I Got the same kit after the stock fan couldn't cool fast enough with Sonic Pro. Any chance you can share slicer settings for it (Orca slicer or Cura)?
I use the standard profile on Creality Print for the "Fast Cr10Smartpro" with a little tweaks on strenght, infill,... I tried Orca Slicer for multicolor in same layer, it worked mostly fine but have some layer shifting when it have lot of travels I think my accelerations are too high. Can share it also when I fixed it. Did you sent me an email?
@@Frikarte3D No, but I will, and share my profiles so far for pla / pla plus, PETG & TPU in cura, and PLA/Plus for Orca. Got good results for PLA, but not able to print PETG properly in Orca. I havent installed the high flow kit, but do have an upgraded nozzle, so differences should be max speeds and flow which arent fully optimized yet. I found that calibration in Orca is very easy (except PETG for some reason)
This kit is for high-speed printing with Creality 3D printers, I bought a Sonic Pad that made my Cr10 Smart Pro from printing at 50mm/s to 200mm/s, with that kit I can print at 300mm/s without losing quality. Will do speed tests in the next days. It works on any printer that have an Sprite Extruder
Cant wait to see the speed printing results. My CR10 Smart Pro prints great, but very slow. Would love seeing comparison times since I'm thinking if I should sell it and buy a corexy printer or upgrade with the sonic pad and high flow kit
This is the printer at 200mm/s, it's 4 times faster than stock one. ua-cam.com/users/shortsTcT4xPeThZc?si=nAb-Wgj9CiITYpJg The printing speed is not accelerated. Need to reserve time to do some speed tests 🤗
Thank you for your reply, I just ordered the kit to install on the Cr10 Smart Pro/Sonic Pad and wanted to buy some spare nozzles, if you can confirm the model I would be very grateful.
Hi! Yes, I have one spare 0.6 that comes with the kit and they are the Spider High Speed Nozzles like the ones I shared before, I have this kit for 6 months now (didn't had time to post the video till now) and after hours and hours of print didn't notice any signal of nozzle failure yet
Would have been nice to show how fast it prints with the new high flow upgrade.
Yes, I'm preparing a video of some speed tests 🤗
@@Frikarte3D how fast have you gotten it up to? Could you share your acceleration settings?
Very interesting! I wonder if they sell them for Ender 3 V3 SE’s🤔🤔🤔🤔
I think the hotend is already improved on the V3 🤗
@@Frikarte3D that's nice! I didn't care about those specs when I got it. I was thinking about how reliable and how fast it was.
@@Thor4Mayor Just assuming it, didn't know what hotend have this machine, or what's under the cover 😅
I Got the same kit after the stock fan couldn't cool fast enough with Sonic Pro. Any chance you can share slicer settings for it (Orca slicer or Cura)?
I use the standard profile on Creality Print for the "Fast Cr10Smartpro" with a little tweaks on strenght, infill,... I tried Orca Slicer for multicolor in same layer, it worked mostly fine but have some layer shifting when it have lot of travels I think my accelerations are too high. Can share it also when I fixed it. Did you sent me an email?
@@Frikarte3D No, but I will, and share my profiles so far for pla / pla plus, PETG & TPU in cura, and PLA/Plus for Orca. Got good results for PLA, but not able to print PETG properly in Orca. I havent installed the high flow kit, but do have an upgraded nozzle, so differences should be max speeds and flow which arent fully optimized yet. I found that calibration in Orca is very easy (except PETG for some reason)
@@ShmulikPrimes I didn't tried PETG yet, only printed PLA and ABS for now
@@ShmulikPrimes what kind of nozzle are you using? And do you have a good profile for orca with sonic pad?
what does this kit help with? im sorry im new into 3d printing
This kit is for high-speed printing with Creality 3D printers, I bought a Sonic Pad that made my Cr10 Smart Pro from printing at 50mm/s to 200mm/s, with that kit I can print at 300mm/s without losing quality. Will do speed tests in the next days. It works on any printer that have an Sprite Extruder
@@Frikarte3Dwtf, the sonic pad really increased the speed that much without compromising on quality, I will need to invest
@@Polkem1 tried on a Cr10 Smart Pro that has a decent build. Gonna try on my 3 yo Ender 3 Pro to check what speed we can achieve 🤗
Cant wait to see the speed printing results. My CR10 Smart Pro prints great, but very slow. Would love seeing comparison times since I'm thinking if I should sell it and buy a corexy printer or upgrade with the sonic pad and high flow kit
This is the printer at 200mm/s, it's 4 times faster than stock one. ua-cam.com/users/shortsTcT4xPeThZc?si=nAb-Wgj9CiITYpJg The printing speed is not accelerated. Need to reserve time to do some speed tests 🤗
Hi, which nozzle model is now being used by this kit?
I'm not at home to check it, but I think they are High Speed Nozzles like this one s.click.aliexpress.com/e/_DEPQBG9
Thank you for your reply, I just ordered the kit to install on the Cr10 Smart Pro/Sonic Pad and wanted to buy some spare nozzles, if you can confirm the model I would be very grateful.
Hi! Yes, I have one spare 0.6 that comes with the kit and they are the Spider High Speed Nozzles like the ones I shared before, I have this kit for 6 months now (didn't had time to post the video till now) and after hours and hours of print didn't notice any signal of nozzle failure yet
Ok thanks, I always prefer to have spare nozzles, thanks for your answers.