DIY Bluetooth Speaker Using Pallet Wood V2
Вставка
- Опубліковано 25 лип 2024
- *Materials in video
- Creality Cr10 - V2 3D Printer Machine: www.creality.com/blog-detail/...
- Wifi & Bluetooth 5.0 Board Up2stream Amp V2:
+ Link buy in aliexpress: tiny.cc/czuksz
+ Link buy in arylic store: www.arylic.com/collections/di...
- 5.25inch 4ohm 40W Woofer Speaker: tiny.cc/ixuksz
- 2.5inch 4Ohm 15W Full Range Speaker: tiny.cc/gxuksz
- 2inch 4Ohm 20W Tweeter Speaker: tiny.cc/frbjtz
- 4 Way Crossover Board: tiny.cc/mxuksz
- Makita Terminal: tiny.cc/oxuksz
- 3 Pin On/Off Switch: tiny.cc/xxuksz
- Remote for amplifier board: tiny.cc/ryuksz
- 24V 4.16A Power Supply: tiny.cc/2zuksz
- Leather Handled for speaker: tiny.cc/pzuksz
- Speaker single face seal glue: tiny.cc/40vksz
- 5.5 DC female jack: tiny.cc/g0vksz
- LM2596 Step down module converter: tiny.cc/u0vksz
- Acoustic Foam: tiny.cc/h1vksz
- Pocket Plasma Disk: tiny.cc/qrbjtz
- Pillars PCB Board Nut Screws: tiny.cc/fpllsz
- Insert Nut Blind Hole Single Pass Copper: tiny.cc/fpllsz
- M3 x 5mm Screw : tiny.cc/rpllsz
- Anti Shock Rubber Stand: tiny.cc/wpllsz
- Electrical crimp terminal for connector wire: tiny.cc/0qllsz
* Watch more video
- Portable Projector Bluetooth Speaker Build: tiny.cc/ov5iuz
- Epoxy Inlay Dovetails Bluetooth Speaker Build: tiny.cc/qv5iuz
- Pallet Bluetooth Speaker V3 DIY: tiny.cc/pv5iuz
- Epoxy Dovetail Joint Bluetooth Speaker DIY: tiny.cc/uv5iuz
- DIY Bluetooth Speaker Using Pallet Wood V2: tiny.cc/0h7nsz
- Upgrade Bluetooth Speaker Using Broken Skateboards: tiny.cc/vg7nsz
- DIY Bluetooth Speaker Using Broken Skateboards: tiny.cc/5fxhpz
- DIY Bluetooth Speaker Using Pallet Wood: tiny.cc/mhmzmz
- How To Make A Wifi - Bluetooth Speaker: bit.ly/34IjlLH
- How to Turn Old TV into 4.1 Bluetooth Speaker: bit.ly/2pCrSkA
- Colored Pencils Bluetooth Speaker V2: bit.ly/2P1PWHY
- DIY Epoxy Resin Bluetooth Speaker: bit.ly/2miziaZ
- DIY subwoofer: bit.ly/2PaKYu4
- DIY 2.1 Bluetooth Speaker Using Colored Pencils: bit.ly/2IlnoEo
- DIY Bluetooth & Wifi Speaker: bit.ly/2GoP5va
- DIY Buetooth Speaker: goo.gl/UzrZRR
- How To Make A Waterproof Bluetooth Speaker Using Plastic Pipe And Simple Tools: goo.gl/RdUL2T
- DIY 2.1 Bluetooth Speaker Using 100W Subwoofer:
goo.gl/i1pPUY
- How To Make Boombox Bluetooth Speaker Using Pipe Plastic (New Version): goo.gl/tExBri
- How To Make Boombox Bluetooth Speaker From Pipe Plastic:
goo.gl/8y3VSx
- Building Portable Bluetooth Speaker goo.gl/nMKukP
- How To Make A BoomBox Bluetooth Speaker goo.gl/t8zYjD
- How To Make A Solar Power Bank Charger For Mobile:goo.gl/K7s9Hg
- Diy Bluetooth Speaker From Box Tea: goo.gl/DUSj8x
- How to make 24V RECHARGEABLE BATTERY: goo.gl/BTbzp6
- How to make 3s Battery: goo.gl/oL2cfM
- DIY Cooling Fan For Laptop: goo.gl/z3SRtR
* My Page In Facebook: bit.ly/33TEyTC
* Join My Group In Facebook: goo.gl/BMvRAj
* Help Me Reach 500k Subscribe Here: goo.gl/dXJRte
#palletspeaker
#palletbluetoothspeaker
#kingminhvuong - Навчання та стиль
Hi Friends! Do you like this speaker?
That is quite a speaker man. Nice full sound. Looks solid. Love your work 👍
Support my chanel boss
I am always waiting for your latest videos and that is enough to inspire me to make
Speaker 300000$
AWESOME MAN!!! what a fantastic work... congratulations! keep doing it !
This is extremely well done. You have quite a reare combination of taste, wood working skills and sufficient electronics skills to pull this off. I especially love how you treated the wood with oil and stayed away from laquer.
Can Tex
I enjoyed every minute of this video. I've seen other boombox builds but what is really outstanding about yours is the attention to detail in the inside equal to the outside.
Cheers!
As someone who is good at fixing things, but no building them from scratch. I learned so much from watching this. I hope you will make a version 3 and improve upon it again! I love this sort of video. I get to see how different people approach the same challenges. Your approach to drilling the holes was different then what I've seen other craftsman do, for example. Thank you for sharing your skill.
I love building stuff from old pallets..
This speaker looks really good.
I am Korean.
I've never seen this before. I was surprised. You're so dexterous. I'm touched. I started subscribing. I'm looking forward to the new video.
This is a super clean and good listing of parts used. For others to follow. Job well done.
Thank so much!
This is the BEST one I have seen so far! Amazing!! TO START WITH THAT CRATEWOOD... Ufffff! Too good! Humbling... truly!
You are brilliant! Everything is thoughtfully done and very tidy cables arrangements. Best part, you made this from a pallet. I can only “screw “ things up so I really admire your skills.
I am THOROUGHLY and I do mean THOROUGHLY impressed. This is easily in my top 10 wood repurposing videos. Wish I could sub twice!
Thank you!
Make a second account I dare you 🤣
@@KingMinhvuong Absolutely
@@jpeg4113 Lol 😆
I love your videos! You have a real talent that might pass under the radar sometimes but it's as precious as any! Keep up the great work, you're inspiring me!
This was worth every minute, awesome! I love the build and I have a bunch of those Arylic amps. One thing is the crossovers make a world of difference if you match them to your speakers. I love the idea of using a power tool battery too, they have a high output. Free pallet wood is a great idea as I can get pallets made from hardwood like new.
Thank you!
So beautiful and so much detail and effort put into it. I still can't believe the wood transformed. Well done 😀
Thank you!
I love the repurposed of the materials
Great looking build I love these homemade stereos.
Thank you!
Wow, that's a great soundbox you build there! Nice job. 👍👍👍
Este video merece más likes!! Te felicito por la dedicación que le pusiste al proyecto!
Man I just have to say amazing job. U seem like a very creative person always trying for the best results. You deserve the views and money you get. Keep it up!!
Thank you!
@@KingMinhvuong your projects so cool, thx you!
My friend this is another level!!!! Fabulous and clever design
Thank you!
めっちゃかっこいいですね！いつか自分でも電子部品まで組み込んでみたいです。
This is the Perfect Speaker
Cleanest made I have ever seen 👍🏼
Thank you
very good job, Amazed how clean work that was 👍🙏
This is Amazing work, I'm supper impressed. Weldone
Thank you!
Extraordinario trabajo.... Felicidades!!!
Y esa impresora 3D esta de lujo!!!
Beautiful, with a lot of work, it was perfect !!! Congratulations.
Thank you!
I like this, very creative way to reuse wood that is just lying around
PS: Don't care about those haters, it's your hobby, your way to build speakers and they are unique
I like your comment. Thank you so much!
@@KingMinhvuong Thank you for making videos!
Excellent design and choices. I like that you use the air movement of the bass port to help cool the DC/DC step-down. I have only two VERY minor suggestions... First, use a less obvious plastic for the 3D printed parts like a stainable woodPLA. It's such a pretty piece and the neon green is distracting. The second suggestion is that I feel like the Bluetooth receiver seems unprotected. Some sort of hard plastic shield over it would be preferable to it being exposed, plus it looks a little out of place. I'd love to have something like this myself, and I appreciate you using the Makita battery as opposed to trying to hack together your own solution. I use Ryobi tools myself and having a common battery platform is invaluable!
I liked the organic design and the clever idea of using the drill battery.
Congratulations, great project, well done with excellent electronic components. Difficult to make such accurate details for those who do not have professional machinery. Questionable the choice to put the IR sensor and LED. The choice of placing the drill batteries externally is wonderful. It was very nice to see the video, and I will steal your ideas for future projects. Compliments
Thank a lot sir. Good luck to you!
When i watch this. I verry a maze until end amazing skill..I really love all a lot of tools.. hehe clean job keep it up bro..
Good work, really appreciate
Do this fabulous work, I m always with you...
Caracas!!!! Com esses equipamentos da pra fazer mesmo. Até impressora 3d o cara tem!!!!! Minha nossa !!!!!
Это просто шедевр! Нет слов
Не то что другие
Looks good, but I don't envy whoever sets about replacing the drivers. When I repaired my speakers I silently blessed whoever decided to use crimp connectors and leave plenty of cable slack.
The drivers will last a long time. Not really something to worry about.
@@stopthephilosophicalzombie9017 people are still repurposing speakers from the 60's.... your thought process is the problem
i cant stand people who do that "well we have to save .001 cents in wire to have it look cool inside a box that will ONLY ever be opened by someone working on it so.. fuck them but theyll think its neat".. no dude theyll think youre an asshole
Really like every minute that you had spent on the speaker ... really amazing.
Thanks. Amazing attention to detail.
Am i the only one that loves watching how the nails were removed?😂
I was suprised that he used such a small hammer for the job.
Nope
When i can't sleep i watch that Stuff
me too 😅😅😅
Me too
I think you'll sleep even better if you watch my video. jok :D
Same
I respect you. People who make fun of you and caption you are incapable of recognizing your potential. I often watch your videos sleep deprived. I love the cleanliness of your work.
Love you sir ❤️❤️❤️❤️ from india
That turned out awesome dude! Wish I had a Woodshop setup to be able to do something like this oh, very cool! I'll bet it sounds amazing with all the acoustic dampening and bassport.
Iphf
Nice job. I love the result and the sound.
Congratulations
Legend says he's still making..
👏👍from Brazil - State Minas Gerais
Thank you!
Did not even realised that 38 min were up. Mate, i thank you for sharing your imagination and skills with us !
Thank you!
Appreciate your efforts to build such an unique speaker
Очень классно...
not sure who needs to hear this, but playing "no one knows" by Queens of the Stone Age goes great with this video apparently.
This was an awesome build. Probably your best and most informative yet. Right before you showed the wiring diagram, I thought to myself "Damn that looks complicated, hope he has a diagram somewhere!"
You are right,it is the best of all of his builds.
Probably the best diy bluetooth speaker ever made 💯
Amazing it sounds just like my internal PC speaker.
me: doing this everynight..
In my dreams! lol
Бои,без правил.
Incredible skills as usual. And the tools are quite an investment. Nice job as usual...
Fair play. Nice use of pallet wood. Very well built. Enjoyed watching that. Cheers :)
Thank you!
25 гдн 3-4 надо было поставить, тогда было бы гуд.
Ему сзади не помешало бы пару хороших пассивных резонатора, ато бас не ахти. У меня малюсенькая Nomi с одним большим резонатором звучит гораздо лучше.
It's great .But not realy DIY .The stuff this Guy has .Did you see the printer wauw .
This is DIY. DIY does not mean using only your hands.
@@mythcrab6047 Your so right . I said it wrong .
@@6moon.s English is not my native language..And I said I was wrong ! I like what this man does .And why am I Lazy ? Why so hostile .Have a good day .
¡Excelente amigo, como todos tus proyectos! ¡¡Un abrazo desde Mérida, Yucatán, México!!
very steady requires a long process and high creativity, enthusiasm continues
Без станков хрен бы ты что сделал
Я думаю, что без станков ни кто за такое не взялся бы.
ОК тогда это не DIY, а практически промышленное производство.
DYI Really, Are you serious??
No one owns these thousand dollars machine at home.
Exactly, niche thing too.
you can do it without this machines, only take more work and care
One of the most Alegent and extremely detailed diy speaker video, and in general diy video
Thank you!
nice build.. well planed and nice wood skills and cable management skills u got there...
Hay quá, giỏi quá.
Dân công nghệ thông tin, biết điện tử, thích làm mộc, mê âm thanh, thích chế tạo(in 3D) trong một 😄. Chắc còn nhiều môn nữa mà chưa show hết. 😁
Good instruction, well laid out design, loved the use of a tool battery. About the only question I had was tuning the box volume & port tube to the chosen drivers. I've watched a few of your videos & subscribed after seeing this build.
Thank you so much!
Amazing job, man !!! Congratulations !!
Perfect Work Congrat!
Learnt a lot today watching this video, amazing build great schematics brilliant video, thanks for sharing.
Would love to make one myself. THAT'S COOL
very cool build, two tumbs up !
Felicitaciones, es una maravilla lo que haz hecho. Gracias por compartir.
So talented.. so many creative and beautiful things can be done with recycled wood. Thanks for sharing
¡¡¡Joooodeeeerrr que guapada y que trabajazo!!! ¡Enhorabuena! Me ha encantado
Tío eres un crac , y me das una envidia grande, eso si, envidia sana. De ver las herramientas de trabajo casi nuevas con las que trabajas que con ese equipo puedes realizar casi cualquier cosa te propongas. 10 de 10 puntos te doy .
great work, great result. thanks for the detailed video. definitely like! p.s the best wood for making loudspeakers is Swamp Ash (tested)
Lot of work went into that, but brilliant outcome, well done.
definitely my next project
That was A LOT of work. I want it.
How amazing all tools combined with high skill...
I want to be like you bro...
This is satisfying to watch. You got a new sub here! 🙌
Very meticulous, outstanding work!!!
Thank you!
Just WOW!
The patience it takes to cut out all those structor ribs.
Thank you!
Amazing work I really need to learn how to build like that
Damn it!, my respects for you, dude, what a amazing work
Thank you!
Cara... perfeição total, parabéns !
Achei comentário brasileiro 🤝
Sergio de Chile, mis felicitaciones, eres un genio me encantan tus trabajos gratulaciones, sigue así, mucho éxito, maestro del audio.
I enjoyed a lot watching your video. It’s a fantastic work.
Thank you
Amazing job gorgeous build for the next version I think it would be better to isolate the sub woofers instead of the full range speakers
You got mad skills Sir!
Looks really good, man.
Es un trabajo espectacular!!! Me quito el sombrero!!!!
Thank you!
Superb Bluetooth speaker DIY from palletwood !
Thank you!
This is a pretty good speaker! Very high quality design, good quality components, this is the best one that you've made on the channel so far :) and the battery is modular as well - good if you have anything that connects via a Makita drill battery connection :)
Thank so much!
Thank you, sir, 6:15 this is new knowledge to me to use compass like that
yes i do love the speaker just dame awesome wow nice work man
The sound was satisfying❤️❤️❤️
me: doing this everynight..
In my dreams! lol
I like your technique for pulling nails - it prevents a lot of wood from getting mangled.
Thank you!
Amazing work here!
Beautiful craftsmanship
Great project, it will help me a lot, if I cannot repair my Sonos play.5 I will change all its driver to this but 2.1
Looks really awesome, and i wish i could afford to get a speaker setup like that, but i can't really build anything as i don't own the stuff to make jack, and also kinda hard to afford equipment like this on disability.
Amazing work my friend love your work millions thumbs up
Thank you!
This is an amazing project, 👌