Use hpde (High-density polyethylene) agricultural pipe and cut it into length, wears much much slower and will give you correct amount of grip for most fun👍👍 (can actually heat up)
You saw it milion times on my vids🤣 the best is when first driver made ma mistake and its way better to be allways close to lead - then crash will be smaller and last thing! Put front bumper becouse Your purple toes will be broken when You decide to park in Your friends back when he spins out🤣
Obviously im not jacob but its been 6 days so i figure id help u out, that doesnt look to be a custom frame, if you want a drift kart, try find an older frame as they have a better steering design (gives more angle) i would recommend an arrow ax5 frame, as thats wot i race and you could easily get plenty of angle outta them by cuttin off the steering stoppers. The newer karts have a really weird steering design, if u want more info lemmi know and i’ll giv u my snap so i can show u wot im talkin about
@@johnkhilling3329 Harbor freight, they are ok stock and will need little modifications but they make plenty of power when you mod them for their price
What's up brother I like to see what y'all are doing getting down-and-dirty in the garage dripping on the asphalt that's what it's all about I'm up here in Detroit Michigan I pray it goes to 12 on the mini bike put a 30 mm mikuni what the 30 jet I got I got a Chinese torque converter for a 3100 stall ark flywheel aluminum Arc aluminum rod 45 tooth sprocket and made some really bars this bad boy does 70 miles an hour and Willie from stop sign the stop sign if I drop the wheels of the ground I can smoke it back tire for almost 10 ft I'm paying it right now 11:49
I've made a Gokart tyre debeader that can be modified to help get the tyres re-beaded' pm me if you're interested in maybe buying one and there Not expensive?
Why TF would you remove the brake pedal?! 🤦♂️ You could have retained the factory master cylinder and brake pedal , and mounted the handbrake up to that. With your current setup, if your handbrake malfunctions, you have no way to stop. The bastardization of purpose built kart chassis is a sad state of affairs :(
@@JacobSherwood Worked so well, you drove through your buddie’s kart. Tie rod clearance shouldn’t be an issue, if you’re not making funky modifications to the steering system. You can adjust Ackerman angle with the different sets of holes on your steering shaft, and front spindles. This will change how subtle or aggressive the front turn in will be. I think you guys are going to a lot of unnecessary trouble that’s not needed to get a kart to drift. I can drift both my 2 stroke karts on regular slicks all day long with no modifications to my chassis or braking.
YTBs! Enjoyed seeing some shed life with the lads and then some drift battles, how good!
Just got a ghost myself after numerous non hemi 212 builds. I love your content and you just scored yourself a subscriber. Great job
I need your secret to the amount of angle you get (for steering), you gotta make a video explaining all the parts you run 🔥🔥
I agree. I just picked up my first race kart yesterday. And i would like to know where you got your parts. Will a torque converter fit your setup
@@ranger6779 uv7v6x
@Lucas Lad whats your instagram?
I'd do 18 degrees of caster. 6-8 camber.
9:48 the secret is the bleu part added in the middle if someone need it
that looks like that spot off off Harris rd. if Im not mistaken
hell yes dude! nice project
How come when putting the plastic over the tires you don’t deflate the tires then slide them on instead of hammering them on. Just curious
They’re deflated af. Tires are hard
sick vid man!
Thanks for the support🙏🏻
Use hpde (High-density polyethylene) agricultural pipe and cut it into length, wears much much slower and will give you correct amount of grip for most fun👍👍 (can actually heat up)
Where do you get hdpe?
Yes❤ tandems❤❤❤ now You know😃
What body do u use for your go kart
One question this gokart or chassi i can buy or you just build that because i seen this gokart in a lot of people
Hey how long do the sleeves last?
The 224 your friend has , just a governor delete , and carb ? How did it compare to the ghost ? Thanks
We have some real tests on the way!
How do you run a shifter on the predator motor???
Please use that corvette bed as a body for a kart that would be sick
what exact pipes do you guys use?
That's awful nice of them. I haven't been able to pay for an accessory kit for 3 months now, hasn't been available within 100miles
I just picked one up last night and I was concerned about the clatter and shaft play. Is yours still running fine?
Ayyy got that harbor freight sponsor🔥🔥🔥
Angle plate left the chat 😂
I never know until I KNOW lmaooo
qual a diferença no tamanho das capas nos pneus?
So you can put on kart rotax engine or kz it will give a lot of power
sick socks bro😂😂
Buy a reverse vac pump from harbor freight makes changing the sleeves down to like 1 minute with no hammer needed
Where did you get your switches and the spot you mount them? Love the Build!!!!!!!!!!!!!🔥🔥🔥🔥🔥
good job i like the go-kart
Do you have to have a clutch
How many inches is the back shaft of your purple cart?
Man this looks just like a spot in Vacaville
hey Jacob, nice videos... where do you get those clutches? I need one for my build. Let us know ahah
I need to get out to cali with my kart and shred with yall
So nice i watched it twice
Hey what size rims and tires do u have on in both rear and front?
Where I can find one
Where did you get the wing
hello brother, what size of wheel, tire and pvc do you use?
Does anyone know how he got is bars purple
How much hp does this engine have
How much for a frame ?
are yall in bako?
What the specs on the kart , I wanna convert a regular old race kart to a drift kart. Awesome vid
haha nice video bro...Me2 i wnt for Kart Racing yesterday..Regards from India..
Почему вы не ставите фильтр на карбюратор туда же грязь летит из под колёс?!
Oo Nice🔥🔥🔥
where do you get your pvc piping? I cant seem to find a place that has big enough pipes. (also the angle plate and kit would be awesome, thanks!)
Did you ever find the angle kit¿
Nice new intro 🙂
What the rear tire diameter?
How often do you switch the pvc’s
You saw it milion times on my vids🤣 the best is when first driver made ma mistake and its way better to be allways close to lead - then crash will be smaller and last thing! Put front bumper becouse Your purple toes will be broken when You decide to park in Your friends back when he spins out🤣
haha youre not wrong. I need to install my front brakes
@@JacobSherwood front breaks will ruin the fun😉
I would DEFINITELY running a air filter
100% upgrade kit install is coming next😎
I have so many questions. I want to build a kart like this so bad but have no clue where to start. Is your frame completely custom?
Obviously im not jacob but its been 6 days so i figure id help u out, that doesnt look to be a custom frame, if you want a drift kart, try find an older frame as they have a better steering design (gives more angle) i would recommend an arrow ax5 frame, as thats wot i race and you could easily get plenty of angle outta them by cuttin off the steering stoppers. The newer karts have a really weird steering design, if u want more info lemmi know and i’ll giv u my snap so i can show u wot im talkin about
What engine plate are you running?
Predator 212cc
@@poppies2009 who's the manufacturer of it?
@@johnkhilling3329 Harbor freight, they are ok stock and will need little modifications but they make plenty of power when you mod them for their price
I think you should make the cart louder and faster
What a crash
Where do you buy the white tihings that make u slide
Bro you should do no pvc drifting i wpuld love to see it
Grip racing vid coming soon!!
show me the beans already!!!
Trying to give it a lil time to break in haha. I'll be abusing limiter after a couple more rides
Could you spend a few seconds and adjust your Helmet Cam so we're not just looking at your feet? Lol.
Hai anna iam Nagendar Anna na age 42 DATESS.MONSTER qualification m.l.t medical lab techniciana ,Srpt lo jobs unte cheppagalaru anna.with govt Jobs
woo hoo
Bro you need to go up a tad in gearing so you can bang limiter 🤘🏻🤘🏻🤘🏻🤘🏻🤘🏻
im sorry but that wasnt a crash that was a bumb and a spin have someone go over the top of u and flip thats a crash
🥰🥰👍👍
0:50
👍
im a day late n a dollar short but yessssirski
What's up brother I like to see what y'all are doing getting down-and-dirty in the garage dripping on the asphalt that's what it's all about I'm up here in Detroit Michigan I pray it goes to 12 on the mini bike put a 30 mm mikuni what the 30 jet I got I got a Chinese torque converter for a 3100 stall ark flywheel aluminum Arc aluminum rod 45 tooth sprocket and made some really bars this bad boy does 70 miles an hour and Willie from stop sign the stop sign if I drop the wheels of the ground I can smoke it back tire for almost 10 ft I'm paying it right now 11:49
I've made a Gokart tyre debeader that can be modified to help get the tyres re-beaded' pm me if you're interested in maybe buying one and there Not expensive?
Why TF would you remove the brake pedal?! 🤦♂️ You could have retained the factory master cylinder and brake pedal , and mounted the handbrake up to that. With your current setup, if your handbrake malfunctions, you have no way to stop. The bastardization of purpose built kart chassis is a sad state of affairs :(
Tie rod clearance is key for these modded drift karts. I also run a 🔥 Wilwood karting master setup that does the job well.
@@JacobSherwood Worked so well, you drove through your buddie’s kart. Tie rod clearance shouldn’t be an issue, if you’re not making funky modifications to the steering system. You can adjust Ackerman angle with the different sets of holes on your steering shaft, and front spindles. This will change how subtle or aggressive the front turn in will be. I think you guys are going to a lot of unnecessary trouble that’s not needed to get a kart to drift. I can drift both my 2 stroke karts on regular slicks all day long with no modifications to my chassis or braking.
@@anthonyincars I’m sorry I no longer argue with race kart guys in my comments. Try PVC then see what you think
Kart Kunjing is no good. It hurts
What a crash
They never look bad but the ankle was definitely bruised