Woodturning a Diamond Chain-Link Bowl
Вставка
- Опубліковано 14 жов 2024
- As always, thank you for watching. I appreciate your support. This bowl is made from mahogany, peruvian walnut, and flame birch. The diamond pattern was a challenge. There were a ton of things to line up, and while it didn't turn out perfect, I was pleased with it. It was a lot of fun.
********************
Design Software:
woodturnerpro.com
Turning Tools:
carterandsonto...
www.carterprod...
www.robert-sor...
Lathe:
www.teknatool....
Wood Suppliers:
www.bellforest...
www.cheswoodsal...
Turning Supplies:
www.titebond.com/
www.woodturner...
www.mylands.co...
yorkshire-grit...
Misc. Equipment:
www.rockler.com/
www.woodcraft....
Beautiful bowl. And accompanying music very nice too.
One of the best I’ve seen you do! I love your craftsmanship and attention to detail. Just outstanding work!
Gorgeous bowl, Dan. Has a bit of an Egyptian look to me.
Amazing precision on that. Beautiful
Five people gave this a thumbs down? Unbelievable...... Beautiful work. I am a beginner turner at 58 and can only dream of someday turning something like this.
Thanks Tom! No worries. They're probably still living in their mom's basement and are disappointed with their life decisions. LOL!
I have the same segment programs that you use but the instructions are not through enough for me. I have never been able to make diamonds until I watched this video. You cleared it up for me. Thank you!
A treat watching you create a thing of beauty.
Fabulous bowl so intricate.
Exquisite as always! Thank you for sharing your gift!
You are doing great things! Thank you for the video!!!
Dan that is so gorgeous! Thanks so much for making me a ring! I can’t wait to see it in person. Hopefully I’ll do it justice! I’m very much a noob at segmenting but I’ll learn!
Wow, that is beautiful. Can't wait to get my table saw and try one of these segmented bowls.
What a stunningly lovely bowl. Outstanding!
WOW‼️ Beautiful, Amazing, Gorgeous 👍🏻👏🏻💫💝🥰‼️
An amazing design. I love the finish and how the wood seems to sparkle as it's rotated. Great work !
All I cay is WOW!!! I remain in awe of your work...thank you so much for sharing.
Awesome looking bowl 💜💜💜💜💜💜💜💜💜💜
Excellent job
Thanks! It look's Super!
An amazing talent, happy you share it with us with these videos. Your a true example with how well you do and with all the safety precautions you take.
Amazing precision. I'll never get so precise with my homemade equipment but enjoy trying. Congratulations on a magnificent job!
Absolutely BEAUTIFUL!! Probably not "kosher" to say but I'm jealous of your talent!!!
What a spectacular bowl Dan that's why you're the king of segmented turning awesome.
Dan another magnificent and stunningly beautiful bowl. I am in awe of your work. Wow.
THAT is a beautiful bowl and worth ALL the time and effort that went into the design and production! !! !!!.
Wow, Dan! Stunning.
Wow, another gorgeous masterpiece...love it!
That is so beautiful. What talent you have.
Absolutely beautiful, Dan. A complicated glue up but you made it look simple l
Awesome piece, thanks for sharing
Fantastic work Dan. It was a pleasure to watch
Gorgeous, absolutely gorgeous!!!!
Beautiful work
Thank you very much!
Amazing!
Beautiful
Watching your video, I just ordered a cross cut sled from Rockler
Great Job!!!!! Beautiful
The bowl came out really nice Dan!
Nothing simple for you, intriguing bowl, great job
super good, very well done
Another lovely piece, Dan. Just gorgeous.
Billy
Kind regards from the city of Santa Monica, CA, USA!
Another nice one Dan. Feature ring is good inspiration.
Great job! I know what my next build will be !
That is beautiful thanks for Sharing
Fantastic.
Thanks for watching.
beautiful work, i will tray to imitate it, thank you for the demonstration
So lovely!
Looks fantastic Dan and the choice of wood is perfect again.s
Gary
Beautiful piece! My daughter sat and watched it with me.
Great looking bowl 👍
I make the same comment I made on David's piece he made with your ring. Elegant.
Precioso todos los trabajos que realizas 👍👍
Just amazing!
¡Un cordial saludo desde la ciudad de Santa Monica, CA, USA!
Beautiful.
Just came over from your collaboration with David... what a Stunning piece! I’m Astonished that your channel doesn’t have more subscribers... I’m going to assume it’s a fairly new channel! Subbed and I can’t wait to go check out more of your art work! This made my OCD so happy along with being very relaxing in and of itself! Hehe
Hi KiraLyn, thanks for watching!
Salut dan, encore une fois félicitation, c est magnifique ce que tu fais, j espère un jour, arriver à ton niveau
I just discovered your channel and your videos are great as is your work. Not quite sure I understand how you made the diamonds. The rings right before you glue then together to make the diamonds don’t look the same. I’ll have to watch again. My first complicated turning was using walnut diamonds outlined with maple and it was a challenge.
Hi Greg, I'm not positive, but I think in this video I may have made two extra feature rings as spares.
Dan Livingston Makes its about the 4:30 mark right after you sand the rings.
Hi 👋 now that is so nice tanks for the video.
отличная работа, Dan.
Man that's a beautiful bowl you did.Dan i rely like video can't wheat to see more.
Hi Dan, I just found you from a collaboration you did with David Adamsen. Great video and a superb feature ring that had a lot of time and work invested in it. I have subscribed to your channel and having had a quick look at the thumbnails for your other videos I'm looking forward to watching them. Cheers.Huw
I have to echo all the other positive comments here. great job!
WOW!
You’re segmented pieces are absolutely beautiful Dan!
nice work
Beautiful piece. I am currently only doing segmented bowls. The problem I have is in the inside. There must be a difference in carbides as I seam to get bad catches with a round carbide. I am taking light cuts. Any suggestions? Thanks again for sharing your video.
Hi Curtis, thanks for watching. Yep, I know what you mean. I sometimes too get them with a round carbide cutter on the inside. Make sure that your tool rest is as close to the project as possible. If dull, make sure to rotate the cutter head or sharpen it using a diamond stone. Make sure also that the horizontal height on the tool rest is cutting at the equator of the project. If all else fails, use a well-sharpened 5/8 bowl gouge to shape it down enough for the scraper.
@@LivingstonBrothersWoodcraft Thanks for the reply
Parabéns 👏👏👏👏 sensacional
I'm curious, It seems you've mixed details of two different bowl assemblies in this video, the Zig-Zag style (best seen at counter 4:33) and the chain-link style (shortly after at counter >4:36). It took me a while to figure that out, but I did see the clever trick that gives the chain-link effect back at 3:54. Nice
Hi Dan, the software you are using, when you create a segmented piece either the bowl you made or a pen blank etc, can the software show what the final product will look like.
Not exactly, but close enough. The software does not take into consideration how you will shape it. But, it does comes close to showing you the final outcome.
hello mr dan.mire in your video that your bowl came out already segmented .. could you tell me if you have any program and if so, would you be so kind to tell me what it is called? .in advance thank you very much .. greetings
Hello! I use the WoodturnerPro software for segmented woodturning. Thank you for watching!
@@LivingstonBrothersWoodcraft thank you very much mr dan . for your answer to my question ... I congratulate you on your work is very good ... greetings 👍
So gorgeous. Watching your prep work and putting the materials into the rings it strikes me how meticulous you are with your craft.
Very nice work!! Where did you use the zig zag rings? Im a bit confused lol
On that video, I made two extra zig zag rings. One of those I mailed to UA-camr David Adamsen. The other one I still have for a future project.
I see, I am actually using your video to make a diamond bowl. Last night I was in my shop till 11pm cutting the 32 degree pieces and clamping them together, lining them up took a bit of time. This morning I cut the ends off but then got rudely irrupted by one of my builders so I had to run to a job. Ever since I bought a lathe I’ve been addicted to turning and when I picked up a drum sander the quality of my bowls went up ten folds. Now I hunt for ideas.. Thanks for your video!!!
Bellissima.
Wonderful bowl, where do you get the metal Nams plates?
Hi Glenn, thanks. I got them from a local area trophy shop called Etch-Art Awards.
Your work is great as always but I wonder why you don't use a riving knife on your table saw. Watching those long slats of wood being pressed through the saw with no riving knife and no downward pressure has me seeing visions of the board catching and flying upward and back toward you. Obviously you know what you are doing but the table saw is a scary tool not to be taken granted of.
Hi Ed, thanks for watching. I've had minimal trouble without it when cutting segments, but to your point, you're absolutely correct.
Dan where did you get the medallion on the base of you bowl?
I ordered those from a local trophy shop in my hometown. Etch-Art Awards.
I’m thinking about adding a Jet 1632 sander to my shop , is there any reason I shouldn’t?
Ray, it's my favorite tool in the shop! Buy it!
Thanks
How many days you took to finish it?
5 days
Some brilliant skills Dan admire how meticulous you must be