How to Replace Power Window Motor & Regulator Assembly 2003-2011 Mercury Grand Marquis
Вставка
- Опубліковано 8 січ 2023
- Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ic/1AWRG00254
This video shows you how to replace both the window regulator and the motor on your 2003-2011 Mercury Grand Marquis. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
This process should be similar on the following vehicles:
2003 Mercury Grand Marquis
2004 Mercury Grand Marquis
2005 Mercury Grand Marquis
2006 Mercury Grand Marquis
2007 Mercury Grand Marquis
2008 Mercury Grand Marquis
2009 Mercury Grand Marquis
2010 Mercury Grand Marquis
2011 Mercury Grand Marquis
Tools you will need:
• Pocket Screwdriver
• 11mm Socket 1aau.to/oa5Z/1AXAA00015
• 5.5mm Socket
• 5mm Socket 1aau.to/oaND/1AXAA00017
• 7mm Socket 1aau.to/oaND/1AXAA00017
• Dead Blow Hammer 1aau.to/oL3/1AXAA00091
• Trim Tool Set 1aau.to/oV7/1AXXX00006
• T20 Driver 1aau.to/oAZ/1AXAA00008
• T27 Torx Driver
• 1/2 Inch Ratchet 1aau.to/o3F/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/oaND/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oa5Z/1AXAA00015
• 3/8 Inch Drill Bit 1aau.to/oat/1AXAA00092
• Gloves 1aau.to/oBu/1AXSS00048
• Safety Glasses 1aau.to/ovh/1AXAA00343
• Punch
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
In case any of you use bolts to install new one like I did. I used 10 of the 1/4-20x1/2, but the two for the window have to be 1/4-20x1". The the half inch aren't long enough, just so you know before you have to run to the parts store without your window in.
This video is incredibly helpful. After watching this, I'm definitely going to pay someone else to install it for me.
To those doing this repair, Be careful tightening the new bolts on the glass. I overtightened it and it shattered the glass on my previous Grand Marquis. Might be better to tighten those two by hand tools.
@TRQ You do great work and this video is very well made. The camera work, editing, voiceover, and repair advice is all top notch. Thanks!
You have absolutely no idea how helpful this video was to me.
Thank you.
Excellemt jpb. The tecknition spoke clearly , showed the systematic sequince of disassembly and also the assembly. Did not skip any steps
and made the job much simpler to do. The video person also did his job very well. Focused exactly on the step being taken.
Thank you for video. I only replaced my motor I stopped after the step of just being able to do that. This video made it so easy.
I like learning to do my own mechanics on my car
Thank you. The last mechanic broke the switches, so this time I'll do it.
Thanks for the info made my job easy.
Used this video to do mine today. Worked like a charm! Thanks for the help 👍
Just finished with my driver side and now my passenger side went out😂Thanks for your help.
I’m trying to get the driver front window to come down a few inches in order to reach those rivers on the window like you said, but it won’t move in the slightest. Any ideas? It won’t budge one bit!
I used your video to get the rear left window regulator/motor replaced a couple weeks ago, and it worked like a dream. But that motor wasn’t completely toast yet.
What size bolts did you use?
eazy but take your time in the light no rivits in the glass !! use little bolts and locknuts !!
I paid for a wrecing yard to pull a window for me. I knew better than to try to hammer the window rivets out lol. They broke it. But you DID NOT break it....well done
how do you move the window up if its all the way down and the motor is totally dead?
Gotta LOVE auto makers. Its NOT T20,T25 OR T30 but a T 27 lol. So you need the whole set not just the main ones. I think EVERYTHING should be 5/16.
Where can I find that punch?
Wonderful video you did a great job step by step as the guy below me said incredibly helpful and it sure was thank you from the bottom of my heart great job keep up the good work
I had to use a grinder for the rivets....
Thank God it'll be the first and last time I will replace the window regulator ...
I'm selling the car
This is a nightmare, going to a shop
Freaking hell