Really good job on camera placement as well as lighting. and watching hands. Being a mechanic is one thing, but making useful videos and editing them is a comple separate skill. Good job.
Just a heads up. never start the vehicle on an empty pump. Good practice is to install the pump and res first. Fill the res, then spin the pump by hand to draw in fluid. Then install belt last. Jack up the front so wheels are off teh ground, and manually work the steering wheel back and forth as you fill the fluid. This will need about 50 back and forth to bleed teh air out. Once the air is largely out you can start the vehicle. and continue another 25 or so cycles lock to lock while running and cap off. This process will allow your pump a much greater life expectancy
did u end up having more issues with the piwersteering system? I'm on pump #3 and I'm suspecting the teflon off the line came off since pump # just failed on me. might want to change out that high pressure line for another one.
So far so good (our other JKU had a similar issue and fine with Mopar replacement). Very possible that you have a line is degraded and causing issues. Good luck.
@@EricCantin well I fixed the issue. it was the high pressure line. there's a known problem with the JK's high pressure line. teflon liner inside the high pressure line delaminates and makes its way into the gearbox.
Eric, great video. Very detailed and to the point. I picked up new Mopar pump, but it did not include O-rings. What size is the O-Ring for the supply line?
Thanks, the trial and error was getting frustrating! Good question. It was included with the off brand kit and the original one is long gone. I think most generic O-Ring kits would have one the same size. Another option would be to go to the local autoparts store with the removed O-Ring to see if they can match the size.
Hey Eric, I completed my PS pump replacement. Thank you again for your detailed video. It was very helpful to the DIY guy like me. : ). The O-Ring size on the supply side is a 5/16 x 7/16 x 1/16.
halo eric semoga anda mau menjawab masalah saya saya dari indonesia jk saya ada masala stering q bunyi saat di putar stang ster nya.. kira" di mana problemnya
You will have to determine if the sound is coming from the pump, and check that all steering components are in good condition, including the steering damper. Good luck!
Had anvance auto replacement, makes more noise than factory one so swapping back.. it was my steering shaft that was problem, and in last year my bottom hose came loose twice. Jeep wrangler sucks, wish i had my old ford escape back, never got stuck in snow with that, got stuck twice in the wrangler.
Only way a Ford Escape could be better than a Wrangler in the snow is due to tires. Have seen many Jeep owners rely on mud terrains all winter and make similar statements.
Thank you so much for posting this. It's so clear and well organized. Will this work with a 3.8 as well? The setup looks the same but I want to make sure.
Really good job on camera placement as well as lighting. and watching hands.
Being a mechanic is one thing, but making useful videos and editing them is a comple separate skill. Good job.
Just a heads up. never start the vehicle on an empty pump. Good practice is to install the pump and res first. Fill the res, then spin the pump by hand to draw in fluid. Then install belt last. Jack up the front so wheels are off teh ground, and manually work the steering wheel back and forth as you fill the fluid. This will need about 50 back and forth to bleed teh air out. Once the air is largely out you can start the vehicle. and continue another 25 or so cycles lock to lock while running and cap off. This process will allow your pump a much greater life expectancy
did u end up having more issues with the piwersteering system? I'm on pump #3 and I'm suspecting the teflon off the line came off since pump # just failed on me. might want to change out that high pressure line for another one.
So far so good (our other JKU had a similar issue and fine with Mopar replacement). Very possible that you have a line is degraded and causing issues. Good luck.
@@EricCantin well I fixed the issue. it was the high pressure line. there's a known problem with the JK's high pressure line. teflon liner inside the high pressure line delaminates and makes its way into the gearbox.
@@xXDannySilvaXx I might as well tackle this pre-emptively. Thank you.
@@xXDannySilvaXx did you just replace the high pressure line and the pump? I'm suspecting I have the same issue.
very good video - thanks
Love these videos!
Thanks, trying to make them fun and entertaining.
Eric, great video. Very detailed and to the point. I picked up new Mopar pump, but it did not include O-rings. What size is the O-Ring for the supply line?
Thanks, the trial and error was getting frustrating!
Good question. It was included with the off brand kit and the original one is long gone. I think most generic O-Ring kits would have one the same size. Another option would be to go to the local autoparts store with the removed O-Ring to see if they can match the size.
Hey Eric, I completed my PS pump replacement. Thank you again for your detailed video. It was very helpful to the DIY guy like me. : ). The O-Ring size on the supply side is a 5/16 x 7/16 x 1/16.
Awesome and thanks for sharing the o-ring specs.
9:32 "I will tighten them down by hand" grabs impact wrench and gives it several nuga, nugas.
Those were baby nuga nugas! 🤣
halo
eric semoga anda mau menjawab masalah saya
saya dari indonesia
jk saya ada masala stering q bunyi saat di putar stang ster nya..
kira" di mana problemnya
You will have to determine if the sound is coming from the pump, and check that all steering components are in good condition, including the steering damper. Good luck!
@@EricCantin ok..awal pertam tidak ada bunyi.setelah ganti selnya seketika itu dia bunyi
good job but if add PSC Performance Steering Install tha ll help a lot
It would, but this Wrangler is going to remain tame for now. Have a few other Jeeps that’ll be getting crazier upgrades.
@@EricCantingood luck hope to see more video
Thanks and working on it! Many more planned.
Had anvance auto replacement, makes more noise than factory one so swapping back.. it was my steering shaft that was problem, and in last year my bottom hose came loose twice. Jeep wrangler sucks, wish i had my old ford escape back, never got stuck in snow with that, got stuck twice in the wrangler.
Only way a Ford Escape could be better than a Wrangler in the snow is due to tires. Have seen many Jeep owners rely on mud terrains all winter and make similar statements.
Thank you so much for posting this. It's so clear and well organized. Will this work with a 3.8 as well? The setup looks the same but I want to make sure.
I think the 3.8 pump is at the top of the engine and much easier to access and replace. Concept would be similar, but not identical. Good luck!
@@EricCantin you were right! Thank you so much! It was much simpler to get to. I decided to change my supply hose too since it was stiff and bulging.
Good video. I have to do the same job. How much ATF did you need to refill?
Thanks! I flushed a bit out. I think 1.5-2L or so. I was surprised as to how little is needed.
@@EricCantin Thank you so much for the help!
apa perlu riset setelah ganti pompa
All power steering pumps have some play like that
Some manufacturers tolerate more than others for the same unit.