A slice between cylinders 3-4 helps with sealing on the manifold. Would you upgrade to a divided manifold? T3 or T4? Taking notes for my m20 turbo as well. Clean build!
Thank you. I’ve actually got the manifold off the engine at the moment resealing it. I’ll slice the flange between 3-4. I was thinking about doing that but you convinced me. Next I’ll probably fab my own manifold and use a divided T3 or vband flange.
nice build, ive got a chance to pick up a 325ix here too but a bit worried about reliability of the awd platform... any issues with the transmission/transfercase so far?
Not really but I also don’t launch it or clutch dump it. Make sure to use the X5 guibo on the front diff to push the front driveshaft into the transfer case for more spline engagement.
Servus, ich hätte eine Frage. Ich hab einen e34 525iX. Würde ihn auch gerne auf Turbo umbauen. Finde aber keinerlei Info über das Getriebe. Gibt es ein 6 Gang Getriebe mit Allrad? Das man umbauen kann? Oder kann man das 5 Gang Getriebe länger übersetzen und verstärken? Liebe Grüße aus Deutschland
How does the AWD coupling handle the jump in power? ive read quite a bit saying they arnt made to handle anything over stock so curious how yours is holding up
It’s not the coupling you have to worry about as much as the front differential. I have a couple spare because I was anticipating breaking them. So far nothing has broken and I’m pretty rough on it. Hard launches etc. Besides an upgraded clutch the only other mod I’ve made to the drivetrain is shimming the front driveshaft into the transfer case more using an X5 guibo.
Pretty SWEET build. I have an '88 325iX that would be even more fun with some added power. Keep the videos coming... and yes, some take it for a spin videos would be cool! Would be interested in more info on that GM wasted spark conversion too.
Awesome work!. Can you explain how you wired the wideband? Do you keep the factory o2 sensor? Is the wideband wired to the factory wire harness? Thanks in advanced
15:50 "this being a journal beraing turbo it only really needs a slight drip of oil going into this" -I thought ball bearing turbos needed less flow and journal bearing turbos needed high flow?????????????
i've owned my 1933 Ford 325iX with a spankin' brand knew 3 speed emmanuel!!!!! The iX uses epik lulz and bowlz to create a wild minimal flavor that Spartan 117 can't stand! He would rather get a 10000 whp Chevy Kilonova with 4 mini jet engines on the back and deja vu has
Very nice video. I have an M42 powered 318i from 1985 (previous owner had the engine swap done) and while not everything from the video applies to my engine, I find the intercooler placement information very useful as I'd like to keep AC if I turbo my car.
Awesome video, definitely need a video of some pulls!
A slice between cylinders 3-4 helps with sealing on the manifold. Would you upgrade to a divided manifold? T3 or T4? Taking notes for my m20 turbo as well. Clean build!
Thank you. I’ve actually got the manifold off the engine at the moment resealing it. I’ll slice the flange between 3-4. I was thinking about doing that but you convinced me. Next I’ll probably fab my own manifold and use a divided T3 or vband flange.
nice build, ive got a chance to pick up a 325ix here too but a bit worried about reliability of the awd platform... any issues with the transmission/transfercase so far?
Not really but I also don’t launch it or clutch dump it. Make sure to use the X5 guibo on the front diff to push the front driveshaft into the transfer case for more spline engagement.
@@85garage great info, and good to see they can survive some boost! thanks for getting back to me, appreciate it
Servus, ich hätte eine Frage. Ich hab einen e34 525iX. Würde ihn auch gerne auf Turbo umbauen. Finde aber keinerlei Info über das Getriebe. Gibt es ein 6 Gang Getriebe mit Allrad? Das man umbauen kann? Oder kann man das 5 Gang Getriebe länger übersetzen und verstärken?
Liebe Grüße aus Deutschland
Er ist Ami, wie zur hölle soll er dich verstehen 😂
@@florider_hd jeder trottel kann auf „übersetzen“ drücken. Oder bekommst du das nicht hin?😅
how did you lower your ix?
Bilstein B6 struts and H&R springs
Bonjour la transmission ne casse pas?
Merci!
what's your instagram!!!
@eightyfive_garage
What is your spark and dwell setting values?
I used the settings on this page:
www.diyauto.com/manufacturers/bmw/generations/5-series-e28/diys/wasted-spark-install-by-brad-d
I’d love to know more about how you wired wasted spark and setup your AC! Thanks!
Nice car bro!
Thanks!
Where you live? Because omg it sounds gorgeous out there!
Great video. Are there any updates on that engine management system?
How does the AWD coupling handle the jump in power? ive read quite a bit saying they arnt made to handle anything over stock so curious how yours is holding up
It’s not the coupling you have to worry about as much as the front differential. I have a couple spare because I was anticipating breaking them. So far nothing has broken and I’m pretty rough on it. Hard launches etc. Besides an upgraded clutch the only other mod I’ve made to the drivetrain is shimming the front driveshaft into the transfer case more using an X5 guibo.
Hello first of all, really nice build. I had a question on how you wired the mac boost controller cause I'm also trying to rum it.
Thanks. I just wired it directly to my megasquirt and configured the settings for boost controller. Polarity doesn’t matter on MAC valves.
New to the channel, glad I found you. I just purchased my turbo kit and I’m here doing research lol. Will be installing soon.
Grandpa Would Be BEYOND PROUD!! Nahaaa 🚬
Thank you for sharing your knowledge and making this great video!!
Also definitely do a video on the ac I’m in fl and that’s a must lol
You got it, I feel you on the AC. It’s necessary haha.
2nd on ac would love to hear more
Pretty SWEET build. I have an '88 325iX that would be even more fun with some added power. Keep the videos coming... and yes, some take it for a spin videos would be cool! Would be interested in more info on that GM wasted spark conversion too.
Awesome work!. Can you explain how you wired the wideband? Do you keep the factory o2 sensor? Is the wideband wired to the factory wire harness? Thanks in advanced
Thank you. I am using an Innovate LC2 wideband wired directly to the MS2 with the wiring provided by Innovate.
@@85garage oh OK thanks, and did you keep or delete your factory o2?
@@cryan4249it’s gone, not necessary with mega squirt
@@85garage interesting. Thanks so much for the info!
15:50 "this being a journal beraing turbo it only really needs a slight drip of oil going into this" -I thought ball bearing turbos needed less flow and journal bearing turbos needed high flow?????????????
A true masterpiece, and a gentlemen builder salute!
Thank you!
hell yeah I would love to see that sanden compressor setup! I know there are some companies that make sanden kits for rwd e30s but not IX.
Did you have it on the dino? What were the results?
i've owned my 1933 Ford 325iX with a spankin' brand knew 3 speed emmanuel!!!!! The iX uses epik lulz and bowlz to create a wild minimal flavor that Spartan 117 can't stand! He would rather get a 10000 whp Chevy Kilonova with 4 mini jet engines on the back and deja vu has
wut
Very nice video. I have an M42 powered 318i from 1985 (previous owner had the engine swap done) and while not everything from the video applies to my engine, I find the intercooler placement information very useful as I'd like to keep AC if I turbo my car.
Nice! Gotta have AC
great viedo
Love the build! U got a insta?
Thanks! I do, I just started a new one @eightyfive_garage. Ill be switching my content over from @nineteeneightyfive_garage soon.
@@85garage btw the spreadsheet says corrupted when you try to open