Video was easy to follow along with. Was so quick I managed to install it over my lunch break. I mainly chose this tail tidy over all the others because it's one of very few that don't leave your cables exposed and it looks a lot neater than the competition. Feels quality too, somehow very light with no little to no flex. Quality product, might even outlast the bike.
Received my new tail tidy and want to thank you for this installation Video. I am a female rider with a 2023 KTM 890r and REALLY want to install this on my own. I think I can do this!
Well, it took me quite a bit longer than you to install, but I did it. The wiring on my KTM didn’t have the green tag, so I got the blinkers plugged in backwards. Had to remove and reclip correctly. Thanks again for your tutorial Video, so very helpful. I will put in a big plug for you on my UA-cam channel in my next Vid. AmenCornerRider 💁🏻♀️🏍
@@AmenCornerRider glad you got it sorted! By the time we make the video we have already had the bike apart and back together several times, plus the magic of editing helps keep the video time down. Thank you for your support and sharing our product range to other riders!
excellent video, super clear and easy to follow. video wasn't rushed and showed all the important bits clearly. i watched this out of curiosity even though I don't own a 790 duke.
Thank's for the feedback Wallace! It's great to hear we are achieving what we set out to achieve with our video's. All to often you watch a "how to" video and leave with more questions than it answered!
FYI for anyone installing this, you will also need nuts for the end of the bolts that hold the license/number plate on. Would have been helpful if these were provided or it was stated in the video they would be required. Aside from that, simple install and looks great.
I bought one and just recieved it on the mail. This was a really nice tutorial and it took me about 15 mins to install. I really like the looks of this piece mounted on the bike, sturdy construction with a sleek look and with really great quality. Also the lights themselves are bright and clear. Thanks for the video and the awesome tailtidy.
This video helped me make my purchasing decision for my duke 890 fender eliminator. Great video instructions are a big consideration when purchasing products (any kind), so I greatly appreciate this. I’ll be sure to post up pics when I get mine delivered and installed on mustard bike’s socials!
hi guys, can I just say...i picked up an R&G tail tidy today...very similar...but... the R&G one doesn't allow for the discrete hiding of the cabling but instead expects you to just put some heat shrink tube over it, cable tie it to the mounting bracket and then bolt her on.... IMO it looks like a dogs breakfast. I will be returning the R&G and ordering this Mustard one right now!!! Cheers
Hey, thanks for making a good quality product at a decent price point. Well packaged and arrived quickly from Australia to Canada. Installed on my new 890r now just need the weather to warm up!
I get a headlight error on my TFT when indicating left. All the lights and signals work but the TFT just lights up with a headlight warning everytime i indicate... Nice tailtidy tho! I'm located in Aus too.
Hi, nice Tutorial :) Is this tail tidy usable in Austria? Like an E Number on the backlight? Sry 4 bad english :) Greetings from Austria :) (The Cows, not the Kangurus ^^)
@@KTMPoC4K The brake light is included and plug and play. The indicators used are those that come with the bike from the dealership. Regards, Mustard Bikes.
Hi William, if you are in the US then definately. You will need to swap your indicators out for another option. If you have the LED KTM indicators we have had a handful of people have this happen, but it seems to be very random. The bike we designed this product from still runs a stock setup and has had no issues in over a year of running. Our recommendation is to keep an eye on it and if need be swap to some shorter LED indicators if it becomes an issue. That said if you run an aftermarket exhaust or even just a CAT delete this all changes again! Hope that helps.
@@MustardBikes How does a CAT delete change this? I'm asking as a US-based potential customer with an 890 Duke R. I'm considering this kit (great instructions here and nice design) by itself or with a slip-on.
@@DavidSpragg our suspicion is the CAT creates a higher heat build up than an open exhaust. It seems of the handful we have had this happen to, about 2/3 retained the stock exhaust and CAT. As we mentioned it seems to be sporadic though. We have been unable to tie it down to a specific setup and of over 250 units sold we have only had 5 or 6 cases where we have had feedback that the indicators have been affected. Hope that helps!
Hello, could you pleas tell me if this includes a reflector? Which should be necessary for it to be legal. Also, is it 30 degrees tilt or more? Thank you
Hi Davide, we sell the reflector option as a separate part as we have found not all locations require a reflector and not every customer wants to run our reflector solution. By selling it separate we are able to keep our prices lower for those that do not require the reflector or want to run their own reflector solution. Here in Australia the angle needs to be more than 45 degree from horizontal so we work of that as our angle. Most product are around 50-55 degrees from horizontal or 35-40 from vertical. Hope that helps!
Thanks for the video, but would've been nice to see the result of the tail tidy in place, on the bike, with the seat mounted. The image of how the bike looks with it. Thanks
Hi Eduardo, Thanks for the feedback, we'll look into that for our next video. We have plenty of photo's of this product on our website via the link in the description if you still wanted to see some!
@jankie55 unfortunately not. Mounting the plate tucked under doesn't pass design rule requirements here in AUS. As AUS is our main market it didnt make much sense for us to design one that way.
Hi Paul, for U.S. customers this is indeed an issue. You will need to swap your indicators out for another option. If you have the LED KTM indicators we have had a handful of people have this happen, but it seems to be very random. Our recommendation is to keep an eye on it and if need be swap to some shorter LED indicators if it becomes an issue. The type of exhaust used can also be a contributing factor.
Hi there. We have had about 4 people that have experienced this, with different setups on each bike. It seems a decat or most aftermarket pipe generally means this won't result in this happening. The bikes it did happen to had aftermarket exhausts that directed straight at the indicator with a straight outlet (ie not flowing downwards at the exit).
Hi Mikk, why we tried to do something with the original light, nothing was possible that both looked good or allowed a product to be manufactured at a reasonable cost to the customer.
Hi Rajarshi, we don't have the bike in possession anymore. This is something you would have to discuss with your dealer, however usually dropping the bike up to a few inches is possible with suspension mods and seat upholstery modifications. Hope that helps!
nice and all but what in the actual hell is that brake light on the new tail tidy, it looks like some Chinese knock off brand i could get for dirt cheap on Amazon. Id rather have the stock tail tidy than that ugly looking thing
Hi James, we unfortunately don't have the capacity to manufacture our own tail lights to e-mark specifications. As such we considered many aftermarket options and styles to use, taking into account quality, approval and cost. We found this light to be the most appealing without ending up with a product costing hundreds of dollars. Unfortunately use of the stock tail light was not an option, both due to it's size and mounting system.
Video was easy to follow along with. Was so quick I managed to install it over my lunch break.
I mainly chose this tail tidy over all the others because it's one of very few that don't leave your cables exposed and it looks a lot neater than the competition.
Feels quality too, somehow very light with no little to no flex. Quality product, might even outlast the bike.
Thanks for the awesome feedback ArbeeMTB!
I don't even own a KTM, but I still watched the full video. Absolute legend.
Thanks Kevin! We're glad it's at least entertaining, despite my monotone voice ;)
Your product looks so slim and mainly light weight compared to the competition, well done 🏆
Thank you for the kind words!
Received my new tail tidy and want to thank you for this installation Video. I am a female rider with a 2023 KTM 890r and REALLY want to install this on my own. I think I can do this!
We're sure you can! Feel free to email us if you do come across any issues, but with the right tools, it should be a hassle free install.
Well, it took me quite a bit longer than you to install, but I did it. The wiring on my KTM didn’t have the green tag, so I got the blinkers plugged in backwards. Had to remove and reclip correctly. Thanks again for your tutorial Video, so very helpful. I will put in a big plug for you on my UA-cam channel in my next Vid. AmenCornerRider 💁🏻♀️🏍
@@AmenCornerRider glad you got it sorted! By the time we make the video we have already had the bike apart and back together several times, plus the magic of editing helps keep the video time down. Thank you for your support and sharing our product range to other riders!
excellent video, super clear and easy to follow. video wasn't rushed and showed all the important bits clearly. i watched this out of curiosity even though I don't own a 790 duke.
Thank's for the feedback Wallace! It's great to hear we are achieving what we set out to achieve with our video's. All to often you watch a "how to" video and leave with more questions than it answered!
FYI for anyone installing this, you will also need nuts for the end of the bolts that hold the license/number plate on. Would have been helpful if these were provided or it was stated in the video they would be required.
Aside from that, simple install and looks great.
One of best videos ever. I get my new duke this week, so I think I will be a future client of you. Cheers from Spain
Thank you for the kind words!
I bought one and just recieved it on the mail.
This was a really nice tutorial and it took me about 15 mins to install.
I really like the looks of this piece mounted on the bike, sturdy construction with a sleek look and with really great quality.
Also the lights themselves are bright and clear.
Thanks for the video and the awesome tailtidy.
Thanks for the awesome feedback!
I didn't realise you guys were Aussies.. Yay!
I'm planning of buying this bike. This will be very handy. Thanks mate
Any time Fawad! We are based in Tassie...for some people the verdict is still out if we count as Aussies or not ;)
Do need to disconnect the battery?
This video helped me make my purchasing decision for my duke 890 fender eliminator. Great video instructions are a big consideration when purchasing products (any kind), so I greatly appreciate this. I’ll be sure to post up pics when I get mine delivered and installed on mustard bike’s socials!
"The left indicator has a green dot, so be sure to fit it on the right side!" Ha ha!
hi guys, can I just say...i picked up an R&G tail tidy today...very similar...but... the R&G one doesn't allow for the discrete hiding of the cabling but instead expects you to just put some heat shrink tube over it, cable tie it to the mounting bracket and then bolt her on.... IMO it looks like a dogs breakfast. I will be returning the R&G and ordering this Mustard one right now!!! Cheers
We'll keep an eye out for your order and get it sent ASAP for you Mick!
@@MustardBikes Order is in!!! Cheers
@@rooststarfilmsmick4078 much appreciated! Already packed and ready to post with tomorrows mail.
Excellent informative video, thank you!
Hey, thanks for making a good quality product at a decent price point. Well packaged and arrived quickly from Australia to Canada. Installed on my new 890r now just need the weather to warm up!
Thanks for the feedback G! Glad it got to Canada in good time amd the install went well. Enjoy it (when the weather starts warming up that is!).
Great video and good lookin set up👍 cheers
Thanks!
Thanks for that. Great video. Even an idiot like me should be able to get the installation right!
Haha, we're sure your not an idiot...As long as you leave the drills and hacksaws in the toolbox you should be fine :)!
great video , I'm off to the garage!
Very nice tutorial!!
Thank you!
Great demo bud
Thanks Mitch!
Loved this vid. Is the plateholder available in Europe (Germany) too?
Hi Rico, we do not have a distributor in Europe, but do regularly ship to europe via Australia Post.
I get a headlight error on my TFT when indicating left. All the lights and signals work but the TFT just lights up with a headlight warning everytime i indicate... Nice tailtidy tho! I'm located in Aus too.
That’s strange! Not an issue we have come across sorry. I’d double check the connections for the indicators.
Hi, nice Tutorial :) Is this tail tidy usable in Austria? Like an E Number on the backlight? Sry 4 bad english :)
Greetings from Austria :) (The Cows, not the Kangurus ^^)
Hi Mailon2712, the light supplied is e-marked and has an E number printed into the lens. The Kangaroos pass on their greetings to the cows!
Mustard Bikes thank you 😆
@@MustardBikes Does fender eliminator coming with brake light and indicators? Do you guys have that one for sale as well?
Thanks
@@KTMPoC4K The brake light is included and plug and play. The indicators used are those that come with the bike from the dealership. Regards, Mustard Bikes.
Mustard Bikes
Thank you I already place an order. Best regards
Hi there I was wondering if there was any problems with stock exhaust on the 790 Duke melting turn signals
Hi William, if you are in the US then definately. You will need to swap your indicators out for another option. If you have the LED KTM indicators we have had a handful of people have this happen, but it seems to be very random. The bike we designed this product from still runs a stock setup and has had no issues in over a year of running.
Our recommendation is to keep an eye on it and if need be swap to some shorter LED indicators if it becomes an issue. That said if you run an aftermarket exhaust or even just a CAT delete this all changes again! Hope that helps.
@@MustardBikes How does a CAT delete change this? I'm asking as a US-based potential customer with an 890 Duke R. I'm considering this kit (great instructions here and nice design) by itself or with a slip-on.
@@DavidSpragg our suspicion is the CAT creates a higher heat build up than an open exhaust. It seems of the handful we have had this happen to, about 2/3 retained the stock exhaust and CAT. As we mentioned it seems to be sporadic though. We have been unable to tie it down to a specific setup and of over 250 units sold we have only had 5 or 6 cases where we have had feedback that the indicators have been affected. Hope that helps!
Hello, could you pleas tell me if this includes a reflector? Which should be necessary for it to be legal. Also, is it 30 degrees tilt or more? Thank you
Hi Davide, we sell the reflector option as a separate part as we have found not all locations require a reflector and not every customer wants to run our reflector solution. By selling it separate we are able to keep our prices lower for those that do not require the reflector or want to run their own reflector solution.
Here in Australia the angle needs to be more than 45 degree from horizontal so we work of that as our angle. Most product are around 50-55 degrees from horizontal or 35-40 from vertical.
Hope that helps!
@@MustardBikes thank you, yes it does help. I think i will be a client of yours, in the meantime, have a good day!
Thanks for the video, but would've been nice to see the result of the tail tidy in place, on the bike, with the seat mounted. The image of how the bike looks with it. Thanks
Hi Eduardo, Thanks for the feedback, we'll look into that for our next video. We have plenty of photo's of this product on our website via the link in the description if you still wanted to see some!
the best video tutorial
Thank's Tri Fi! Appreciate the feedback.
all ya gonna need is wire cutters, a barby, shrimp and a shit load of fosters
While not essential, definitely things that will make the job easier...
Muy buen consejo gracias
De nada. Me alegro de que haya sido útil!
Do y'all offer a tucked version for the plate? Something that would run the plate along the inside of the fender well?
@jankie55 unfortunately not. Mounting the plate tucked under doesn't pass design rule requirements here in AUS. As AUS is our main market it didnt make much sense for us to design one that way.
Hi great vid will that fit a 2022 790 duke please.
Hi there, yes this unit does fit your model.
Hi guys! Is this usable in Italy? Because I don't see any light for the number plate. Great tutorial anyway
Hi Davide, the LED brake light has a number plate light built in. The light is E-marked.
can you make 790 duke prototype
Is it same on 2020 model?
Hi there, yes this fits the 2020 models including the 890.
@@MustardBikes thanks for the quick reply. I will order one for my 2020 duke 790 which i purchased 2 days ago.
@@Rambonmilo Anytime! Enjoy the new bike, they are a weapon. We'll keep an eye out for the order and get it shipped ASAP for you.
Signal light burn by exhaust? Or not?
Hi Paul, for U.S. customers this is indeed an issue. You will need to swap your indicators out for another option. If you have the LED KTM indicators we have had a handful of people have this happen, but it seems to be very random. Our recommendation is to keep an eye on it and if need be swap to some shorter LED indicators if it becomes an issue. The type of exhaust used can also be a contributing factor.
Does cruise control keep working with this aftermarket brake light?
Hi Max, yes it should keep working. The brake light is on a seperate circuit to cruise control.
@@MustardBikes Thanks!
Hi guis. Any model for original rear light and turn light? Only Powerbronze?
Hi Alex, unfortunately no. Unfortunately due to the size of the OEM tail light and the way it mounts we were unable to re-use it.
@@MustardBikes Thank's 🤙
What is with the heat of the Exhaust? It will not melting the indicator?
Hi Yutani, The indicators are actually further in and higher up then stock, and do not interfere with the outlet of the exhaust. We hope that helps!
100% untrue from mustard bikes, with stock exhaust it completely melted off my turn signal
I think the indicator will melt
Hi there. We have had about 4 people that have experienced this, with different setups on each bike. It seems a decat or most aftermarket pipe generally means this won't result in this happening. The bikes it did happen to had aftermarket exhausts that directed straight at the indicator with a straight outlet (ie not flowing downwards at the exit).
Awesome!
Isnt possible use the original back light?
Hi Mikk, why we tried to do something with the original light, nothing was possible that both looked good or allowed a product to be manufactured at a reasonable cost to the customer.
Can I decrease the hight ..I m 5.4 ft ..wanna buy .previously I had duke 250
Hi Rajarshi, we don't have the bike in possession anymore. This is something you would have to discuss with your dealer, however usually dropping the bike up to a few inches is possible with suspension mods and seat upholstery modifications.
Hope that helps!
Mustard Bikes thank u 🙏🏻
The factory tail is better
I guess that is a matter of opinion. Plenty of people feel otherwise, but indeed for some, the standard tail may be more practical or better looking.
nice video, just tail tidy looks awful
nice and all but what in the actual hell is that brake light on the new tail tidy, it looks like some Chinese knock off brand i could get for dirt cheap on Amazon. Id rather have the stock tail tidy than that ugly looking thing
Hi James, we unfortunately don't have the capacity to manufacture our own tail lights to e-mark specifications. As such we considered many aftermarket options and styles to use, taking into account quality, approval and cost. We found this light to be the most appealing without ending up with a product costing hundreds of dollars. Unfortunately use of the stock tail light was not an option, both due to it's size and mounting system.
What a terrible name for a company though
Gandalf...our family surname is DeJong...Dijon...Dijon Mustard. We actually get a lot of comments on it, so seems to work for us.