Build the Star Trek Enterprise NCC-1701-D - Pack 1 - Stages 1 and 2
Вставка
- Опубліковано 30 чер 2024
- You can now order this amazing ship by following this link.
an7b.short.gy/WorldofWayne_St...
The amazing U.S.S. Enterprise NCC-1701-D from the hit TV show Star Trek - The Next Generation is now available to build from the folks over at Fanhome. This model is a 27.5 inch die-cast replica of the Galaxy-class starship. It is completed in 120 stages which is roughly 30 packs.
00:00 - Introduction
02:40 - Stage 1 - The Main Command Bridge
14:51 - Stage 2 - The Port Warp Nacelle
Subscribe to World of Wayne at bit.ly/307c9rj
Support the channel and see the behind the scenes videos and blogs on my Patreon channel at
/ worldofwayne
----------------------------------------------------------------------------------------
My Social Media, Amazon Store and Merchandise can be found at :
www.linktr.ee/worldofwayne
Video Game Soldiers by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: www.twinmusicom.org/song/295/v...
Artist: www.twinmusicom.org
#StarTrek #Enterprise #Fanhome - Навчання та стиль
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Like video
Hurray! I was missing this build. It has it's problems but nevertheless it was my favourite of your builds. Was gutted when EagleMoss failed and it stopped. Glad you decided to start over Wayne!
I'm loving this build, wished they did NCC1701A build. Great video from The World of Wayne very tutorial for beginners like me
Fellow Wayne here. Ordered my 1st pack and will be following this channel.
Absolutely spot on Wayne I hope you have better luck with this Enterprise D build than the last. ⭐️⭐️⭐️⭐️⭐️
I’m glad to see you starting from the beginning again. It was your channel that got me interested in building this particular model and staying to its original instead of drilling the holes and putting resin and all that so then I made my own channel to promote the build because I missed your videos, if you would like you can stop by my channel the Thompson model shop
I am so happy to see you making this from start to finish following the magazine. It was your first run of this which introduced me to your amazing channel. Keep up the amazing work. Much Love.
I have completely given up on my after... the unpleasantness... I think I damaged a panel beyond finishing and just feel so burned over the situation. So I am glad you are doing yours so I can see how it should all look in the end.
Glad you're starting over. Was loving the build before the problems.
Thank you for stating up the Enterprise D build again.
Really happy to see you starting this back up. I held on to my original build, and resumed it as soon as it released from fanhome. I just finished adding issue 22 on Friday.
Glad 2 see this bk, good job m8
That’s a good idea using oil 😊
A very nice restart to this model.
And with your previous model building skills you should be able to get a hopefully better build this time.
Stay safe all.
because of the rebuild... i am now ahead of you in one of these finally! all jokes aside i am looking forward to continuing and it's really awesome of you to start over for newer viewers. best of luck!
Oh, man! I loved that Q special effect at the beginning! Thanks for that! Don’t stop with the special Q effects.
You know what would be awesome? Build the Jupiter Mining Corporation Red Dwarf!
Decided to do this one despite all the issues you and others had. I noticed that you connected the blue/red wire for B to left vent but my instructions indicate to use yellow/green of B. Then you connected yellow/green of B to front left where mine says to use yellow/green of A wire.
Yer. I don't think it matters. I just need to remember when it comes to connecting them
So happy you are redoing this with Fanhome. Enjoyed getting to meet you at Wonderfest this summer. Keep up the good work.
Thanks Rick. I'm looking forward to be back there next year
I just finished the stages had the same problem when I didn’t over tight.. couple of screws going round and round. I did use 1 cm that worked instead of ap..
I've received two shipments from the re-start from Fanhome, just finished Issue 15, finishing off the upper saucer and starting the lower side. Surprised the hell out of me when all the lights on the upper side lit up like they were supposed to! I'm doing the UV resin mod for the windows, looks MUCH better than the individual clear and black plastic windows.
Just ordered this kit/subscription. Will reference your videos. Glad you shared. 👍🏻
After getting about halfway through stage one I paused because I have 100% decided that I will be gluing plastic parts (windows and such). I just don't like how easy it is to push on the plastic pieces and make them move after they've been screwed in place.
glad to see u doing the enterprise again
Good to see 👀👀 this back ,let's hope it gets finished👍👍
Wow. That's going to be a big model. Look's brilliant too. I like!!
I remember watching your first release of these videos. And you been infront of myself by 10 magazine's. Irony I'm now 10 infront of you. But I still do love this ship despite its flaws. And can see the changes you have made in your presentation of the new version of videos.
going to enjoy this build, missed the first one...
I am glad to be continuing this build, warts and all. however, I didn't get the corrected orange bussard part with issue 12 that people who were on that stage before fanhome took over got. so even though I wasnt going to paint anything, outside of blacking out some parts to fight light bleed, but now I think I may have to repaint those orange parts.
Seems like Fanhome replicated some issues that Eaglemoss had with their design, such as that grille on the topside of the command section, where there was a lit grille that doesn't exist on the ship (should be black like its opposing grille). I also see that in order to do an accurate build of the ship, you have to incorporate those mods from before, such as the clear dome over the bridge and using that defunct LED light from the grille to light it up. It's nice to see this model getting a redo, and I may have to re-subscribe to finish mine!
Well
It’s the same design, they have done nothing to change it
According to fanhome's site, it will have all the issues associated with the eaglemoss version as they buight up eaglemoss's inventory and reissuing it. Any manufacturing issues from the eaglemoss version are still present. Will still resubscribe to finish mine as well, but hopefully in the future we'll see fanhome revisit the model for a 2.0 version. I believe the off color problem on the nacelles will also exist. If my memory serves me right to that being a problem.
The front end of the nacelle is called Bussard collecter.
awesome build
I hate being a student and having no money...I want to build this so badly! I'll settle for watching your videos and pretending I'm building it until I win the lottery :P I hope this one goes well!
Well, Mr. Wayne, I thought you did a nice job of this first build, so please continue, until its all built? It is a very large kit, with all of the lights ... not sure how much yet, but just to have one of these! Bob from San Francisco, Ca USA
I work in the aviation industry and our big problem is getting hard to get screws ( stripped out or nearly stripped) out of aircraft panels. We have a compound we use that's a bit on the expensive side. It can be used to install screws without stripping out the head of the screw, just put a little of this on the tip of your screwdriver and it creates an incredible grip no matter what type of screwdriver, even with the poor screwdriver that comes with this step. The paste is Clover compound Grade D - 180 grit. Been using it on my model build.
Value grinding compound
I wish this was available in Australia. Looks partly inaccurate but il would still get it. So I’ve decided to make that same ship out of lego :)
Looks better than the last one
I got pack 22 Saturday just starting to put together lower portion of battle section
Thanks!
Thank you so much Shane
I love this eaglemoss set
I miss the Q power effects.
I know ypu want to build this basically stock but the painting you did on the warp nacelles was great.
I have to say I am impressed and if it wasn't for the fact I've run out of area space in my home. I would be very tempted to buy the one space I have is for the thunderbird 2 when I find one ready built as you know sadly the one you did is not available anymore but I will watch this. You never know I might win the lotto 😂😂😂😂😂😂😂😂
Probably a good idea to make all first section videos, thinking, it is a persons first build.
I'm having serious Deja vue here lol. I'll just bet you're looking forward to all of those pesky escape pods again. 😉
Oh yes lol
So glad to see you starting this build (AGAIN). Glad they finally came back. Are you building from new packs or is this the old packs deconstructed? I think I saw the magazine still said Hero Collector, so that begs the question did Fan Home make any adjustments or corrections to the build (we know there were some coloring mistakes before with the nav light on the engine and the EM field piece)?
Still think the individual windows are a bit silly. Don’t know why they didn’t do solid acrylic pieces like we had seen on the neck previously and here in the bridge section.
I know the goal is to show how to build it “as intended” but I know you had made some pretty good progress on making the UV resin windows, and that seemed somewhat easier then the time consuming window placement. Was there any thought of going back to that method? Do you plan on customizing again as you go (the copper grills, beacon light, escape pod detail stickers, etc)?
Anywho, great to see some Enterprise D. I look forward to this build and glad I caught up on the old videos once you provided them to me! Keep up the great work Wayne!
Nomim going to be building this as stock and following the magazines so viewers can follow along. I'm starting from scratch
Hey Wayne, glad to see you starting over. I watched your first build and started it myself until EagleMoss stopped. I have picked up from where i left off with Fanhpme at stage 56. Just waiting for the subscription to start. Are you going to be using the lifeboat transfers on this build? good Luck! I'll be following along for an insider tips. I also started the Millennium Falcon build, 1st packs arrived last week.
No. They look great but I found they come off really easily
I was hoping fanhome was going to do some improvements to the model before re-releasing this build.
Great video again!! Is this a complete do-over then? Not sure if I have mentioned this before during your old build is that I wish the windows were molded onto the reflector panel. After each saucer panel was completed and tested to determine if there is a light leak at the blackened windows. Still would put the individual escape hatches in as before. Are you still going to use Mike Lane’s accurate escape hatch transfers or vinyl stickers? Is the amber colored piece between the Bussard Collector and Warp Grilles the corrected piece? I am not sure what I should do with my Enterprise D build. The two battery compartments don’t work anymore, got a broken wire for the Nacelle and a cracked panel (original during the build and replacement). Think I may start over with it when I am either halfway or three quarters of the way through the BTTF DeLorean.
Yep. A complete do over
I'm so happy to see you are building it again I can't believe they kept clear on one side are you not going to paint gray and side ports red
It all needs painting
I'm really surprised you're building the Enterprise D again after last time.
Like video
Anyone else feel like its Groundhog Day? I feel like we've been here before... lol
So far it doesnt look like they made any improvements to the model, either. Still an absolute mess of wires on PCBs.
I cannot finish this build anymore due to my circumstances changing. If anyone in the comments wants to pick up where I left off I’d be more than happy to sell what I’ve got at a discounted price. I made it to stage 21 before they went out of business.
still trying to find a model kit that more closely resembles the 4t studio model (in particular the deflector dish area) as used in filming the later series of the TNG episodes and the odyssey battle in ds9 where you see it more clearly.
I haven't found a single model kit that accurately reproduces this.
I'm thinking this is what your looking for. It's quite costly but a pretty amazing model . www.heliosml.com/galery/enterprise-ncc-1701-d
Glad to see this back after the problems you had with the previous. Are you doing it fully vanilla or putting on any mods?
This will be vanilla
Are you starting another "D"? I was able to pick-up, with Fanhome, where Eaglemoss left off. Helping Hands are an invaluable tool for working on small stuff. I get mine from Harbor Freight. These work great with my N-Scale trains (:160) 🙂
So did they pick up the design for the Eaglemoss model or is it a totally new one? You should do a comparison. Did you see my tweet to build a custom dry dock with the old unfinished model with the Enterprise under construction? I think that would be an awesome series.
Yep lol. It's the same model. I don't actually have the old.one anymore so this is my do over
Nice one Wayne, did they fix the light bleed problems?
No but I will look at that as I go through the build
Great to see the D back, but is this just a re-release from E.M? Did they fix up the light leaks and simplify the wiring monstrosity? Plus are you going to be doing your UV window mod? That was awesome and looked so much better on the other one! 😊
As far as the light leaks, I would say no that issue has not been fixed since Fanhome has not modified tje build in any way.
Hopefully you will have fewer or no problems with this huge kit? I have been following this kit for some time now ...
This kit is riddled with problems
Will you also do the mods you have done to the previous Enterprise D like that blinking light on the bridge section, the copper paintjob on the nacelle grills or that transfer sheets for the escape pods?
No. I'm strictly making this one as stock. You may see videos later of me doing some stuff to it lol
It’s Buzzard Collectors Wayne not Bozzard 😂😂
Did you check the lights are in the right place, think you took one from the vent to the forward deck?
I will recheck
Wishing you the best of luck with this. You know how I feel about this thing. I see they didn't fix the vent that's not supposed to light up and they still have the wrong color of that band near the bussard collector which should be yellow not orange. I'm still curious how the saucer connects to the neck.
When Fanhome took over this build from EM, I am pretty sure nothing changed in the parts that had already been cast... as far as the front grill "orange" one I believe that in a future issue they send a replacement part that is yellow, i cant remember i ended up keeping the original copper one, but will probably have to get a replacement part for it later. Thnx Wayne for starting this up again, i remember in one of your live streams that you were still on the fence about starting this one again. It will be jice to finally see this one completed after 120 stages.
@@robertdexter1045 The original release had that piece as copper and then they sent us the orange one as a replacement which was still the wrong color. I just want to see one of these things completely built without modifications (which for more than $2,000 shouldn't need any mods) to see what it ends up looking like.
With mine, when it comes to the individual windows I used clear super glue for the clear windows and black super glue for the black windows, it cut out most of the light bleed
Will you be continuing your modified build also? And will new builders be made aware of some of the problems we’ve encountered up until now (during the time it was an eaglemoss product)?
No. I turned out what I wanted to do would not work
I was really hoping to see the continuation of your previous enterprise D not a complete do over
Are the instructions on line. I have just decided to build the Enterprise. My first pack should be here soon.
Yep. On your Fanhome subscription page and also mypartworks website
This is a dream build of mine, I grew up watching the series with my dad and would love to do this, however I am a perfectionist and the raised edge on the top of the saucer section where it meets the Stardrive section is stopping me from subscribing to the build. Any thoughts on this, other than me being extremely picky lol.
I'm just going to build and see myself. I know a lot of things get pulled in as the bottom panels go on
It’s Groundhog Day at WOW! 😂
With this and the Delorean I feel like I have gone back to 2016
So with you not going to carry on, to now taking it up again, along with build as is.
Is the video backed by Fanhome?
Meaning the known issues that definitely haven’t been addressed will just be there
This is the exact same model. Last time I attempted this I forgot that peeps would be following along with me a d I.left them in the lurch. That didn't sit right with me so I am rectifying that mistake
Surprised you didn't apply, or mention Mike Lanes Lifeboat transfers. And are you going to improve the lightning of the Nacelles?
Nope. I'm building this strictly as stock
I’m confused, is FanHome picking up where Eaglemoss left off, or is this a totally new build?
Both
Where did you get that Robbie the Robot I see on your bench? Is he still available? So very cool!
It's actually just a toy from Amazon
So does this mean you are not resuming your previous build of this when you originally started it, with your customisation of it as you were doing it? I've noticed the playlist for the previous Build the Ent-D model is gone.....?
No. The idea I had just wouldn't work as the frame blocks the light
Do you still have your Eaglemoss one? How do you feel this compares, is there any difference, or are they basically the same? Or is it too early to tell? I know EM had some issues with things like seam gaps.
I dk t have it anymore but these are exactly the same model
I thought you were doing your own build on this? Are you going by the magizines again now?
Yes
Wayne, to me its like you have done a time warp back in time starting this again. Will you be doing all the mods like you did on the other one?
No this will be strictly vanilla
It’s cool your restarting this with Fanhome now but what happened to the Enterprise that you was already doing?
Gave it away
I was looking forward to seeing you carry on where you left off, not start again.
It was a lost cause as the way I wanted to light it wouldn't have worked. The frame intersects the windows and there is now way to light the other side of it
is this worth a redo or continue from where we left off?
I'm redoing it as I don't have the original anymore
I got the 200 ML size bottles as you suggested hope thats the right size ? And where did you get that cool shirt ?
Ive hadn't for years. Some.coslay place online from what I remember
Wayne, is this a reboot of your Enterprise D project? If I recall, you were tried building this before. Am I correct?
This is me starting over from scratch building just as the instructions tell us too. I was trying to mod the previous one but the single light idea wasn't going to work
That's cool. It's good to see you building the Enterprise D again. I was wondering what happened to the other build.
I stop my subscription with Eaglemoss because of all the problems and the way over the top lighting light leaks has Fanhome made any changes to or is this just a continuation of the Eaglemoss build with the old Eaglemoss inventory
As a parts build I cant get my head around a star ship. I means the saucer is literally a 100 stages jigsaw. There will be gaps every where
Is this rebuild of the one you already started or the fanhome one from scratch Wayne?
Fanhome one from scratch
@@WorldofWayneUK do you think there will be any noticeable upgrades or changes? I remember you talking about terrible light bleed on the saucer section at one point
@@TheDog8873 nope it's the exact same model
@@WorldofWayneUK shame, common sense says a second bite of the cherry would be the perfect opportunity to iron out the creases
How many issues is this? I can’t see from the website. It says each ‘package’ contains several stages but doesn’t say how many packages there are, unless I’m missing it.
I went to the site and saw the millennium falcon is about to be released so…
120 stages. Roughly 30 packs
Can you point out the similarities and differences between this and the other Enterprise you were doing?
They are exactly the same
sadly my country is not on the list of country fanhome is covering at least for the moment
I'm sure it will be available soon
@@WorldofWayneUK i hope so
I thought you already built this?
What happened to your first build of the Enterprise-D? Weren't you modding it?
Yep. It didn't work out as I had planned
what oil do use to help the screws?
Just a regular 3 in 1 oil
thanks. look forward to the next instalment. hope you get to finish it this time
So Basically Fanhome haven't addressed any of the issues that the Eaglemoss build had ???
This is the same model
@@WorldofWayneUK
Are you gonna build as is ?
Or you gonna mod it like you planned with the EM model ?
@@garyrichards6079 as is. The mods I was going to do won't work
I would like to continue from issue 13, unfortunately fanhome cannot or does not want to send it to the Czech Republic
I wonder if they will expand
@@WorldofWayneUK I try to annoy them every month, but if there are few of us in the Czech Republic who haven't finished it, then I probably don't have a chance to finish Enterprise
A bit hard to get in Australia
Why couldn't you continue the other build Wayne or is this a more superior model than the last one as it had flaws ?
I attempted a mod that didn't work and effectively I destroyed the build
@@WorldofWayneUK Oh jeez wayne I bet you were devastated, sorry about that mate.
Hallo my Dear, do you upgrade this Lady too?
I still fancy doing this but is £1300± really worth it so expensive
Them windows put me off still
Order the Mac version instead 🤓
Is this the eaglemoss kit that evaporated into thin air a year or so ago?
Yes
@@WorldofWayneUK So did they change anything, or can I basically skip the first 22 odd parts I already had assembled which would be immensely helpful. I'd built the saucer section previously, more or less. With your guides, funnily enough.
@@OanKnight nope. Its all the same
@@WorldofWayneUK That is actually probably the best news I've had all year. Thanks wayne!