Just wanted to stop by the comments section to thank you for all the service videos you "had". When I discovered your channel I went back and watched all of them (and enjoyed them too!) Hope some day the owner lets you film again. Hope you are well, say hi to Mikey for us!✌😁😎
Hey, just an fyi, I recently partially broke the nose off my powermaster starter (out of warranty) and sent them an email to see if I could purchase that part. They called me and asked me to put it in a medium usps flat rate box and sent it to them. A week later I received my starter back completely reworked and tested. The total cost was what it cost me to ship it. These guys are great to work with.
You will do well David. I knew you were a car enthusiast and drag racer. I think you are an oil guy to help support your hobby / sport. That said, you are good at it and I think you like the oil business. I was a drag racer before you were born. Now, I am just a car guy. I will be hanging around to see what you do next.
Apparently I missed something - enjoyed watching your videos even though all our stuff up here is gas. I see all your service call videos have disappeared which is unfortunate. Enjoyed you taking us along on calls and seeing a professional at work - especially when you ripped out a hack and whack and made it a masterpiece.
David what happened to all your HVAC videos?? Just curious? I really enjoyed them. I loved watching you work on oil burners right up there with Steve lavs videos, just wanna know?
Mr. Shaker do you know if they make a thread chaser to touch up the threads on a nozzel line I have been doing this for 35 years. the young guys think they need to put a 3 foot wrench on.the.nozzel line to tighten it. any help you can give would be appreciated it or the thread pitch on the nozzel line
I believe they're standard 9/16" - 24 UNEF thread (ultra/unified fine thread). there should be taps and dies on the market somewhere, although it's likely hard to do by hand and get it meshed and fixed.
I think you've expressed your sentiments clearly. Good people don't always make good decisions. A jacka$$, ignorant decision is just that. Something your decades of service and hard work for the company doesn't deserve as payback.
Im gonna miss your burner videos,, Ive been doing this for over 20 yrs and picked up a thing or two watching. most of the other guys are too busy being movie stars to worry about the job content,, hopefully you will do a side job for family or friends and post it.
Hey Dave first keep making UA-cam vids! If they can't be Burner service so be it his loss! To turn down free advertisement and to show case the professional technicians he has on staff well shame on him. Maybe you can blur the company logos and just don't mention the name! New UA-cam... Dave Shaker the burner service Tech!! I've been doing Hvac 35+ year same company!! Today todays Ceo/owners"SNOWFLAKES" over react!! Hang in there buddy we appreciate you!!
you should go and tear apart your own boiler and make videos on it complain about the idiot who put it in then replace your water heater next week try different boiler see which works best
David I know how it is because I worked for a company for over 30 years retired and started my own business and was doing great until I had this one guy the one I started the company with, and he started doing side work and had his customers calling me for call backs working in my company name 3 years and he is still me I know DUMB//
Just wanted to stop by the comments section to thank you for all the service videos you "had". When I discovered your channel I went back and watched all of them (and enjoyed them too!) Hope some day the owner lets you film again. Hope you are well, say hi to Mikey for us!✌😁😎
I just retired from a major automotive manufacturer proving grounds Sept. 1. I will be working HVAC the rest of my days. Love your oil burner videos.
Hey, just an fyi, I recently partially broke the nose off my powermaster starter (out of warranty) and sent them an email to see if I could purchase that part. They called me and asked me to put it in a medium usps flat rate box and sent it to them. A week later I received my starter back completely reworked and tested. The total cost was what it cost me to ship it. These guys are great to work with.
Miss hearing from you guys! Guess the heating season is keeping you busy. Have fun 😅
Gonna miss the burner videos but in sticking around for whatever shenanigans you get into
What happened to all the boiler repairs
You will do well David. I knew you were a car enthusiast and drag racer. I think you are an oil guy to help support your hobby / sport. That said, you are good at it and I think you like the oil business. I was a drag racer before you were born. Now, I am just a car guy. I will be hanging around to see what you do next.
Apparently I missed something - enjoyed watching your videos even though all our stuff up here is gas. I see all your service call videos have disappeared which is unfortunate. Enjoyed you taking us along on calls and seeing a professional at work - especially when you ripped out a hack and whack and made it a masterpiece.
That is a shame, the repair video's is why i watch your channel.
David what happened to all your HVAC videos?? Just curious? I really enjoyed them. I loved watching you work on oil burners right up there with Steve lavs videos, just wanna know?
Did I miss something did you give up oil work?
Still hanging around.
Ok, I won’t call the jack …. Hope the Pipe Doctor comes thru.
I used to live your HVAC videos guessing something happened on the job is why you are not doing them anymore
Great video 👍👍👍
I remember on my old 66 chevy malibu the starter was the old heavy cast iron
680! What's the best E T and MPH?
With this motor 10.70@124mph But with the big motor this car ran 10.0@133mph
Mr. Shaker do you know if they make a thread chaser to touch up the threads on a nozzel line I have been doing this for 35 years. the young guys think they need to put a 3 foot wrench on.the.nozzel line to tighten it. any help you can give would be appreciated it or the thread pitch on the nozzel line
I believe they're standard 9/16" - 24 UNEF thread (ultra/unified fine thread). there should be taps and dies on the market somewhere, although it's likely hard to do by hand and get it meshed and fixed.
I think you've expressed your sentiments clearly. Good people don't always make good decisions. A jacka$$, ignorant decision is just that. Something your decades of service and hard work for the company doesn't deserve as payback.
Im gonna miss your burner videos,, Ive been doing this for over 20 yrs and picked up a thing or two watching. most of the other guys are too busy being movie stars to worry about the job content,, hopefully you will do a side job for family or friends and post it.
Hey Dave first keep making UA-cam vids! If they can't be Burner service so be it his loss! To turn down free advertisement and to show case the professional technicians he has on staff well shame on him. Maybe you can blur the company logos and just don't mention the name! New UA-cam... Dave Shaker the burner service Tech!! I've been doing Hvac 35+ year same company!! Today todays Ceo/owners"SNOWFLAKES" over react!! Hang in there buddy we appreciate you!!
you should go and tear apart your own boiler and make videos on it complain about the idiot who put it in then replace your water heater next week try different boiler see which works best
David I know how it is because I worked for a company for over 30 years retired and started my own business and was doing great until I had this one guy the one I started the company with, and he started doing side work and had his customers calling me for call backs working in my company name 3 years and he is still me I know DUMB//
I hate to say this but the only reason I started watching your channel is because you were repairing & installing boilers. 🫤
Me too