How to Replace Headlight Assembly 98-05 Lexus GS300
Вставка
- Опубліковано 9 тра 2019
- Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALHP00573
1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 97, 98, 99, 00, 01, 02, 03, 04, 05, Lexus GS300
🔧 List of tools used:
• 10mm Socket 1aau.to/oX9/1AXAA00017
• Plastic Fastener Remover 1aau.to/oaR/1AXAA00290
• Trim Tool Set 1aau.to/opJ/1AXXX00004
• Ratchet 1aau.to/oanq/1AXAA00016
• Socket Extensions 1aau.to/o7e/1AXAA00015
For More Info visit us at 1aau.to/h/bBp/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
can you guys upload a gs300 front fender removal tutorial please
+Steezy Beats We're always cycling through cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
So you're deleting comments that call you out for instructing people to break their bumpers? Very professional.
I bought these headlights based on this video. They’re beautiful lights. Thanks for all these GS videos. Good stuff.
Don't follow the instructions in this video. When the guys yanks it off on both sides he is tearing off two brackets with two more nuts each. These guys have no idea what they are doing.
Exactly what I saw I cringed so damn hard !! I’ve done this multiple times and you have to move the inner fender well to get to them with an extension
Noobs lmao
Great tutorial thanks I needed that!
While he had the front bumper off, he should've also replaced the hazed up fog lamps and replaced those bulbs with brighter bulbs or LED's as well. I'm not hating. I'm just suggesting that because he already went through the process of taking off the front end, so why do it again later? Besides that, after the headlamps and fog lamps are replaced the front end lighting will have better continuity. Been there, done that!✌️👍
Can you do this same exact video for a lexus es300 2003 please
Does there happen to already be videos on the rack and pinion replacement, power steering system flush, power steering pump replacement, pulleys and serpentine belt replacement for gs300 2nd gen
thanks you forgot about two bolts and made me ruin my bumper👍🏽
Does the HID headlamp assembly have a different part number?
did you ever find out?
NOTE EVERYONE! That is not the correct way to remove the front bumper... he broke the mounting tabs that are bolted to the fender with 2 10mm that you have to access from the inner fender line
this dude looks like cheddar bob from 8 mile. thank you sir
why remove the bumper?
I've been to the junk yard, and all the bumpers are intact. Most of the headlights are missing w/ no damage to the bumpers. unless its been damaged prior to people removing the headlights
So the bumper can be out of the way i believe, since there is some part of the headlights covered and screwed down by the bumper
Will this work for the factory HID ?
Does the assembly come with a ballast ?
What’s the little click in pin called I need to order two new receivers
Is it possible to switch the ugly headlights to the original 1st gen italdesign headlights?
To explain, The 1st gen in japan was designed by italdesign, and the 2nd gen was a tweaked a little by Toyota, but its the same platform used by the toyota crown that the 1st gen in Japan used. And I might not know if the headlights, and tailights can be replaced with the original Giugaro italdesign headlights, and tail lights.. Is it possible?
Thanks!
How do i adjust the headlight
Are those new headlights HID's?
So if I take my Car or Truck to 1A Auto and its Missing a bolt or 2 and the 2 Clips that hold the 2 Bolts in or any other Nuts or Bolts,( I looked and the bolts are $00.72 cents each and the Clips are $00.65 cents each) 1A Auto won't replace them and Make Sure everything is Put back Together Correctly, They will just give it back with missing Under Guard Hold Down or Up in this case allowing Road Debris and Stones and Snow in winter to Clog in there. When I took My GS300 2005 to the Dealer they Informed me of the Missing Screw-Bolts and Clips and replaced 4 of them for $6.00 I had taken it to a Not Factory Authorized Shop Before and they either lost or forgot to Put them In, Long Screws and Clips Never Unscrew Themselves and both Fall off, If they did cars and Trucks all Over Would Have Under-Carridge Covers Flapping in the Wind, So proves the Point they don't just Fall out!
How about the ES350 removal?
+BJ Wake We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
Was the right side of the bumper ripped off when removed? There’s 2 screws holding the bumper to the fender. When I removed my bumper to change headlights. Great video!
Of course he shows the passenger side, the less pain in the ass side
Please don't let me catch you lackin in public
Now why didn't you guys show the driver side headlight replacement, because it's not the same. There is part of the engine wiring harness that blocks bulb replacement. Simply replacing the bulb on the driver's side turns into a trip to the dealer for most GS owners due to bulb access problems.
Hell the headlamps u changed arnt really that bad of shape.. ive seen far worse
+J The Goat Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You could actually do this without removing the bumper
i don't see how
How will go about that
This light housing from them is way over priced.
These headlights are absolute trash turn signals are different left, and right ones fast one slow they don’t even leave you with enough plugs to still use fogs these suck