Best video ever with the perfect title. Had this issue today, searched on Google and got to this video. Just fixed the refrigerator myself. Thank you so much for making and uploading this video!
Thanks man. Same sound my fridge was making...but my relay was not rattling and I used a multimeter to test it. Had extremely high reading. Got a new one and voiler we were back in business.
You are the Man. I was ready to scrap my 15 years old KitchenAid side by side fridge which I have in the garage, but I was thinking give it last shot and I changed relay which you're showing on the video. It did not clicked- it was dead with brawn burned spat on the bottom. Replaced and the fridge is working again ! Thank you
Had 12 amps for 5 to 10 seconds then out. I thought was a locked compressor, even though the lock out rating on it was 14.1. After testing with a new relay it now running at 1.2 which is optimal health! The Samurai Repairman Rocks!!!
Thanks! Your advice rocks! With it I fixed my frig saving me $$$$. All I need to do was to download the manual to learn how to remove the cover from the side of the compressor. My frig is back in business! That relay rattled just as you indicated.
Exact same issue with my Whirlpool fridge, unplugging the unit for 5 minutes would get the compressor started and running/cooling, then the very next cycle back to humming and click. Swapped out the starter relay, but that was only a temporary fix. Replaced the relay with a Supco 3 in 1 hard start kit and no issues so far, compressor runs normally all day long.
Another good vid. Thanks for taking the time to share. I refer you to my customers while they wait for me to show up. I like it when they hover over my shoulder to admire all my tools and techniques :)
It's very much like a performance. Not in the sense that it's fake in any way, but that you are creating and managing the customer's perception of you as a professional appliance repair technician.
Fingers crossed but compressor just started after I changed the relay for a UCPO. Cold air is getting out of the fridge, looking good!!! A MILLION THANKS!
@@jaygoss6632 Purchased mine on Amazon. If I remember correctly it was a matter of finding the model number of the compressor (Huayi B25H5 in my case) and Googling " starter relay". I found a relay that looked just like mine after some digging and go THAT model / part # and then found it on Amazon along with some pictures in the reviews of the relay sitting next to a compressor with the same model number printed on its side. Good luck! IIRC the "pin" count and location is the key thing you want to confirm before purchasing. Almost bought a 2-pin relay before realizing mine had only 1.
I believe this is the same thing that’s wrong with mine, it starts and stops.. I’m going to fix, I’ll keep in touch and let you know how it went.. thanks a bunch.. 7/25/2022. Kenmore refrigerator 😀
like the way you explain i was serching all vid but yours was the best because i have the same problem and the expilation i found here thanks a lot my friend
I have did all what you have showed in the video, but compressor start and stop after few minutes even after i installed new ptc relay. What you recommend me to do next. I loved your explanation. Thanh you in advance for your reponse
This is an interesting video Samurai, taught me alot i was just reading about this but reading alone wasn't enough for me to understand and as i saw this vid it helped to explain what i didn't understand from reading The current draw you got in the end is 1.61 amps.... do most fridge compressors draw about that amount?
Hi!, im a newbie in this all electronics things, my fridge making the clicking sound and the compressor gets hot, i think im having the same problem with in the video, my question is this relay thing is there something i should know how much power it can run or anything, or i should just go to hardware and ask for relay, thanks in advance
The PTC start device ("relay") and the overload should be sized for the compressor. Generally, they break out by horsepower group, 1/4 hp, 1/3 hp, etc. You can get the OEM replacement at an online parts store like Repairlinic or Appliancepartspros (two of my faves) by searching with your model number at their site.
Sir, i want to ask what is the reason: a 110 watt compressor runs ok in around 70 watts, ..low side stays in vacuum around 25 and high side around 200 psi.the pressure on high and low sides does not equalize if i turn off the compressor..
how do you know which one to buy by hp? I bought one 1/6 but one of the connection doesnt fit its wider. Mine didnt rattle but compressor or the relay clicks🤷♀️
I am replacing the relay and overload on my Kenmore 596.58642890. We have them put on the compressor ( which we checked by Ohms and it looks good) cannot figure out the wiring. We are going from using 4 wires down to 3 and cann't get it to work. It does not have a capcitator that we could find. How do you know which wires go where. I have a white, blue, and a black split in 2? Any help would be appreciated.
hi guys can you helpme please. i have refrigerator which is not cooling in the compartmen (down side) but in the freezer(up side) is good. what is the posible cause? any idea please
On most modern home refrigerators, current draws much over 2 amps is a sign that the compressor has been damaged. The extra current draw will create excessive heat. This heat will compound the problem and cause early failure. I like to see current draws well under 2 amps.
My refrigerator cooling, the stuff in the freezer has defrosted. I checked the relay and it's not making the rattling sound and it's making the same noises that you have on hte video. I still replaced it and it's making a clicking sound like the compressor is trying to work.. Help I don't know what else to check
Would the compressor get hot in this situation? I do hear that clicking sound, but the compressor is (very?) hot. The question mark is because I don't know what is normal in this case. It feels hot to the touch. I have a Samsung RSJ1KEPS
OK, thanks! That's exactly how it feels. So I took down the part and will try to replace it. Unfortunately, it seems it is not available anymore. Hopefully I will find some equivalent...
Well, no joy. I got a new relay (quite expensive, but well...) and the compressor still won't start. Funny thing is this new relay rattles straight out of the package, quite badly... But I measured it's resistance and it goes to 36 Ohm. I understand it should sit between 10 and 50 Ohm, so it looks fine (I measured also the old relay and it also looks fine, so I guess that may also have been OK). Also, if I hold down its terminals, it doesn't rattle so bad anymore, so I'm guessing it's just something about its construction. The compressor also measures fine electrically, with 33 Ohm, 19 Ohm and 14 Ohm between the terminals. Could it be that capacitor next to the PTC relay? Or am I looking at a mechanically failed compressor?
i need help , my compressor run and the refregirator cool great but while its running it makes a click sound ( lower the noise of the compressor ) then goes back to the normal noise its like 3-5 minutes cycle rq : the cooling works great but im worried rq : i have cleaned the coils and the fan from dust stil the same thing . Please HELP
@@AppliantologyOrg hi , thanks for your answer , its no longer cooling now haha . i've checked the fan , it works when i press the light botton switch there is air but not cool air . i guess its from the relay .
Hi! I've got this fridge that won´t start. It´s relay isn´t rattling and the tests on the compressors prongs are reading 10, 6 and 4 amps. Any thing else that I could do before I buy a new compressor?
Philip Gulde Brandao We can help you troubleshoot this at the Appliantology repair forums. Start a new topic in the Kitchen forum there. This page will get you started: appliantology.org/topic/51337-getting-started-at-appliantology/
I had the same issue. For me it was the thermal protection on the compressor. The coils were dirty towards the front of my SxS fridge. It was like a carpet and was blocking airflow. I unplugged the fridge for three hours. Cleaned coils and fan. It fired up right away and the heat was venting towards the front on the fridge vent normally. I also changed the start relay/overload combo but it didn't help I initially because it was a thermal issue
Hello Sir, My compressor turns on, stays on for about 5 seconds then cuts off, over and over and over. I replaced that relay, hoping to solve the issue and the problem still occurs. I've read that maybe the thermostat could be bad? What would you recommend next? I'm really hoping that the compressor is not bad...Thank you
Good job recording the noise the fridge made and getting right to the point not rambling on and on like other DIY videos 👍
Exactly I hate that!
Best video ever with the perfect title. Had this issue today, searched on Google and got to this video. Just fixed the refrigerator myself. Thank you so much for making and uploading this video!
Thanks man. Same sound my fridge was making...but my relay was not rattling and I used a multimeter to test it. Had extremely high reading. Got a new one and voiler we were back in business.
Glad it helped!
You are the Man. I was ready to scrap my 15 years old KitchenAid side by side fridge which I have in the garage, but I was thinking give it last shot and I changed relay which you're showing on the video. It did not clicked- it was dead with brawn burned spat on the bottom. Replaced and the fridge is working again ! Thank you
Where did you get the relay from/how do you know which to get please?
Had 12 amps for 5 to 10 seconds then out. I thought was a locked compressor, even though the lock out rating on it was 14.1. After testing with a new relay it now running at 1.2 which is optimal health! The Samurai Repairman Rocks!!!
Nice job, Richard!
great video... usually compressors last along time. we have hotpoint/ge fridges at my work and these are usually the problem when i get a call.
THANK YOU !!!!! $31 fix rather than the $300 the repair guy said diagnosing it over the phone. I canceled the house call scheduled for tomorrow.
Thanks! Your advice rocks! With it I fixed my frig saving me $$$$. All I need to do was to download the manual to learn how to remove the cover from the side of the compressor. My frig is back in business! That relay rattled just as you indicated.
Where did you get the relay from/how do you know which to get please?
Exact same issue with my Whirlpool fridge, unplugging the unit for 5 minutes would get the compressor started and running/cooling, then the very next cycle back to humming and click. Swapped out the starter relay, but that was only a temporary fix. Replaced the relay with a Supco 3 in 1 hard start kit and no issues so far, compressor runs normally all day long.
Another good vid. Thanks for taking the time to share. I refer you to my customers while they wait for me to show up. I like it when they hover over my shoulder to admire all my tools and techniques :)
It's very much like a performance. Not in the sense that it's fake in any way, but that you are creating and managing the customer's perception of you as a professional appliance repair technician.
Nice job Samurai. Thanks for the diagnosing tips!
Thanks for watching, Brad!
Fingers crossed but compressor just started after I changed the relay for a UCPO. Cold air is getting out of the fridge, looking good!!! A MILLION THANKS!
Just wanted to come back and give this a thumbs up and leave comment. Saved me having to buy a new freezer. Instead, $4 part! So, thank you!
Thank you for this video! I fixed my mini fridge by replacing the starter relay. $10 later and boom! Cold air's back! Much appreciated
Where did you get the relay from/how do you know which to get please?
@@jaygoss6632 Purchased mine on Amazon. If I remember correctly it was a matter of finding the model number of the compressor (Huayi B25H5 in my case) and Googling " starter relay". I found a relay that looked just like mine after some digging and go THAT model / part # and then found it on Amazon along with some pictures in the reviews of the relay sitting next to a compressor with the same model number printed on its side. Good luck! IIRC the "pin" count and location is the key thing you want to confirm before purchasing. Almost bought a 2-pin relay before realizing mine had only 1.
I believe this is the same thing that’s wrong with mine, it starts and stops.. I’m going to fix, I’ll keep in touch and let you know how it went.. thanks a bunch.. 7/25/2022. Kenmore refrigerator 😀
like the way you explain i was serching all vid but yours was the best because i have the same problem and the expilation i found here thanks a lot my friend
I have did all what you have showed in the video, but compressor start and stop after few minutes even after i installed new ptc relay. What you recommend me to do next. I loved your explanation. Thanh you in advance for your reponse
Test the control board using your multi meter
Perfect video. Saved me lots of $$$. Thank you!
This is an interesting video Samurai, taught me alot i was just reading about this but reading alone wasn't enough for me to understand and as i saw this vid it helped to explain what i didn't understand from reading
The current draw you got in the end is 1.61 amps.... do most fridge compressors draw about that amount?
Can I take the amperage from the compressor with normal multimeter? Not one with the hoop?
Where do you get the new relay switches
Thank you! you're the man!!! it rattled alright!
Where did you get the relay from/how do you know which to get please?
What does it mean when one of the terminals on the compressor starks after a new relay is installed? Thank you
I'm samuria tech ...How much should a good compressor draw current and how much bad compressor draw current
My compressor is doing this hum-click but both the start relay and capacitor are testing as working. Only other thing could be bad compressor?
Hi!, im a newbie in this all electronics things, my fridge making the clicking sound and the compressor gets hot, i think im having the same problem with in the video, my question is this relay thing is there something i should know how much power it can run or anything, or i should just go to hardware and ask for relay, thanks in advance
..should have shown the wiring on the two discreet components for us hesitant, thanks.
Does the relay have to be specifically for the fridge freezer? Where to get it from? Online?
The PTC start device ("relay") and the overload should be sized for the compressor. Generally, they break out by horsepower group, 1/4 hp, 1/3 hp, etc. You can get the OEM replacement at an online parts store like Repairlinic or Appliancepartspros (two of my faves) by searching with your model number at their site.
Good job
Is there a video or manual showing how the discrete components go together?
Sir, i want to ask what is the reason: a 110 watt compressor runs ok in around 70 watts, ..low side stays in vacuum around 25 and high side around 200 psi.the pressure on high and low sides does not equalize if i turn off the compressor..
Does the black dilly that hooks onto this white part usually stay good??
Damn, just pd $160 for exact repair... Part was $11.99 easy peeze... Astros are World Series Champions!!!
Where did you get the relay from/how do you know which to get please?
Thanks a lot!
how do you know which one to buy by hp? I bought one 1/6 but one of the connection doesnt fit its wider. Mine didnt rattle but compressor or the relay clicks🤷♀️
Can compressor work without changing to new relay? I want to use use it just as vacuum pump.
good to know i just noticed my frodge making this sound too😀
I am replacing the relay and overload on my Kenmore 596.58642890. We have them put on the compressor ( which we checked by Ohms and it looks good) cannot figure out the wiring. We are going from using 4 wires down to 3 and cann't get it to work. It does not have a capcitator that we could find. How do you know which wires go where. I have a white, blue, and a black split in 2? Any help would be appreciated.
Very nice
hi guys can you helpme please. i have refrigerator which is not cooling in the compartmen (down side) but in the freezer(up side) is good. what is the posible cause? any idea please
What is your rule of thumb to know when the amp draw of the compressor is indicating an imminent failure ?
On most modern home refrigerators, current draws much over 2 amps is a sign that the compressor has been damaged. The extra current draw will create excessive heat. This heat will compound the problem and cause early failure. I like to see current draws well under 2 amps.
@@AppliantologyOrg you mean if current draw over 2 amps it's mean the compressor is bad and if draw under 2 it's mean good?
Samurai, did you ever make a video showing the compressor test rig you came up with? I am interesting in this. Please let me know.
My refrigerator cooling, the stuff in the freezer has defrosted. I checked the relay and it's not making the rattling sound and it's making the same noises that you have on hte video. I still replaced it and it's making a clicking sound like the compressor is trying to work.. Help I don't know what else to check
thanks
Hi, my name is Mike from Kenya. my Samsung refrigerator is powering on but won't start the compressor and it wont cool. what might be the problem?
Would the compressor get hot in this situation? I do hear that clicking sound, but the compressor is (very?) hot. The question mark is because I don't know what is normal in this case. It feels hot to the touch. I have a Samsung RSJ1KEPS
Yes, the compressor would be hotter than normal running temps. Typically too hot to comfortably touch.
OK, thanks! That's exactly how it feels. So I took down the part and will try to replace it. Unfortunately, it seems it is not available anymore. Hopefully I will find some equivalent...
Well, no joy. I got a new relay (quite expensive, but well...) and the compressor still won't start.
Funny thing is this new relay rattles straight out of the package, quite badly... But I measured it's resistance and it goes to 36 Ohm. I understand it should sit between 10 and 50 Ohm, so it looks fine (I measured also the old relay and it also looks fine, so I guess that may also have been OK). Also, if I hold down its terminals, it doesn't rattle so bad anymore, so I'm guessing it's just something about its construction.
The compressor also measures fine electrically, with 33 Ohm, 19 Ohm and 14 Ohm between the terminals. Could it be that capacitor next to the PTC relay? Or am I looking at a mechanically failed compressor?
i need help , my compressor run and the refregirator cool great but while its running it makes a click sound ( lower the noise of the compressor ) then goes back to the normal noise its like 3-5 minutes cycle
rq : the cooling works great but im worried
rq : i have cleaned the coils and the fan from dust stil the same thing .
Please HELP
Evaporator fan may be making that noise.
@@AppliantologyOrg hi , thanks for your answer , its no longer cooling now haha . i've checked the fan , it works when i press the light botton switch there is air but not cool air . i guess its from the relay .
Hi! I've got this fridge that won´t start. It´s relay isn´t rattling and the tests on the compressors prongs are reading 10, 6 and 4 amps. Any thing else that I could do before I buy a new compressor?
Philip Gulde Brandao We can help you troubleshoot this at the Appliantology repair forums. Start a new topic in the Kitchen forum there. This page will get you started: appliantology.org/topic/51337-getting-started-at-appliantology/
I had the same issue. For me it was the thermal protection on the compressor. The coils were dirty towards the front of my SxS fridge. It was like a carpet and was blocking airflow. I unplugged the fridge for three hours. Cleaned coils and fan. It fired up right away and the heat was venting towards the front on the fridge vent normally. I also changed the start relay/overload combo but it didn't help I initially because it was a thermal issue
My fridge make a sound, and when I replace the relay with 3in1 kit, the fan next to it stops. What a head ache to deal with. Any thoughts or ideas?
Is the sound a continuous clicking sound?
Hello Sir,
My compressor turns on, stays on for about 5 seconds then cuts off, over and over and over. I replaced that relay, hoping to solve the issue and the problem still occurs. I've read that maybe the thermostat could be bad? What would you recommend next? I'm really hoping that the compressor is not bad...Thank you
Got the same problem. What did you find?
I’d like to know the solution also
How do you remove the starter? do I just pull it off?
Subscribed!!!
If the Relay doesn't rattle when shaking, can someone tell me how to test it to see if its still broke even if it doesn't rattle?
Mine rattled a bit so I’m gonna switch it out and see if I can save my sisters fridge.
whirlpool refrigerator
Oops 7/24/2022😀