Support and Tool List- www.amazon.com/shop/acservicetech Support- www.patreon.com/acservicetech For those that are looking for the tools used in the videos: (Linked Below) Here is the Link for the Yellow Jacket Refrigerant Manifold Gauge Set used in the videos- amzn.to/2aenwTq Here is a link to Refrigerant hoses with valves used in the videos- amzn.to/2aBumVI Here is a link to the UEI DL389 Multimeter used in the videos- amzn.to/2xAdaJf Here is a link to the Imperial 535-C Kwik Charge Vaporizer for Charging Refrigerant- amzn.to/2wFHtBW Here is the link to the Fieldpiece ST4 Dual Temp Meter- amzn.to/2wc1ME3 Here is a link to the Digital Refrigerant Scale used in the videos- amzn.to/2b9oXYl Here is a link for RectorSeal Bubble Gas Leak Detector amzn.to/2ckWACn Other tool links can be found in the video description section. ACSERVICETECH is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. Check out other videos on the HVACR topics of interest at- ua-cam.com/channels/OZR-1IqsAer9wzlvFgb4mA.htmlplaylists?view_as=public If you want to support the ACSERVICETECH Channel and receive more HVAC content, check out www.Patreon.com/acservicetech
Hi there. Great video however, FYI could you just slow down a little. I had to keep pausing on some sections. Other than that I'm a heating engineer in th UK who's looking to get into refrigeration, so your video was extremely clear and informative. Thank you
@@michaelchaikoski9304 funnily enough, the guy who invented commercial refirdgeration AND Chlorofluorocarbons and leaded Gas was the SAME Person. Thomas Midgley Jr. Invented all of those things. Of course he had no idea what they would do to our health and environment. 😅
The fact that I sat in a 6 hour class on this subject, and still didn't get it, but watched a 4 min video, and now got it down is sad! these trade schools just want to take your money and push through their program as fast as they can! It's really a shame because guys graduate, get their certs, and can't answer anything when it's time to interview.
Thanks for explaining so well in few words. Saturated state: Where vapor an liquid coexist High pressure high temperature vapor into condensing unit after compressor. High pressure high temperature sub cooling in the condenser Low pressure low temperature into evaporating unit after the expansion valve. Low pressure low temperature super heating in the evaporator unit. It is latent heat rejection & condensation followed by sub cooling in at high pressure and temperature inside the condensation unit It is latent heat addition followed by super heating at low temperature and low pressure after the expansion valve inside the evaporator unit.
This Fresh Air Snipe misses being out to Sea. Music to my ears was our whistle blown over the 1MC, ship's intercom throughout every deck and from the bridge saying, "All hands, fore and aft. THIS IS YOUR CAPTAIN SPEAKING... Set Sea and Anchor Detail. All hands fore and aft, set "Sea and Anchor Detail. That will be all! Of course, everything is water or rather ocean, cooled. I accepted a platform instructor's position teaching AC/R shoreduty billet for 18 months, I loved it, best job ever. Thanks, oh, we used to get those suction valves just a chattering on those reciprocating compressors or hot gasing the evaporator coils in the freeze boxes. Again thanks.
Thanks for your video I made my teacher's jaw drop today cause I knew everything of the basic refrigeration cycle. Once again much appreciated thank you.
Absolutely powerful video and great detailed explanation! I went to trade school back in 2009-2010 and graduated knowing very little about hvac. This 4:34 minute video explained more to me than I ever learned at trade school. Wow. Thank you for sharing!!!!!!
Started out doin simple things like home maintenance then moved to fence and beach home framing. Today i start learning this. as i recieved a invitation in sc with my cousin so im tryin to cram as much basic info as possible so i learn quickly. Thanks for the video
It 's really very simplified way for learning refrigeration cycle. I am in the first year of technical college for HVAC . Appreciated for this tutorial !!
Thanks guys doing Teach training at school and couldn't get my head wrapped around the chemistry of the temperature/pressure change relationship. Thanks for posting! Think I got it now.
I just passed the EPA universal certification test. I was using SkillCat app and going through the program only once and passed the test within one week. I do have some background in HVAC and chemistry though.
The drew aschematic diagramof a simple refrigeration vapor compression cycle. Cycle and system .The components required for a compression refrigertion system are a coppressor ,condenser,liquied receiver expansion valve andevaporator or cooling coils the refrigerant flowfrom the expansionvalvethrough the whre eitabsorbs heatandbecomesa gasorvapor thenit flows to compessor whreit iscompressed to the condenser pressure in thecondeserthe heat removedandthe receiveritflows to theexpansionvalveto startthe vciruit again the refrigerantis underlowpressurfroevaporatertothe comprssor suction this portion of the system is called the ..lowside .the refrigeant is under high pressure fromthe compressor through the condenser. liquied reciver high pressure from the compressor through the condenser .liquied receiver and liquid line to the expansion valve .Thisportin of system is called the high sidemthe ev expansion valv ethrough the
Very good and well-explained video. I'm taking my EPA 608 test tomorrow, this will help keep it fresh in my mind. I watched several more of your videos and am now a subscriber, so I'll be seein' ya! 😄
Not like anyone reads these comments but for easy understanding, correct me if wrong but the system has a split at either the compressor or the metering device. These points are doing the opposite of each other. With the same point being made for the condenser and the evaporator. The condenser does the opposite of the evaporator but by the same process. The metering device begins low pressure and temp, and the compressor begins the high pressure and temp. The whole process is a change from a full vapor to a full liquid and by understanding the main components essentially do the opposite of each other really simplifies the cycle in the brain.
thank you so much for this, its helped me understand refrigeration cycle in full. I was having trouble fully understanding some points in class and this video along with your superheat/subcool have cleared those issues up for me. subscribing to your channel for sure!
I just started apprenticing in commercial refrigeration. So we deal with walk-ins. My original understanding of the subject was that something cooler than another thing will draw the heat to the cooler thing, thus removing the heat and making it cooler. In a walk-in fridge, the low pressure side coming into the fridge and through the evaporator coil is warmer than the air in the fridge. How is the warmer thing taking out heat from the fridge that’s already cooler? I really hope that makes sense. Please remember I’m just starting to learn; go easy on comments please. Lol
great video man. You saved my physics grade. We had to explain how something works and i got an AC. I was so confused until i saw ur video. Keep up the great work
Absolutley Awesome ive watched this 10+ times can you please do one on a gas furnace. startingg from checking the draft induced motor and going over each step and part all the way too the blower?
Great video really helped further my HVAC knowledge. I just want to clarify that when the low pressure low temperature vapor leave the evaporator coil it is superheated right ?
Thank you for your valuable information. Do you have any videos or Book about A2L refrigerant safety, tools and where can we get certified to work . Thank you
Great video! Refrigerant is amazing stuff huh, just manipulate it's temperature/heat transfer abilities all by pressure. I am starting to grasp the concept
Yes it is, great to hear! I am glad that you enjoyed the video and that you understand the cycle more! Hear is another on the refrigeration cycle video using a unit to explain---------ua-cam.com/video/qqLwE7Kbyaw/v-deo.html
FANTASTIC Video and the best video that talks about the refrigeration cycle. I'm currently designing a condensing unit and do not know exactly what size of galvanized metal sheets to use for its protector body. You have mentioned that you have a sheet metal teaching license. Can you help me with that aspect, please?
Great video. Its hard to your head around the physics of phase change. Heat gets exhanged without a change in temperature right? Is it true that the temp of the refridgerent isnt changing that much thru the whole cycle BUT a lot of heat is being exchanged because of the 2 pressure changes ?
@@acservicetechchannel Thank you. I have been following your channel for some time now and have recently started taking an HVAC/R course. Your lessons here are better than the ones at school.
hi Thanks for your clear explanation of Refrigerator Cycle. I have one rather important question I would like to ask. Your Airflow where does the Air come from. Is it normally a Close Loop System where the Air is constantly re-circulated by the Evaporator Fan in the Fridge, or is Fresh Air Intake going on so that the Evaporator Fan is constantly pulling Fresh Air from the Outside and blowing it through the Evaporator Coils inside the Fridge. Also if it is not a close Loop System and the Fresh Air is constantly being sucked in from outside , is it vented out as it is recirculated inside and replaced by a fresh stream of air. Thanks
Great explanation. Why do I always hear “the heat is dumped outside,”” (at the condensing coil). Indicating that the heat you feel from the outdoor unit is from inside the building?
The low side(cool side) absorbs heat from within( for the sake of example) your house. There’s an area where the warm air in your house can contact the evaporator and draw the heat in, thus cooling your house. The refrigerant that has absorbed all that heat from the warm air then travels to the condenser coil, outside, where a fan connected to the unit blows all that out of the condenser. Hence ”dumped” (blown off)it out outside. This is a very simple and shortened explanation. Any others who read this can give their two cents on my explanation.
I'm sorry, I really appreciate your magnificent content, but the heat is a result of compression/decompression of the refrigerant gas by the expansion happening in the condenser unit.❤❤
I went to your website and I'm not sure I understand your membership levels. I'd like to donate, but I'm not ready to make an ongoing commitment. How do your levels work? If I donate once is there an ongoing expectation to keep donating?
Are their rule of thumbs for ideal condenser, evaporator, discharge and suction temperatures? Would their be a point where increasing evap airflow causes temperature to increase too much? Would their be a point where increasing condenser airflow decreases the gas temp be too low?
Thank you for the explanation, can you make a video explain water cooled and air cooled chiller! if you have already made one can you shear the linke. also interested to learn more about Air Handling unit system.
Wouldn't the condenser fan motor be sucking air through the condenser, not blowing it out. Usually I put a piece of paper on the condenser to see what the fan is on, when it's on it should stick.
This may be stupid as I am only an installer. But if Freon has a lower boiling point, how is it a high temp liquid going into the evap coil, but a low temp vapor. I figured high temp &/ high pressure would evaporate the Freon going back to the condenser
Support and Tool List- www.amazon.com/shop/acservicetech
Support- www.patreon.com/acservicetech
For those that are looking for the tools used in the videos: (Linked Below)
Here is the Link for the Yellow Jacket Refrigerant Manifold Gauge Set used in the videos- amzn.to/2aenwTq
Here is a link to Refrigerant hoses with valves used in the videos- amzn.to/2aBumVI
Here is a link to the UEI DL389 Multimeter used in the videos- amzn.to/2xAdaJf
Here is a link to the Imperial 535-C Kwik Charge Vaporizer for Charging Refrigerant- amzn.to/2wFHtBW
Here is the link to the Fieldpiece ST4 Dual Temp Meter- amzn.to/2wc1ME3
Here is a link to the Digital Refrigerant Scale used in the videos- amzn.to/2b9oXYl
Here is a link for RectorSeal Bubble Gas Leak Detector amzn.to/2ckWACn
Other tool links can be found in the video description section.
ACSERVICETECH is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.
Check out other videos on the HVACR topics of interest at- ua-cam.com/channels/OZR-1IqsAer9wzlvFgb4mA.htmlplaylists?view_as=public
If you want to support the ACSERVICETECH Channel and receive more HVAC content, check out www.Patreon.com/acservicetech
Hi there. Great video however, FYI could you just slow down a little. I had to keep pausing on some sections. Other than that I'm a heating engineer in th UK who's looking to get into refrigeration, so your video was extremely clear and informative. Thank you
Plz visit my channel
Dr HVACR
Good googl fee all seching gies welcome mister been ok thankyou gues
Been a service tech for 10 years and still watched this video to keep myself sharp and to the basics
P
K
Salary?
I've always wanted to do commercial refrigeration. It still amazes me whoever figured this system. Genius.
@@michaelchaikoski9304 funnily enough, the guy who invented commercial refirdgeration AND Chlorofluorocarbons and leaded Gas was the SAME Person.
Thomas Midgley Jr. Invented all of those things. Of course he had no idea what they would do to our health and environment. 😅
The fact that I sat in a 6 hour class on this subject, and still didn't get it, but watched a 4 min video, and now got it down is sad! these trade schools just want to take your money and push through their program as fast as they can! It's really a shame because guys graduate, get their certs, and can't answer anything when it's time to interview.
That is a shame but on the other side I am glad you learned so much from the content here, thanks!
This video like all on this channel ,is clearly an example of a gifted and hyper intelligent ,master tradesman!!
TWS got me for about 20k. And my homeboy knows more than me. And he learned by just being around mf's! Shame
I’m in the same boat, graduated from trade school literally TODAY with my Universal EPA and still haven’t gotten it down.
@@johnpolos8796 how you doing now
when you come home after class and learn on youtube...great short lesson...Thanks!
Glad you liked it!
Thanks for explaining so well in few words.
Saturated state:
Where vapor an liquid coexist
High pressure high temperature vapor into condensing unit after compressor.
High pressure high temperature sub cooling in the condenser
Low pressure low temperature into evaporating unit after the expansion valve.
Low pressure low temperature super heating in the evaporator unit.
It is latent heat rejection & condensation followed by sub cooling in at high pressure and temperature inside the condensation unit
It is latent heat addition followed by super heating at low temperature and low pressure after the expansion valve inside the evaporator unit.
Been a svc tech 30 yrs and still watch this video to keep up with the basics to teach the newbies on the Trade
This Fresh Air Snipe misses being out to Sea. Music to my ears was our whistle blown over the 1MC, ship's intercom throughout every deck and from the bridge saying, "All hands, fore and aft. THIS IS YOUR CAPTAIN SPEAKING... Set Sea and Anchor Detail. All hands fore and aft, set "Sea and Anchor Detail. That will be all! Of course, everything is water or rather ocean, cooled. I accepted a platform instructor's position teaching AC/R shoreduty billet for 18 months, I loved it, best job ever. Thanks, oh, we used to get those suction valves just a chattering on those reciprocating compressors or hot gasing the evaporator coils in the freeze boxes. Again thanks.
Nice thanks Timothy! It is always best to have an excited teacher!
Accurate, simplified, and concise. Excellent and thank you!
Thanks Guy named Shannon!
Best explanation of the refigeration cycle I've seen so far!
Thanks W00zyCrab, I appreciate it!
I couldn't agree more, awesome simple tutorial.
Thanks for your video I made my teacher's jaw drop today cause I knew everything of the basic refrigeration cycle. Once again much appreciated thank you.
Ha ha that's awesome! Its students like you that go the extra mile that really make a teacher proud and excited to teach! Thanks for letting me know!
This man is a godsend to the hvac world
Absolutely powerful video and great detailed explanation! I went to trade school back in 2009-2010 and graduated knowing very little about hvac. This 4:34 minute video explained more to me than I ever learned at trade school. Wow. Thank you for sharing!!!!!!
Started out doin simple things like home maintenance then moved to fence and beach home framing. Today i start learning this. as i recieved a invitation in sc with my cousin so im tryin to cram as much basic info as possible so i learn quickly. Thanks for the video
This actually helped me a ton with getting my head wrapped around this concept.
It 's really very simplified way for learning refrigeration cycle. I am in the first year of technical college for HVAC . Appreciated for this tutorial !!
Thanks Hasan!
I thought increase in pressure meant reduction in temperature
@@oyeniyiadenuga5779 Always pressure increases heat
just bought your service book for house refrigeration, thank you for such a great channel and making my studying easier 💪💯
Thanks guys doing Teach training at school and couldn't get my head wrapped around the chemistry of the temperature/pressure change relationship. Thanks for posting! Think I got it now.
Keith, thats awesome!
This video answers alot of EPa universal test questions. Great man
Another "thank you" for ya. clearest summary of the system I've come across. great refresher for me.
Thanks a lot Kevin!
I just passed the EPA universal certification test. I was using SkillCat app and going through the program only once and passed the test within one week. I do have some background in HVAC and chemistry though.
Great job!!
i appreciate that you have a video on the subject yet you are able to explain it clear and proper.. this is another good skill you possess
I appreciate that!
The drew aschematic diagramof a simple refrigeration vapor compression cycle. Cycle and system .The components required for a compression refrigertion system are a coppressor ,condenser,liquied receiver expansion valve andevaporator or cooling coils the refrigerant flowfrom the expansionvalvethrough the whre eitabsorbs heatandbecomesa gasorvapor thenit flows to compessor whreit iscompressed to the condenser pressure in thecondeserthe heat removedandthe receiveritflows to theexpansionvalveto startthe vciruit again the refrigerantis underlowpressurfroevaporatertothe comprssor suction this portion of the system is called the ..lowside .the refrigeant is under high pressure fromthe compressor through the condenser. liquied reciver high pressure from the compressor through the condenser .liquied receiver and liquid line to the expansion valve .Thisportin of system is called the high sidemthe ev expansion valv
ethrough the
Cycle ing
I just started in the field. This video was extremely helpful! Thank you!
Very good and well-explained video. I'm taking my EPA 608 test tomorrow, this will help keep it fresh in my mind. I watched several more of your videos and am now a subscriber, so I'll be seein' ya! 😄
Awesome and good luck on your test!!!
Best explanation I have watched so far.
Not like anyone reads these comments but for easy understanding, correct me if wrong but the system has a split at either the compressor or the metering device. These points are doing the opposite of each other. With the same point being made for the condenser and the evaporator. The condenser does the opposite of the evaporator but by the same process. The metering device begins low pressure and temp, and the compressor begins the high pressure and temp. The whole process is a change from a full vapor to a full liquid and by understanding the main components essentially do the opposite of each other really simplifies the cycle in the brain.
Thanks a ton, was asked this question for a job interview. now I know!
Great video and clear explanations to all parts---- thanks!
Good video.. You actually answered the small things also which is very important
a lot of thanks of this video. i passed my interview :)
That is awesome to hear!
thank you so much for this, its helped me understand refrigeration cycle in full. I was having trouble fully understanding some points in class and this video along with your superheat/subcool have cleared those issues up for me. subscribing to your channel for sure!
I just started apprenticing in commercial refrigeration. So we deal with walk-ins.
My original understanding of the subject was that something cooler than another thing will draw the heat to the cooler thing, thus removing the heat and making it cooler. In a walk-in fridge, the low pressure side coming into the fridge and through the evaporator coil is warmer than the air in the fridge. How is the warmer thing taking out heat from the fridge that’s already cooler? I really hope that makes sense. Please remember I’m just starting to learn; go easy on comments please. Lol
Best explanation everrr!! Thank you!
You're the best teacher!
Man thank you best explanation by far !!!
Glad you liked it!
I just want to say thank you to the techs that take the time to make these videos.
Glad to help!
I always thought the pressure is what cooled tge refridgerant. Thanks for the video.
Thanks for the simple and concise explanation of how the entire cycle works!
Thanks DogTownP!
Great video man this is all I do after class just learn and get info! thank you! 🙏
Really awesome to hear!
great video man. You saved my physics grade. We had to explain how something works and i got an AC. I was so confused until i saw ur video. Keep up the great work
great video i had a basic understanding how the refrigeration cycle worked but this helped me fully understand it
Thanks marinos!
I found your vids to be way easier for me and my guys
I am glad you are finding them useful!
great job. nice to listen to basic refrigeration and how it works.
Thanks Felipe Balli, are you teaching during the summer or are you off working the trade?
Watched 5 other videos on this and still didn’t understand it. This was very clear and concise!
Absolutley Awesome ive watched this 10+ times can you please do one on a gas furnace. startingg from checking the draft induced motor and going over each step and part all the way too the blower?
I enjoyed the tutorial.
Video is great i kept getting stuck on tempature change and were it happens in the cycle and this video cleared it up thank you
Thanks Edgardo!
Thank you, that was very helpful!
Thanks for that simple but informative explanation.
Thank you much!!! Very helpful
Awesome how you explain.
Thank you
Great video really helped further my HVAC knowledge. I just want to clarify that when the low pressure low temperature vapor leave the evaporator coil it is superheated right ?
Great video, I learned a lot and very simple to follow explanation.
Thanks xpmark1
91C US Army, thanks for the help!
This was a helpful diagram to help me identify the locations I can place my service valve on the inlet side. Thanks!
Thanks VileDesecrator!
Great video thank you
Glad you enjoyed it
I swear I learned more from watching these videos than I did from going to college
Thank you for your valuable information.
Do you have any videos or Book about A2L refrigerant safety, tools and where can we get certified to work .
Thank you
Great video! Refrigerant is amazing stuff huh, just manipulate it's temperature/heat transfer abilities all by pressure. I am starting to grasp the concept
Yes it is, great to hear! I am glad that you enjoyed the video and that you understand the cycle more! Hear is another on the refrigeration cycle video using a unit to explain---------ua-cam.com/video/qqLwE7Kbyaw/v-deo.html
FANTASTIC Video and the best video that talks about the refrigeration cycle. I'm currently designing a condensing unit and do not know exactly what size of galvanized metal sheets to use for its protector body. You have mentioned that you have a sheet metal teaching license. Can you help me with that aspect, please?
Possibly around 20 gauge, thanks
So much better then Bryan Orr. You're easier to understand and go slower.
Thank you!! This was explained so bad in trade school.
I am sorry to hear that, thanks!
I'm learning from this
Nice presentation
This makes so much sense thanks
Many thanks for the explanation, thanks also being so pattiently,,youre the iceman.God blesh you
What a great video!!! Thanks for explaining 🙏🏻
Great video. Its hard to your head around the physics of phase change. Heat gets exhanged without a change in temperature right? Is it true that the temp of the refridgerent isnt changing that much thru the whole cycle BUT a lot of heat is being exchanged because of the 2 pressure changes ?
Nice job!!
Thanks Will!
Detailed and Concise!!! Thank you, Sir.
Thank you Shane!
Awesome video series.
Awesome video and awesome channel. Could it be possible to edit in the actual temperatures at they key points along the system?
It isn't but I will have newer videos coming out that it is possible to add them in, thanks!
@@acservicetechchannel Thank you. I have been following your channel for some time now and have recently started taking an HVAC/R course. Your lessons here are better than the ones at school.
Thanks a lot Scuba Diver, yeah a lot of time goes into each video. I appreciate you leaving me this note. Where are you taking your course at?
best youtube chanel for hvac!! thanks a lot!! i have question on this video!! the metering device is expansion valve?
In this video, it was just a piston in a piston chamber, thanks
A tx valve or expansion valve is indeed a metering device
Brilliant, great explanation. cheers
Thanks sooooooo much
Love it 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Agree with all comments ..Great tutorial ...love this channel for info on AC
Thanks F M!
Very valuable
Do you have information for automotive HVAC,
I'm looking for it
Great Job!
thanx
hi Thanks for your clear explanation of Refrigerator Cycle. I have one rather important question I would like to ask. Your Airflow where does the Air come from. Is it normally a Close Loop System where the Air is constantly re-circulated by the Evaporator Fan in the Fridge, or is Fresh Air Intake going on so that the Evaporator Fan is constantly pulling Fresh Air from the Outside and blowing it through the Evaporator Coils inside the Fridge. Also if it is not a close Loop System and the Fresh Air is constantly being sucked in from outside , is it vented out as it is recirculated inside and replaced by a fresh stream of air. Thanks
Great explanation.
Why do I always hear “the heat is dumped outside,”” (at the condensing coil). Indicating that the heat you feel from the outdoor unit is from inside the building?
The low side(cool side) absorbs heat from within( for the sake of example) your house. There’s an area where the warm air in your house can contact the evaporator and draw the heat in, thus cooling your house. The refrigerant that has absorbed all that heat from the warm air then travels to the condenser coil, outside, where a fan connected to the unit blows all that out of the condenser. Hence ”dumped” (blown off)it out outside.
This is a very simple and shortened explanation. Any others who read this can give their two cents on my explanation.
Thanks,for another great video.
Thank you very much for your Comment!
Great video
Thank you!
Thanks so much for your competence
Thanks Tracy!
ty
I'm sorry, I really appreciate your magnificent content, but the heat is a result of compression/decompression of the refrigerant gas by the expansion happening in the condenser unit.❤❤
Thanks u sir
All the best
I went to your website and I'm not sure I understand your membership levels. I'd like to donate, but I'm not ready to make an ongoing commitment. How do your levels work? If I donate once is there an ongoing expectation to keep donating?
well explained :)tnx
HI @AC Service Tech LLC What happens if the airduct is partially blocked? Is seems to produce a higher temperature output. Any clues?
Yes
Are their rule of thumbs for ideal condenser, evaporator, discharge and suction temperatures? Would their be a point where increasing evap airflow causes temperature to increase too much? Would their be a point where increasing condenser airflow decreases the gas temp be too low?
Thank you soo much
Thank you for the explanation, can you make a video explain water cooled and air cooled chiller! if you have already made one can you shear the linke.
also interested to learn more about Air Handling unit system.
Life saver
Glad to help!
A Very Good Video!
Thanks you Course Coordinator Applied Mechanics!
Awesome
What would this diagram look if the system was either over or under changed?
thanks so much made it so much easier theory is a pain but gotta know this shit
Wouldn't the condenser fan motor be sucking air through the condenser, not blowing it out. Usually I put a piece of paper on the condenser to see what the fan is on, when it's on it should stick.
This may be stupid as I am only an installer. But if Freon has a lower boiling point, how is it a high temp liquid going into the evap coil, but a low temp vapor. I figured high temp &/ high pressure would evaporate the Freon going back to the condenser