My 1990 SL 300-24, has high idle at 1500rpm, i did change the overvolt relay and it dropped to 1100rpm, However now the car has been run for a few miles i have a 500rpm when drive is selected and in neutral its back to 1500 rpm. Your video may help me but for now having just got the car back on the road after being stored for 7 years i will live with it.AND do something in October, many thanks a very good video.
I can't say how defective throttle behaves on manual transmission cars. Here in USA we do not have manual Mercedes W210s. Maybe seen custom ones but I haven't seen one yet. If manual and auto cars have same throttle then put on ignition and listen to throttle with engine off. Throttle should be making buzzing noise if it works.
Hi youre a pretty detailed mechanic, on a 2001 s600 v12 the first 3 starts seems the car has very slow throttle response. After shutting off and restarting 3 or 4th time the car has great throttle response... ever heard of that? Thank you
Hi , I have a problem , Mercedes by s600 1995 m120/980 , when the machine is warming up to 80 degrees .right (throttle body)valve is turned off,tell me why ? please
Hey. I am having a hight idle issue on mine.i noticed the ETA doesn't buzz on switch on.and idle sits at 1500. Changed the ETA with another one and it is the same. What could be the problem?
Victor Victor victor my friend. Can you do a video on many reasons why vanity lights on sun visor wont come on Mercedes Benz SL500. I also subscribed to your channel.
I disabled and reassembled my ASR Throttle body. Now the engine reacts only when I go half way on the throttle pedal. And the Dashboard has the ASR light on. Any idea what I could have done wrong?
I have cold start idle problem on my 1995 E320. Engine idles erratically between 400-1000 RPM when it's cold. It starts and idles fine when warm. Also, the non ASR ETA clicks when it is cold. I also hear ticking like a typewriter on the idle speed module under the passenger floorboard. Car runs fine when warm though. Cruise control works too. I also have a code 17 "Data exchange error between modules" from my built in diagnostic. Is it a bad ETA or idle speed module? Could it be a bad OVP?
Hi Victor I'm curious what error codes this would have been throwing - since I'm thinking it may be the problem I'm seeing. I've a 94 E320 M104 W124 that I had the wiring harness replaced several years ago because the insulation was cracking up and falling off the wires. Since that time I've not had cruise control, ever, and lately I've been seeing an intermittent idling problem (drops so low when idling at a stop light that sometimes it dies). More to the point, though, I'm seeing codes 5 & 6. I'm guessing that the odds are good that my throttle body wires are shot like the harness was, for starters....
I need help my thottle body actuator, the wires look great but, the gears are free turning, like you mentioned in this video. My car staying idle in between 1200/1500...??? My car is non ASR, s420 1994...
I have a 2002 C32 and throttle surges to 2-3k I had the TB cleaned last year using about 2 TB cleaner and it went away but returned this year...I had a different friend clean it this time and it worked but returned about 2 weeks later..any recommendations?
hallo i have an 1994 w124 e220 non ASR and car works perfect but the idle is in cold at 1400rpm and then goes down to 1050-1100.Milege is ok of the car 7.5-8liters/100km,and idle is fix not shakeing.The trottle i can make any adjustment?.......y own a same mercedes automatic with ASR and i change the ECU,but only works when is worm the engine.what is nice is that the idle is perfect 750rpm,,,,,but when is cold it stops the engine after a few seconds.Please can you give me any idea?......
I changed the throttle sensor and it was ok.no lights on the instrument panel.but as soon as i wash the car the lights ( ASR + ABS + Oil light ,+ batt.....) .I think I have a short somewhere.please can.you help.I am spending lot of money and it seems all our mechanics are stupid.
Hi Victor, I have the same non asr throttle body in my w140 s320, but when turned into ignition the throttle body is not energised. As soon as the ignition is turned on the throttle body clicks and goes into limp mode. Great help if you can tell me why this happens.thanks
Also after pushing this hard upto redline and restarting the engine sometime when it gets heated the cruise control works and idle drops. But after cold start and driving fir half hour the cruise control doesn't work and idle is around 1200 rpm. Sometimes the engine also suddenly dies. After after starting it agian the car goes to limp mode
Hi. Can you tell me. My W124 using same throttle body. In town, my car is crazy on fuel, under 4km/L, but long distance it seems to be OK. What could be the problem..i do however use the aircon all the time.
Wow...I replaced the timing cover gasket and then started the engine, heard a noise in the upper engine and cracked the cam gear shaft on the intake cam....what did I do wrong ?
Throttle bodies and control modules are different. In theory it might be possible to swap computers and throttles and maybe some harnesses rewiring and ASR unit will work in non-ASR car. I never did this kind of swap. It is easier to repair existing system than to adapt to another
My 1990 SL 300-24, has high idle at 1500rpm, i did change the overvolt relay and it dropped to 1100rpm, However now the car has been run for a few miles i have a 500rpm when drive is selected and in neutral its back to 1500 rpm. Your video may help me but for now having just got the car back on the road after being stored for 7 years i will live with it.AND do something in October, many thanks a very good video.
Can you show how to get the pins out from the connector please
Could you tell me how the spring that goes behind the black part that appears in the video is assembled?
I can't say how defective throttle behaves on manual transmission cars. Here in USA we do not have manual Mercedes W210s. Maybe seen custom ones but I haven't seen one yet. If manual and auto cars have same throttle then put on ignition and listen to throttle with engine off. Throttle should be making buzzing noise if it works.
Hi youre a pretty detailed mechanic, on a 2001 s600 v12 the first 3 starts seems the car has very slow throttle response.
After shutting off and restarting 3 or 4th time the car has great throttle response... ever heard of that? Thank you
Hi , I have a problem , Mercedes by s600 1995 m120/980 , when the machine is warming up to 80 degrees .right (throttle body)valve is turned off,tell me why ? please
Same here and doesn't come back on for hours
Hey.
I am having a hight idle issue on mine.i noticed the ETA doesn't buzz on switch on.and idle sits at 1500.
Changed the ETA with another one and it is the same.
What could be the problem?
Victor Victor victor my friend. Can you do a video on many reasons why vanity lights on sun visor wont come on Mercedes Benz SL500. I also subscribed to your channel.
I disabled and reassembled my ASR Throttle body. Now the engine reacts only when I go half way on the throttle pedal. And the Dashboard has the ASR light on. Any idea what I could have done wrong?
Keep up the good work brotha....awesome
I have cold start idle problem on my 1995 E320. Engine idles erratically between 400-1000 RPM when it's cold. It starts and idles fine when warm. Also, the non ASR ETA clicks when it is cold. I also hear ticking like a typewriter on the idle speed module under the passenger floorboard. Car runs fine when warm though. Cruise control works too. I also have a code 17 "Data exchange error between modules" from my built in diagnostic. Is it a bad ETA or idle speed module? Could it be a bad OVP?
Hi Victor
I'm curious what error codes this would have been throwing - since I'm thinking it may be the problem I'm seeing. I've a 94 E320 M104 W124 that I had the wiring harness replaced several years ago because the insulation was cracking up and falling off the wires. Since that time I've not had cruise control, ever, and lately I've been seeing an intermittent idling problem (drops so low when idling at a stop light that sometimes it dies). More to the point, though, I'm seeing codes 5 & 6. I'm guessing that the odds are good that my throttle body wires are shot like the harness was, for starters....
What's that idil screw on the side of those gears???
I need help my thottle body actuator, the wires look great but, the gears are free turning, like you mentioned in this video. My car staying idle in between 1200/1500...??? My car is non ASR, s420 1994...
Rare throttle you have there. Call me one day to discuss. My number is on my website in description.
Victor, what gauge wire do you use to replace the defective wires with?
I have a 2002 C32 and throttle surges to 2-3k I had the TB cleaned last year using about 2 TB cleaner and it went away but returned this year...I had a different friend clean it this time and it worked but returned about 2 weeks later..any recommendations?
hallo i have an 1994 w124 e220 non ASR and car works perfect but the idle is in cold at 1400rpm and then goes down to 1050-1100.Milege is ok of the car 7.5-8liters/100km,and idle is fix not shakeing.The trottle i can make any adjustment?.......y own a same mercedes automatic with ASR and i change the ECU,but only works when is worm the engine.what is nice is that the idle is perfect 750rpm,,,,,but when is cold it stops the engine after a few seconds.Please can you give me any idea?......
I have 97 c230 and it doesn't open all the way when I press on the gas. How can I fix this?
Thank u
Is that the reason the wheel shake's when stop?
I changed the throttle sensor and it was ok.no lights on the instrument panel.but as soon as i wash the car the lights ( ASR + ABS + Oil light ,+ batt.....) .I think I have a short somewhere.please can.you help.I am spending lot of money and it seems all our mechanics are stupid.
Maybe lower harness is shorting. I can rebuild it. Price depends on year and model. My contact info is on my website in description
Hi Victor,
I have the same non asr throttle body in my w140 s320, but when turned into ignition the throttle body is not energised. As soon as the ignition is turned on the throttle body clicks and goes into limp mode. Great help if you can tell me why this happens.thanks
Also after pushing this hard upto redline and restarting the engine sometime when it gets heated the cruise control works and idle drops. But after cold start and driving fir half hour the cruise control doesn't work and idle is around 1200 rpm. Sometimes the engine also suddenly dies. After after starting it agian the car goes to limp mode
Hi. Can you tell me. My W124 using same throttle body. In town, my car is crazy on fuel, under 4km/L, but long distance it seems to be OK. What could be the problem..i do however use the aircon all the time.
I do not know. I need to see the car to figure out if electronics work properly.
Wow...I replaced the timing cover gasket and then started the engine, heard a noise in the upper engine and cracked the cam gear shaft on the intake cam....what did I do wrong ?
Don't know what engine you worked on. But valve cover gaskets replacements usually do not involve touching cams or cam gears.
@@vsandvs M104 front timing cover gasket...I'm puzzled too 94 E320
Victor how would you know if its a non-asr from asr without seeing the throttle body out of the car?
Look at the sticker iff sticker is
blue its whit out asr and tempomat
greeb, tempomat but non asr
white, asr and tempomat
I installed a new throttle body to my w202.Do I have to get it configured at the workshop or is it just plug in thing?
+Badrul Shah Where did you buy it?
In Kuala Lumpur, RM 1850
My idle is high and I changed throttle already R129 i think it's the control unit
Can i replace non ASR to with ASR?
Throttle bodies and control modules are different. In theory it might be possible to swap computers and throttles and maybe some harnesses rewiring and ASR unit will work in non-ASR car. I never did this kind of swap. It is easier to repair existing system than to adapt to another
the sound is gone after 5 min
все мозги вытрахал этот дроссель починить не кому информации толком нет
Олег Апрелев Заебал и меня тоже. сейчас разобрал все прочистил. но рычаг открывает на половину. я не понимаю почему.
кто бы еще на русский перевел
Boriiiiiiiiiiiiiing!