Thank you Victor for the great video . I like it when you explain what tools to use and etc. No worries about the tools , I use Snapon , and cheap tools also. Now it's going to be easier to know what exactly to do , if I have to take the throttle body out of my 1995 SL320 . I am so happy that my car doesn't have the ASR option . The build date is 08/94 and titled as a 1995 . Thank you again for the great video .
hi Victor, this will be helpful i can feel it. too bad you didn't show what you did to the throttle body after you took it out. i press the gas pedal but no responds until i press it further. if you can tell what you did to the throttle body to get it working fine again it will be good. cheers
Hi Victor 1990 sl300 .throttle response poor it has too much slack on the 2piece connecting rod because cruise /electronic throttle doesn't actuate when accelerator pedal is pressed asr light on .trouble code rear speed sensor fault.throttle body replaced Rotational angle sensor replaced
Hi Victor, your videos are incredibly illuminating and a God-sent for me, my 95 SL320 was shifting improperly, key on, not running, clanging (broken clock sound) from under intake, come and goes. Found throttle body as noise source, will probably remove TB to inspect. Any thoughts sir ? thank you Edit (12/14/20) noisy rattle in TB has stopped, still idles smooth, Removed throttle body, cleaned throat, butterfly that was somewhat covered in gas residue. The trans has been shifting erratically only up to 3rd, no 4th or overdrive, presumably limp mode. Not sure if TB is the cause, thanks
@@garywillier4303 Old video. But after the throttle body was repaired the engine runs perfect, has full power, no smoke. PCV system could use some cleaning but the engine is fine.
Thank you Victor for the great video . I like it when you explain what tools to use and etc.
No worries about the tools , I use Snapon , and cheap tools also.
Now it's going to be easier to know what exactly to do , if I have to take the throttle body out of my 1995 SL320 .
I am so happy that my car doesn't have the ASR option . The build date is 08/94 and titled as a 1995 .
Thank you again for the great video .
Hey Victor - thanks for the great video - I was able to take the Throttle Body out of my 95 SL320 - great instructions!
thank you so much sir im the guy from cali .......... this guy took a great amount of time to explain to me so much. much respect thanks again
hi Victor, this will be helpful i can feel it. too bad you didn't show what you did to the throttle body after you took it out. i press the gas pedal but no responds until i press it further. if you can tell what you did to the throttle body to get it working fine again it will be good. cheers
Your awesome one ✋ magic your onehell of a mechanic watch to help friend fix his car thank you sir nc usa
thank you victor this was happining to my R129 sl same thing with you put sl R129 320 on this video
Hello,can I leave the throttle body and clean it while it’s on the car and the battery is disconnected?
M104 S320 1998
Excellent video Victor!!
Hi Victor 1990 sl300 .throttle response poor it has too much slack on the 2piece connecting rod because cruise /electronic throttle doesn't actuate when accelerator pedal is pressed asr light on .trouble code rear speed sensor fault.throttle body replaced Rotational angle sensor replaced
Where are you getting these coils from to fix that horrible screeching noise?
Hi Victor, your videos are incredibly illuminating and a God-sent for me, my 95 SL320 was shifting improperly, key on, not running, clanging (broken clock sound) from under intake, come and goes. Found throttle body as noise source, will probably remove TB to inspect. Any thoughts sir ? thank you Edit (12/14/20) noisy rattle in TB has stopped, still idles smooth, Removed throttle body, cleaned throat, butterfly that was somewhat covered in gas residue. The trans has been shifting erratically only up to 3rd, no 4th or overdrive, presumably limp mode. Not sure if TB is the cause, thanks
Thank you to vedyo,,I have mercedes s320 but in the sloly not staypl
Have the same problem with you so now im going tO do my own thingy
This is a great video to explain it!
i cant do that i didnt want do some wrong stip
Stip or Step ?
Very helpful
تغير كراسي المتور
nice thanx heaps
Ihave w140 s320
thanks
Blown out compression rings' lots of oil in side that cover supposed to be dry.dead motor rebuild time
@@garywillier4303 Old video. But after the throttle body was repaired the engine runs perfect, has full power, no smoke. PCV system could use some cleaning but the engine is fine.