Hello, the previous HAWK PRO used Split Rim tires. Now it has been upgraded to a tubeless one-piece tire, which is resistant to wear and puncture and has a longer service life. lf a puncture occurs, it can be repaired directly with repair fluid.
Or just save the first old tire that you have those work perfectly. I have about four used scooter tires I use them to put the motors on when I take them off, I also Jam a couple under the body to hold the scooter in place . Very useful
You guys have an amazing scooter. I would recommend a more detailed manual. Like what to do specifically. I’m not the smartest person when it comes to figure it out
I need to ask! My rear wheel went flat, I did everything as you showed but I didn't realize I didn't tighten the screws well enough and they fell out causing the back tire pretty much to fall out of place and the screws went everywhere! I couldn't retrieve them because I was on a busy street and they could have been thrown in the water drains or kicked around by other vehicles, so there pretty much lost forever! My question? Is what size are those screws? I need the measurements of them so I can order the right size. My model is the S10
Ive had so many rear flats i get that tire changed and ready to go in under 20 mins. The front i had to do once and took me almost 2 hours. The bars that hold the tire are so tight its a shitty job to do solo. Because while you’re trying to get the tire bolts in that tight space both bars that hold the tire also freely move and need to be held in place while struggling with the tight fit. I have to change the front tire right now and put it off for hours so i can end the night frustrated and stressed
Hello, different models have different tire sizes. You can inquire specific questions through this email: support@yumeway.com, or you can follow our website: www.yumeway.com/
Great explanation and great tips especially prepumping air into the new inner tube. Thank you
Thank you very much, I'm literally going to a bmx shop in an hour because they have the right tools, this helped a lot.
Does new Hawk Pro have Split Rim Design?
Hello, the previous HAWK PRO used Split Rim tires. Now it has been upgraded to a tubeless one-piece tire, which is resistant to wear and puncture and has a longer service life. lf a puncture occurs, it can be repaired directly with repair fluid.
Or just save the first old tire that you have those work perfectly. I have about four used scooter tires I use them to put the motors on when I take them off, I also Jam a couple under the body to hold the scooter in place . Very useful
You guys have an amazing scooter. I would recommend a more detailed manual. Like what to do specifically. I’m not the smartest person when it comes to figure it out
Hello. What kind of instrument and what size should it be to unscrew the bolts that hold the front wheel on place in the Yume Hawk scooter? Thank you
hi, pls email us to our after-sales department : support@yumeway.com, tell us your scooter model, then our technian will help you directly.
Do you make solid tires for this scooter? I keep getting flats
we can make item D4+, X11 and Y11 with solid tire
I need to ask! My rear wheel went flat, I did everything as you showed but I didn't realize I didn't tighten the screws well enough and they fell out causing the back tire pretty much to fall out of place and the screws went everywhere! I couldn't retrieve them because I was on a busy street and they could have been thrown in the water drains or kicked around by other vehicles, so there pretty much lost forever!
My question? Is what size are those screws? I need the measurements of them so I can order the right size.
My model is the S10
support@yumeway.com , Hi, pls email us and send the photos to show us which part of the screws you need
@@yumeelectricscooter9573What size screw for the Yume X11?
Ive had so many rear flats i get that tire changed and ready to go in under 20 mins. The front i had to do once and took me almost 2 hours. The bars that hold the tire are so tight its a shitty job to do solo. Because while you’re trying to get the tire bolts in that tight space both bars that hold the tire also freely move and need to be held in place while struggling with the tight fit. I have to change the front tire right now and put it off for hours so i can end the night frustrated and stressed
I have a Yume Hawk, and the lock washers on the inside will not allow the wheel to be removed. How do I remove the lock washers?
support@yumeway.com，hi, pls take a video to show us your problem with emal, our technician will help you directly
can i put bigger wheels on the y10?
What size are the Tyre Rim Screw?
hi,any problems, pls feel free to email us : support@yumeway.com
Is that a y10
yes, Y10
How do I change the back tire?
Remove 2 rear axle screw,pull out axle and screw out black screw only from left side and you can split 2 rims apart (not need to remove brake disc)
What tire size
Hello, different models have different tire sizes. You can inquire specific questions through this email: support@yumeway.com, or you can follow our website: www.yumeway.com/
Which YUME scooter is this? Y10?
In the video, the scooter is Y10, but other YUME items, you can also do according to these steps.
@@yumeelectricscooter9573
Bro I can't change the rear tire and 10 rather I can't move the engine and remove the tire because it doesn't have a screw.
@@williamsanchez1775 support@yumeway.com, hi, any problem, can email us directly
@@williamsanchez1775 support@yumeway.com, any problem, pls email us directly
How about when my motor wire is on the same side?
which item is your scooter pls?
Is this Frank?
Yes, it is Frank👍
@@yumeelectricscooter9573 Ok. I subscribed to the channel....
@@timdiggitty7064 thank you dear friend.
@@yumeelectricscooter9573 No prob
Help frank please respond help me out