Steering Wheel Replacement - Airbag Removal Alfa Romeo Giulietta 940 Mito
Вставка
- Опубліковано 8 січ 2021
- Steering Wheel Removal Airbag Removal Alfa Romeo Giulietta 940
How to replace the Steering Wheel on an Alfa Romeo Giulietta.
Follow these easy steps that will guide you through the whole process.
If you have any questions, feel free to add them in the comment section.
Don't click this bit.ly/2OtrukQ
If you enjoyed the video, help me improve the quality of my channel by Subscribing and leaving a feedback. And don't forget to enable the notification, by clicking on the bell ! Thanks for watching ! ✌️
Music provided by
• Video - Авто та транспорт
If you enjoyed the video, help me improve the quality of my channel by Subscribing and leaving a feedback. And don't forget to enable the notification, by clicking on the bell ! Thanks for watching ! ✌️
Hey! If i wanted to remove just the black trim to wrap it, how do I do it ? Is it screwed of just a small pull?
thx for the video anyway
Thank you for your video, thanks to it I managed to replace my steering wheel! Cheers!
✌️
This is a great video, very easy to follow along!
Do I need to remove the steering wheel to remove the stalks? I'm planning on retrofitting cruise control on to my giulietta. Please do let me know.
Thanks
Excellent video,thanks.👌
Thank you mate. ✌️Don't forget to Subscribe if you haven't already 😁
Thanks for the video. Do you know how to remove the buttons for cleaning? The volume up and down do not respond well. Or how to clean them. Thanks.
You're welcome. I am not really sure. But I believe that on the inside of the steering wheel you have 1-2 bolts for every set of buttons. You can take them out and you can either use contact cleaner or Alcohol.
Big like for you 👍
Thank you mate. Cheers ✌️
Perfekt👍
Dankeschön. Wie geht es dir? Wann kommst du eigentlich zurück? Jeder Schicht hat eigentlich nur 3 Mitarbeitern noch, rest sind entweder "krank" oder in Urlaub.
Why do you replace it?, i have an abs code related with torque, when i check the live data, it shows me the angle of the steering and torque, i also have abs inlet valve and first and second valve problems, i think it could be the abs module, i don’t have codes related with wheels
Perfect 👌👌👌🤗😊
Multumesc draga mea. 🥰😚😘
Hello bro, I can't remove the airbag, the screwdriver turns empty.
Awesome video, but I wondered where you got that torque spec from, because when I replaced mine, I tightened it until firmly snug because I could not find a spec anywhere
Thank you. I found it somewhere on Google but I don't remember anymore. If it is tight than no worries. Just don't over tight it. 🙃
@@SlowFord thats what I was worried about😅 but thanks for the answer, eases the mind
@@rift9075 you're welcome ✌️
Just put some blue loctite and tighten until stop with normal force
hello, what do you show from 4; 13 to 4; 16 min
Hi. Thank you for watching. I was triyng to show that you need to be careful when centering the steering wheel, the wire plug from the SAS sensor needs to align in the hole from the steering wheel.
What is the name of the steering wheel?
Hey, thank you for the vid, may I have a written specifications about the exact torque needed as I am finding it hard to find it stated anywhere aside from within the video. Thank you!
I don't remember anymore, but you can just go to 50Nm, that should be enough.
Thank you! My steering is on the way so till then will try to find the exact specs. Cheers! @@SlowFord
Could you tell me the product number for the steering wheel you used?
You can copy-paste the following "Tuning Abgeflacht Alfa Romeo Mito Lederlenkrad Multifu. Alcantara" on Ebay. I can't share the link. ✌️
Hello, can you please tell me the size of the 12 size edge socket used? Cause I am about to replace the steering wheel and not sure the exact size? Thank you!
Haven't I said in the video?
@@SlowFord You did not, 12 edge means nothing it is the size of the nut itself, unless you meant 12 mm which is far too small...
Salut 😁✌️
Salut. ✌️
Why didn't you rather purchase a steering wheel used in Fiat 500 Abarth? Thx for this video btw
Didn't knew it was a thing. Found this one on Ebay and I liked it
@@SlowFord I found it out just yesterday. To be honest that Abarth steering wheel looks much better than the Giulietta stock one. Especially in suede trim
@@mizzomentall yes it does look good, but this ain't bad either 🙂
What’s the replacement wheel?
I bought it from ebay for 290€, It is not a specific brand.
@@SlowFord have you got a link/what you searched?
@@gingerlikescars8139 try and search it like this : alfa romeo giulietta lenkrad.
Did u find it ?
@@spinged4230 yeah and a few other like it:
www.ebay.co.uk/itm/154217767974
Not 12 edge socket for me 👎🏽
What do you mean? 🤔
@@SlowFord well basically I have a big black nut and it must be Minimum 24.
@@stifler2126 there is no black nut, that black thing is a rubber seal. You need to remove that, and you will see the nut.
@@SlowFord do you have a fb or another for discut?
@@stifler2126 go to the about section and there you will find a link to my FB