Benelli TnT 135 Yoshimura pipe install & remapping the fuel injection.

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 151

  • @4N2IN0JA
    @4N2IN0JA 4 роки тому +2

    After watching this I can fly through an installation. I showed this bike to my wife and she is in love. She’s planning on getting one soon, so now I’m scouring UA-cam for videos on the Benelli. Thank you for making this video. I respect your thorough technique and I learned quite a few things.

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  4 роки тому +1

      Thank you, putting out another harley video and then I'll get to the oil change video on the TnT. If you guys are near VA, hit me up for a test ride on mine. Eric

  • @scpatriot4786
    @scpatriot4786 2 роки тому +3

    Great job. Really enjoying your info on the Benelli. More ECU info would be great!

  • @BikesBeardsAndBrews
    @BikesBeardsAndBrews Рік тому +1

    Love me a Yoshi pipe, when I had a ninja I always wanted one but couldn't afford it back in the day. Nice install and great pipe!

  • @Wenda_official_sprunki2024
    @Wenda_official_sprunki2024 3 роки тому +4

    That pipe made the bike look so clean. Great video with good instructions I watched the whole video and I don't even own a Benelli.

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому +1

      Thank you for the kind words!

    • @Jeremy_Behnken
      @Jeremy_Behnken 3 роки тому +1

      Same 😂

    • @tshortbull8683
      @tshortbull8683 2 роки тому

      Definitely a good vid. Is this the only pipe they make? What model? I wanna order. I did not know how to reset the ecu. I replaced the muffler on my scout but didn't reset. Gonna just do that quick.

  • @muhammadsteinberg
    @muhammadsteinberg 2 роки тому +1

    You really got that Wayne's World look down pretty good.
    Great install vid!

  • @EdwardZazzara
    @EdwardZazzara 8 місяців тому +1

    Thanks!

  • @americandad4864
    @americandad4864 2 роки тому

    Did you just chose that muffler because it was the most expensive one you could find ?

  • @andrewwisneski2664
    @andrewwisneski2664 2 роки тому

    Eric how do I reset my ecu the right way I put a kandN cold air intake in 2 days ago

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  2 роки тому

      Disconnect both terminals on your battery and ground out the positive (red) on bare metal on the bike.

  • @akiraproject2424
    @akiraproject2424 Рік тому +1

    Can't find anyone who sells this exhaust. Been looking around for a week or so now. Taking notes on your Benelli videos. Just picked one up 2 weeks ago

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  Рік тому +1

      Congratulations! The Yoshimura pipe was discontinued, so if you find one, it will be used. There's a lot of basic maintenance videos o made on this bike. I hope it helps you.

  • @bakercompanygaming947
    @bakercompanygaming947 2 роки тому

    I would love for you to do a video on a aracer mini 5 ECU. I almost want to buy you one and have you do a video

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  2 роки тому

      Ha! I appreciate your confidence in me. If you get one and do an install and have issues, just reach out to me and I'll do what I can to help. Eric

  • @coopergregory249
    @coopergregory249 2 роки тому +1

    Where can I buy one?

  • @stevensalemi6395
    @stevensalemi6395 3 роки тому +1

    We need to know whether this upgrade was worth the effort and the expense.

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      I go into detail on this. Eric topic on my 1 year review. Check it out here. ua-cam.com/video/sIhn5Z5-YaM/v-deo.html

  • @jeremycubs8331
    @jeremycubs8331 3 роки тому +1

    I don't know why the 135cc isn't available in the UK 😞 we only get the 125.

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      Jeremy, I'm pretty sure it has to do with your motorcycle license level and the 125 fill a spot for beginner riders. It is a shame you don't get the 135. Tha KS for watching and ride swift, ride safe.

  • @nicholasventura4107
    @nicholasventura4107 3 роки тому +1

    Do you have video on rear license remove it

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      I don't and mist likely will not post one. If you remove the ugly rear plate and guard you have no rain protection and will get a strike up your back in wet conditions.

  • @ahmedosmaan9176
    @ahmedosmaan9176 2 роки тому

    my dear please i need your help as my bike suddenly became hyperated and get heated very soon ..i need to reduce fuel injection?? ..how i contact with you

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  2 роки тому

      Ahmed, If it's over heating, check the oil levels fast! It doesn't hold much oil and losing a little will have a huge impact on the heat temps. I would also suggest you join and post your questions on the Benelli TnT forum on Facebook where you will get many replies quickly to get you some help. Eric facebook.com/groups/officialbenelligroup

  • @viciousviolet3783
    @viciousviolet3783 3 роки тому +2

    So what’s your thoughts on this exhaust? Any more power or top speed out of it?

  • @ErKing-zj4pl
    @ErKing-zj4pl 4 роки тому +3

    I have a Yoshimura exhaust on my tnt135. Along with the Chimera intake. Still on stock ecu. No issues. I find the bike more responsive and seems more peppy 👍. You can disconnect both battery leads and just make them both touch for 60+ seconds. It'll reset the ecu that way. Thanks for sharing the video 😎

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  4 роки тому

      Right on! 😎 Thank you for watching and commenting. 🏍💨

    • @SirkuloTV
      @SirkuloTV 4 роки тому +1

      how to do it?
      should i turn on bike while doing it?
      pls teach me

    • @boomerhgt
      @boomerhgt 3 роки тому +1

      It's just louder you just think it has more power it's all in your head

    • @ramangeorge6229
      @ramangeorge6229 3 роки тому +1

      Did you have to get it tuned after? I put on the chimera exhaust header and will be putting in the chinera air intake as well.

  • @darydavid4270
    @darydavid4270 4 роки тому +1

    Wow yoshimura exzos in benelli 135 TNT looks beautiful

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  4 роки тому +1

      Dary David, I like them too! Wherever I go people come up to me to talk about this bike. Thanks for watching brother!

  • @albertollorca5249
    @albertollorca5249 3 роки тому +1

    Removing the huge catalitic converter should have increased your ground clearance. Have you measured to see what your ground clearance is now with the new exhaust? Thanks

  • @MiniMoturd
    @MiniMoturd 4 роки тому +2

    Hey Eric, was wondering if you noticed any gains in power after installing the exhaust? Kind of in the same boat as you, I like my quiet exhuast. But if there was some type of noticeable gain in power I might not be opposed to an exhuast.

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  4 роки тому

      I can't say there was any gains in power but I will say that it smoothed out the power band and got there a tad quicker. I've said I'm going to most likely take it off and sell it. Let me know if you're interested.

    • @MiniMoturd
      @MiniMoturd 4 роки тому +1

      @@KrakensGarageandAdventures Okay, thank you for the input....probably just leave it as is...its like being on stealth mode lol. thanks for offering the exhuast though👍🏍✌

    • @richcaspar1300
      @richcaspar1300 4 роки тому

      Eric, can you tell me the reason you would take it off and sell?
      To loud? Not enough performance difference?
      Thanks
      Rich

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  4 роки тому +1

      @@richcaspar1300 Rich, it's a little too loud for my taste. Astedically I love the look of the Yoshimura. Power deliver is necessarily "more", what it does do is flatten out the power curve so you have more usable rpm range.

    • @boomerhgt
      @boomerhgt 3 роки тому +1

      Kraken's Garage & Adventures I had my new system on for 30 mins and reinstalled the stock way too loud ..ok if your 16 years old but not 64 like me a waste of my money I should know better....loving your videos though awesome

  • @benriding8678
    @benriding8678 3 роки тому +1

    Great video's! Where did you find the black rim decals for the TNT? Thank you.

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      Ben, they came stock on the bike. Mines a 2020. Hit up your local dealer and I'm sure you can order them.

    • @benriding8678
      @benriding8678 3 роки тому +1

      @@KrakensGarageandAdventures will do, I just picked up the same bike & color today. Very excited to get the motor break in period over with!

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      @@benriding8678 congrats! Hit me up if you need help.

  • @larrynorsworthy8582
    @larrynorsworthy8582 2 роки тому

    I just got a 2022 model in the same color. After the break in is done, and after the first service, if it will do maximum rpms in 5th gear, why change anything?

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  2 роки тому +1

      Larry, absolutely nothing to change, The bike is fit right out of the box. I sold that pipe after 100 miles. The noise and vibrations it caused were terrible. Thanks for commenting. Eric

  • @anip1259
    @anip1259 3 роки тому +1

    How long does it normally take for ecu to learn new pipe?

  • @1time39
    @1time39 3 роки тому +1

    Hey great Video!! I’m not sure if it’s available but I’m interested in purchasing your exhaust set up if it’s not already sold??

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      I'll pull it off in the next week or two. Thanks for watching and commenting.

    • @1time39
      @1time39 3 роки тому +1

      No problem.. Keep me updated when ready to sale.. Thanks!!

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      @@1time39 send me an email at krakensgarage@gmail.com

  • @joeypavron7015
    @joeypavron7015 2 роки тому +1

    In my personal observation, the stock pipe still sounds better, so I would still go with the original pipe

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  2 роки тому +2

      I have to agree Joey, the noise and vibrations thidnpipe caused were terrible. I sold it a month later and went back to the stock pipe. Happy New Year!

  • @jakespeed9419
    @jakespeed9419 Рік тому +1

    Looks so clean. I want to get a 135 and the same exhaust!!

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  Рік тому

      Sadly, Yoshimura discontinued these pipes, and you'll have to find one used. Thanks for stopping by and commenting. Eric

  • @toffeeavatar5011
    @toffeeavatar5011 3 роки тому

    How about a 14s sets of wheels maybe? Cheers.

  • @marcd4778
    @marcd4778 4 роки тому +1

    great video... love all the close in camera shots!!

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  4 роки тому

      Marc, thanks for the kind words and watching. Seriously, it means a lot to me. Ride swift, Ride safe. Eric

  • @LUKAS-RACING
    @LUKAS-RACING 2 роки тому +1

    Mine lost power after the Decat :(

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  2 роки тому

      I didn't get any hp gain but got all the vibration and noise so I went back to stock and sold the pipe. I hope you get it sorted. Eric

  • @Evans1091
    @Evans1091 3 роки тому

    I've had the Chimera air intake installed for some time on mine and the ARacer RCmini5 with no issues. I installed the Chimera exhaust header today and now the idle RPMs randomly go up to ~2krpm and back down to around 1.5krpm. What could be causing this? It will stay at around 1.5k like normal and then jump to 2k for a few seconds and go back down. Any suggestions? Only change was swapping the header that caused this.

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому +1

      I think the combination of the pipe and the air intake is most likely the culprit. I think you will need a fuel mapping pack to settle it down. The two changes you've made are out of the fuel mappings capabilities.

    • @Evans1091
      @Evans1091 3 роки тому

      @@KrakensGarageandAdventures do you have the Aracer ECU? If so are you able to send me the MAP or offer any suggestions on what to change?

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому +1

      @@Evans1091 I'm sorry but I do not have one. I'm running a stock air box and pipe. I sold the Yosh as it was way too loud for my taste.

  • @robmcgregor8759
    @robmcgregor8759 2 роки тому

    Hi looks cool, just wondering did you not use paste or sealant when fixing the pipe to the engine?

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  2 роки тому

      Hi Rob, no I didn't. I did replace the exhaust gasket which you should do every time you remove it as it's a crush gasket. Thabks for watching and commenting. Eric

  • @Sealteam556
    @Sealteam556 2 роки тому

    Where I can get my ECU FLASHED ?

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  2 роки тому +1

      You can take it to your local dealer and they should be able to do it. You can try to disconnect your battery cables, hold the positive cable to bare metal and reconnect them. Ride the bike 20 miles and it should learn the new fuel mixture. Eric

    • @Sealteam556
      @Sealteam556 2 роки тому

      @@KrakensGarageandAdventures thank you

  • @drumdriven5460
    @drumdriven5460 4 роки тому

    I put a pipe werx on my tnt 135 but never unhooked the battery or reset anything cuz i didn't know about it. Can i still do? Been a couple hundred miles since i installed exhaust. Thanks luv the videos!

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  4 роки тому

      Drumdriven, you should no issues re-flashing your fuel mapping by grounding out. Good luck!

    • @systemfile
      @systemfile 3 роки тому

      Check your spark plug color to see if you have a lean condition.

  • @owengune
    @owengune 8 місяців тому +1

    Great video🙂

  • @boomerhgt
    @boomerhgt 3 роки тому +1

    Great videos I changed my TNT exhaust a year ago but it was way too loud and not a good loud like my VMax .back to stock a lot easier to live with plus it's not a great idea to get rid of the cat

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому +2

      Agreed, I'm going to pull mine and put the stock back on and sell the Yoshi. Thanks for watching.

    • @603adventures9
      @603adventures9 3 роки тому

      @@KrakensGarageandAdventures I'll buy it

  • @DoRC
    @DoRC 3 роки тому +1

    You actually need to make sure that the positive lead touches the negative lead. Just touching the positive lead to the negative post on the battery doesn't work if the negative lead isn't connected to the negative post of the battery.

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      That's a very good point. Thanks for sharing.

    • @armdrop101
      @armdrop101 3 роки тому

      How do you know it works?? Groms you can see the check engine light lash indicating the reset was a sucess.

    • @DoRC
      @DoRC 3 роки тому +1

      @@armdrop101 it has to work. Basically what you're doing is draining the capacitors inside the ECU which prevents it from continuing to hold on to its memory.

  • @DaveCapamagian
    @DaveCapamagian 3 роки тому

    Hi, thanks so much for all the video's on the TNT 135, these are so helpful for doing the mods on my bike, just amazing. Would you happen to have a wire digram for the TNT 135, I am trying to install the ST2 brake modual and the turn modual and need a wiring digram to complete. Cheers in advance Dave

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      Hi Dave,
      Here's a link to my dropbox with the most current service manual (2021), around page 425(ish) should be the wiring for you bike. Let me know if that doesn't work for you. Thanks for stopping by! Eric. www.dropbox.com/s/j53yc6dukca60g5/Benelli%20TNT%20135cc%20Official%20Full%20Service%20Manual%20%282021%29%20.pdf?dl=0

  • @lokaloka9065
    @lokaloka9065 3 роки тому

    Hi Eric, I want to get that bike I'm 48 years old, and it's my first time to ride a bike, do you recommend it to me? The seat are comfy or not?

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      Loka, I turned 59 last week so I get it. It's ramped as it is a mini motorcycle. The seat is nothing to get excited about regarding comfort. That said to rip around at wide open throttle and not break any laws is a hoot. Would I reccomend it? Yes

    • @lokaloka9065
      @lokaloka9065 3 роки тому

      @@KrakensGarageandAdventures thanks a lot, and good luck on your channels, it's useful.

  • @wearejungians
    @wearejungians 3 роки тому

    Would this be the same for the 2021 version TNT 135?

  • @603adventures9
    @603adventures9 3 роки тому

    Do you have to remap if all's you do is change exhaust?

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      Yes you should and it's super easy. Pull the positive and negative battery cables and ground them out strategy on the frame somewhere.

    • @603adventures9
      @603adventures9 3 роки тому +1

      @@KrakensGarageandAdventures you wanna sell that exhaust buy it today

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      @@603adventures9 I'm sorry it's already sold.

  • @Kris_P._Bey_Ken
    @Kris_P._Bey_Ken 3 роки тому

    At the 7:55 mark, what is the purpose of that spring?

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому +1

      Kris, the actual muller can is only held on with 2 of those springs. Very common on m/c mufflers. It makes it east to remove the pipe to service either the bike, many bikes you have to remove the muffler to remove the rear wheel. (think duel pipes on a bigger bike, one on each side of the rear wheel. Thanks for watching.

    • @Kris_P._Bey_Ken
      @Kris_P._Bey_Ken 3 роки тому +1

      @@KrakensGarageandAdventures so the springs are holding the pipe together at the seam?

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому +1

      @@Kris_P._Bey_Ken Yes.

    • @Kris_P._Bey_Ken
      @Kris_P._Bey_Ken 3 роки тому +1

      @@KrakensGarageandAdventures got it, thanks. 👍

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому +1

      @@Kris_P._Bey_Ken anytime Kris, this is why I started my channel to help riders. Thanks for watching. Editing a "how to " adjust your valves on the TnT tonight.

  • @cathyn1033
    @cathyn1033 4 роки тому

    Great job Eric. Your editing is getting better and better each video. 👍

  • @SGTDuckButter
    @SGTDuckButter 2 роки тому

    You got the last pipe, the links don’t work.

  • @eddies7778
    @eddies7778 Рік тому +1

    Thanks very helpful

  • @RLTW6
    @RLTW6 4 роки тому

    Sounded good before, but better after.

  • @joereed7326
    @joereed7326 3 роки тому

    So has anyone seen a high milage tnt??i I ove em,,4v 5sp,just not geting one till i hear of one whith kms on it ,im in Australia ,very hot,,

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      There's a group on Facebook and a fellow asked that question. I guy replied 40,000 miles! That's not verified but damn!

    • @joereed7326
      @joereed7326 3 роки тому +1

      @@KrakensGarageandAdventures nice one,,,ive seen 15k kms on one at a dealers in Victoria aus,,,thay are a bonkers cool bikes,,,im looking at them,,one thing i hear in is owners of these units should get into rubber mounting every component,black silicone ,rubber washers,,🍀💪

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      @@joereed7326 i agree with the rubber mounting starting with the exhaust. Poke around the FB page and ask the members who has the highest mileage and you'll get answers globally. Good luck and hit me up if you need any help. 🏍💨🐙

  • @cjstennett
    @cjstennett 3 роки тому +1

    Just fyi they discontinued the muffler

  • @Gregs_World
    @Gregs_World 4 роки тому +3

    That really came out great
    fantastic video and audio
    you are really creating a wonderful channel here, Eric
    thanks, as always, for sharing with us

  • @SpikeyOfficial
    @SpikeyOfficial 4 роки тому

    Brilliant vid mate. I just got my new full exhaust fitted and my bike has trouble starting cold. Hopefully this will reset my ECU

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  4 роки тому +1

      Thank you! I hope it helps you, post a comment when you get it installed.

    • @SpikeyOfficial
      @SpikeyOfficial 4 роки тому +1

      @@KrakensGarageandAdventures It didn't work for me but it could be something else. Just not sure what 😂

    • @boomerhgt
      @boomerhgt 3 роки тому

      Spikey Its not worth the hassle man leave the stock exhaust on it's gonna run sweet

  • @MiniMoturd
    @MiniMoturd 4 роки тому

    Awesome man!!!

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  4 роки тому +1

      Thanks for watching and commenting! Means a lot to me.

    • @MiniMoturd
      @MiniMoturd 4 роки тому

      @@KrakensGarageandAdventures Thank you for all the work you do on your videos...very informative and have helped me out a lot. Loving the "benelli tnt 135" and can't wait for the next vid!

  • @CalvynLee
    @CalvynLee 4 роки тому

    Greeting from Benelli TNT 135 / TNT 125... great sharing 👍

  • @succubus1
    @succubus1 Рік тому +1

    ヨシムラ排気音最高!
    日本で売っているのかな🤔

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  Рік тому +1

      彼らはここ米国ではそれを中止しました。私はZX4RRを購入したところですが、ヨシムラは私のバイクに適合するZX25R用のパイプを製造していますが、米国では販売されていません。ヨシムアの非常に奇妙なマーケティング。

  • @importantstuffandothers4579
    @importantstuffandothers4579 3 роки тому

    Man extra detailed job!!!!And yoshimura exhaust looks exxelent, like from its mother.

  • @tjridez6331
    @tjridez6331 3 роки тому

    your video started repeating at 9mins 40 sec

  • @Chalto
    @Chalto 3 роки тому +1

    Great idea to play shitty music over the sound of the exhaust, which is the only reason I watched this video.

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому +1

      Sorry about that Gordon, I had just started my Yt channel and it is bad.

    • @Chalto
      @Chalto 3 роки тому +1

      Ah ok, sorry I was ott , not normally quite such an asshat 😉
      The Benelli is a great little bike though. My son has just got one as his first m/c 😎

    • @KrakensGarageandAdventures
      @KrakensGarageandAdventures  3 роки тому

      @@Chalto Gordon here's a link of the sound bite I took with no music. I hope this helps but the camera never takes a good sound recording. vimeo.com/457570969

  • @kd7129
    @kd7129 4 роки тому +1

    Y M C A 🤣😂

  • @5oja11
    @5oja11 4 роки тому +1

    اسلم ارجوك ان الاسلام هو دين الحق