i’ve been trying find a video for ever. i’m not sure if anything’s broken w mine but the window doesn’t open i think it may be off track.but thank you so much man
Hey buddy, thanks for the Video. Do you have a part number? If not no worries I research it, also for a quick fix if window was stuck in the open position, people can easily pull back to window and slide bead off the hole and close window stick something behind it for temporary security until the new regulator arrives. Thanks again
I got to the point of connecting the cable to the sliding window and can put passenger side's "pully" on but the driver's side one wont stretch far enough. It seems to be about 3/4 to an inch too short. How much force did you have to apply to get it on there?
Part number 25782000 I’m trying to find a cable that isn’t 100$ I hear you only need to find the cable and not the whole motor assembly (unless yours is broken of course)
@@Daddy_D2015 You're right about the screws holding down the rear seats. I checked the torque on those screws. I completed the repair jobs a couple weeks ago. The rat window Is running good again. Thanks for the info.
Thank you for the comment slowpra but I replaced them to the right size and if you have any more questions I’m happy to reply to any thing that has nothing to do with the window.
i’ve been trying find a video for ever. i’m not sure if anything’s broken w mine but the window doesn’t open i think it may be off track.but thank you so much man
Same with mine. May be the bead off the cable broke
How did you adjust your cables once the pulley is installed
What kind of window motor does it use.. I have the regulator now I need the motor
I want to put an original equipment power slider.it just has one with a defroster in it now..Can this be done without messing up the wiring?
One of my cables came out, and the other one was still there, but my window was half open. How do I close it. Do I cut the other cable?
Can't get my cable past that metal seat belt loop. It's wedged tight against the bottom of the window track.
Did you ever get it around the bar can the bar come out
good job. about to do mine
If you have any questions let me know. Super easy though
Hey buddy, thanks for the Video. Do you have a part number? If not no worries I research it, also for a quick fix if window was stuck in the open position, people can easily pull back to window and slide bead off the hole and close window stick something behind it for temporary security until the new regulator arrives. Thanks again
Part Number: 19022-01276865
Where did you buy the new regulator.
Advanced auto
I got to the point of connecting the cable to the sliding window and can put passenger side's "pully" on but the driver's side one wont stretch far enough. It seems to be about 3/4 to an inch too short. How much force did you have to apply to get it on there?
Not a lot
How did you get the back seat down?
Unbolt the seat and lift the seat high enough to clear the bracket on the back wall.
Part Number?
How to say thank you idk .... so thank you...
Your welcome.
Part number 25782000
I’m trying to find a cable that isn’t 100$
I hear you only need to find the cable and not the whole motor assembly (unless yours is broken of course)
Where can I get this rear glass setup
Partsgeek.com Part Number: 19022-01276865
But it would have been helpful on showing the steps of removing the rear seats
Should just be a few nuts and bolts, most likely reverse torx, forget the name of them, E14 I think but don't quote me
@@Daddy_D2015
You're right about the screws holding down the rear seats. I checked the torque on those screws.
I completed the repair jobs a couple weeks ago. The rat window Is running good again.
Thanks for the info.
@@miholju how long did it take ya...ive messed with front seats, why I knew. But I still gotta mess with my rear slider.
Yeah that’s my bad. I figured once I pulled it apart I was like ok this will be easy and just started recording
@@dannyfraser8850 all good. The removal of seats easier part, lol. Thanks for vid
It looks good but you really shouldn’t be riding around on 4 donut tires. Get the correct size
Thank you for the comment slowpra but I replaced them to the right size and if you have any more questions I’m happy to reply to any thing that has nothing to do with the window.