Procharged 6.0 LS Swapped 335i - Part 2!
Вставка
- Опубліковано 21 кві 2022
- Part 2 is live as we go over the fuel system, drop in the motor and trans, and finally fire up the new engine for the first time.
ENTIRE FUEL SYSTEM SETUP
-------------------------------------------------
Fuel pump - amzn.to/3xLfJdW
Magnafuel Regulator - amzn.to/3k2P44g
(Need 3)3/8 hardline to 6AN adapters - amzn.to/3EAg1Wl
(Need 1)5/16 hardline to 6AN adapters - amzn.to/3v4vN8H
(Need 2)-8orb to 6AN - amzn.to/36GBHni
(Need 1)-8orb plug - amzn.to/3K76DKZ
-6 PTFE line kit - amzn.to/3MpReH0
-8 PTFE line kit - amzn.to/3xLgvaQ
6AN Male T fitting - amzn.to/3L7m3Ae
6AN female to 8AN Male adapter - amzn.to/3K4uB9Q
30 Micron fuel filter - amzn.to/3xKB1Z3
4AN to 6AN rail adapter - amzn.to/3EA5r1F
1/2" NPT to 8AN bulkhead - amzn.to/3EJmYEz
1/2" NPT to 6AN bulkhead - amzn.to/3ECbvqm
Link to Coilovers!
BMW Rev9 - amzn.to/3ss5HtE
more CAN BUS modules are being assembled right now so if you aren't following the E90 specific Facebook group, be sure to go join so you don't miss out on when they drop, the last batch sold out before they even made it to the website. / 450961372349986
Keep tabs on all the new mount options coming out, as well as the new blog style posts Mike has been working on that detail a lot of the commonly asked questions and issues!
lse90.com/
www.hangmanperformance.com/
hangmanperf...
Common Terminator kits for the swap and GM Throttle body
Holley Terminator DBW with trans control - amzn.to/3ms9GmA
Holley Terminator DBW for manual trans - amzn.to/3uuPjs4
6 Pin GM DBW TB - amzn.to/2R4Ni7g
Split loom brand we use - amzn.to/2PGHxfN
walbro 450 pumps - amzn.to/3rWVUK6
fuel line kits - amzn.to/3fUj5Cx
6an - 3/8" Hardline adapter - amzn.to/3sbrlAe
Threaded IAT sensor - amzn.to/3dK9X0k
Fbody Water Pump - amzn.to/3uCcEYL
thermostat housing - amzn.to/39Xp4CL
Fbody a/c compressor - amzn.to/3fX6deI
Fbody a/c manifold - amzn.to/3uy8wJ6
T56 Slave adapter to AN - bit.ly/2PQx9lJ
TOOLS WE USE - LS SPECIFIC
Harmonic Balancer puller - amzn.to/3satEDU
Crane Cams Dual valvespring tool-LS1/2/6 - amzn.to/327TD4m
Fuel line disconnect - amzn.to/3d6Tpk2
Female Torx Sockets - amzn.to/322s7VQ
Everything filmed on this GoPro
gopro camera - amzn.to/3g166Px
External Mic - amzn.to/3d2eZGm
GoPro Mic Adapter - amzn.to/3dILsk4 - Авто та транспорт
“Just like that, your car worth 20grand”🤣🤣🤣🤣
Franks the best haha
Fun to watch 👌
Looking to do an ls swap on a 650i
What size procharger is that?
Are the brackets for the procharger available to purchase or order? And what accessory spacing are you using with that procharger??
Can’t wait to see the next update!!!
C5 accessory setup, D1SC head Unit.
I’ve talked to Mike about offering the bracket setup, and we also have dealer accounts for the head units, however some fab work would be required on the end user side. If something does end up becoming available we’ll be sure to let everyone know.
@@lse90garage ok right on! I’m definitely interested
Did you guys ever complete the 5 series mounts? love the stuff you have for the e90s
Mounts have been 100% confirmed, Mike just needs to have a laser cut order put in, there will prob be a preorder so he can gauge how many on the first run. He has confirmed that the E90 accessory drives work with a non active sway bar car, as well as the transmission mount options.
Cars with an active sway bar will need a diff accessory drive setup, that is still in the works.
I need a set of e60 mounts too. My Motor is built and my trans is almost done.
@@jasonjennings5833 what trans are you using ,my n52 just blow
Do you think a ls to zf with adapter plate will still line up with ur kit?
Yes many have used it but you need to use an auto driveshaft and our dct crossmember because the new location is 1" back from stock
So what does the stock pump/feed line do in this fuel configuration?
It’s still functioning like factory, I’ve simply added an auxiliary setup that is independent of the BMW factory fuel system.
It’s still functioning like factory, I’ve simply added an auxiliary setup that is independent of the BMW factory fuel system.
How did you cover the stock line to AN?
Link in description, 5/16 quick connect to 6an
Did this ever get finished?
It did, car is complete with working a/c and all, been very busy but hoping to get back to some content soon and that includes a part 3 on the 335i build. You can check out our Instagram to see it finished.