What's the first thing we do once we get our Rgb lights hooked up ? ... We drive right to a gas station where Sherrif is waiting... (Priceless) ... Anyway awesome video , awesome lights on an awesome car .. 👍
I drive with red halo daytime lights 24/7 have crossed numerous cops (thousands) and have never been questioned one bit and as you know red lights are "reserved" for emergency vehicles only but cops don't gaf
@@CamaroMac okay I'll watch that one again. I figured since you did these after those that you just ran with what you set up on the other set. Thanks man!
For the under glow, you can reach out to them on Facebook and Instagram. Glowe industries. And these are for all cars. And yes this kit should work for the trans am as well.
@@ariyanadumon4549 Glowe Industries on Facebook or Instagram. Also have a lot of material on both. If you reach out directly I can make sure everything fits & give you a sweet discount.
@@GloweIndustries I appreciate that mate, I gotta get the base wiring done and then I'll be hitting you guys up. I saved your info. Those look beautiful.
When I got mine, the high and low beams were pined backward. I depinned the connectors and repinned them to get them to work. With LEDs polarity matters, so if the power and ground pins are backwards it won't light up.
Just installed these today. Cant get the high beam or low beam lights to come on. Just the halo. What am I doing wrong. Previous lights worked perfectly so I know it's not the wiring
So I think it has to do with the plug and what does what, mine is all set on the high beam side, try in plugging the low beam headlights(outer ones) and turn on night beam, and vis versa
Did you use the app located on the paperwork it came with? Scan the QR code, when I did mine there where issues but the seller fixed that. That is assuming you the issue is with only the phone connection. If you can’t get the lights to turn on at all then reference my install video in description
Are they supposed to power on as soon as you make a 12v connection? Because if so they don't the headlight portion is fine the work it's the rgb lights that do not come on??
I’m not very knowledgeable when it comes to the electrical system. So I need to know where to connect the wires to supply power to the control box. (Without a switch)
I have under glow with power and grounds on all corners of the car, so I tapped into one of them. And then used the existing switch for the under glow to turn it on with it.
So that is kinda tough, so I would find a power source in the fuse panel that provides power when you turn the key on. Run a wire from there. I am sure there are plenty of videos on UA-cam to show you how to run power.
These don't have the 2 wires coming out of the headlight assembly like the other ones you had. So do the halos work when they are all connected? Also do they all work together.... like if you have low beams on all 4 are on low beam? Thanks for your videos!
Ok I watched the install of other halos, this one, and the comparison. I like the functionality of being able to hook up drl's and having the light blink with the turn signal but unfortunately I bought these RGB ones. So I'm researching how to wire them up on an 85 g body.
so what's the deal with the popo talking to you? are the lights you were using not legal? are these legal? also, can i buy the old ones if you still have them?
I'm buying those real soon for my 86 SS monte Carlo
Ima buy them next week
I have a 86 Monte Carlo I was going to put them on how are they holding up for you?
Where did you connect the control box red and black wire to ?
I’m wondering that too…did you figure it out?
I need some for my monte Carlo SS
What's the first thing we do once we get our Rgb lights hooked up ? ... We drive right to a gas station where Sherrif is waiting... (Priceless) ... Anyway awesome video , awesome lights on an awesome car .. 👍
Always my luck lol
I drive with red halo daytime lights 24/7 have crossed numerous cops (thousands) and have never been questioned one bit and as you know red lights are "reserved" for emergency vehicles only but cops don't gaf
it would be even cooler if they made park lights that change colors as well
Where did you run the small power and ground wire from the control box?
Did you ever find out?
His ground went to the body and his power went to the switch that controlled the lights under the car
My running lights and everything work but how do I make the halos turn on with turn signal?
I just got these and I’m going to install them later today would I be able to connect the power and ground to my battery ?
Yes. It it should have a fuse though
How would I use the fuse I’m not to good with wiring
@@joraybeast2460 I don’t have a good video on it, I would suggest looking up video on installing a switch
They have brown?
How do you connect all 4 of these to all run low or all run hi beam like you have set up?
On my other video where I installed the non rgb set I review that, basically I am pulling power from one side so both run
@@CamaroMac okay I'll watch that one again. I figured since you did these after those that you just ran with what you set up on the other set. Thanks man!
I love your underglow dude. Where did you nail a kit for a Third Gen? Do the guys who made your lights make them for Trans Ams?
For the under glow, you can reach out to them on Facebook and Instagram. Glowe industries. And these are for all cars. And yes this kit should work for the trans am as well.
@@CamaroMac fantastic, thanks mate.
@@ariyanadumon4549 Glowe Industries on Facebook or Instagram. Also have a lot of material on both. If you reach out directly I can make sure everything fits & give you a sweet discount.
@@GloweIndustries I appreciate that mate, I gotta get the base wiring done and then I'll be hitting you guys up. I saved your info. Those look beautiful.
When I installed mine the low beams didn’t work and only one led light turned on with the high beams on any tips on what I could’ve done wrong?
When I got mine, the high and low beams were pined backward. I depinned the connectors and repinned them to get them to work. With LEDs polarity matters, so if the power and ground pins are backwards it won't light up.
So u ran the fuses bc u put a switch on it? So if u don't add switch u think it will be ok to run
You always want a fuse when giving something power in case of overload, this will help prevent electrical fires
anyone else notice the cutters on the shock tower?? when pulling up to the gas pump. lol
Lol
🔥🚒🔥
did you run a fuse between the battery and the box? if so what amp fuse was it?
How's it lasting bro? I just bought these for my 92 Z28.
Bro you showed everything expect for where you plug in the black and red wire
Same thing I was thinking
Can you help me wire these to be blinkers and my running lights
Just installed these today. Cant get the high beam or low beam lights to come on. Just the halo. What am I doing wrong. Previous lights worked perfectly so I know it's not the wiring
So I think it has to do with the plug and what does what, mine is all set on the high beam side, try in plugging the low beam headlights(outer ones) and turn on night beam, and vis versa
If you watch my other video I do a lot of wiring on mine, but it might be a simple pin over you can make, keep me updated or reach out via Instagram
What app do u use for the lights
So do you have to use the adapters that comes with it?
No you do not :) I over did it lol
Thanks 👍
After a year any issue with them
Nope, still work great, I do keep car in garage and have not seen any issues this yellowing or anything
@@CamaroMac thanks for the reply I’m about to order a set My car it garage kept also
What is the amperage you have your under lights on
I cant seem to get mine to light up at all? Even when I add power the app says I'm connected but nothing works and my phone want pair with it?
Did you use the app located on the paperwork it came with? Scan the QR code, when I did mine there where issues but the seller fixed that. That is assuming you the issue is with only the phone connection. If you can’t get the lights to turn on at all then reference my install video in description
Are they supposed to power on as soon as you make a 12v connection? Because if so they don't the headlight portion is fine the work it's the rgb lights that do not come on??
@@kevmoney265 they get turned on in app if you have 12v to them
@@CamaroMac i scan the code on the black box I can’t get the lights to change colors
Mine didn't work 😔 only the halo portion did.. high and low beams...don't exist
Please see my other video on the install of the other headlights
I can't find it.
@@darbylheureux7735 ua-cam.com/video/GDNofw5x1EU/v-deo.html
Where did you hook up the wires from the box?
I’m not very knowledgeable when it comes to the electrical system. So I need to know where to connect the wires to supply power to the control box. (Without a switch)
I have under glow with power and grounds on all corners of the car, so I tapped into one of them. And then used the existing switch for the under glow to turn it on with it.
So that is kinda tough, so I would find a power source in the fuse panel that provides power when you turn the key on. Run a wire from there. I am sure there are plenty of videos on UA-cam to show you how to run power.
Will these work for a 2001 Pontiac trans am
If they take the 4x6 light then it should fit, I would verify just in case , but from my experience those are standard and should fit.
I have the same set of headlights, but the halos won’t turn on. The car is a 1986 Camaro. Any ideas? High and low beams work just fine.
Halos are hooked up to my running lights with one of those 2 wires on the side of the main clip, my video will cover it
These don't have the 2 wires coming out of the headlight assembly like the other ones you had. So do the halos work when they are all connected? Also do they all work together.... like if you have low beams on all 4 are on low beam? Thanks for your videos!
@@justinfoy37 so I did a video comparing the 2 types of headlights if you want to check it out. The halos are controlled by the app
Ok I watched the install of other halos, this one, and the comparison. I like the functionality of being able to hook up drl's and having the light blink with the turn signal but unfortunately I bought these RGB ones. So I'm researching how to wire them up on an 85 g body.
so what's the deal with the popo talking to you? are the lights you were using not legal? are these legal?
also, can i buy the old ones if you still have them?
He was letting me know while driving and red, they are not legal. While parked, no issues at all.
@@CamaroMac ah, makes sense. thanks! so, wanna sell the old ones?
Did u install lights underneath the car? It's glowing....
Lol yes, there is another video for that
Hey I bought these but I can’t get the low beams to turn on I have to use the high beams and I’m new to wiring and all this stuff lol pls help
What year is your camaro
@@CamaroMac it is a 86
@@danielrey7464 can you send me a message on Instagram camaromac
Camaromac91
@@danielrey7464 camaromac91 that is
Nice job
How do you get them to work on low beams?
Please watch my other headlight video, we did some modifications
Can you put the link. I'm having the same problem. Thanks!!
How do you get the blinkers to work?
Did you ever figure it out?