Zhiyun Crane 2S | PROBLEM SOLVED!!!
Вставка
- Опубліковано 22 сер 2020
- ⭐️ BUY the Zhiyun Crane 2S: geni.us/P4ko (affiliate)
The Zhiyun Crane 2 S had one major problem - until now! Is the Zhiyun Crane 2S the best gimbal for medium sized mirrorless cameras and DSLR setups? Can it handle small cinema cameras like the Canon C100mkii, the Black Magic Pocket Cinema Camera 6k, and the Panasonic S1H? I was looking for something a bit larger than the Weebill S and really liked this gimbal - except for one problem. Then I figured out how to solve it.
Let’s take a closer look at the #zhiyun #crane2s 3-axis #gimbal and see if it’s the right gimbal for you!!
⭐️ BUY the Zhiyun Crane 2S: geni.us/P4ko (affiliate)
⭐️ BUY the Zhiyun Crane 2S Kit: geni.us/TAePOg (affiliate)
PGYTECH OneMo Photographer/Videographer Backpack:
Review: • CAN YOUR BAG DO THIS? ...
⭐️ BUY the PGYTECH OneMo Backpack: geni.us/MPJlvaB (affiliate)
Cameras used in this video:
⭐️ Sony A7iii: geni.us/tgtcanoneosr (affiliate)
⭐️ Sony a6400: geni.us/HaLIEb (affiliate)
⭐️ Canon C100MKII: geni.us/m5AG (affiliate)
Lenses used in this video:
⭐️ Viltrox 23mm f/1.4 (Sony): geni.us/NBV8 (affiliate)
⭐️ Viltrox 85mm f/1.8 Mark II (sony): geni.us/MAJBqI (affiliate)
BECOME A TECH GEAR TALK SQUAD MEMBER!
ua-cam.com/users/techgeartalk...
SUPPORT THE CHANNEL FOR FREE:
By shopping at B&H: bhpho.to/2wxe5xU (affiliate)
FOLLOW ME:
Instagram: / techgeartalk
Twitter: / techgeartalk
Facebook: / techgeartapatreon: / techgeartalk (thank you for the support!!!) - Наука та технологія
⭐️ BUY the Zhiyun Crane 2S: geni.us/P4ko (affiliate)
⭐️ BUY the Zhiyun Crane 2S Kit: geni.us/TAePOg (affiliate)
What's up everyone?! I hope this review of the new Zhiyun Crane 2S was helpful. Did you like it? I wasn’t sure what to expect from this gimbal because I wasn’t sure how different it was going to be from the Weebill S. Ultimately, if you prefer this form factor and need more capacity, it’s a great gimbal (now that I moved the motor)
Would this work for your setup? If you have questions about a particular camera+lens combo, ask me below. Would love to know what you think, good or bad. I am grateful in advance 🙏
Thanks
👍
great video, I bought a zhiyun mini dual grip and when I try to connect it to my crane 2s the screw that comes with the mini dual grip is too small for the hole of the crane 2s, however I could see that you used it in this video, any help?
Great job and awesome to see Terry on the video... Love the B-Roll
Thanks Jake!
Thanks so much Jake! 🙏🏻
This looks like the type of gimbal I'm looking to upgrade to.
And thanks for the amazing b-roll!
Always appreciate your feedback Thomas!!!
I love the bonus footage!
Appreciate the feedback very much 🙏🏻
Is the crane 2s overkill for a Sony zv1
Thanks for these amazing videos ♥️♥️
You are very welcome. Grateful for your time.
Using the crane 2 in lock mode with iPhone (Z-Play) remote, but it seems to occasionally pause and not always have smooth motion - any suggestions?
I got this 2s. The quick release base latch worn lock until I try 100 times. And if I press that bottom below the base while moving the latch it give up completely. Not sure what am I doing wrong. Any help will be nice
I just bought the Crane 2s. My LG Stylo 4 is not compatible with ZY Play so I cannot activate my gimbal. Other than activation, what all will ZY Play be required for with the Crane 2s?
I just got my 2S and although I’m not learning anything here, I still like watching your videos 😁
It at least keeps me entertained until I can go out and put mine through its paces 👍
Thanks JT and CONGRATS! Ironically, I'm actually watching your video rn!!! 😂🤣
Tech Gear Talk My comment to your comment on that video is a funny coincidence too!
I WAS going to go up to Shaver Lake (which I only pretend is named after me) to shoot with the Crane 2S but all the lakes are burning up as we speak. I posted some crazy photos on my insta story.
Super devastating fires right now 😥
hi dear . have Fujifilm XH1 with 16-55 lens , is crane 2S good with this camera , thanks in advanced
hello! thanks for the amazing videos i learnt so much ! i have a question .. i m considering buying the m50 or m6 mark ii but i m confused which lens would be suitable for stills and overhead videos ( crop wise i would be using a camera arm on my desk only) thanks a lot waiting for ur answer !
Hi there. I would get either cameras with the kit lens because of: ua-cam.com/video/z-x-d-K9Jfw/v-deo.html If you need to upgrade at some point, you'll know what focal length. Thanks for being part of and supporting the channel! Thanks for being part of the channel!
how much tall is the Crane 2S with out the base and all lock? i want to know how mcus space i need to pack the Crane 2S?
Is there any reason why the cable connect doesn't work with recording from the gimball on the a7iv
Can u plz Tell me is it suported canon t7i
Very informative video,thanks.
you got a new subscriber!
I really need your advice though,i work near a zhiyun repair center and have some friends there and I can get a like new,refurbished crane 3s for 380€ which is a great price, i have a weebill s now but when i want to use my a7iii with a battery grip it doesn't work.
I also need to look to the future if i buy some bigger lenses,that's why i want to upgrade from weebill s.
And now i watched this and i don't know if this one is the right choice ore 3s.
What do you think?
Can you explain how you dealt with the wiring once you removed the extension arm? Got everything off then struggled figuring out how to get the wiring in a position that I could reinstall and assemble.
Hi Russell - it fits into the area with the adhesive foam on the horizontal part. DM me on IG and I'll show you.
thinking of buying it for zv e10 for vertical shooting
Does it work for a7 iii? Because when I plug it up it's not getting the functions to change the settings from the gimbal. When I press record from the gimbal the camera does not record! please help! I use the cable and it's charging but it's not giving me the option to control the camera from the gimbal. I've the gimbal set to sony! any help?
Thanks for the video! Is the 2s is still good in 2022 and capable of handle the Fx6?
No it can't. Cranes 3s or any of the newer DJi gimbals.
The copy that I received from amazon three days ago already has the rear motor installed at a 45 degree as opposed to being at 90 degrees that I have seen in most of the videos. I think the new batch that Zhiyun ships already have the rear motor mounted at 45 degrees.
Hi.. May i know what bag that u mentioned u r using with the gimbal? Wanna get one!
Hi. Check the description for a link. I’ll add a card too!
I have the crane 3s and I’m having issues with the camera clamp lock .... it slide around when is fully tight .... I’m returning it to get the crane2s instead ... I have a Sony A 6600 with a sigma 30mm f1.4 lends ... do you think if that’s a good move to make???
Hi there. I would even consider the weebill s
i like that you are using the PMND filter on the cameras 👍👏
What lens did you use with the c200? Can you do a review with the c200 and the crane 2s with a 18-35
Used the 10-18 as well. The crane 3s is really a better option for that camera ua-cam.com/video/VWrs2rvOU14/v-deo.html
How well does the C200 fit the 2s? Just want to check whether it has proper clearance in the back, or is it like the crane 2 where you can’t invert it and you can’t really do any other mode than PF.
Hi Harry. If that is your camera of choice, I would look at this: ua-cam.com/video/VWrs2rvOU14/v-deo.html (it's a much better fit)
Tech Gear Talk thanks for the quick reply. I thought as much. I ask because it’s important to me to keep the weight and footprint down to the minimum, and thought the 2s may just be enough to handle it, I would have accepted some compromise - like not being able to go inverted but still being able to go into F & POV mode and tilt enough before any motors hit the eyepiece. Most of the shots I’d be doing would be simple tracking, and some amount of tilt.
I still like form factor of the Weebil S and The Crane 3. Good work Sagi and shout out to Terry as well✊🏿
That is my preference as well 👊🏻
My man!
what are your thoughts if I paired the 2s with my c200 & sigma 18-35?
wouldn't be my first choice. I'd go for the ua-cam.com/video/VWrs2rvOU14/v-deo.html
Seeing you have the feyuitech ak4500 in the background, which one would you recommend?
Personally - this one.
Man. Zero dislikes! That told me something about the quality and thoroughness of this video. Well deserved!
I really appreciate you taking the time to watch and for the kind words. Thank you for joining the community 🙏
I use the crane M2 with a Sony ZV1 and I cannot access the ports on the side of the camera for the microphone or the HDMI out.
Which one do you recommend for Canon EOS R? Always top quality reviews from your channel! Thanks 🙏
Hi there. If you want this type of form factor, the Crane 2S is a great option. Otherwise, grab the Weebill S (it's my gimbal of choice for setups that work on that size). Hope that helps.
Hey Hello! I need to Lock the F mode, because I have the gimbal on a double handgrip, I cannot push the botom ... how can I do? Is possible?
I had this gimbal for less than 6 months and it just stopped powering on. Any ideas?
I would definitely contact them.
Great review! Question: at 08:57, what camera did you use? Canon C100 mark ii?
Thank you - yes, it was the C100 MK II
@@TechGearTalk Wow the quality is amazing... I’ve been thinking of getting one despite its age. 4K sensor!!! Do you use it often?
Your video presentation is very m8ce and clear.
How’s about Sony fs5?
Hello sir i have been following you since long thanks for the reviews and all. I have a question and if a video can be done it would be of great help. The question is: Is the canon 77D worth buying for video purpose?
Thank you for the support. Yes the 77d would work for video is that's the one you want.
Does it have more room for bigger cameras compared to the ronin s?
I believe so. (I don't have the RS right not to compare side by site)
hi I have a problem with my gimbal, the hadle shakes and rotate then goes to sleep everytime I use it, what seems to be the problem?
Hello. Not sure if your still using this gimbal. Question. Did you ever have connection problems using the cables with a7siii or a7iv? I'm having a instable usb c to usb c connection from gimbal to camera
A7s3 and many Sony cameras have minimal controls from this gimbal. Only stop and start record.
A7iv isn't even on the supported list of cameras. Read thr compatibility documents for any gimbal you want to buy. Every manufacturer puts that on the gimbal product page.
Great review! How does it stand against the Ronin S?
Thanks. It's smaller and lighter. I really liked the Ronin S - it was just really big and heavy.
I'm using a bmpcc6k with tilta cage and 18-35 and just got this gimbal today and it was working fine but I went and did auto calibration and it's been vibrating non stop idk what to do honestly I love this gimbal but can't keep it if its violently vibrating
Hi, is the problem solved? if try auto calibration again in other ways in ZY Play, or initialization.
How much the payload capacity? Anyone know?
Tq
Nice! Can you control the focus via the wheel on the C200?
Hi there. I have not tried because it would be virtually impossible for me to handle that rig with one hand.
@@TechGearTalk haha sure :) but thx
Hey Sagi, firstly I would like to thank you for your videos they are very helpful. So I just got a new Crane 2S and a Sony A7S3, I'm super confused about connecting both of them, I'm using USB C - C cable, it seems to be working but I'm unable to figure out how to control camera operations from gimbal such as start/stop recording; I searched all over the internet and just came across more beginners facing the same problem but no answers in sight. Hope that you could help, thanks in advance.
I have the same problem, its not working at all! Did you find the solution?
any update for sony a 7iv ? same problem im facing
You all should read the gimbal compatibility documents on any gimbal you want to buy.
It clearly states that for a7s3, you cannot control functions from the gimbal. Additionally there is this instruction:
Please select "PC Remote" for
your camera's "USB Connection".
(To open a7s3 PC remote
control, go to "Menu" and do the
following selection : "Network" -
"Transfer / Remote" - "PC remote
control" - "Open")
As for a74, that camera isn't even on the list because it came out after the gimbal so there is no requirement for them to support functions.
Great video. Thank you.
Thank you Andrew
I'm confused between buying zhiyun 2s & ronin sc2!
first time in this channel, pretty gutten so far !
Hey guys, if you could only have one would you recommend this or the Weebill S for the Sony A7 line?
Probably the weebill S because it's smaller and I really like the handling. ua-cam.com/video/urugXDg3hnM/v-deo.html
@@TechGearTalk Thanks so much!
Great review. I'm new to the gimbal world and purchased a dji ronin sc. Although I loved the build and look, it annoyed me as it kept drifting etc. I was dead set on the weebil s but have now seen this 🙈🤣. Which should I get? Weebil S or Crane 2s? Pros and cons in comparison.
Good idea. Personally, I use the WBS more than the C2S because I like the form factor. But of course it depends on what you're carrying and whether it will fit with the WBS
@@TechGearTalk I've decided to wait on Ronin new s2 announcement as I have heard that Zhiyun quality isn't great and can lead to things breaking. Just have to sit tight until October I guess
so with having a canon sl2 with a (heavy) sigma 18-35. what gimbal is best? is canon sl2 and sigma 18-35 setup too heavy for weebill s? thanks
No, it’s not too heavy. I just use counterweights.
@@TechGearTalk where do i find the counterweights
Smallrig makes them. You can use a cage or get a smallrig quick release plate for this gimbal. Look at the description.
@@TechGearTalk I'll prolly get the weebill s
Does the POV mode work while in underslung mode now?
I never tried. But I just did a test for you - it worked.
what is the best Gimbal for a Canon M50 in your opinion?
I really like the M2 with smaller lenses ua-cam.com/video/UrKfZuEYUC8/v-deo.html or weebill s with larger ones ua-cam.com/video/urugXDg3hnM/v-deo.html
Love your stuff man..❤️
Appreciate it Keith!
Love too!
How to rectify X display in crane 2S
Check the B-roll in the last of the video, it's sooo stable! Love your review!
sir please help..
Sony A 7iv record button of crane 2s is not supported. any clue for that?
You might have to wait for the update because a7iv is a fairly new camera. Or try using another camera option I saw a UA-cam comment where it worked.
Nice video. Thanks. 2S Looks good. Wondering if this would be best for a Canon 90D with a sigma 18-35. Thanks.
It would definitely work. I would also consider the WBS ua-cam.com/video/urugXDg3hnM/v-deo.html
Tech Gear Talk thanks. Just watched the video and will definitely consider. What are your thoughts on the Zhiyun v DJI?!
I like the dji app, but I love the weebill s handling
Tech Gear Talk great. Thanks.
Just bought the crane 2s but it's stuck in sleep mode. How do I fix it?
Is it balanced?
Want to be your student after watching this content 🙏🙏🙏 especially the bonus video 👌👌👌! You're awesome 😍😘😘
Thank you so much 😀
My batteries either are defective or not charging… what should I do ?
Killer review, AS USUAL!!!
Thanks for all the help! I think there was as much “you” as there was me 😂🤣
Will this work with bmpcc4k?
Sure will
Does crane 2s fit for Sony a6400?
Absolutely. You probably don’t need something this big. The weebill s would be great. ua-cam.com/video/urugXDg3hnM/v-deo.html hope that helps.
Thanks for the video! Would love to see a review of Z Cam E2 with your style! Since it's very cheap compared to other cinema cameras! Thanks
Great suggestion!
Great video as always. Video and Photography is only a hobby for me right now so I won't be getting this. Any thing I purchase I try to go to your links. You're the best.
Thank you for both the kind words and support. Very much appreciated.
Thoughts on the ronin s?
Here you go ua-cam.com/video/xuzI4Rxmkh8/v-deo.html
This or the Weebill S for my Canon 6D Mark II?
It seems that the features set is very comparable, I would focus on form factor for your needs. BTW, I have a Weebill S and I love it.
Isaac Roufs not gonna lie to you: I believe the Weebill S is good enough for my setup and I love the small form factor as well. Just wish I could stabilize it more using the dual grip like this new Crane.
Hi you two. First, yes - totally agree that the form factor on the WBS is awesome. You could attach the transmount handle if you wanted to. It will attach with no problem. Hope that helps.
is the gimbal good for an canon 5D mk IV. ?
It will be a great setup
I first thinking the Zhiyun crane 3s but is to big for traveling ! So i was waiting for an other gimbal and now i see thise one !
My CRANE2S has vibration when I put it at a low angle and how to fix it
I have the same problem… Could you fix it?
That gimbal is a beast
No doubt!
May I ask some of the advantage or disadvantage of removing the roll arm on the crane 2s? Maybe making it a content would be a good idea tooo :)
I knew these locations looked super familiar, salute from Cleveland lol
Good eye! Thank you for watching 👊🏻
Where is this building? street and city?
At what point did you address the isue in this video, all I saw was you talking about features and your backpack?
He mentioned you can move the arm and thus the motor gets lowered. He even demonstrated in the video.
Please suggest me gimbal for my sl3🤩
I use this one: ua-cam.com/video/urugXDg3hnM/v-deo.html
I've had my Crane 2S for a couple days now. It works great with my BMPCC4K. I keep looking for more videos on the 2S for settings some may be using, and general fun in looking at good footage.
thanks so much for sharing (I didn't have that camera to test)! Appreciate you checking it out. Thanks for being part of the channel!
curious to know if you modified it so you can see the BMP screen? I tried but couldn't get it off...
Hey! I have a few questions. Is it worth getting a follow focus motor or will I he able to focus by connecting the camera to the gimbal and using the focus motors of the lens to focus? I have a sigma 18-35. Secondly, is there a way to work around the gimbal motor blocking the camera screen?
I think the rear motor is good at high position. It is easier to for the motor maneuver. The screen is block occasionally, but i want smooth movement ALL THE TIME.
Especially when u need to tilt the handle forward.
good point.
Anyone else have an issue with locking the base plate? Just got mine and the base plate won't lock it into place. Such a basic thing. Brand new and this issue has me totally baffled and disappointed.
Love that intro
Appreciate it. Tried something new.
Its Not turning on crane 2s. whats problem betteries are full😢
Nice video, not a video guy but I would buy this if I was
Thank you for checking it out!
My transmission plate is stuck to the transmitter out of the box!
Fantastic
Can you do a video of fuji xa7
Still trying to get one
Wanted to see what it looks like when running 👌🏽
Check out the bonus footage.
@@TechGearTalk i did that's why i threw up the 👌🏽
Ohhhhh, now I understand 🤦🏻♂️
First one to comment ☺. Love your videos as always 👍 legend says Sagi will give heart for the first comment.
FIRST!!!! Appreciate the support my friend.
Great review, I recently picked one up and I'm loving how insanely smooth it is. However, the motors are really annoying and produce a high pitch whine whenever using it with my a7iii and 16-35mm GM
Thanks Chris. Curious - Is the noise at all angles?
@@TechGearTalk It is yes. It's balanced correctly and I have also run the auto-tune.
@@ChrisWilmshurst how did you fix the problem?
@@cata17422 I haven’t been able to unfortunately
My gimbal just says axis lock?? Any help
It should mean that the physical axis lock is engaged for one of the motors. Toggle it.
@@TechGearTalk idk if thats the problem. It also says try again with an X after i try and auto tune it
For some reason I can't activate the gimbal. I followed all the instructions but it still gives me an error message and says that I have to contact ZHIYUN support. -_-
Go to the website and download the latest firmware and installer no Xr you do it - try to active again
@@TechGearTalk but I updated the ZY Play app in the play store right before i wanted to set it up because I still had one of the older versions where the crane 2s wasn't even included.
I can't wait to hear a comparison of Weebill S vs Crane 2s. That motor reposition is awesome.
Comparisons are coming. Thanks for the feedback about the motor repositioning.
El problema mio aun no me lo han resuelto
Lovely
Thank you 🙏🏻
Hi Sir,, always present...
Appreciate you.
That looks absolutely brilliant. Honestly I thought something like this would be in the price range of $1200, but at $600 it seems like a complete steal.
Thanks so much. If you don't need this much capacity, check out: ua-cam.com/video/urugXDg3hnM/v-deo.html
Tech Gear Talk Thanks, I’ll check it out!
Last week brought combo kit for 230 in us. What a black friday
Great video.
Happy to see you guys wore masks when out, even in remote spots.
No games played here sir lol
All business!
You look like always buy twice, you got two crane s2!
Moral: buy nice and twice if you can afford 🤣👌
Awesome comment 🤣😂
Bag cost
Link in description