With the grb led controller you can completely control the colors separately. using the intensity correction of each color in the App. You can also schedule the lights to turn off and on each day according to the present cycle. U can see more about Controller led at link: www.amazon.com/Nexlux-Wireless-Controller-Compatible-Included/dp/B07116SX41/ref=pd_lpo_60_t_0/144-3267273-0150427?_encoding=UTF8&pd_rd_i=B07116SX41&pd_rd_r=c846f476-28a5-4d05-9b1c-919bbd955fbc&pd_rd_w=8w5mx&pd_rd_wg=eDvkl&pf_rd_p=2eae1586-a44a-4b21-997a-1dfc1740e496&pf_rd_r=WRW2GMH2VQBJG7F277H3&psc=1&refRID=WRW2GMH2VQBJG7F277H3
You should be add the module adjust more. You can see more information with link: www.amazon.in/Techtonics-Motor-Control-Regulator-12V-40V/dp/B07QB8WD1X
I used 12V for 3 Led , You need resistor 10 ohm-1/2W. With: Red led: 2.2V (1W) Yellow, white, blue 3.2V (1W) electric current: ~280-300 mA I set it like that for the purpose when led be using long time make the temperature increases after that voltage will put on the resistor, didn't make to break down led. You also use 4 led /12V and don't need mount resistor .
I bought them in the electronics store. This is Led luxeon with with specification. Chip type: High power Epistar led chip Led format: luxeon format - Power: 1W - Current: 300mA - 350mA (1W) - Certifications: CE, RoHS -Color: + Yellow (2000 Kelvin) + White (6500 Kelvin ) + White 10000Kelvin) Wavelength of color led: + Red (620nm - 625nm) + Green (520nm - 525nm) + Blue (460nm- 465nm) - Degree: more than 50,000 hours -Current: 3.0v-3.4v (only red: 2.2v - 2.4v) And Resistor 10 ohm-1/2W You can change them with the another led has same specification .
Bad , Bad , very Bad you are not an electronic technician ... The first led module will be more bright than others... Each module should have it's own driver ....
you're right, we can use the driver module for each led sheet But I calculated it to run at 60 - 70 % power of led only using a resistor and a 12V -5A power adapter is much cheaper. compared to led driver module
I have a 3 watt 60 led and a 12 volt 12 a adaptor. Could you please tell me which resistor I should use for a setup like this?
Best lee build I’ve seen how do you not have to put a thousand lil wires like evryone else does
Just amazing. Brilliant. I want try this at home. Can you please give links to this products? That will be very much helpful. Thanks in advance.
I'm very sorry, this product is not sold on amazon or ebay.. we bought them on a small local store.
ua-cam.com/video/UoOGy1gmD2k/v-deo.html
Hey can u please give me the electronic products list...
Like power supply, used resistors... Led's wattage
How do you calculate the resistors you need to use?
Very useful video bro. Thanks for sharing.
Can we control white red green blue independetly?
Can we do programming?
Lots of love n care from INDIA.
With the grb led controller you can completely control the colors separately. using the intensity correction of each color in the App. You can also schedule the lights to turn off and on each day according to the present cycle.
U can see more about Controller led at link:
www.amazon.com/Nexlux-Wireless-Controller-Compatible-Included/dp/B07116SX41/ref=pd_lpo_60_t_0/144-3267273-0150427?_encoding=UTF8&pd_rd_i=B07116SX41&pd_rd_r=c846f476-28a5-4d05-9b1c-919bbd955fbc&pd_rd_w=8w5mx&pd_rd_wg=eDvkl&pf_rd_p=2eae1586-a44a-4b21-997a-1dfc1740e496&pf_rd_r=WRW2GMH2VQBJG7F277H3&psc=1&refRID=WRW2GMH2VQBJG7F277H3
@@diyformyhome2265 thanks a lot bro for assisting us. U have complete knowledge. Great. The light also looks so perfect.
Happy aquascaping .
ua-cam.com/video/UoOGy1gmD2k/v-deo.html
Nice video bro...how can I ask the led strip at electrical shop is there any specific name about that strips please reply me🙏
what do u called to the white plastic u insert after finishing? the blurry plastic?
It's called by name "polycarbonate sheet for led lighting"
@@diyformyhome2265 What's the thickness of the sheet?
ua-cam.com/video/UoOGy1gmD2k/v-deo.html
what is the name of the plate.. on which you are putting on the light chips
RGB led PCB board
is it controlled or lit at 100%. ?
👏👏👏👏 amazing skill great job sir
Awesome!
hi is the degagement good with this fan
what you have used over the led?
its a glass?
this's Polycarbonate sheets for LED lighting
What is the name of this black aluminium sheet
This is the led trough W106 (width 106mm)
@@diyformyhome2265 Where we can get them in India ?
Can we buy from AliExpress or Amazon?
is it bright enough for plants?
Every led panel has 12 Led core . Also has 12 W, My light have 6 panel , Total 12 x 6 =72 W. Completely enough for the plants to grow.
ua-cam.com/video/UoOGy1gmD2k/v-deo.html
How many ohms of resistor are you using?
I used resistor 10 ohm-1/2W
where to buy the pcb board? and can you put the link thanks
What a dimmer you used ?
How do you adjust the intensity of the LED’s?
You should be add the module adjust more.
You can see more information with link:
www.amazon.in/Techtonics-Motor-Control-Regulator-12V-40V/dp/B07QB8WD1X
ua-cam.com/video/UoOGy1gmD2k/v-deo.html
Where can i buy that led pcb?
What was the entire cost of this
ua-cam.com/video/UoOGy1gmD2k/v-deo.html
How we can buy this items
i have 1w and 3-4 volt per led...what is the value of resistor for this led?
I used 12V for 3 Led , You need resistor 10 ohm-1/2W.
With:
Red led: 2.2V (1W)
Yellow, white, blue 3.2V (1W)
electric current: ~280-300 mA
I set it like that for the purpose when led be using long time make the temperature increases after that voltage will put on the resistor, didn't make to break down led.
You also use 4 led /12V and don't need mount resistor .
Very usefull👌
ua-cam.com/video/UoOGy1gmD2k/v-deo.html
This is for planted tank?
yes, This is Light for planted
hello. do you sell the lights??
What is the model of led panel?
What is the led board name?
What is the pcb specifications
Size: 8,5cm x9cm x1mm
16 led/PCB
Power 12V
Material: aluminum
Hello friend do you have any diagram how and whr to connect resistors
It's there in video..Pls watch the video till the end
How do you want to control it by wifi?
You can use any microcontroller that you want (Arduino, Raspberry etc..) along with Wifi module and PWM module.
ua-cam.com/video/UoOGy1gmD2k/v-deo.html
Where u buy PCB board?
you can buy on taobao.com or aliexpress.com
@@diyformyhome2265 direct link please, i don't know the name PCB call off
@@diyformyhome2265 link buy PCB board
@@diyformyhome2265 link you buy please
hi can you send me the circuit diagram
nice ...
Can you plz told me where can i get those led and trans ester how much amp ? If possible plz share your contact no. It would be very helpful
I bought them in the electronics store.
This is Led luxeon with with specification.
Chip type: High power Epistar led chip
Led format: luxeon format
- Power: 1W
- Current: 300mA - 350mA (1W)
- Certifications: CE, RoHS
-Color:
+ Yellow (2000 Kelvin)
+ White (6500 Kelvin )
+ White 10000Kelvin)
Wavelength of color led:
+ Red (620nm - 625nm)
+ Green (520nm - 525nm)
+ Blue (460nm- 465nm)
- Degree: more than 50,000 hours
-Current: 3.0v-3.4v (only red: 2.2v - 2.4v)
And Resistor 10 ohm-1/2W
You can change them with the another led has same specification .
Bongo cat sub to you..i found this on his page..lol
Kipasnya merk apa ya?
they're fan for VGA computer card
Bhai koi bhi DIY vedio bina audio ke bekar hota hai. Useless.
Bad , Bad , very Bad you are not an electronic technician ... The first led module will be more bright than others... Each module should have it's own driver ....
you're right, we can use the driver module for each led sheet
But
I calculated it to run at 60 - 70 % power of led only
using a resistor and a 12V -5A power adapter is much cheaper. compared to led driver module
ua-cam.com/video/UoOGy1gmD2k/v-deo.html
How do you decide the color placement on the panel?
I rely on color ratio
White 10000 (kelvin) + White 65000 (kelvin) + Yellow --> 40%
Red --> 20 %
Green --> 20 %
Blue --> 20 %
Wt will b da ratio if i use 3wt