe I might be right that this is Ray's first delivery after the repair.
Thank you to whom ever gifted me the sub to the channel, I have been watching Ray for a couple years now and enjoy the work, as a tech of over 30 years myself I see alot of what I would do in them and I also laugh at the mistakes and yes i yell at me screen when he misses something, lol
That's a great point to emphasize how important that axle nut is, even in newer style bearings that come together with the hub. People get a false sense of security when they bolt an inclusive unit on, not understanding how easily the bearing itself can break apart. The snap ring holds the outer race in place, and corrosion holds the hub inside the inner race. The weakness is in the sheet metal cage that holds the inner bits together with the outer. The only thing keeping that inner race, hub, and wheel in place after the sheet metal fails is the axle nut.
NO CHARGE ALSO.
And like a good neighbor, Rainman is there!
Well now I was imPRESSED with this video.
Thanks Ray, you solved quickly such a pressing matter.
Hey Ray! You should weld a flat tip screw driver in an 11 o'clock position to the pressure relief bolt in the closed position on your press. It would give you a grab handle to open and closed the valve and put the wrench away.
Thanks for the surprise video. You usually post in your morning which is my evening, I was pleasantly surprised to see a new video this morning. Hoping there will also be a new one at the usual time this evening.
I'm glad you got the press back
You can also put the parts in the freezer or dry ice to make everything go together easier.
Yes,Sunday bonus video 🎉
Another outstanding video Ray your the best at what you do but the most important thing is to have your self a great day Ray
if you dont have a press but you have welder you can clean the grease of the bearing race run two beads of weld around the raised part in the center of race, one on either side and they just about fall out
If you don't have a press but you have a welder, you can make a press
@@waldolemmerbottle jack and some box-sections with a couple strong springs, jobs a good'en
Just what I was thinking I have seen to meny bearing carriers broken with the press
You could have also taken the welder and laid a bead on the old race and it should shrink enough that it could just be tapped out.
Exactly what I was going to say. Life hacks. :)
I’ve done a few never thought of this like a solid line?
There are some jobs the right tool and know how make easy. WELL DONE
Pays dividends to help your neighbor and we enjoyed the video also. Thanks . Your shop is looking great!
Ray needs to get a two-sided honing stone to remove those high spots. They are about 1x 2×6 inch long, one coarse side and one fine side.
If you grind a little off the outer race of the old bearing, they won't get stuck when pressing in new bearings.
Awesome to see the business has a 5 star rating ⭐️ keep up the excellent work ray your killin it 💪🏻
(New Channel Member) Thank You to Whomever Gifted Channel Memberships !
Ray is one Heck of a Mechanic & Answered quite a few questions I've had on Newer Vehicles thru His Videos !!
I can get Anything with a Carb & Points to Run But the newer stuff with computers i'm lost..
So Thank You Ray & The Member that Gifted Memberships,
Live Free Or Die, From PEW HAMPSHIRE !!!
I love the sound that press makes when released 😂😂
Great stuff Ray, they should have called you first and not hammer timed it!
Eh, sometimes you have to at least try to move your learning journey forward.
The key is in the humility to know when you've exceeded your skills and/or tools and can ask for help.
that’s an excuse to get more tools i think
Easy peasy press work is always nice Ray I had to press in bushing on lower control arms for a 2005 chevy 2500Hd With the 6.6L duramax last week froze the bushings and some Red bearing grease they went in but with a fight. So easy press work is always great @Rainman Ray's Repairs
Ray awesome job have a great day
Another pressing engagement successfully carried out by Ray.😁
👍🇺🇸😎
I like to weld a bead around the inside of the race. When the weld cools it shrinks the race a tiny bit and make removal significantly easier.
you are a good neighbor Ray, good job...
I hope you will be safe with the hurricane going over Florida
A nice, short video. Hope the storm doesn't hit your area. At lease you a prepared with the upgrades to the Dirtymax.
Nice simple job Ray. Probably done at 50 of these. Sometime they don't want to come apart!
Putting things right for a neighbour and that’s why we love you Rainman!👍🙂
I went to a scrap yard and picked up various diameters of black pipe for these jobs, much easier and equalizes the pressures,, ten to fifteen inches long, had to machine a couple to size, stack them inside of each other, for storage.
Great job Ray.
Ray. Good luck on that hurricane coming your Way!!! Hope you're prepared.
he seems to be very prepared and contently evolving his preparedness
Great job!!
I feel for ya brother. I've been to Tampa myself, pretty much the same. Hang tough!
Great job 👏
Good Day Ray
I was not disappointed.!! The flying circlip made my day.!!!
nice that they engraved it for the sensor side, even nicer you put it in right the 1st time ;)
Always try to use the least amount of spacers when pressing a bearing in or out. Get them set wrong and they will slip out, sometimes at great velocity across the shop!
Nothing like door to door service. And knowing Ray, he just did a favor for a next door neighbor and didn’t ask for payment.
The engineering tolerances needed to make parts that mate like that is mind blowing, but there you are in a garage with a leaky press do de do no problem.
Hey Ray - doesn’t the Jack handle for your hydraulic press have a provision (squeezed down on end) to open and close the valve so you don’t have to keep grabbing the pliers?
howdy howdy from Tucson
Another great video!!! Thanks ray
Of course I enjoyed the content and I will look forward to seeing you on Monday morning
Yes I enjoyed the video. Another great job dude.
I'm glad you are doing it again. I missed it the first time.
have a great day
Ya know, if you've lost the original jack handle with the relief valve slot, you could just slot the handle you do have.
My buddy's shop he has a short T-tube made for it- turn to the left or right.
Cut that slot on BOTH ends! When I have 50/50 chance, 90% of the time I'm wrong!! 😱
i enjoy the content. I put a set of handles on a couple of old strut rods for my press, easy to grab & move for height
Any length video from you is a good video, Ray. Be well and feel better soon.
Great video
You have an amazing collection of tools.
"Where does he get such wonderful toys?" -- Jack Nicholson, "Batman," 1989😁
The most effective way of removing the inner race is to apply a solid arc weld around the inner circumference.
Thanks for the last explanation. I was wondering how that was going to stay together.
its nice and shine now
Welcoming back!
Fantatic Ray !!!
At least this customer admitted they were the ones to ding stuff up, instead of the mysterious "Another Shop".
Good morning Ray
LOL at "Hazard Fraught". I have shopped there many times, but I still refer to them as "Hazard Fraught Tools".
Ok, your in my head again. I just ordered new front hubs for my Trans Am this morning.
All good ❤
I’m repacking hub and bearings while I’m replacing tie rods and ball joints on my ‘95 302 f150. I stupidly punctured not one but TWO! Moog upper ball joint dust boots. Currently waiting on new dust boots. 🙃
210th! GOOD SUNDAY EVENING RAY AND THE WIFE UNIT! And happy Sunday to the two new employees! Roger in Pierre South Dakota
Another excellent Video... trying to find the same articulated puller you used a few videos back, I need the same one
Excellent addition to the press. Ray cut a notch in the jack handle so it fits the open/close value.
I have that same press on the end of your handle it has a notch to operate the valve to open and close it if not a quick grinder across the end will make the perfect notch.
Appreciate all your videos always great info
I don’t have the notched handle, I need to cut the one that I have to fit the valve
P.S. I'm not saying you don't know what you're doing I think you're an very outstanding mechanic. Keep up the great videos.
I would have thought you would have cleaned out the slot for the snap ring before pressing in the bearing, not to mention the ring itself. Pretty sketchy operation all told.
Last wheel bearing change I did I got bearing/spindle pre assembled with new parts price point was just a little higher but labor cost and reliability made it a WIN!
My little Peugeot has the same bearing and magnetic ring set up, though thankfully you can just about get a spacer to hook up on the outer race if it does fall apart. The only issue is the part is an odd shape and doesn’t lie flat, thanks Peugeot PSA for that design.
Loved it😂
Great timing on getting the 2nd alternator on the dirty max. I hope the hurricane in the gulf misses you.
Enjoy your video thank u
😅great job Ray
BTW you went in dry... inside joke...
🇦🇺private job as well
Nice to have the right tools
You are good!!!👍🏼👍🏼👍🏼👍🏼👍🏼
And good day too you.
Hello Ray, it looks like there is a hurricane headed your way mid to late this week. It looks like it may slightly to your north and come in closer to Tampa and going thru Jacksonville, with you just getting a bit less wind and rain. the beaches may get a bit rough, but the surfers will like it. I couldn't send this in chat, maybe it was to many letters.
Just checked NHC.NOAA and it looks like it will curve away north and then north east.
@@pprey6599 It very well could, however it is a hurricane, and it could hit 100 miles west or 1 mile away, it is still to early to be very definitive.
Ok adding wheels to my press asap.
The air chisel should always be your first choice when working with mirrored finished surfaces.
If I were still working I'd be putting wheels on the shop press first thing. I was always bothered by that small pressure release on the bottle jack. I took it out and welded a larger tee handle on it. No need to search for pliers anymore.
I've used a welder to get the race out when I didn't have a press.
Yup