Charges double what every other milling company does which sucks bc I’m local and having to send off to jagerworks bc I’m not paying double to mill a slide with a dang machine
I love the fact that yall are doing this to give more flexibility in the platform,and I was one step ahead of you and I just bought (3weeks ago) the glock gunsite service pistol it's a g45 9mm and it has the slide done like this and the gun comes with a 509t and suppressor hight sights engraving on the top 4.5# trigger and a better mag release button,its 1 of a 1000 with a special serial number and I'm super proud to be an owner of one
I wouldn't do that. This is the worst bussiness i've delt with. They will take months. They lie. His videos are great, but his bussines is the worse. They take weeks to ship. They sell things that are not in stock and don't tell you till call and wonder where it is. And if you do a return it will take months.
One of things on my bucket list is to go to Glock Store, 7 hrs, not to bad, anyway I really enjoy Lenny’s enthusiasm, my favorites are Glocks and 1911’s so would be a fun trip. Another fun video and all the best to Lenny and the Glock Store!(glad y’all left California!)
Just got my Glock 45 back about 2 weeks ago. Cut for a 509T. What are the odds that you are using my slide in this video? That would be cool. Great work!!
How’s it been working out? Been thinking about sending my slide in. How’s the fit and finish, does the optic move around at all or is it nice and solid?
I’ll be bringing you a couple of my Glock slides to cut for me when I come down to visit the GlockStore later this spring. Thanks Lenny for the update because, it’s the 509T that I have.
@@djuncker9910, I read the testimonies from customers that did business with the GlockStore and they all seem to be happy. Have you had a bad experience?
Always Great to See and Hear you Mr Magill. Great Video Sir And Fantastic Demonstration. Great to Here your new Shop In Nashville Is Doing Fantastic… Stay Well Mr Magill and Excellent .
I milled my slide for a holosun 507. I drew up the front and back radius on the computer so the optic was a snug slip fit into the cut. I didn't even bother with the 2 locating islands because it physically can't move.
Thank you for your video! Do you service other pistols besides Glock? I know that I will want a Holosun HE-509-GR X2 mounted on a pistol. However, I doubt that the pistol will be a Glock. Thank you. JP
Mistakes are made, you judge a company on how they rectify mistakes. I hope you do read every comment as no one is responding to me and it has been 48 hours since I wrote this email and over 30 days waiting for someone to respond. JB Feb 21 I spoke to CS person (female) and wanted to order magwell and several additional magazines. I was ordering for new Glock 47 and needed advice as to correct magwell. She recommended the item that was sent. Upon arrival it was apparent that the magwell was incorrect. I called, got what I assume is correct item ordered, had to pay the postage for RDA out of my own pocket (to cover your incorrect information) and was charged for postage on new item as I did not hit $100. So to this point I am out postage both ways on YOUR mistake. RDA was USPS. Notated that was received on 3/3. That being a Friday, I understand that you would not check in until Monday, March 6th. I called Tad on March 13 to check on return and it had not been checked in yet. He had no ETA, said backlog of returns, needed more help in handling returns. Let me tell you something when I “reordered” the correct item, I told the CS person send the new one (they confirmed my CC was still on file), credit my CC when RDA is processed. IT IS March 20 and I have no credit and no magwell. Been a long time (and I fly 40 + trips a year) since I have experienced CS this poor. Please acknowledge receipt of this email and credit my account the original price of the incorrect magwell. As soon as possible.
Free market, brodie. 10 HAAS machines and the manpower to run them ain’t free, but you’re more than welcome to buy yourself one and cut slides as cheap as you want.
We get slides in from all over the country from UPS, FedEx, and USPS. Just box it up before you go in and if they ask, say it’s a tool or something and leave it at that.
Yup, just had my 43X milled by them for the 507K. Its called the SLIMLINE MOS RETROFIT - FOR G43X MOS/G48 MOS. They basically just shave the back posts down for a seamless fit, as well as shorten the mounting screws for you. Highly recommend it and I think it only took around 8-9 days to get it back.
The very last thing Glock needs is to add to the already worst grip angel on the market. A person must over break their wrist just with the angel of the Glock as is. This will be a cash cow to direct mount to get it somewhat better pointable gun.
Nahhh. No thanks. I don’t need the aid of a rifle sight on my handgun. I can hit targets without one. I have a better method, I actually practice a lot.
@@glockstore Thank you. I have one I've been trying to decide if I want to use the Holosun made to mount directly to the MOS slide or send it to Agency. If I could sell it or trader it for a milled slide I would.
Be sure they blue the steel adequately…mine began rusting in the corners. I had to blue it myself. The guy (Joe) I tried to work with just blew me off. (SO-1476361)
I love how he doesn't talk like a sales guy, he just talks like a dude who enjoys glocks
Glocks sell themselves
Sooo true!!
He is selling cuts
Are you kidding me? Lenny embodies the slimeball sales guy 100%
Charges double what every other milling company does which sucks bc I’m local and having to send off to jagerworks bc I’m not paying double to mill a slide with a dang machine
The SCS is the best situation for the MOS in my opinion! You can co-witness with regular sights! Beautiful!
FYI, Holosun also makes an MOS to 509T steel plate so you don’t have to use double plates with the MOS.
Do you know the link because I don’t want to get the wrong thing? I have g23 mos gen 5
I love the fact that yall are doing this to give more flexibility in the platform,and I was one step ahead of you and I just bought (3weeks ago) the glock gunsite service pistol it's a g45 9mm and it has the slide done like this and the gun comes with a 509t and suppressor hight sights engraving on the top 4.5# trigger and a better mag release button,its 1 of a 1000 with a special serial number and I'm super proud to be an owner of one
Thank you GlockStore for not leaving us ACRO people out. I’m definitely sending my slides. 🎉
I wouldn't do that. This is the worst bussiness i've delt with. They will take months. They lie. His videos are great, but his bussines is the worse. They take weeks to ship. They sell things that are not in stock and don't tell you till call and wonder where it is. And if you do a return it will take months.
One of things on my bucket list is to go to Glock Store, 7 hrs, not to bad, anyway I really enjoy Lenny’s enthusiasm, my favorites are Glocks and 1911’s so would be a fun trip. Another fun video and all the best to Lenny and the Glock Store!(glad y’all left California!)
Just got my Glock 45 back about 2 weeks ago. Cut for a 509T. What are the odds that you are using my slide in this video? That would be cool. Great work!!
How’s it been working out? Been thinking about sending my slide in. How’s the fit and finish, does the optic move around at all or is it nice and solid?
I’ll be bringing you a couple of my Glock slides to cut for me when I come down to visit the GlockStore later this spring. Thanks Lenny for the update because, it’s the 509T that I have.
read the reviews for the glock store
@@djuncker9910, I read the testimonies from customers that did business with the GlockStore and they all seem to be happy. Have you had a bad experience?
I send mine and it’s perfect and I received back in 6 or 7 days,thanks GS!!
What courier did you use?
Usps
Thank you Lenny for this great Video and for moving to Nashville!!!💖👍🇺🇸🇺🇸🇺🇸😉
My slide should be delivered at the store today, can’t wait to get it back! I ordered the acro cut😊
I neeeeeeeeeeeeeeded this video!!!
I finally got my acro p2’s in and they’re just sitting there.
Always Great to See and Hear you Mr Magill. Great Video Sir And Fantastic Demonstration. Great to Here your new Shop In Nashville Is Doing Fantastic… Stay Well Mr Magill and Excellent .
Lenn you are the man! You the reason why I will try a Glock and not buy another sig. but your great love the vlog!
Forward Controls Design is the best plate for acro or 509t on a MOS
I love my 509t on my g45 mos
I didn’t get an mos 45 should I get trijcon hds1010 or get my side milled for direct mounting this sight without iron? Thanks
I milled my slide for a holosun 507. I drew up the front and back radius on the computer so the optic was a snug slip fit into the cut. I didn't even bother with the 2 locating islands because it physically can't move.
Lenny is the ultimate salesman.
Thanks, Uncle Lenny~
I’d assume you can do the same for the Steiner MPS, too. Looks like a solid setup. Now I’m really tempted to get my 17g4 cut for an optic.
MPS uses the ACRO footprint
Lenny
Great videos, a question, is there a video on a Glock 43 cut and with optical? I would like to get that on my G43
Just bought one
Buy me one too
Thai you for putting it lol Ike a picatiny rail for the red dot
Will the 509t fit directly to the slide on a glock if it's cut with an rmr footprint
Thank you Lenny for the update
Thank you for your video! Do you service other pistols besides Glock? I know that I will want a Holosun HE-509-GR X2 mounted on a pistol. However, I doubt that the pistol will be a Glock. Thank you. JP
Glock heaven ❤
I see you cut for the P320, how about the M&P 2.0? One of the most popular platforms, seems like a good idea.
Mistakes are made, you judge a company on how they rectify mistakes. I hope you do read every comment as no one is responding to me and it has been 48 hours since I wrote this email and over 30 days waiting for someone to respond. JB
Feb 21 I spoke to CS person (female) and wanted to order magwell and several additional magazines. I was ordering for new Glock 47 and needed advice as to correct magwell. She recommended the item that was sent.
Upon arrival it was apparent that the magwell was incorrect. I called, got what I assume is correct item ordered, had to pay the postage for RDA out of my own pocket (to cover your incorrect information) and was charged for postage on new item as I did not hit $100. So to this point I am out postage both ways on YOUR mistake.
RDA was USPS. Notated that was received on 3/3. That being a Friday, I understand that you would not check in until Monday, March 6th. I called Tad on March 13 to check on return and it had not been checked in yet. He had no ETA, said backlog of returns, needed more help in handling returns.
Let me tell you something when I “reordered” the correct item, I told the CS person send the new one (they confirmed my CC was still on file), credit my CC when RDA is processed.
IT IS March 20 and I have no credit and no magwell. Been a long time (and I fly 40 + trips a year) since I have experienced CS this poor.
Please acknowledge receipt of this email and credit my account the original price of the incorrect magwell. As soon as possible.
We're sorry for the inconvenience. Please provide us with your RMA Number and we'll get this sorted out for you!
I did AND response was we’ll get to it soon. It’s been nearly 30 days. HORRIBLE RESPONSES. You don’t care.
Oh yeah, you also explained policy of not refunding postage costs, regardless of who made mistake ordering. THINK ABOUT THAT.
@@johnhank724 We’re trying to help you. Post your RMA number and I’ll get you taken care of.
When will you guys offer front serration cuts
I wish I would have know this before I sent my optic and side to Glock
How long should you leave the optic in the sun
Just use a Tango down plate for the aimpoint Acro
Does this cut impact reliability and I assume voids warranty?
Is this something that is doable on a Glock mos? Would it make the available cutout work even better?
Can you get taller sights to cowitness with the 509?
U guys going to do cuts for eps?
How much? I can pick up a G17 slide already cut for $100 shipped...
Nice
How do I get that discount if I get a slide cut and a optic?
SKU 20174 at glockstore.com
Can't get onto GS site from phone! Phone does not like GS Tracking .
175? I've been seeing 100 to 140. Yes they are nice jobs too.
Free market, brodie. 10 HAAS machines and the manpower to run them ain’t free, but you’re more than welcome to buy yourself one and cut slides as cheap as you want.
@@BWHeitmann lmao, I did actually. It is a free market and Starting at 175 is not worth it.
Can you do the low cut on the 43
Do you only mill Glock slides?
No ACRO cuts for the P320?
Question: Is your slide cut program limited to Glocks, or can you offer the service to owners of other brands (Wilson Combat EDC-X9 specifically)?
We are currently servicing Glock and Sig.
@@glockstore 😞 I will wait, confident you will expand services 😊
@@bronsont7280 check ghost dynamics
If I already have the 509t optic and my G17 Gen5 slide, can I bundle the slide work and installment with you?
There's no option for the 509 ACSS 😢
Does cutting your slide voids the warranty from Glock.
No
Can you do red dots for gen 3 and gen 4
yes!
Can this be done with a Glock 41?
What courier are people from California using to send their slides? Already struck out with UPS.
We get slides in from all over the country from UPS, FedEx, and USPS. Just box it up before you go in and if they ask, say it’s a tool or something and leave it at that.
I was told by the Nashville location they can't mount a red don't on a Glock 41..is this true and if so why?
We aren't due to the way it's designed, the relief cut is too deep and there is not enough material.
Can you get an MOS cut on a slide? Not seeing it as an option. Would like to get MOS done on my 26 so I can use my SCS in the summer. Thanks.
You can’t just cut a slide and turn it into an MOS slide. The slide itself and the location of its internals are different.
@@BWHeitmann yeah, I’m aware, but I’m looking to get the MOS footprint cut because I have a holosun SCS. Other places do it just slower.
What cnc set up you run?
10 HAAS machines
Website says it's currently down for maintenance. Do ya'll do slides other than Glocks?
Sig and Glock
@@glockstorewill you do airsoft glock slides?
Anyone here have done this with a 43x or knows if itll work ?
Wish your folks answered sales questions from your website email.
What's your question?
Do they service S&W MP 1.0
Not at this time. Thank you for asking!
Can you do that for the 43x mos?
Yup, just had my 43X milled by them for the 507K. Its called the SLIMLINE MOS RETROFIT - FOR G43X MOS/G48 MOS. They basically just shave the back posts down for a seamless fit, as well as shorten the mounting screws for you. Highly recommend it and I think it only took around 8-9 days to get it back.
We don't offer this specific cut for the Glock 43X.
Ok ,what’s the cost
The 509T and ACRO cuts are $200.
The very last thing Glock needs is to add to the already worst grip angel on the market. A person must over break their wrist just with the angel of the Glock as is. This will be a cash cow to direct mount to get it somewhat better pointable gun.
Website is down
Thank you, we are working diligently with our server host to restore the website!
Its up and running
Nahhh. No thanks. I don’t need the aid of a rifle sight on my handgun. I can hit targets without one. I have a better method, I actually practice a lot.
Glock and other firearms companies along with optics industry need to get all this $@!# standardized, it's pure BS !!
So true.
There should be one footprint for all.
Far more Superior then mounting with screws that's why I run the 509t on my Glock 19
I’m trying to get a hold of customer service!!! Plz contact me. I don’t know how else to reach you guys since nobody picks up the phone or email!!!!
I have past this on to our customer service team and you should be getting a call today. Thank you for your patience Landon.
Can you cut all of the Glock MOS slides? I have a 19 MOS that I want either an RMR or a holosun mounted to.
No, Sadly. You'll need to use the adaptor plates provided in the MOS case.
@@glockstore Thank you. I have one I've been trying to decide if I want to use the Holosun made to mount directly to the MOS slide or send it to Agency. If I could sell it or trader it for a milled slide I would.
Be sure they blue the steel adequately…mine began rusting in the corners. I had to blue it myself. The guy (Joe) I tried to work with just blew me off. (SO-1476361)