Great build. Do you notice any unwanted noise or ripple in the music? If so you could add extra (2) 50v 4700uf capacitors in parallel and a 60v 1uf filter capacitor at the output of the boost, but honestly I would rather go with a 6 or 7S 2 to 4P battery pack and use a good quality buck or even a buck / boost (SEPIC) converter with a Current adjustment as well as a voltage pot CV / CC and use the same idea with the capacitors to eliminate ripple and noise or just use the 18.5v and a buck for the Bluetooth. I never liked the idea of AC to DC or DC to DC converters with audio, but great for charging batteries.
as always you worked very well. I think it's very good if you make more of these videos. Reuse old things as the palette is great. You do a lot of work with your videos, very well produced.
Well done. Took your time, pre-drilled all the holes, thought through the component layout inside the box, worked the wood properly and cleaned up the rough parts. So many DIY speaker videos are hard to watch because the builder isn't careful with what they're building.
Not jealous as such, good for him !. but as soon as it got to the planer thicknesser at the start though, I thought... well, that's me buggered then :O) Great looking and sounding speaker though huh !
Trabalho simplesmente magnifico, do começo ao fim de materiais velhos, reaproveitaveis e finalizando com um tecnologia em todos os itens e um som de excelênte qualidade! Parabens pela competencia.
Hi, I always try to learn and learn and always do the cleanest work in construction and repairs, and I have to admit that I was very happy to see this video and show your art, and I give you a score of 100. like
Полностью согласен, такой хендмейд, столько работы сделано, а еще и все это записать и смонтировать! Очень круто! Интересна стоимость сего девайса хотя бы по себестоимости...
@@vladimirnikitin2121 себестоимость при наличии оборудования копеечная, если конечно динамики или усилитель не стоят астрономических денег, а так трубу ПВХ найти на помойке можно, там же дерево с палета, траты только на эпоксидную смолу, клей и может лак(или морилка, если вы решите сделать её красивой, самое главное это нужно оборудование, тк сделать доски ровными без машины из начала видео(через которую он прогоняет все доски) будет практически невозможно
@@kiellaxpro364 да причем здесь нахрен оборудование? вся обвязка стоит безусловно денег. и динамики и все платы.... вот теперь не поленился. только динамики стоят 6к. я думаю итог превысит 20к только по оборудованию. ПВХ труба, палет, эпоксидка, клей морилка да серьезно чтоли?
Красиво. Но антенну блютуз можно было внутри колонки расположить, деревянный корпус для неё не преграда.😂😂... На пикнике в лесу её можно легко отломить...
@@Уссурийскийтигр-д5у изготавливая акустику прикручивать саморезами так себе затея, зачем тогда клеить корпус было? Два низкочастотных динамика в одном корпусе вообще лажа, ещё и фазоинвертор один на два канала, причем никто его не рассчитывал, это факт.
@@IoannHammerFall Это просто переносная колонка для простого люда, а не HI-FI стерео для ценителей, это понятно. Просто человеку захотелось сотворить своими руками.
Nobody would buy this BT audio box. Just check the price of the materials .... After tax and some minimum wage, this speaker goes for something like $1000 ...
WOW! Not your first rodeo! I love your attention to details of vibration and buzz control in cabinet...Also your choice of changing cap and such was spot on!!!!! WTG! Cheers!!!!
Really impressed with how nice the finish and attention to detail was on your build - very clean! I also liked that you made really good effort to seal the various areas from air leaking through the gaps which really helps improve a speakers performance. Liked your Video! - MM in Denver
Hello Sr, Thank you so very much, for this video, i recognize your job...It is with passion, really... I do not have all your tool to made it myself, I would...of course, but the point is , that I want to express my fellings about your job, IT IS GREATE, with LOVE and apassionate... Thank for share it...Bye
@@airman8558 Ага, и встанет такая колонка тысяч в 200, с учетом покупки распиловочного станка, рейсмуса, торцовочной пилы, фрезерного станка, сверлильного станка и всякой мелочевки 😂😂😂
you are genius man , I want to buy these speakers but I want to add mp3 decoder with am fm an sw1,2 ,3,4,5,6,7 with recording feature and mic and mixer , thanks
Exactly why would I do that myself when I could just buy one like it. buying the parts to build it would probably cost just as much as it would to buy a speaker like it LOL
@@Marlington mano qualquer um que mexa com som ae na sua cidade faz só que vai sair meio caro vi o valor das peças nenhuma fica abaixo dos 30 conto fora a mão de obra do companheiro quem faz móveis tem todo esses equipamentos ae aqui na minha cidade o cara que fazia foi preso
без обид конечно,но JBL это полное говнище для пиздюков и как ты не скажешь за эти деньги, 7к за 2 динамика в пластиковом корпусе, а тут чел собрал полноценную трёшку, пусть из досок, он бля даже сделал для сч отдельные короба и звукопоглатитель, у нас заводские колонки так не делают, а люди покупают и хавают это дерьмо и согласен с тобой, за DIY лайк))))
Great work, definitely, the downside : first of all the tools (they cost much) and am assuming around not more than 8 hours of work not including waiting time for the glue, and the approximate of $250 US dollars for parts. Sure a challenge for whoever looking to build something himself.
в принципе да, из сосны короба делают, а из ели вообще пианинки всякие))) а поддон вполне себе стабилизированая древесина(сарказм))) но сделано очень, доски от поддона как раз винтажности придают
@@Alex_Ryab бубнилка это в магазах продают , китайские жбл . а тут как не крути стерео и трехполоска. короб рассчитывать и делать под какието басы нет смысла , размер не тот .. а сам короб сделан правильно
Hi friends! Would you like me make more video like this?
Great build. Do you notice any unwanted noise or ripple in the music? If so you could add extra (2) 50v 4700uf capacitors in parallel and a 60v 1uf filter capacitor at the output of the boost, but honestly I would rather go with a 6 or 7S 2 to 4P battery pack and use a good quality buck or even a buck / boost (SEPIC) converter with a Current adjustment as well as a voltage pot CV / CC and use the same idea with the capacitors to eliminate ripple and noise or just use the 18.5v and a buck for the Bluetooth. I never liked the idea of AC to DC or DC to DC converters with audio, but great for charging batteries.
You are the best please make more speaker build videos like this
as always you worked very well. I think it's very good if you make more of these videos. Reuse old things as the palette is great. You do a lot of work with your videos, very well produced.
Absolutely
Excelente, mas videos asi por favor!!!
Well done. Took your time, pre-drilled all the holes, thought through the component layout inside the box, worked the wood properly and cleaned up the rough parts. So many DIY speaker videos are hard to watch because the builder isn't careful with what they're building.
Thank for your comment.
No words expressing my feelings... you a Genius man... hats off! Much love, God blessed you!
Thank you!
I can hear the crickets in the background towards the last half of the video. We appreciate you working late into the night to give us this!
How many of you are watching this while lockdown?
Из России тоже наблюдают..
Me,Nagaland
I guess only you
Я из России. Северный Кавказ. Тоже смотрю.
@@pcgamex912 I guess u watched it too
Anyone who is jealous of seeing his work equipment? All new.
Not jealous as such, good for him !. but as soon as it got to the planer thicknesser at the start though, I thought... well, that's me buggered then :O) Great looking and sounding speaker though huh !
さ
Trabalho simplesmente magnifico, do começo ao fim de materiais velhos, reaproveitaveis e finalizando com um tecnologia em todos os itens e um som de excelênte qualidade! Parabens pela competencia.
Congratulations friend .. rescue abandoned wood from a pallet and do a magnificent work. A work of masters👍
That is so satisfying to watch, I missed building stuff and watching this gave me a bit of satisfaction. Thank you.
The box build got my thumbs up, but the component swap out at the end got my subscription. Great vid.
:O I like how it looks, it is a first class job, they made me want to do one, then I remember that I don't have the tools or the money and it passes.
you can get the wood cut from a timber/ply store easily
Or get a very cheap china box out of wood and the tech he used
@@rolandsequeira the LP
@@rolandsequeira yed
I don't know why so many dislikes, your work is very professional, impressive
Simply jealousy, hes all Makita :) great video
Hi, I always try to learn and learn and always do the cleanest work in construction and repairs, and I have to admit that I was very happy to see this video and show your art, and I give you a score of 100.
like
hi alireza i think in this site u will find what u loooking for . i foung on internet and tried . there is 16000 wood working idea thx me later
я в восторге от видео, с какой же любовью все сделано! Великолепно! однозначно лайк!
Полностью согласен, такой хендмейд, столько работы сделано, а еще и все это записать и смонтировать! Очень круто! Интересна стоимость сего девайса хотя бы по себестоимости...
@@vladimirnikitin2121 себестоимость при наличии оборудования копеечная, если конечно динамики или усилитель не стоят астрономических денег, а так трубу ПВХ найти на помойке можно, там же дерево с палета, траты только на эпоксидную смолу, клей и может лак(или морилка, если вы решите сделать её красивой, самое главное это нужно оборудование, тк сделать доски ровными без машины из начала видео(через которую он прогоняет все доски) будет практически невозможно
@@kiellaxpro364 да причем здесь нахрен оборудование? вся обвязка стоит безусловно денег. и динамики и все платы.... вот теперь не поленился. только динамики стоят 6к. я думаю итог превысит 20к только по оборудованию. ПВХ труба, палет, эпоксидка, клей морилка да серьезно чтоли?
@@vladimirnikitin2121 в описании ссылки на комплектующие
@@redanymusic ну вот и откройте их. Посчитайте. И не пишите глупых, очевидных ответов
So nice to work on this kinds of project when you have the complete tools to assist you. nice video.
the Knowledge and the Tools :) greetings from Peru
After the cap replacement the woofers started dancing. Good job bud. I love your final work.
Sir, as an audio/visual technician i have to say.. thats a pretty solid job done there! Congrats! nice job!
i'm really impressed by one touch soldering, just wow!
This video just goes to show that if you have great skills, lots of free time & expensive tools - you can save money. Who knew?
It's not all about saving money. It's pride in your own workmanship. And it can all be done without the expensive tools.
I don't know if I would call it saving money he has $350aud just in parts let alone the time to do it
@@miltonb4522 Exactly! Each side job I pick up a new or "new" to me tool or bit to make the next job easier.
A very nice job of working with your hands to build the cabinet and then also complete electrical knowledge in putting together the electronics.
Красиво. Но антенну блютуз можно было внутри колонки расположить, деревянный корпус для неё не преграда.😂😂...
На пикнике в лесу её можно легко отломить...
а розетку в лесу ?
@@sergeytsobenko2023 аккумулятор внутри колонки
@@sergeytsobenko2023
Там же аккумулятор есть...
Иначе смысла в этой машине нет.😂
Quarantine got us watching some pretty ramdom things 😂
Truth lol
😂
Yes but this video is pretty interesting.
nola
.
Как хорошо, когда инструмент супер и руки прямые! 😁🔊👍
Только не в этом случае
@@IoannHammerFall А что не так то?
@@Уссурийскийтигр-д5у изготавливая акустику прикручивать саморезами так себе затея, зачем тогда клеить корпус было? Два низкочастотных динамика в одном корпусе вообще лажа, ещё и фазоинвертор один на два канала, причем никто его не рассчитывал, это факт.
@@IoannHammerFall Это просто переносная колонка для простого люда, а не HI-FI стерео для ценителей, это понятно. Просто человеку захотелось сотворить своими руками.
@@Уссурийскийтигр-д5у ну так сотворил, молодец.
Maganda na ang pagkakagawa pulido na mkikita mo ika nga Quality pra skin 100% sana mkabili ako sa inyo niyan palo china wood bluetooth speaker ayos 👍👌
You brother should do this for a living. Simply amazing.
Nobody would buy this BT audio box. Just check the price of the materials .... After tax and some minimum wage, this speaker goes for something like $1000 ...
@@cenariusbg sadly the world we are living in is so buy and throw...
@@AntonySimkin No, paying $1000 for this is stupid :) It has nothing to do with buy and throw.
@@cenariusbg but where did you get this number?
@@AntonySimkin I opened all the items in AliExpress and calculated the price.
This is first video in my life i watch the whole video from 00:00 to 29:44
Amazing Bro 🔥
Thank you!
You have made good use of scrap wood!
and other stuf he is smart man
;ln. fvvb by ac8
How much cost
កធថចម
This wood isnt so bad, it carrys millions of dollars of products. :)
Maybe the best DIY video for speakers in youtube. Great outstanding work.
Thank you!
Trabalho excelente do profissional, sabe muito usar cada ferramentas, uma benção!!!🙏🙌
Cleanest wooden bluetooth speaker build I have ever seen, good job☺☺☺
Thank you!
@@KingMinhvuongsir, the moment you tied those wires with zip-tie you just got a subscriber. 😎👍 Good work keep making stuffs like this.
@@KingMinhvuong
ฝ
ส.ฝฝ
ฝ
ฝใใใฝฝฝ
Take my money, bro. Great job.
WOW! Not your first rodeo! I love your attention to details of vibration and buzz control in cabinet...Also your choice of changing cap and such was spot on!!!!! WTG! Cheers!!!!
When you have all of equipment you can make some special stuff. Hope someday i can have wood workshop with all equipment.
you should see what the japanese can make with hand tools!
Отличная работа но меня больше поразило что,ПИПЕЦ у него инструментов дома,я офигел,чего только нет..
Я тоже на это обратил внимание , слюной разов восемь давился :)))
@@НиколайВасильченко-т7ц во во и я о том же)
I love the fact that you show cleaning also after you made a mess- lol
@Me Youkjkkjkkkkkkkkkkkkikkkkikikkikikkkkkkkkkkkikiikkkkkkkk9k9k
9999999999
p00ppp9999999000000
0p09
Amazing
Looks and sounds great. I guess with all the electronics you had to buy it's good that you saved money on the wood!
brilliant! Just one suggestion, sticky pads on wood will probably come loose at some point. I recommend a different approach!
Super Glue better . Hot glue. You made a Beautiful Speaker.
Alternate title: "See how many different woodworking bits I have!"
No
they are very cheap these day's , cost me a small fortune 30 years ago!!!
😘😘😘😘😘😘
Wonderful! I liked the whole assembly process, the organization, the quality of the components!
Thank you!
So far…I’m loving the edits!! Nice work! Still watching…
Thank you!
Really impressed with how nice the finish and attention to detail was on your build - very clean! I also liked that you made really good effort to seal the various areas from air leaking through the gaps which really helps improve a speakers performance. Liked your Video! - MM in Denver
Incrível! até compraria ficou muita linda a caixa 🇧🇷
Hello Sr, Thank you so very much, for this video, i recognize your job...It is with passion, really... I do not have all your tool to made it myself, I would...of course, but the point is , that I want to express my fellings about your job, IT IS GREATE, with LOVE and apassionate...
Thank for share it...Bye
Thank so much!
@@KingMinhvuong nice job my friend im impressed!!
2 pis my order
hkglulm
I like the natural sound of your chickens.
1:40 finally, I see someone that wishes to keep their fingers around.
Такое впечатление ,что все оборудование было куплено специально для съёмок фильма, новое и не разу не использованное.
Непонятно, чем мешали сучки? Лучше дыра на передней панели!
@@serhiikharchuk1657 дерево немного подсохнет, а вибрация (со временем) заставит сучки плясать под музыку, из-за этого появится не приятный дребезг.
Вообщем тоже думаю такого плана себе сделать, деревяхи есть, осталось только всех этих циркулярок накупить и можно приступать😊
Странное впечатление.Конечно всё было подготовлено.
@@airman8558 Ага, и встанет такая колонка тысяч в 200, с учетом покупки распиловочного станка, рейсмуса, торцовочной пилы, фрезерного станка, сверлильного станка и всякой мелочевки 😂😂😂
Fresh wood would have been the least expensive part of this build.
Very inspirational great video and product WOW
Perfect job man.... Music please..... 1 =ON&ON song.... 2= alone by marshmellow.... Thanks
Me, maybe i can build this speaker, then he pulls out all those tools and im like wtf, holding a screwdriver and a pair pliers. 😂😂😂
you are genius man , I want to buy these speakers but I want to add mp3 decoder with am fm an sw1,2 ,3,4,5,6,7 with recording feature and mic and mixer , thanks
wow verry nice ,ang ginawa mo jan , napakalinaw jan ang tunog ser,
This kind of video makes my day so very inspiring. Amazing creativity. Kudos to the creator! 👏 🔊
Хоть я и в электрике 0 )) но на одном дыхании просмотрел .Красавчик
скажу больше -меня застегнуло и я буду делать эту херотень !!! знать бы на верняка ,что не будет диссонанса ..
I think you can make it yourself, just loook and learn from woodprix instructions .
Excellent piece of work. I would like to see an underwater speakers.
Projeto lindo!!! Muito TOP!! Parabéns pelo trabalho e pela ideia!! Parabéns!
Amazing job man I love all the handcrafted wood part and the electrical one. Make more videos
Just watching this to pass time because my state is in lockdown. ROFL
Same here bro😅
@@vivekpatil682 haha
same situation here too
iam tamilnadu corona attacks
same here
I'm from India my friend your a gift this world how can you do you did becomes more better ideas wow .... I really appreciates.👏👏
As much as how good this looks . Thank god we have amazon
Cuando yo estudié sistemas de audio, aprendí una constante: las bocinas para bajos, mientras más grandes, mejor, sin límite.
Великолепно. Я тоже думал сделать что то подобное но только из цельного ствола дерева Кедра.
И украсить камнями от сваровски!
Interisting to see he used the good Homepod high excursion woofers! NICE!
Maybe use them in more projects! Would be nice.
Who played 2x?
Me
Yea friend,wish I had all the tools that you have so I can share my craftsmanship with others
You can manage to get those yourself soon or late. The most important thing is your passion.
Very popular excuse I've also used. :-)
Reply
That looks beautiful, but way to complicated for me to do myself
Just buy one lol
Exactly why would I do that myself when I could just buy one like it. buying the parts to build it would probably cost just as much as it would to buy a speaker like it LOL
Excellent work must always be recognized and differentiated as such. Brilliant job!
The "How to have a dream and give it up within an hour" series.
ua-cam.com/video/tm56_8MPvrA/v-deo.html
its how to make speaker (with skill) 🤣🤣🤣
Hi, this is a high quality DIY BT speaker. Thanks for sharing
Thank you!
Скоро весна , вот молодец уже скворечники строит.
Ахах)))
凄い、凄すぎる
スピーカー制作の動画何本か見たけど、
こんな事ができる人がいるんだと、感動です‼️
出来れば、使った部品のリストや使用目的など公開してほしいです。
since it is a device designed for transport, it would take speaker protection grilles.
I think it's safe cuz the cones are sink in
not necessary if they are indented
Definitely need some speaker grills .led will make it look modern. Good job though
Quanto tá uma caixa dessa preta
Fascinante o trabalho, parabéns pela dedicação!!!
This is great, thanks for sharing. Are you located in Vietnam? Thanks!
A này VN thì phải
Anh này là Việt Nam! Tên Minh Vương nhé
Anh Minh Vương ở đâu ở Việt Nam? Mình thì ở Hà Nội, nếu gặp được thì hay quá!
It's like science and craft woven together... It takes a lot of hard work and patience and creativity... Thanks for the idea... Loved it...
12:15-12:17 relax sound, need 10 hours version -_-
🤣🤣🤣
É, ficou muito bom, más com todas essas ferramentas novas de qualidade fica fácil né.
Pois é cara, maquinários de primeira a um preço acessível, falantes tbm.Aqui no Brasil só podemos olhar, quem teria todo um maquinário desse?
@@Marlington o jeito é encomendar do cara kkk
Já trabalhei com essa máquina verde faz um barulho do crl
@@Wevertonwj Vcs conhecem alguém aqui no Brasil que possa fazer um projeto desse? Sou da Bahia.
@@Marlington mano qualquer um que mexa com som ae na sua cidade faz só que vai sair meio caro vi o valor das peças nenhuma fica abaixo dos 30 conto fora a mão de obra do companheiro quem faz móveis tem todo esses equipamentos ae aqui na minha cidade o cara que fazia foi preso
Great Stuff. Great Skill. Thanks so much for sharing with us.
Kênh diy loa đỉnh cao chắc là nhất vn . Chỉ xem video của bác giờ e đang bắt đầu nổi máu rồi. Hi
Это конечно всё хорошо, но за эти деньги, можно купить оригинальную колонку JBL. И не париться.
Но за DIY однозначно лайк.
без обид конечно,но JBL это полное говнище для пиздюков и как ты не скажешь за эти деньги, 7к за 2 динамика в пластиковом корпусе, а тут чел собрал полноценную трёшку, пусть из досок, он бля даже сделал для сч отдельные короба и звукопоглатитель, у нас заводские колонки так не делают, а люди покупают и хавают это дерьмо и согласен с тобой, за DIY лайк))))
next:
DIY yatch using pallet wood
wowbnice
I love your work, I still hope you can make a modification of the logitech z506
Thank you!
You are full of wisdom and skill, Amazing ,watching from Ghana
Great work, definitely, the downside : first of all the tools (they cost much) and am assuming around not more than 8 hours of work not including waiting time for the glue, and the approximate of $250 US dollars for parts. Sure a challenge for whoever looking to build something himself.
Predlcaslo
I LOVE IT.
HOW LONG WILL LAST THE CHARGR?
2-3hrs.Thank you!
Good, but I can make one in half the time and only using matchsticks.
Dude, your workmanship is truly awesome...You get a Perfect 10 Score Dude...
ну с таким подходом можно было и готовых буковых досок купить
чего корячиться-то с поддоном
так он вроде ещё и из хвои
а она разве в акустике гуд?
в принципе да, из сосны короба делают, а из ели вообще пианинки всякие))) а поддон вполне себе стабилизированая древесина(сарказм))) но сделано очень, доски от поддона как раз винтажности придают
@@Roman_Ossetrov считаю что о качестве звука речи и нет, просто бубнилка классная...принцип расчета короба неправильный ,
@@Alex_Ryab бубнилка это в магазах продают , китайские жбл . а тут как не крути стерео и трехполоска. короб рассчитывать и делать под какието басы нет смысла , размер не тот ..
а сам короб сделан правильно
@@brandbmw6642 принцип правильный, а размеры нет.
@@schura1973 вопрос видимо в портативности
Perfeito cara!
Parabéns! 👏👏👏
Why didn't you hide antenna inside? And you can find voltmeter that better fits for this "box"
Very nice! A lot of work to not even play some rock music through it though haha
Wish I had those woodworking tools. Great job.
Who doesn’t have these tools laying around and can’t afford birch wood. So common..
all them damn tools...and he doesn't have a heat gun...
Really he builds this bad a** little Bluetooth speaker Box and that's all your dumb a** has to say? Let's see what you build my guy
@@ryanrotten8595 I know this ass has a heat gun.
@@ryanrotten8595 After spending Hundreds! Of USD for speakers, electronics and plastic shit saving on a heat gun is just painful to watch.
Post something you've built before you flap your d*** beaters
And how do you know how much he spent? Go buy one of those off the shelf that looks like that and tell me how much that shit costs
Genius mind with perfect tools...amazing
YOUR WORKSHOP IS KILLER!!
This really sucks. When you price this our you could buy a better speaker for the cost of the parts
Да, только проблема в том, что колонки не делаются из массива дерева по причине того, что появляется резонанс.
DIY I think the meaning has changed
Specifically this one so simple and fast to do it 😁😁🤣🤣
Койил хакики талант габ булиши мумкин Эмас 👍👍👍👍👍