Fix the push button flush cistern.
Вставка
- Опубліковано 1 жов 2024
- The worse WC flush made to man. Here is how to fix it.
Visit Al`s plumbing shop for parts at www.amazon.co....
Saved some money on calling a plumber? Click the SUPER THANKS button or donate here, www.dereton33.....
Thanks Al.
The water in my toilet just kept flowing and not flushing. I watched your video. All I did was twist and the water level rose to normal and it flushed! Thank you. I did not even have to take it out after twisting. Although I could not actually take it out, any ideas why?
I called 5 different plumbers who could not come out before searching on UA-cam and watching this video.
Thank you.
Great job! The valve was stuck twisting it freed it up.
Your keeping me out of business you mate
Sorry Wako.
What...you would charge someone probably 70 quid for a call out just for such a simple quick job. U lot Rob people SMH
Kot mi otworzył spłuczkę od sedesu, niestety oglądam filmiki na UA-cam i nie umiem tego z powrotem naciągnąć. Wydaje mi się to dość trudne, jak to zrobić?Nie umiem, mogę wysłać zdjęcie. Przycisk przestał działać.
Need to see it.
@@dereton33 Not helped
Plumbers making content >>>>
Yes, you would be lost without us ha ha.
Easy to follow video....had the ghost flushing issue....flipped washer no joy....replaced washer no joy....had my heating/plumbing mate look at it whilst he was servicing boiler....tried a few things but in the end had to replace the unit to fix the issue....process of elimination 👍
Sometimes the only way
Thank you so much, this saved me a tonne of trouble 🙏🏽
Glad it helped!
So helpful 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼
Glad it was helpful!
I have this cistern, and sometimes the toilet cistern will just refuse to fill with water when flushed - then it randomly seems to fix itself after a bit of poking about - could it be that this part you showed in your video is the cause of the problem ? I just don't know why water isn't filling it sometimes. Its bottom fed water pipe into it if that helps? Thanks!
It will be the valve that is faulty.
@@dereton33 Is that the bit you took out in your video ? Sorry if its a stupid question and thank you for answering
Happy New year Al and jan nice to start the year with a flush hand ace 8 5 7 👍🏿👍🏿 i've got my new year poker face on 👀👀👀👀
Ha a keep dealing Paul.
Does anyone know what to do when the button itself doesn’t want to return to the highest position without lifting the lid? No water runn8ng, just a stuck left button. The right one isn’t getting stuck.
New syphon.
You keep saving me money mate
That`s great It`s what I am here for.
Mine continues to run water after flushing and I have to give a little tap on the button after flushing to stop the leak. What could be the reason? It's a brand new toilet.
Not aligned properly.
Thanks Al, great advice. I had the same problem once but the problem was the cable between the button and flusher unit. It's like a bike cable with the inner metal wire and plastic outer housing. Once pushed, the cable didn't release back. Some grease applied in inner cable fixed it and been fine for last 3 years. Maybe that might help someone.
Thanks for sharing
Yes, silicone grease, it is great stuff. Little pot from Toolstation lasting me ages.
Accessing the cistern is my problem. I was informed on YT that, once the buttons were removed there'd be a screw which, once removed, would allow the lid to come away. I removed the buttons..no screw!
Is there anything i need to tighten or loosen on screws in the top of the lid?
Some have hidden fixing screws others you can just lift the lid straight off.
These bloody things should never have been invented.
Too true.
WHAT THE FUDGE WAS WRONG WITH OLD STYLE? 🤪
Thank you so much!
I will never be the same after this help. I will spread the message and change others lives like you changed mine 🎉
Thanks.
Thank You - Worked a treat
You're welcome!
Very good video but the builder sealed the top in as it’s furniture unit.
You will have to unseal it.
Do you just stretch the washer back over the end? I tried this before on a Roca push button flush in my house but was worried I was going to damage the washer. Ended up trying to remove the bit on the end that retains the washer and damaged it. Had the replace the flush unit.
Yes just stretch it back over.
The one that's connected to the lid
OK.
white vinegar
OK
They just badly designed?
Sure are.
Any idea on just the button on top of the cistern is loose, sliding side to side, going round in a circle.
New button assembly.
I have a simple flap one. But the button sticks sometimes, usually when I have guests meaning I have to run upstairs and unjam it.
Rubbish arnt they.
Take the button apart and give it a good clean. I sprayed some wd40 around the sides of it just to lube it up (😳). But so far hasn't stuck down letting all the water out