ULTIMATE Fishing Kayak Trailer Build
Вставка
- Опубліковано 21 чер 2021
- In this video I build the ULTIMATE Double Kayak Trailer! You can also see how you can win one for yourself!
SPONSORED BY LINCOLN ELECTRIC - bit.ly/JM_Lincoln
Check out Lincoln Electric for all of your welding and fabrication needs.
SIGN UP FOR KAYAK BASS FISHING - bit.ly/JM_KBFSignUp
Sign up and immediately recieve tons of gift cards!
YAKRODS - bit.ly/JM_YakRods
SAMS KAYAK - bit.ly/JM_SamsKayak
Johns Kayak - bit.ly/JM_Kayak
If you like this video you're going to love these!
- I Make a Guitar From BULLETS & EPOXY for Mat Best - • I Make a Guitar From B...
- We SHOOT A Desk With BULLET PROOF GLASS Built In! - • We SHOOT A Desk With B...
- WORLDS FIRST Double Decker Desk Build! - • WORLDS FIRST Double De...
- HUGE Desk & EPOXY Sign Build for WINCHESTER AMMO! - • HUGE Desk & EPOXY Sign...
You may also love these!
- HUGE 26 Foot Long EPOXY River Table Bar Build! - • My LARGEST River Table...
- 5 EPOXY Tips I Wish I Knew As A Beginner!- • 5 EPOXY Tips I Wish I...
3 LEVELS of Cornhole Boards DIY to PRO Build • 3 LEVELS of Cornhole B...
MERCHANDISE - shop.johnmalecki.com/
PLANS - www.johnmalecki.com/digital-p...
SAFETY GLASSES - geni.us/4h6xaM (Amazon)
Proudly Supported By:
Woodcraft - bit.ly/JM2021_Woodcraft
Timberland PRO - bit.ly/JM_TimberlandPRO
PIT BOSS - bit.ly/30Q9AeB
Lincoln Electric - bit.ly/JM_Lincoln
MAVERICK ABRASIVES - bit.ly/Maverick_JM. SAVE 10%- CODE: MALECKI10
BITS & BITS - bit.ly/JM-Bits CODE - MALECKI15 = 15% Off
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMaleckiBuilds/wood...
Metalworking Tools - kit.co/JohnMaleckiBuilds/meta...
Favorite Finishes - kit.co/JohnMaleckiBuilds/fini...
My Camera Gear - kit.co/JohnMaleckiBuilds/came...
#KayakBassFishing #KayakTrailer #CustomTrailer - Навчання та стиль
John: could use a magnet but we're not the fancy. Whike standing in a room with all new Lincoln Electric equipment valued in the 10s of thousands of dollars LOL.
Let's make Sparks should be your new t-shirt design. With a squirrel welding.
Sparky the TIG wielding squirrel!
I HAVE BEEN WAITING FOR OUTDOOR MATERIAL!!!!!!!!!!!!!!!!!!! YES YES YES YES YES YES YES YES!!!!!!!!!!!!
DAMMIT JOHN! Where was Jordan's Kayak???
🙌🙌🙌
Great job!
I believe that the axle is upside down though. It has a bow in it that's supposed to be up, so that when you load it with weight, it springs to be straight. I doubt there'll be enough weight on it to bow them, but you'll probably see tire wear with the axle upside down like that. Great job otherwise!
Dammit John!
I saw that too. Definitely should be flipped over 180 degrees.
John: You can’t use a modified axel in the state of Pennsylvania…you probably can’t use one anywhere.
Florida Man: Hold my beer
haha Florida anything goes.
@@danssmokintreasures damn right! 😂
*laughs in Californian*
So excited to use his kayak… stands on the pier 😂
Great welding video love the trailer. This is what me and my brother built. 2 triangle shape rails standing up with a bar on top connecting the 2 welded on a kit trailer we made 8 support bars 10 inches long welded to the rails 4 on each side covered with foam tube with 8 - 1 inch x 6 foot ratchet straps attach to carry 4 kayaks at an angle with room on the inside to put a floor to carry other stuff we put our pvc pipe rod carriers on the inside of the rails. Than we in close the inside with expanded steel grate with a triangle shape door at the back that open down a locking latch at the top. To keep our stuff safe while we're out fishing.
Love this man, been piling kayaks in pick-ups looking for other solutions for years for when we go to the yough or one of the three rivers. We go atleast once a week and i think this will be perfect!
You all should’ve run the wires for the lights inside of the tube/frame. It would’ve protected the wire for the lights. And since you mentioned tractor supply they sell all those brackets and everything that you fabricated.
I use to run one of those Lincoln plasma tables if you want a really close to straight edge run the machine with your tip .05 from the surface of the material (I've cut up to 3/4 in. Thick steel at that height) I've cut 1 in. Before but i haven't found the sweet settings for it yet
why wouldn't you name the cnc plasma cutter Kermit? you already got a Miss Piggy...
We may have a Kermit in the works…
One word... BBQ....
That is a awsome kayak trailer. I think it's a little over built in a heavy duty sort of way, but I guess that means you can hall more beer!!
haul?
Watching this from my desk at Lincoln. Do you think I could charge this as time spent watching training material? 😂
I say YES!
The fact that you love fishing makes me love your content even more!
Cool. I love kayaking and welding. Might need to make 1 of these. I'm 13 ps I'm pretty sure your root weld should be mig
Thank goodness you say “Creek” and not “crick”. I’m from Wisconsin and it drives me nuts when people don’t say it the right way. Stay squirrelly my friends
Pretty fantastic build, guys! Well done! 😃
Stay safe there with your families! 🖖😊
IT'S YAKING SEASON BOYS!
The fact the John fish’s makes him an even cooler guy 🎣🎣🎣
Loving the metal working, keep it up y’all
Love seeing a little arcs, sparks and weld marks on the channel!!!
I don't want a kayak at all but I'm going to enter just so I can win and then donate it to Jordan. Great video as always.
You’re too kind
Good call I would do the same...
BASS ACKWARDS Kayak Trailer, love it.
I was like wait isn't this my woodworking guy. lol
Yak life!!
I'm just in love with the tools you've got❤️🖤🖤
We made one to for 3 kayaks, love bass fishing in the sea have fun guys and awesome build :)
id like to see some plans for this build. I looked on the website and didnt see any! You guys are awesome!
Nice build I’m looking into getting a couple kayaks for my family and would like to see a diy kayak storage rack
I love how there is zero mention of Jordan joining in on any fishing or getting a kayak lol.
It’s lonely over here
Yinz should grab some pool noodles (the hollow ones) and split them then run them over the round bar the Yaks are sitting on. Steel on the plastic will rub and mark the yaks, the pool noodles will act as protectant and shock absorber.
Tig the root and mig for the fill, you can control your heat, and wire input
I watched your IG live a bit ago! You guys look like you are super excited for tomorrow. It's going to be 3 p.m. my time so I am going to have to make sure that I am somewhere that I cannot be disturbed. I can't wait to see all of the squirrelyness that will be on display tomorrow, LET'S GO!!!
Looks great
I would add some padding to the support bars so you don't scratch your boats
Pipe insulation is perfect for this
Scratches add character and the river is going to add them anyway. 😜
Nice job, that turned out good. You need to flip the axle. The arch should be going up and slightly forward to give you the correct toe in on the tires. They will wear better
Looks very clean!! Awesome work!
Sam got some hops!
Oh the welding sun burn on his left arm. Been there done that too many times.
John! We would LOVE to send you some anchors
Squirrelly time!
John, nice trailer build. Like the design. Question, how did you determine the axel placement?
Awesome job. Turned out very well. Keep up the great craftsmanship and hard work my friends. fab on. Weld on. Keep making. God bless.
When welding use bubble gum root with jb weld fill then cap it with duct tape. Works 60% of the time everytime.
For a trailer mig is plenty strong enough 💪TIG can produce a cleaner weld but I'd call it over kill in the application
I recommend putting some padding on the end of those rails sticking out the back of the trailer because you will end up whacking your shins on them.
My only concern is where the box tube tongue angle pieces connect to the rectangular base frame. That's a lot of pressure on a small amount of weld. Would be a good idea to weld some flat pieces there to add some extra reinforcement. You could cut out a custom shape on the new plasma.
1:03 Awww, I feel sorry for Jordan...
I called dibs on the first rocket ship we get
Tip for backing up your trailer. Take your hand and grip the bottom of the steering wheel with your fingers going on top not the bottom of the wheel. Now turn the steering wheel in the direction you want the trailer to go. It works every time.
Thats awesome.. im an avid kayak fisherman and live about 2 minutes from your shop
thats awesome Joseph, you crush the mon ?
@@John_Malecki every so often… I prefer lakes.. you should checkout cranberry glade lake in somerset. There are monster largemouth in that lake
Boss Hog! Is so awesome! I could watch that all day! There’s a huge bass tournament in East Harbor @Lakeside Marble Head! At the end of July! Worth checking out if you have time!
As someone from Switzerland, born and raised in the Netherlands till 26, I can’t fathom the fact that one can do this in the USA and just… drive it around…
don't say it too loud or they will start prohibiting and regulating everything.
That’s also how we feel. We can’t fathom or comprehend a place wheee the government controls so much of your life that you can’t make, build, create and just do stuff. The feeling is mutual.
Awesome build!
Great work
great video, love the channel and the content you guys put out!!!!
Huffing markers yessss
Thanks you brother infomation 👍💯
If you unscrew the terminal on your amp clamp you can drill a hole into an f clamp and bolt it on to that
No more worrying about thick metal
Awesome tip!
That's brilliant!
Excellent!!!!
Congratulations to the future winner . Enjoy the kayak
I'll be driving during that time , plus I can't remember what year it was the last time I purchased a fishing license it's been awhile
It's beautiful... 😲😃
Malecki! I like you even more now. Now since I invited Chad and he never showed up, i will invite you. get down here to Atlanta, I will take you down the Chattahoochee River for some epic Shoal bass fishing and possibly change your life forever. You can bring those other two guys as well if you want...
Never ain’t over yet!! I’m still down to make it happen brother
Nice work
Oops! Need to flip the axle! The bow should be at the top :)
Dang awesome build though! I need to get around to getting a trailer done for my own kayaks.
Бомбезную штуку собрали)
И да, ваши бы футболки в Россию) Думаю, своего покупателя точно бы нашли)
Can’t wait for tonight!
This is sick. I need one. But I need a kayak first.
Well Skross, if you want you can tune in thursday and maybe win one!
@@John_Malecki I definitely will!
More metal work please!!!!!!
"Fabricobble" 😂👍🤝
You guys can get away with the first idea (build) and riding the back of the truck here in Texas 🤣😎
What's your favorite river to fish out your way? I always liked the bend around Coal Center on the Mon when I was at Cal U.
How fun!
So awesome!!! I’m winning this one!! Hahaha good luck everybody
Someone else realised the sun marks on John's arms? JAJAJAAJAJ probably for fishing. Good trailer
Depending on the base material, TIG welding crystallizes the material on either side. Due to intense pin point heat.
Hey John. I was looking at those yaks and didn’t see if they can have paddles or maybe a little motor on the back? Not sure if you’ve ever seen these with them. But if so let me know. Thanks buddy
Looks awesome John...stay away from those Allegheny White Fish.
No kayak for Jordan? Also, the 24th is by birthday, would be awesome to win that kayak........ :)
Nice tan lines, John ;-)
Good video!!!
cool
What is the dimensions of the trailer? I am wondering if I can modify an existing jetski trailer to accommodate my fishing yaks as well. Awesome job!
With the correct technique and correct settings TIG and MIG are both equally strong. Done incorrectly both of them can be shit as well. There are going to be a lot of 'purists' (ie: welding hipsters) that say TIG is stronger but it's really not. It's cleaner, and sometimes easier, but that's about it. If anyone wants to claim MIG isn't as strong, tell me why the frames for the largest dump trucks in the world are MIG welded. Look it up. If it's good enough for the frame of a 1.3 million pound vehicle, it's good enough for your trailer.
Beautiful build, Gentlemen! Lol I’m gonna have to say that it’s not a true kayak or boat trailer without a storage container for life jackets and all of the xtra crap! Lol. Step it up brotha! 🤪
Nice trailer!
What are you going to donif Jordan win the kayak??? Make an other trailer??? Greate built!!
Also, if you are not living in the USA, you can win in the give away?
Dude, where is the "Dammit Jordan" shirt? It was jokingly shown in a previous video, but I really wanna buy it, haha
My name is Jordan and as soon as I saw it I wanted it, but lo and behold, it's not there, so I just custom printed on on Amazon
I had, and loved my Lincoln welder, but it was one of the many tools stolen from my garage while I was down at the VA hospital having my neck fusions checked last year. they used my shop carts to steal almost all of my tools, and quite a bit of materials. 40 years of wood working and metal working tools gone. I hate tweakers
Do you happen to have plans drawn up for that trailer?
Watching the video I didn’t see where you mentioned what type of tubing did you use for the bunks. I’ve seen another video content where they used EMT. Can’t find that very cheap around here. Even the thin wall emt is around $40 for a 10’ section. Did you used standard steel(black pipe) on this build for your runners? In the process of converting my old seaark trailer into a monster multi kayak hauling machine
Dammit Jordan! Where’s yours?! Think John owes you a new driver/putter so can go play some golf somewhere good while they show how cool and unblemished by fish smell their new toys are.
I agree. Thinking a Scotty Cameron maybe
i just watched the video where you made the epoxy guitar. and i see youre into fishing. so im thinking what if you made an epoxy electric bass. with a bass(fish) in it ;)
Why not run the wiring on the inside of the square tube frame?
it was more work and makes it more difficult to replace haha
I had that exact same thought, it’s where my boat trailers wires are run.
Nice job boys, I didn’t here one “Damn it Jordan” in the whole video, is someone on their meds or is Jordan behaving?
Root TIG all day!!!
😍
What does that plaz cutter cost??
Where can I get a build sheet to.make this myself??? I love it
So any chance we can get a link to the same kayak as Sam’s? Been looking for an upgrade over my modified Costco tandem. Kinda fat and have a service dog so need a wide stable setup. Tired of running outriggers but can’t afford a hobie on a VA check lol.
PS been losing weight since I restarted my woodworking hobby due to finding your videos.
here is sams bit.ly/JM_SamsKayak , and mine bit.ly/JM_Kayak (PS I am also chubby)
Awesome thanks. Looking forward to more shenanigans.
PIVOT!!!
Something else just occurred to me, are you branching out into metal work since you would have to take out a second mortgage on your house to buy lumber these days. It probably cost less to build that trailer than to make a bathroom vanity.