Red Brake Warning Light Stuck On Dash?
Вставка
- Опубліковано 15 жов 2024
- Come along as I check out concern of red brake light illuminated on dash on a Ford F150.
Enjoy & remember-
If your gonna do it, DO IT RIGHT!
Thank you for all the continuing support! We appreciate it! #CYA
-NZ & family
Interested in working with NZ Diagnostics or want to contact us?
Email: nzdiagnosticsllc@gmail.com
Disclaimer:
Due to factors beyond the control of NZ Diagnostics, it cannot guarantee against unauthorized modifications of this information or improper use of this information.
NZ Diagnostics assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. NZ Diagnostics
recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals,
lubricants, and/or any other tools or equipment seen or implied in this video.
Due to factors beyond the control of NZ Diagnostics, no information contained in this video shall create any express or implied warranty or
guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained is at no fault to NZ Diagnostics.
Black tape works great. Back in the days when real people drove cars and trucks we didn’t need “what my father called idiot lights.” You put the key in start, push in the clutch release the break and go.
that's what I'm using for now, electrical tape to cover it. lol
Thank you so much buddy ! You are the man !
Great job on the video, keep up the good work, do you by chance have a link to those wire/plug probes and connectors ?
Great video buddy. As an electrician I need to know where you got your voltage tester
Harbor freight
It's actually called a power probe, only works on 12v systems
Want to hear something weird?, One night while walking by my shed where my 93 F-250 was parked one brake light came on slowly and dimly for only a second then went off slowly one time, the truck hadn't been driven in months and the battery was so dead it wouldn't even click when I turned the key to check for power. Is this a case of a ghost in the machine? My theory is built up static from wind that lit the bulb...what else could it be?
Low volatge.
Thanks for the reply....I'm curious though, why just once and never again?...shouldn't it be doing it all the time?...what causes it to activate when it does?@@nzdiagnostics2010
low voltage? what switch was turned on and what activated it? why did it only do it once?@nostics4991
how do you do this with a standard multimeter?
My ABS light is on as well as my park brake. Is one system connected to the other?
I have the same problem with Toyota Yaris 2008 model, if you have already fixed the issue, please guide me too :)
I don't understand what you did to fix this.. it's unclear
Instrument Cluster Board needs repaired or whole unit replaced. It's more cost-effective to have the board repaired.
@@nzdiagnostics2010 It's probably me, but I don't understand how it was showing one number and then all of a sudden it's showing 5? did I miss a step? Did you swap out a switch? I'm not very electrical so, again, maybe it's me.
@Seek-Wander-Find I'm proving out that the issue is within the cluster electrical board. I can understand it's difficult to follow if you're not familiar with technical diagnosis.
What do you mean by "cluster?"
"Cluster" is the combination meter or where all the dials are. Speedometer, warning lights, oil gauge, battery, ect.
Yes, as Ryan stated.
So the cluster sends the 5v and not pcm?
Yes.
Hi NZ DIAGNOSTICS
Can you please provide the name of the tools used to fix the issue on the video Red Brake Warning Light Stuck On Dash
have the same issue, the brake fluid switch has been replaced, the cluster has been checked and works properly.
thanks in advance, I will be waiting for your response.
I had the Circuit board repaired on the instrument cluster.
Only applies to three wire sensors.