Oh my god, actually a tutorial by someone that isn't talking because they like the sound of their own voice. In tutorial format. Rare breed. Well done...!
Great video, but you did do a small mistake. the wind direction is supposed to be where it comes from not where it goes, so you entered the opposite clock number for that. the reason the shots still hit is the atragmx told you to adjust right and you instinctively adjusted left. just wanted to point that out...
You're wrong. The atragmx says R, as in you have to adjust for the wind going R and move the scale LEFT. I've tried it in the virtual arsenal. Adjusting POSITIVELY for the RIGHT is way off. Adjusting NEGATIVELY for the RIGHT is correct.
No wind direction is input wrong in the video. At 4:10 after he puts in the wind value in the Atrag as 4 oclock (wrong) it shows a POSITIVE windage correction needs to be made. However he actually sets the scope with a NEGATIVE (correct) windage. If he had set the wind in the Atrag correctly to 10 oclock (not 4) the windage would have calculated the NEGATIVE value that he actually used and been correct. Two things you need to remember. 1: the wind arrow points in the direction the wind is GOING not coming from and the Atrag is OPPOSITE it wants to know where the wind is COMING from not going (I know, annoying) 2: For scope windage adjustnemt - NEGATIVE clicks move the crosshair left of target (ie compensating for wind from the left) +POSITIVE clicks move the crosshair right of target (ie compensating for wind from the right.
Great video and I've got a little suggestion to improve its accuracy. The reason your having to flip the wind value the Atrag calculates from + to - when you set the scope is because your setting the wind backwards in the Atrag. Wind direction should be 10 (not 4). This will make the Atrag calculate the correct value and you won't have to flip it when setting the scope. Hope that makes sense
Two Errors: 1. When you input wind speed, in the box labeled "1" is the "low" wind speed and "2" is the "high" wind speed, which means the minimum and maximum of the wind speed if it fluctuates 2. The "Update" button is not needed, as the values in the "abs" column is already the correct value. When you click "update", the value in abs would be put into "Cur", meaning current scope setting, which is just to save your scope setting after you have taken the shot. When you move on to a new target and calculate the adjustment needed, the "Rel"(relative) column would display the amount of adjustment needed from you "Current scope setting" to get to the "Absolute scope setting". This feature is needed only for real life, when there isn't an indicator showing your current scope setting, and you can just follow the "rel" column and turn the knob accordingly.
Chris Waldrop well this kind of sniping is for enemy’s not prepared. If they are in combat they will move around before you get a shot. There is also a stra where you write down the scope alignments in real life so when an Enemy takes cover there you just change scope alignment.
In the Atrag, you have an option in the target tap to adjust latitude and inclination angle. I was wondering what those were used for, when/if I would use them, and how I would find the calculation?
Latitude is real world latitude to counteract the coriolis effect, aka, the spin of the earth. Each map had a real world counterpart, thus use this link for all of the latitudes. github.com/acemod/ACE3/blob/master/addons/common/functions/fnc_getMapData.sqf Being I am still learning marksmanship for my ARMA unit I can't answer the inclination angle specifically, I would assume it has to do with shooting up and down hills. But I don't know sorry.
I have a suggestion for you. Ive been playing a custom scenario called Clandestine Sunrise. Its an old one but supposed to be one of the best out there. It has Zeus so you can customize it further to make a nice story out of it. Might result in a cool video
I'm doing all of these stages with the m24 with the same caliber as in the video and tried with most of the rifle scopes but the bullet hits like a "mile" away anyway, it cal land at the bottom of my scope to the second mils from the center, wtf am I doing wrong?
Hm, gotta make sure to test how different guns work with ACE3. Because guns from some mods do not perform all that well with ACE sniping equipment. Sorry for the late comment
The scope adjustments you make are not equal to meters. If you sniped in Arma 3 vanilla just forget everything you know because the ACE mod is as realistic as it gets. The scope adjustments (either elevation or wind) are MOA adjustments. Those numbers do not equal to meters. So thats why you need to know the rifle, scope and bullet youre using. The scopes in ACE3 are for some weird reason 1/10 MOA adjustments scopes. So for every 0.1 click you are making a 0.10 MOA.. 10 "mini clicks" are 1 MOA. In real life scopes usually are 1/4 and 1/8 MOA Adjustments.. A very important thing to know is the reticle youre using (MRAD or Mildot) as the measurements for shooting slightly vary. The best thing you can do is learn the basics withouth any of that fancy equipment. From 1 to 300 meters its going to be easy to shoot. Beyond that is where it gets more difficult. Grab a range card and understand your ballistics.. See how much your round drops at certain ranges and adjust for windage by shooting and shooting over and over till you have a basic feeling of where the bullet will land. Then proceed to use the Kestrel, Atrax and Dagr.
So in a nutshell.. If you want to snipe somebody with a M24 shooting 7.62x51 M118L at 350 meters away you DONT adjust your elevation to 3.5 moa.. You check your bullet chart and try to remember values for basic ranges from 100 meters to 500 meters. In this case asuming you have windage coming towards you, just adjust to 1.7 - 1.8 (value for 350 meters drop) and aim for where you want your bullet to hit. Done.
@@jordanssfor Sniping in ACE takes some time to set up right which is what I like. It feels realistic, and I usually play the middle ground between all-out sniper and basic rifleman by being a Marksman. I found that I managed to score most hits with my G3A3 (my go-to marksman weapon) by memorizing range values from my range card and adjusting windage accordingly to how off center I hit. The unit I Play with doesnt provide marksmen with the fancy sniper stuff which sometimes sucks but often times makes The experience more enjoyable.
My biggest problem with ace is the moving. Like if my target moves away I can't shoot them anymore because I'll have to re calibrate. Is that as big a problem or no?
Hi. 2022 now happy new year. i folloed your step identical. after an hour of testing. if I take your date I need to subtract one click from distance and for side if on the calculator it says 0.20L i need to put 0.10R (half of the calculator and instead of L, R to be bulleye (target 300m up to 1100m same thing........... what i do wrong???? EDIT: ok after reading the comments, I modify the wind to where is come from, that set. but distance have tendency to be always I tiny bit to high
Hi fairTX, this map looks fantastic, infinitely better to the standard zargabad. I'm looking for maps to make some missions on for a LAN party I'm organising, and this map you played on is perfectly. Apparently it's a map/scenario you were working on a while back? I don't know if you've ever finished it, if you have I haven't been able to find it yet, if you haven't you can know that you have someone who'd eagerly play on such a map, finished or unfinished, it looks great as it is, some great additions I noticed.
I cant hit first shot at 2000m but i would like to, thats why im looking up for Arma3 "Ace" in the first place. A full lenght guide like you said in your describtion would be great that inculdes crosswind, windfactor x1.3, Corioles force or something and the bullet spinn.
How would you adjust for wind on the fly with the range card? I play with a milsim unit and I play as a Designated Marksman. Our rules make it where only actual snipers have an Atrag, and I hear they don't even work anymore. So all I have is a Kestral, vector 21, and a range card. The range card has stuff for wind, but only if it is 4 mps. so lets say I had a target at 600m with a wind blowing east to west at .8 m/s. and for a 4 m/s wind it says adjust 1.2. How would I adjust roughly?
So... My DAGR Wont update the Atrag after i use the vector to detect the range. I also have a different setup on my atrag. The bottom section is different... Any idea why?
Hey mate great video however, I am still a bit confused with all the wind settings? Which wind readings do I need to measure and input into the atrag to ensure an accurate shot?
But I wonder what do you do when the target is on a different elevation and angle from you, because that matters a lot. If youre shooting at a target at 800m on an airfield and another target on the same distance but on a hill, your bullet will hit ether below or above it, simply because the elevation difference and the way a bullets trajectory curves.
well you need to check your keybinding for 'open kestrel' (i think that's how its called) and not 'show kestrel', because the latter only brings it up for a quick check.
thanks for the response. another problem I've encountered, however, is that I do not get the option to "update" the ATRAG as you at 3:02. is this normal?
yes it is normal they remove the update button becase it updates auto no needed and i have a problem how did you set the -1.1 6:04 i mean i dident get it how do you know that ?is marked on the AtragMX .
When i press tab+r the vector only gives me the azimuth, i can't seem to get it to give me range. (yes I connected it to the DAGR, and yes the keybinds for the vector angle and range are tab and r respectively) Edit im stupid and wasn't holding R
Hey for some reason I can't keep my scope still after taking a shot so I can see where the bullet goes, it reloads once shot has been fired And for some reason the kestrel and the atragmx doesn't show up at all My key bindings that I set to the equipment are clear
Hi . Im trying to turn off the movement on the optical crosshairs after i run a few meters. I dont know where to find this. I have stamina turned off in the MP lobby parameters and fatigue is also disabled in the configuration addons ACE Advancet Fatigue . You know how to change it
You can reset the AtragMX to default by typing the following command into the debug screen: call ace_atragmx_fnc_clear_user_data This will restore all the default guns of the Atrag, but it will also wipe out any custom gun that you may have set.
try to experiment with different ammo types, like 12.7x99 because that's .50cal. your other option is to test the range and knobs manually and them write them down for yourself
@@Skyried I'm down to learn that way. don't mind this way (also the best for my spotter) but If I can eliminate some key binds (so im not sitting up on accident or ffs throwing a grenade lol) thatd be a plus.. last thing I wanna do is get my guys killed or need them to set up a rescue team to pull me out.. our milsim units been doing great lately so if I can add an element with your help better understanding how to do these adjustments via pen n paper id greatly appreciate the help and ur time .
No idea, but it's not the first time. As the mods are progressing with updates, a lot of compatibility patches stop working. It will probably be back soon.
fairTX props, AI, player items. I can't seem to edit what my player would have so I just end up playing as one of the npc snipers and I can't edit the items they have as well.
buenisimo video, hasta ahora me vengo a dar cuenta que tenia mas lo de la direccion de viento, lo hacia alreves y aun cuandpo ya eh visto mas tutoriales. gracias
@@OdinBless i mean keeping the scope view perfectly before during and after the shot, not the shot itself, people are routinely hitting 12" clays at 1000-1200 yards now with ballistic calculators with 7.62...
With a clan you need to download hamachi. Basically it lets people join servers and the host do not have to pay for it. I suggest the Memers on discord
oh awesome - haha if you need any help (not sure what I can do to help but it's there if you need it xD ) let me know. I currently run a MilSim/Realism Unit (just started up again), and am implementing an intensive Scout Sniper School. With your permission - I was hoping to utilize it a part of the training phase.
Wait, i remember watching your ACE 3 sniping tutorial back in 2017. Now i come back to realise that's the same fairTX whom'st creates escape from tarkov videos aswell. gg
Further 600m, hit a target in the first shot is almost impossible. The AtragMX is very inaccurated beyond 600m. It gives you plus 2-3 mills above the real measure.
I want to be good enough someday where I can just eyeball the wind and range to about 500m! (this is the part when everyone says, "YEAH RIGHT!" heheh).
Yeah I liked the exile apocalypse beginners guide you did. I'm sure mil Sim guys will see this and appreciate it very much. I know I would if I was to play with those mods.
I'm all up for tactical sniping and all but that seems like a bit much for 1 accurate shot, then having to switch that information for each new target. When crap goes to hell, how the hell are you gonna support ground troops if your busy updating all that information between shots? May as well post something on facebook, maybe twitter, hell, take a photo for Instagram while your at it. I don't get why all this has to be done between shots
Well, mostly because you have a Spotter with you who can do this parallel. But still you need some time to recalibrate. And thats what it is supposed to be. A Sniper is not supposed to kill a unit every Second. It takes some time to land that perfect shot. On the other hand, you can still shoot and than look where the bullet landet and that update on the fly. You won't be much accurate but you can still hit opfor's in a respecatble time.
People play spotters? I mean, as a role in the army that your being paid to do, that's one thing, but people actually enjoy playing them in a video game?
Yes people play spotters. This is how to snipe with maximum precision and use all the equipment. Some steps can be omitted or approximated if more speed is required. (Also if more than one target needs to be engaged in rapid succession it will probably be near the first one minimizing required adjustments) And finally considering the difficulties in engaging a target at 500+ meters a sniper taking a moment to work out his scope adjustment is likely to make the kill faster than a standard rifleman using cruder methods and missing a lot.
Oh my god, actually a tutorial by someone that isn't talking because they like the sound of their own voice. In tutorial format. Rare breed. Well done...!
Appreciate it man, glad you like it!
@@fairTX what map is this ?.
Great video, but you did do a small mistake. the wind direction is supposed to be where it comes from not where it goes, so you entered the opposite clock number for that. the reason the shots still hit is the atragmx told you to adjust right and you instinctively adjusted left. just wanted to point that out...
You're wrong. The atragmx says R, as in you have to adjust for the wind going R and move the scale LEFT. I've tried it in the virtual arsenal. Adjusting POSITIVELY for the RIGHT is way off. Adjusting NEGATIVELY for the RIGHT is correct.
No wind direction is input wrong in the video. At 4:10 after he puts in the wind value in the Atrag as 4 oclock (wrong) it shows a POSITIVE windage correction needs to be made. However he actually sets the scope with a NEGATIVE (correct) windage. If he had set the wind in the Atrag correctly to 10 oclock (not 4) the windage would have calculated the NEGATIVE value that he actually used and been correct.
Two things you need to remember. 1: the wind arrow points in the direction the wind is GOING not coming from and the Atrag is OPPOSITE it wants to know where the wind is COMING from not going (I know, annoying)
2: For scope windage adjustnemt
- NEGATIVE clicks move the crosshair left of target (ie compensating for wind from the left)
+POSITIVE clicks move the crosshair right of target (ie compensating for wind from the right.
Great video and I've got a little suggestion to improve its accuracy. The reason your having to flip the wind value the Atrag calculates from + to - when you set the scope is because your setting the wind backwards in the Atrag. Wind direction should be 10 (not 4). This will make the Atrag calculate the correct value and you won't have to flip it when setting the scope. Hope that makes sense
Is this mission/map on workshop? would love to download, looks the urban setting looks great
Two Errors:
1. When you input wind speed, in the box labeled "1" is the "low" wind speed and "2" is the "high" wind speed, which means the minimum and maximum of the wind speed if it fluctuates
2. The "Update" button is not needed, as the values in the "abs" column is already the correct value.
When you click "update", the value in abs would be put into "Cur", meaning current scope setting, which is just to save your scope setting after you have taken the shot. When you move on to a new target and calculate the adjustment needed, the "Rel"(relative) column would display the amount of adjustment needed from you "Current scope setting" to get to the "Absolute scope setting". This feature is needed only for real life, when there isn't an indicator showing your current scope setting, and you can just follow the "rel" column and turn the knob accordingly.
Doing something that is not needed is not exactly an error.
Best video ever, rn I learnt how to make pretty long shots with those scopes
5:22 coriolis effect is not exist? You are shooting without horizontal correction at 600m?
also tap r twice and let go if you are in a differently angled, elevated position so that the horizontal position is calculated properly.
I am glad your doing all that as a sniper... by the time you get done, I have moved on to the next town.
Chris Waldrop well this kind of sniping is for enemy’s not prepared. If they are in combat they will move around before you get a shot. There is also a stra where you write down the scope alignments in real life so when an Enemy takes cover there you just change scope alignment.
In the Atrag, you have an option in the target tap to adjust latitude and inclination angle. I was wondering what those were used for, when/if I would use them, and how I would find the calculation?
Latitude is real world latitude to counteract the coriolis effect, aka, the spin of the earth. Each map had a real world counterpart, thus use this link for all of the latitudes. github.com/acemod/ACE3/blob/master/addons/common/functions/fnc_getMapData.sqf
Being I am still learning marksmanship for my ARMA unit I can't answer the inclination angle specifically, I would assume it has to do with shooting up and down hills. But I don't know sorry.
Thanks dude!
Dude I didn't know this was you lmao. Been watching your tarkov stuff for a long time now!
I have a suggestion for you. Ive been playing a custom scenario called Clandestine Sunrise. Its an old one but supposed to be one of the best out there. It has Zeus so you can customize it further to make a nice story out of it. Might result in a cool video
ill try it out, sure!
@2:32 isn't the wind direction coming from 12 not 6? Not that it matters as the wind value is 0%
Great tutorial! Thanks for including the keys required!
It doesn't seem like the atrag even works anymore? There's a lot of things just straight up missing on it.
I'm doing all of these stages with the m24 with the same caliber as in the video and tried with most of the rifle scopes but the bullet hits like a "mile" away anyway, it cal land at the bottom of my scope to the second mils from the center, wtf am I doing wrong?
Hm, gotta make sure to test how different guns work with ACE3. Because guns from some mods do not perform all that well with ACE sniping equipment. Sorry for the late comment
The scope adjustments you make are not equal to meters. If you sniped in Arma 3 vanilla just forget everything you know because the ACE mod is as realistic as it gets. The scope adjustments (either elevation or wind) are MOA adjustments. Those numbers do not equal to meters. So thats why you need to know the rifle, scope and bullet youre using. The scopes in ACE3 are for some weird reason 1/10 MOA adjustments scopes. So for every 0.1 click you are making a 0.10 MOA.. 10 "mini clicks" are 1 MOA. In real life scopes usually are 1/4 and 1/8 MOA Adjustments.. A very important thing to know is the reticle youre using (MRAD or Mildot) as the measurements for shooting slightly vary. The best thing you can do is learn the basics withouth any of that fancy equipment. From 1 to 300 meters its going to be easy to shoot. Beyond that is where it gets more difficult. Grab a range card and understand your ballistics.. See how much your round drops at certain ranges and adjust for windage by shooting and shooting over and over till you have a basic feeling of where the bullet will land. Then proceed to use the Kestrel, Atrax and Dagr.
So in a nutshell.. If you want to snipe somebody with a M24 shooting 7.62x51 M118L at 350 meters away you DONT adjust your elevation to 3.5 moa.. You check your bullet chart and try to remember values for basic ranges from 100 meters to 500 meters. In this case asuming you have windage coming towards you, just adjust to 1.7 - 1.8 (value for 350 meters drop) and aim for where you want your bullet to hit. Done.
basically, sniping in ace 3 is a fucking pain in the asssss
@@jordanssfor Sniping in ACE takes some time to set up right which is what I like. It feels realistic, and I usually play the middle ground between all-out sniper and basic rifleman by being a Marksman. I found that I managed to score most hits with my G3A3 (my go-to marksman weapon) by memorizing range values from my range card and adjusting windage accordingly to how off center I hit. The unit I Play with doesnt provide marksmen with the fancy sniper stuff which sometimes sucks but often times makes The experience more enjoyable.
My biggest problem with ace is the moving. Like if my target moves away I can't shoot them anymore because I'll have to re calibrate. Is that as big a problem or no?
it all depends on the wind, if it's blowing over 2m/s, you will have to adjust. otherwise, the target probably wont move too far so you should be fine
Thanks alot , best video i ever seen , better then others you're the best
I love this type of games were you can learn something useful while playing
if you live in the usa it is lmao who doesnt own guns here
Hi can you tell me what the increments are on the scope please, i.e say for 300, 500, and 1000 .
Cheers
Use the range card. It auto configures for your rifle/scope combo. I just found this out and it has helped me tremendously.
Hi. 2022 now happy new year. i folloed your step identical. after an hour of testing. if I take your date I need to subtract one click from distance and for side if on the calculator it says 0.20L i need to put 0.10R (half of the calculator and instead of L, R to be bulleye (target 300m up to 1100m same thing........... what i do wrong????
EDIT: ok after reading the comments, I modify the wind to where is come from, that set. but distance have tendency to be always I tiny bit to high
Hi,
Great tutorial. Could you please share your that training mission ?
thank you sir! even better, give me some time to finish it and it will be a full sniper mission using ACE3. available on workshop soon!
Great, I cannot wait for it :) Can I subscribe you somehow in Steam to know when this mission is ready ?
@@fairTX did this ever make it to the workshop?
Nice one man, im yet to use those mods so was a good education Thanks.
I have a problem with THE menu sometime THE circkle stays and i cant schoot anymore
Hey, how do you take in your ALT and the targets ALT? or more likely how to check theirs?
Hi fairTX, this map looks fantastic, infinitely better to the standard zargabad. I'm looking for maps to make some missions on for a LAN party I'm organising, and this map you played on is perfectly. Apparently it's a map/scenario you were working on a while back? I don't know if you've ever finished it, if you have I haven't been able to find it yet, if you haven't you can know that you have someone who'd eagerly play on such a map, finished or unfinished, it looks great as it is, some great additions I noticed.
I cant hit first shot at 2000m but i would like to, thats why im looking up for Arma3 "Ace" in the first place.
A full lenght guide like you said in your describtion would be great that inculdes crosswind, windfactor x1.3, Corioles force or something and the bullet spinn.
How would you adjust for wind on the fly with the range card? I play with a milsim unit and I play as a Designated Marksman. Our rules make it where only actual snipers have an Atrag, and I hear they don't even work anymore. So all I have is a Kestral, vector 21, and a range card. The range card has stuff for wind, but only if it is 4 mps. so lets say I had a target at 600m with a wind blowing east to west at .8 m/s. and for a 4 m/s wind it says adjust 1.2. How would I adjust roughly?
For some reason my Atrag doesnt have an update button. I wonder if it is because it is automatically updated now?
Yeah im not sure but mine doesn't have it either
It does it automaticly these days.
Ayy, I found a pre Tarkov video for one of my favourite creators while trying to learn a new skill
Hi both future and past FairTx, hope ya good fren
So... My DAGR Wont update the Atrag after i use the vector to detect the range. I also have a different setup on my atrag. The bottom section is different... Any idea why?
pretty sure it's the ACE3 update or something, gonna have to update
Nice vid :D question what building have you used for that sniper nest?
I think it's called Panorak (red). One of those apartment buildings.
Hey mate great video however, I am still a bit confused with all the wind settings? Which wind readings do I need to measure and input into the atrag to ensure an accurate shot?
How do you make adjustments in the hundredths area? (example: 11.55, the last 5) I can only adjust the tenths place. (the 1st 5)
But I wonder what do you do when the target is on a different elevation and angle from you, because that matters a lot. If youre shooting at a target at 800m on an airfield and another target on the same distance but on a hill, your bullet will hit ether below or above it, simply because the elevation difference and the way a bullets trajectory curves.
this helped a bunch !. what map is this takistan?
what are the default keys to change the kestral's screen to user 1, 2 etc? i can bring it up but can't interact with it.
well you need to check your keybinding for 'open kestrel' (i think that's how its called) and not 'show kestrel', because the latter only brings it up for a quick check.
thanks for the response. another problem I've encountered, however, is that I do not get the option to "update" the ATRAG as you at 3:02. is this normal?
hmm... have to check
yes it is normal they remove the update button becase it updates auto no needed and i have a problem how did you set the -1.1 6:04 i mean i dident get it how do you know that ?is marked on the AtragMX .
Do the bullets on this game become less accurate/begin to tumble as they go sub-sonic at super long ranges do you know?
When i press tab+r the vector only gives me the azimuth, i can't seem to get it to give me range. (yes I connected it to the DAGR, and yes the keybinds for the vector angle and range are tab and r respectively)
Edit im stupid and wasn't holding R
Hey for some reason I can't keep my scope still after taking a shot so I can see where the bullet goes, it reloads once shot has been fired
And for some reason the kestrel and the atragmx doesn't show up at all
My key bindings that I set to the equipment are clear
Keep holding left mouse button after the shot (dont just click). As for kestrel and atrag, drop them from the inventory and pick them up again.
fairTX thx man it's working now.
Great videos, I'm just about to watch your new video. Again thx for the help.
you're welcome man.
Can you help me??? My inclination angle does not work correctly. How can I fix this?
When i try to zero the scope it does not allow me to use the wind adjustments too, it uses the default arma zeroing...any suggestions?
yep, not all scopes are compatible with ACE3. for some mods there are also compatibility patches on the workshop
No no no it is not set any buttons for the wind adjustments. You must set it in the settings
Hi . Im trying to turn off the movement on the optical crosshairs after i run a few meters. I dont know where to find this. I have stamina turned off in the MP lobby parameters and fatigue is also disabled in the configuration addons ACE Advancet Fatigue . You know how to change it
orokaki you have to find it in the game difficulty
I think
What's the button to open the scope adjustment menu? (the one with the 2 knob)
Hey what map was this filmed on? it really looks cool I'm Guessing Fallujah?
Can you make another more up to date video? This guide ended where I tried to connect the Vector 21B and it says No device found. :(
know it's a comment from 11 months ago but if you never got it working it has to be the original vector 21
I accidentally deleted a file from the GunList. Any quick tips to restore it?
You can reset the AtragMX to default by typing the following command into the debug screen:
call ace_atragmx_fnc_clear_user_data
This will restore all the default guns of the Atrag, but it will also wipe out any custom gun that you may have set.
cool did not know you also made those kinda videos bout arma 3. Cool stuff!
Please help, when you adjusted the elevation, For me it adjusts the range, not an elevation, please help
That quick 180 no scope though :P
hahah :D
you wouldn't happen to know about any problem with the default zero of the M2010 ESR??? it's always off for a mile high
You got a mission file for this?
What can I do if the ammunition I'm using ( .50 BMG M33 ) isn't on the list ?
try to experiment with different ammo types, like 12.7x99 because that's .50cal. your other option is to test the range and knobs manually and them write them down for yourself
I could also teach you to do it by hand, the only fashioned way with paper, pencil and a range card xD.
@@Skyried I'm down to learn that way. don't mind this way (also the best for my spotter) but If I can eliminate some key binds (so im not sitting up on accident or ffs throwing a grenade lol) thatd be a plus.. last thing I wanna do is get my guys killed or need them to set up a rescue team to pull me out.. our milsim units been doing great lately so if I can add an element with your help better understanding how to do these adjustments via pen n paper id greatly appreciate the help and ur time .
@@phila8627 sure hit me up, pm me or hit me up on discord / steam!
@@Skyried tatt2ed13#9479 is my discord info. I'd be down to pick ur brain when able . tyvm
I have a problem, I can't have the atragx and the kestrel open both at the same time, why is it like that, please help
Show Kestrel instead of Open kestrel
Where's the ACE3-RHS Compatibility patch? Why was it removed?
No idea, but it's not the first time. As the mods are progressing with updates, a lot of compatibility patches stop working. It will probably be back soon.
ahh alright, thanks for the reply.
How do you set this whole thing up? Could you make a set-up video?
you mean the props on the map?
fairTX props, AI, player items. I can't seem to edit what my player would have so I just end up playing as one of the npc snipers and I can't edit the items they have as well.
Followed all steps but theres no "UPDATE" button.
yeah me too
Thank you sooo much this video was very helpful
evan juel you`re very welcome
My ATRAG doesn't have an update button... is it automatically updated I guess?
i couldnt get the kestrel and atrag to stay on the screen at the same time, how did you do it?
search in controls for show atrag/kestrel. cus you can open 1 and show another
Nice video. Thanks for taking the time to make it.
you're welcome sir
Great vid man!. What map is that? Fallujah?
Thanks! It's Zargabad, but I added a bunch of buildings and props :)
ARE SCOPES IN MILL OR JUST MOA?
THANKS FOR ANSWERS
I do not get the update tab on my ATragMX anyone know why?=
Bug Generation Me neither, I'm missing 3 slots. Two in "Lead" and one in "Elevation"
I think its automatically updated
buenisimo video, hasta ahora me vengo a dar cuenta que tenia mas lo de la direccion de viento, lo hacia alreves y aun cuandpo ya eh visto mas tutoriales. gracias
Can someone help me?
When I go page up i get to change the meters for some reason?
You need to use a scope compatible with Ace. All of the RHS ones I've tried are compatible.
cant get my atrag or kestrel to open even when i configured the keybinds.... help ?
it cant be in your backpack, just found out
Does Latitude have much to do with anything?
gonna have to test sir
fairTX okay so I guess it does lol also is there a way to clear the straight after a shot?
What scenario was in the beginning of the video?
mission that i'm making, it will be on workshop soon
You can in todays version of RHS configure that you rebolt manualy
my AtragMX "C1" result to 0.243 .. why? (M118LR)
What map are you playing on?
4:56 you wouldn't normally be able to do this IRL, highly unrealistic
depends, its physics, in our millitary training we shot coins from 800m
@@OdinBless i mean keeping the scope view perfectly before during and after the shot, not the shot itself, people are routinely hitting 12" clays at 1000-1200 yards now with ballistic calculators with 7.62...
@@rfcdgaf yeah, its about stability and calculations
What server can I get into to use this mod?i keep getting kicked🤨
you have to find one with your mods enabled or else it won't let you play
With a clan you need to download hamachi. Basically it lets people join servers and the host do not have to pay for it. I suggest the Memers on discord
How is your cursor free to just click on stuff?
Nice goo presentation and final show
I cannot find keybinds that work. Does anyone know what it is?
What mod is that rappel thing cause that looked epic!
Use with scroll wheel, enjoy
steamcommunity.com/sharedfiles/filedetails/?id=730310357&searchtext=advanced+urban
Cheers, Great Tutorial by the way.
My kestral keeps dissapearing after 2 seconda when i show itnin the corner
i can not change the zeroing on my scopes...
Can we download some training missions?
what map?
Takistan i guess
Very good video but i dont have that update button on the Atrag
Quick and detailed, nice
What map are you on? (that's a very detailed room O.o )
Skyried i made that for a full scenario. it will be finished soon i hope
oh awesome - haha if you need any help (not sure what I can do to help but it's there if you need it xD ) let me know. I currently run a MilSim/Realism Unit (just started up again), and am implementing an intensive
Scout Sniper School.
With your permission - I was hoping to utilize it a part of the training phase.
Did u upload the tamplate yet ?
Wait, i remember watching your ACE 3 sniping tutorial back in 2017. Now i come back to realise that's the same fairTX whom'st creates escape from tarkov videos aswell. gg
4:55 Rebolt*
Oh cool, I'll remember the word :D
Is the map ready to play?
soon, was busy with some other stuff
Can you give me pls the map in this version maybe private?
The add-on no longer exists. What do I do?
6:28 - this talib was wake up for a short while xd
Further 600m, hit a target in the first shot is almost impossible. The AtragMX is very inaccurated beyond 600m. It gives you plus 2-3 mills above the real measure.
Henrique Giffoni this mod is anoying af it says I have to turn it up to ten where I can hit it at one no joke I hope I can get a handle of it
I want to be good enough someday where I can just eyeball the wind and range to about 500m! (this is the part when everyone says, "YEAH RIGHT!" heheh).
It's doable.
I made it 3.5 min. just couldn't do it. you guys who play this are some serious fellas. wish u all the best. just not my cup of tea.
oh but, i don't play milsim :) but i like to know stuff :D
Yeah I liked the exile apocalypse beginners guide you did. I'm sure mil Sim guys will see this and appreciate it very much. I know I would if I was to play with those mods.
thank you sir!
What map is this?
Zargabad, part of CUP terrains :)
fairTX thanks
how is the mod call?
How to remove ace3 balistics?
Outro song name pls?
I'm all up for tactical sniping and all but that seems like a bit much for 1 accurate shot, then having to switch that information for each new target. When crap goes to hell, how the hell are you gonna support ground troops if your busy updating all that information between shots? May as well post something on facebook, maybe twitter, hell, take a photo for Instagram while your at it. I don't get why all this has to be done between shots
Well, mostly because you have a Spotter with you who can do this parallel. But still you need some time to recalibrate. And thats what it is supposed to be. A Sniper is not supposed to kill a unit every Second. It takes some time to land that perfect shot.
On the other hand, you can still shoot and than look where the bullet landet and that update on the fly. You won't be much accurate but you can still hit opfor's in a respecatble time.
People play spotters? I mean, as a role in the army that your being paid to do, that's one thing, but people actually enjoy playing them in a video game?
Yes people play spotters. This is how to snipe with maximum precision and use all the equipment. Some steps can be omitted or approximated if more speed is required. (Also if more than one target needs to be engaged in rapid succession it will probably be near the first one minimizing required adjustments) And finally considering the difficulties in engaging a target at 500+ meters a sniper taking a moment to work out his scope adjustment is likely to make the kill faster than a standard rifleman using cruder methods and missing a lot.
yeah, it's called roleplaying, and it's actually pretty fun
Can you link the map?