What a great video! I'm retired and on a fixed income- you helped me save a couple of hundred bucks. Your step by step (and articulate) presentation was easy to follow.
This tutorial was great, just make sure to let everyone know to put the handle in, hold the assembly inside the door if you need to and then slide the handle towards the front of the car to lock it into place in the assembly.
thanks for your very informative and helpful video for me. have ADHD and bipolar mania. voices are very difficult to listen to sometimes. your is calming And slow enough to not make me skip video. I do everything for my vehicles possible if it does need certified mechanic. so thanks for helping me not have to pay anyone or ask someone else for help. much appreciated 👍. April
+@aprilgardner4397 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Amazing Video. My door handle just broke and I ordered a replacement which I plan on installing tomorrow. This video is so detailed and thank you for the great in-door camera angles! My door has the keyless button but Im replacing it with one without.
Great video, but you’ve shown me that it’s most likely best, if I have my service shop replace my door handle that’s only cracked so far. In my younger days, I’d probably go for it. Thanks for the show!
Thanks, just last night, my door latch would not open the door. Watching this video I think the rod from the handle disconnected from the yellow piece. Is the suction cups just a precaution?
I need to replace passenger front handle. Can’t find any videos to help. I’ve got the dang thing opened up but can’t figure out how to clip the new handle in. Plenty of videos for driver door.
Worked well for my driver door handle replacement. Some difficulties we had involved re-aligning the bolt holes for the door panel with the window arm. I got a "compatible" handle and it isn't gliding in and out as readily but it functions.
is this what I need to do then long story short the outslide driver side door wont open from the outside, but CAN open on the inside using the other handle/latch, i heard a clip or something fall out prior will I need to go this route to reattach whatever got loose etc? thanks!
Hey question. My door handle had a harness, it’s for a 2013 Nissan rogue. Just ignore the harness? Also, my inside handle stoped working after installation, any ideas why?
Great video. Very informative. Someone broke into my daughter's Nissan Rogue and broke her door handle in the process. Can I bring it to you for repair? 😮
Could not put the new handle. Inside plastic component shifted and the 30 torks edge bolt no longer aligns with the hole ... Not sure what happened ☹️ wish I had not attempted this
I have a 2010 Rogue AWD 360 and the driver's door would not open in or outside. The following steps may help you! (it is really not that hard. 1. Remove the 10mm bolt hidden behind the pull handle. Remove 2 - 10mm bolts from the handle used to pull the door shut ( hidden behind a pop-off face panel). 2. Roll the window all the way down. 3. From the outside of the vehicle, carefully pry up the inside panel past the metal housing which it hangs on. Start at the rear of the door and try to get at least 5 inches past the metal frame. PUSH the panel into the car and over the frame as you advance. 4. Using a GOOD flashlight, follow the window glass on the IN side look down 8 to 10 inches. If your's is like mine, you will see a white plastic piece with a hole in it hanging beside the glass. Snag it with a hanger and pull up and pull the door open. That little white plastic clip pulls the lever that allows the latch to free itself when you pull. You may have to stick the hanger in the hole (it fits) to jiggle it up and down. The lever has to be freed up sometimes before it frees the latching mechanism. Once the door is open, you should complete the removal of the door panel by pulling the panel from the plastic clips holding it in place. Visually Verify that the latch mechanism is moving up and down and lubricate the mechanism.. Examine the inside door handle and make sure the cable that opens the door is seated into it's proper hole in the handle to allow the cable to be pulled. Usually the "barrel" at the end of the cable isn't in its spot. Lubricate the metal part of the cable so it won't stick when it needs to go back. Pull the handle and make sure that the same little piece in the door latch release mechanism moves that moved when the white plastic piece was pulled. Try the outside handle once the inside handle has been verified to function. Hopefully the cable didn't come off the outside handle assembly. If you need those instructions let me know.
Well, this turned out to be an absolute lie. Couldn't get the panel off without breaking some pieces. Can't get the yellow rod off. How easy they made it look is super misleading
Most of the time you will not need to take apart the entire door just loosen the one screw on the side. ua-cam.com/video/yrheQ3_FES4/v-deo.html A zip tie also helps create a functional door in the meantime.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
What a great video! I'm retired and on a fixed income- you helped me save a couple of hundred bucks. Your step by step (and articulate) presentation was easy to follow.
Fantastic video! Was spot on for our 2012 Rogue, installation went very smoothly.
Thank you very much. My handle just broke today. I feel confident I can accomplish this on Saturday.
99% perfect video. That yellow clip took more work than you showed lol. 99 aint bad. Thanks!
This tutorial was great, just make sure to let everyone know to put the handle in, hold the assembly inside the door if you need to and then slide the handle towards the front of the car to lock it into place in the assembly.
thanks for your very informative and helpful video for me. have ADHD and bipolar mania. voices are very difficult to listen to sometimes. your is calming And slow enough to not make me skip video. I do everything for my vehicles possible if it does need certified mechanic. so thanks for helping me not have to pay anyone or ask someone else for help. much appreciated 👍. April
+@aprilgardner4397 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Amazing Video. My door handle just broke and I ordered a replacement which I plan on installing tomorrow. This video is so detailed and thank you for the great in-door camera angles! My door has the keyless button but Im replacing it with one without.
This was a perfect tutorial! I replaced it and put everything back together in less than an hour! Saved me a lot of money!
One of the best DIY video I have seen. Thanks. I have managed to change plenty of parts with your videos. Keep up the good work
Great video, but you’ve shown me that it’s most likely best, if I have my service shop replace my door handle that’s only cracked so far. In my younger days, I’d probably go for it. Thanks for the show!
Thanks, just last night, my door latch would not open the door. Watching this video I think the rod from the handle disconnected from the yellow piece. Is the suction cups just a precaution?
I need to replace passenger front handle. Can’t find any videos to help. I’ve got the dang thing opened up but can’t figure out how to clip the new handle in.
Plenty of videos for driver door.
Worked well for my driver door handle replacement. Some difficulties we had involved re-aligning the bolt holes for the door panel with the window arm. I got a "compatible" handle and it isn't gliding in and out as readily but it functions.
Dude, how do you disconnect the yellow clip???
is this what I need to do then long story short the outslide driver side door wont open from the outside, but CAN open on the inside using the other handle/latch, i heard a clip or something fall out prior will I need to go this route to reattach whatever got loose etc? thanks!
What a great and detail video. Good job. I don't need a mechanic thank you.
Hey question. My door handle had a harness, it’s for a 2013 Nissan rogue. Just ignore the harness? Also, my inside handle stoped working after installation, any ideas why?
Very good video, quite complex service, but with your good explanation, I managed it, thank you very much
+@ailton7799 Thanks for watching our video! 1aau.to/m/Shop-TRQ
Thank you for the video I don’t know how I managed to break my door handle off but I did lol on my 2012 Nissan rogue
What a great video! I cant wait to fix my door for a fraction of the $500 the shop wanted.
Great video. Very informative. Someone broke into my daughter's Nissan Rogue and broke her door handle in the process. Can I bring it to you for repair? 😮
Thank you so much for this; saved me money i really don't have rn.
All the cables for the sensor are not mention, do you have any video or steps about it? My sensor wires are broken
Do you have video for passenger door handle?
Is there a reason you didn’t tighten the window bolts?
Could not put the new handle. Inside plastic component shifted and the 30 torks edge bolt no longer aligns with the hole ... Not sure what happened ☹️ wish I had not attempted this
Thanks much for sharing this...i knocked it out in a quick 30 mins!
Excelente, muy detallado y con todos los pasos que necesita alguien que nunca lo ha hecho, gracias
🎉
THANK YOU SO MUCH.
Because of your video it just made my job simple and I appreciate you so much. Now I'll go subscribe lol
Good video thanks I did exactly what you showed. Super easy
perfect demo and thank you!!!
Just the video I was looking for to replace my actuator. I have a hard time reaching the yellow Pin. I guess my hands are too fat
I have a 2010 Rogue AWD 360 and the driver's door would not open in or outside. The following steps may help you! (it is really not that hard.
1. Remove the 10mm bolt hidden behind the pull handle. Remove 2 - 10mm bolts from the handle used to pull the door shut ( hidden behind a pop-off face panel).
2. Roll the window all the way down.
3. From the outside of the vehicle, carefully pry up the inside panel past the metal housing which it hangs on. Start at the rear of the door and try to get at least 5 inches past the metal frame. PUSH the panel into the car and over the frame as you advance.
4. Using a GOOD flashlight, follow the window glass on the IN side look down 8 to 10 inches. If your's is like mine, you will see a white plastic piece with a hole in it hanging beside the glass. Snag it with a hanger and pull up and pull the door open.
That little white plastic clip pulls the lever that allows the latch to free itself when you pull. You may have to stick the hanger in the hole (it fits) to jiggle it up and down. The lever has to be freed up sometimes before it frees the latching mechanism.
Once the door is open, you should complete the removal of the door panel by pulling the panel from the plastic clips holding it in place.
Visually Verify that the latch mechanism is moving up and down and lubricate the mechanism.. Examine the inside door handle and make sure the cable that opens the door is seated into it's proper hole in the handle to allow the cable to be pulled. Usually the "barrel" at the end of the cable isn't in its spot. Lubricate the metal part of the cable so it won't stick when it needs to go back. Pull the handle and make sure that the same little piece in the door latch release mechanism moves that moved when the white plastic piece was pulled. Try the outside handle once the inside handle has been verified to function. Hopefully the cable didn't come off the outside handle assembly. If you need those instructions let me know.
thank you very much for the guidance and knowledge!
muito bom o vídeo, serviço bastante complexo, mas com uma boa explicação sua, eu consegui, muito obrigado
Mine snapped in half, I have to pull the side that’s next to the lock on a angle to open, I hope I can find a metal replacement not plastic
Thanks for this video.
THANKS GREAT JOB
He covered everything except the "barrel" re install if the outer handle would not operate the release mechanism.
Seems to be a common issue with the 2012s...
What does the handle attach onto?
Well, this turned out to be an absolute lie. Couldn't get the panel off without breaking some pieces. Can't get the yellow rod off. How easy they made it look is super misleading
Most of the time you will not need to take apart the entire door just loosen the one screw on the side. ua-cam.com/video/yrheQ3_FES4/v-deo.html A zip tie also helps create a functional door in the meantime.
You made it way too hard. Many unnecessary steps.
This it's not for a 2011 rogue 🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬