OMG - Finally!! A gent that actually knows how to re-build a motor! 99% of You Tubers only disassembly the motors, repaint, and put back together. Brilliant restoration!
Big difference between the before and after shots, its a wonderful restoration. I read through on your clip about these engines and just looking at it compared to B&S, BSA, Kohler etc, these engine exuberate quality and good design. Thanks for posting.
Another outstanding effort!! I dare say, it is well above new in the showroom condition. The gunk in the carb was brought there via the gasoline at some point. So gasoline maybe with a mix half and half with K-1 Kerosene would be the ideal solvent. The varnish is much more soluble in the kerrosene cut or the diesel cut, which is why we never see varnish in the diesel fed engines...
Are those peacocks I hear in the back ground? They make best watch dogs ever they sound off at any intruder. My grand parents had one on the farm when I was young in the 60s
That carb looked rough at first I though that was carbon build up on the choke plate. Wasn't as bad as it looked when you started I though it was junk but it cleaned up great.
Outstanding restoration, I assume this will be used with the air compressor engine. I work in a tyre garage with electric air compressors which knock on and off, how does a petrol one work? Does it run constantly? Again brilliant job , really enjoyed the video's on this👍
Thank you, The gasoline engines have a valve that regulates the rpm of the engine when pressure is reached. Some of them kill the engine if the pressure is reached.
You made it all pretty and it even runs too! I see AJ laser merch in the future maybe? Just wondering, why an oil fill on both sides of that engine? I don't think I've seen one like that before.
First off thank you for joining the channel membership! I really appreciate it!. Thank you for the comment, the double oil fill is so the engine can fit a wider scope of applications. Some lawnmower chassis do not allow you to fill oil on the one side, so honda made a motor that has oil fills on both sides. That allows for better sales also. I have a few Briggs motors here with oil fills on both sides and I love it.
You as I are Fonda of those Hondas here in Putnam county ga (USA) I get ethanol free gas for $3.799.a gallon what's the price for your gas in south Africa. Glad to see you restored. That HONDA YEAH BUDDY 😎👍
Really nice restoration - awesome looking engine! Out of curiosity, would you say the restored engine is close to it's original performance? I can imagine that's asking quite a lot - I don't know if the pistons can hold as much pressure as they did. Really great either way - the thing looks amazing! 👍
@@AJRestoration I really appreciate your focus on functional and aesthetic restoration. Of course I'd love to see this engine back in fighting condition! 😃 But I know you have a lot on your plate!
![Junked Robin EC10 Two Stroke Engine Restoration [Part 1 of 2]](http://i.ytimg.com/vi/N86bevG4c5Y/mqdefault.jpg)
![What's in the box?! 1890s Safe [Restoration]](http://i.ytimg.com/vi/kugqGatwLDY/mqdefault.jpg)
OMG - Finally!! A gent that actually knows how to re-build a motor! 99% of You Tubers only disassembly the motors, repaint, and put back together. Brilliant restoration!
Love when your restorationed engines start 😊
Me too hahahaha
انا جدًا جدا سعيد بعد ما تم تشغيل المحرك وكنت أكثر سعادة بعد طباعة الشعار الخاص بك 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍💐💐💐💐🇸🇦🇸🇦
Good afternoon from Southeast South Dakota with 9 inches of fresh wet ass snow.
Wot a good job mate first class love to see more Videos Dave thanks 👍👍👍👍👍👍👌
Thank you Dave! Much Appreciated.
Big difference between the before and after shots, its a wonderful restoration. I read through on your clip about these engines and just looking at it compared to B&S, BSA, Kohler etc, these engine exuberate quality and good design. Thanks for posting.
Best caution sticker ever on the fuel tank.
Very nice refurbishing project. Looks great and sound good as well. Thumbs Up!
Extremely satisfying!
Yaaasssss!!!!! It runs!!!!!! Awesome work mate!!!
The engraver!!!!! Next level man!
You earned it, you re the best restorator i ve seen in ytb.
Another outstanding effort!! I dare say, it is well above new in the showroom condition.
The gunk in the carb was brought there via the gasoline at some point. So gasoline maybe with a mix half and half with K-1 Kerosene would be the ideal solvent. The varnish is much more soluble in the kerrosene cut or the diesel cut, which is why we never see varnish in the diesel fed engines...
Great restoration job. The laser etched tag is a nice touch.😁👍
Nice restorasion. Very cool little motor. I do alot of gx 390 honda motors. Would love to get my hands on a g150. Thanks for a cool video.
Espetacular restauración! !! Me trajo recuerdos del campo cuando no había electricidad abrazos desde Uruguay
Very Impressive a little motor
Then I finally found a guy who uses gloves when handling gasoline! 👏👏👏👍
😁
Awesome project dude, with a beautiful finish! Keep up the fantastic work! 🍻🤘💜
Thank you Andy! I appreciate the awesome comment!
What a perfect restoration video 👍
Thank you! Cheers!
Nice work 👍.
Thank you very much!
Loved every second. The engraving at the end is Fantastic :) wow
I love the engraving too! Its a fun little toy.
Hello AJ beautiful restoration beautifully restored well done
Thank you very much!
Great restoration
Great restoration. 👍
Thank you Ally! I appreciate it!
''don't be stupit'' is that original sticker
Haha no, its a little something I made.
Excellent!
Loved this restoration. Great job.
Excellent job buddy.
Great job!! Runs well.
0 smoke,excellent!!!
Отличный результат!)
Awesome, i love it, I won't more videos, please come fast next video . Love from india bro.🥰🥰🥰🥰😍
I will try my best haha
Another nice job AJ enjoy your videos.
Glad you like them!
Are those peacocks I hear in the back ground? They make best watch dogs ever they sound off at any intruder. My grand parents had one on the farm when I was young in the 60s
Nice work!
forgot the plate behind the flywheel, where the ignition coil is.. but looks good.
Beautiful restoration. I also was wondering what do you do with these restored things after they are done?
That carb looked rough at first I though that was carbon build up on the choke plate. Wasn't as bad as it looked when you started I though it was junk but it cleaned up great.
that came out well.
Omg what a very very very good Job Love it very top it is your master Work Level 100 really better goas Not more ❤️👍❤️
👍👍
How do you make those new engine tags? The engine model tag and the gas tag label? They're so nice
Great video
Valeu meu querido! Ficou muito bom 👍
Goeie môre AJ jy verneuk my dit is n nuwe motor mooi dag vir jou
Haha baie dankie, die een het bai emooi uit gekom ek moet se
Curious where the decals came from? I have a g150 on an f400 honda tiller. Very nice work.
I took some samples from the internet and made my own in photoshop and had it printed in domed resin stickers by a local company.
@@AJRestoration they looked great. Thank you!
Outstanding restoration, I assume this will be used with the air compressor engine. I work in a tyre garage with electric air compressors which knock on and off, how does a petrol one work? Does it run constantly? Again brilliant job , really enjoyed the video's on this👍
Thank you, The gasoline engines have a valve that regulates the rpm of the engine when pressure is reached. Some of them kill the engine if the pressure is reached.
Tire....
Bravo very nice work!!
Many thanks!
You made it all pretty and it even runs too! I see AJ laser merch in the future maybe?
Just wondering, why an oil fill on both sides of that engine? I don't think I've seen one like that before.
First off thank you for joining the channel membership! I really appreciate it!. Thank you for the comment, the double oil fill is so the engine can fit a wider scope of applications. Some lawnmower chassis do not allow you to fill oil on the one side, so honda made a motor that has oil fills on both sides. That allows for better sales also. I have a few Briggs motors here with oil fills on both sides and I love it.
I like your jobb its grate.🙂👍🏻👍🏻🙂
You as I are Fonda of those Hondas here in Putnam county ga (USA) I get ethanol free gas for $3.799.a gallon what's the price for your gas in south Africa. Glad to see you restored. That HONDA YEAH BUDDY 😎👍
Thank you! We pay about 1.26$ for 0,26 Gallons so that would be about 4 Dollars and 60 cents for 1 gallon of gas.
@@AJRestoration okay thanks for your reply on this matter young man 😎
Missed the piston and rings install
спасибо за хорошее видео
That's alright. We don't need to see anything! LOL
Wow daai engine gaan baie mooi lyk op my grassnyer.🤣🤣🤣
Haha ek sal hom vir jou leen wanneer ek kom kuier!
Porque você faz um vídeo e depois coloca partes que vai ser previsao para o proximo vídeo, faz a montagem do motor restaurado, tem que mostrar tudo
Hi your a good mechanic but why you didn't replace the Piston? I believe that was burned
Could not find spares.
good job :)
Really nice restoration - awesome looking engine! Out of curiosity, would you say the restored engine is close to it's original performance? I can imagine that's asking quite a lot - I don't know if the pistons can hold as much pressure as they did. Really great either way - the thing looks amazing! 👍
Thank you! If the rings would be replaced I think it would be as good as new.
@@AJRestoration I really appreciate your focus on functional and aesthetic restoration. Of course I'd love to see this engine back in fighting condition! 😃 But I know you have a lot on your plate!
Nice Restoration Keep it UP
hey man where did you get all the new gaskets?
If I remember correctly, I made my own.
Nice
Nice restoration job do you sell these little engines or do you keep them
No I do not sell any of my restorations. I might make an exception to my members. but since shipping is such a headache I am not too sure.
Mate did you find this thing at the bottom of a lake?
Could just as well been at the bottom of the ocean haha
Hi, May I know where I can buy the carburetor valve float for this model EG1500 from. Thanks
No idea
Are you going to use this to drive the pump for the compressor?
Yes, I have a few fittings on order, so when they arrive, I will make a build video where the two lost lovers meet again.
Maravilhoso !
It looked like a walmart shopper bought that new.
Thank you, it does look like new, I am really proud of this one.
La parte de ajuste del PMS y las levas no se ve como lo has realizado.
👍
Друг, помоги мне. Поставить цепь на honda g150. У меня в моторе цепь и звёзды, у тебя шестерни. Как цепь поставить скажи пожалуйста.
sounds like a bike?
Una pregunta cuál es la bomba de aceite de ese motor