2012 - 2016 Subaru Impreza Backup Camera Install

Parts linked in the description below!
Watch a full tutorial as a 2012 Subaru Impreza / Crosstrek will have a Backup Camera installed to an existing double din touch screen Radio. This camera will be installed in the license plate area to the a Pioneer radio installed in a previous video.
This video applies to Subaru Impreza and Crosstrek XV models for years 2012, 2013, 2014, 2015 and 2016. For 2015 and 2016 model years, the dash bezel may be slightly different, but the technique used will be the same. This video includes complete wiring and installation of the camera.
Click here to see Part 1 where we installed the radio!:
• 2012 - 2016 Subaru Imp...
Click here to see a great video on how back up cameras work!
• Car Backup Cameras Exp...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts used:
*eRapta ERT02 License Plate Kit: amzn.to/2UHnznc
*18 Gauge Wire: amzn.to/3y2qK7x
Radio install parts used:
*Metra 95-8905B Double DIN Dash Installation Kit: amzn.to/3hj6RST
*iDatalink Maestro USU1 Subaru AUX / USB Adapter Kit
*Metra 70-7552 Radio Wiring Harness (Non Harman Kardon System): amzn.to/2U255xD
*Datalink Maestro ADS-MSW Steering Wheel Control Adapter: amzn.to/3A8eAMa
*Microbypass for Pioneer: amzn.to/3cmvNaB

[@ProvoBeastAudio]

Parts linked in the description!

[@gerryowen5577]

Thank you for being so thorough and not skipping any steps. This and your Subaru radio install video are what I need to get my job done. Very clean, very professional!

[@tinjardas4152]

Great video! This is the only full step-by-step tutorial I found on YT and got all the answers how to do it on my Subaru. Thank you!

[@bobosdreams]

A great video that walks you thru step by step. It looks very professional. Bravo! I have a 2011 Impreza Wagon and this helps a lot.

[@ldboehm]

Excellent install video!
Fantastic step by step instructions explaining everything very concisely.
I have this exact car and it helped me install my backup camera in the hatch. Thank you!!!
A hint. Using regular electrical tape, and a little bit of silicone spray gets through the tube in the hatch really easily.

[@stateofgrace54]

Excellent How to, thank you 👍👍

[@NiNjA636Ty]

Thanks for the great vid. Now install on my WRX hatch is going to be a breeze thanks

[@tripleconsonant]

gyatt damnn this is so much work

[@abbynormal942]

I tackled this b/u camera install on my daughter’s 2012 Impreza and the RCA cable was only long enough to reach the pass through boot on the hatch. I routed it the same way. How long is the RCA video cable you used in this video? Your videos were very helpful. Thank you

[@josiahfaver308]

Is it possible to run the wire from the inside of the cab to the rear lights? I can't find the exit from the inside

[@danteb198709]

What size is the head unit?

[@tiki1184]

So I had my camera installed and I took it too the dealership to have them run a inspection on my car and now my camera won’t turn on when I reverse anymore. What could they have done? It does work when I manually switch to it on the dashboard. So I know the camera still works

[@uidr]

Can i do it on original radio

[@joshskinner91]

Do the guide lines on the hu screen turn to reflect the turning of the steering wheel?

[@ProvoBeastAudio]

not on this type of camera, no.

[@rakinh]

Is soldering the extension wire necessary? Or can you get away with twisting it in and sealing with electrical tape?

[@Raphburger]

Yes, soldering binds the connections. Twisting and sealing with electrical tape can lead to the wires can becoming undone. A soldering iron cost like $10 from a hardware store.

[@ryandukas6878]

splice connectors can also work too

[@rmstark1966]

cant you hook into the factory cam?

[@ProvoBeastAudio]

Why are you adding an aftermarket camera to the factory camera?

[@yoom1857]

@@ProvoBeastAudiois there anyway to connect the existing came to a aftermarket camera?

[@nannozi-fy7er]

You sure u are running on hydrogen gas or using the two