Just had this fitted to my 2020 ST focus at Keith Motors Christchurch and have to say what a top job . No rattles and everything fits as it should . They have done a few so if your local to them and thinking about having this done your mind will be at ease and works amazing . Top Job
No sound available ( that's a Ford requirement ). When ignition is turned on, the Ford logo LED will lit Green, then Blue, then off. No light should be permanent on. If you have one, please send me some pictures at mobile.app@falcon.ro. Thanks!
They have fitted it correctly , i just wondered why there was no light on to say it is recording and i wondered why there was no volume . There are no tutorials that explain this ... and no mention in the instructions .
This isn't really a tutorial; it's a montage. It would be helpful to know how you popped off the A-pillar cover, or the cover along the windshield, for example. I'm stuck looping the first few seconds of the video trying to figure out how you did it!
You are almost right :). Was not my intent to make a step by step tutorial. Actually the installation is not a DIY job. Professional installation is required. Cheers!
And so NOT approved by Ford! Good luck finding a cheap DVR that meets Ford requirements: - SYNC integration; - Automotive temperature requirements; - Under 10 micro Amps current consumption when Park Mode is active; - Automotive professional approved installation; - etc. Good luck finding that!
@@falcon_tech Well this what have done MG on the ZS2, they installed a usb A port near the rear view mirror so that you can easily connect your dashcam.
The phone is connecting simultaneously VIA BT with the SYNC also to the DashCam(BLE). Functions available: - Record - Stop - Event - Snapshot - Some setups like CRash/ Park sensot activate/ deactivate, video clip or Event length, etc
@@falcon_tech thanks for the reply, however with the latest ios and sync 3 update app link doesn’t seems to be working for fordpass not sure about dashcam app also you guys are aware about parking surveillance kit available for 70mai and DDPAI cameras can’t this be used with this dashcam, it’ll help to avoid wire crimping/chipping.
The Ford DashCam app ONLY work with this camera. No other app, either, will work with this camera. The SYNC - DashCam connection is only possible in this sole combination Ford DashCam app with Ford DashCam DVR. In the situation you have this camera and SYNC connection do not work, please uninstall the phone app and re install it. If still doesn't work, please send me details: videos, pictures, screen captures, anything you may think of, at mobile.app@falcon.ro On the other hand the cameras you mentioned are much cheaper for a reason ;). Cheers!
Thank u! I stripped my entire car bc I won a very pristine 2017 Interceptor for $2500 at an auction with 50k miles at the auction( Trim and seats to bare bone) They decommissioned it by just cutting wires and leaving them out and about. I removed 50lbs of wires!! I just upgraded my Sync1 to Sync3. So everything is very apparent for me. Can I make a suggestion? Maybe write on video what things are. But I am grateful. I took an electricity class like 20 years ago and I had to dig deep to jog my memory
Thank you for the appreciation, mate! Pretty much is the same installation with only two differences: - The DashCam position - got a different template - The GND connection point. Anyway, all of these can be found in the installation guide inside the box. Cheers!
That's the ignition wire. The official Ford approved wire connection method is to use a butt splice. In this video is presented the official Ford installation for this product.
hi, can you help me with the Fiesta 2022 (Titanium Vignale Mildhybrid 155 hp, german). According to the Ford dealer where I bought the Fiesta, this camera is supposedly not compatible. But he could not tell me why. In the manual or in the list of compatibility is the Fiesta 01/2022 in it, I have also installed the Sync 3. If this indeed should not work very pity.
Hi, I just got a word from Ford. The DashCam it's in a process of verifying and validation for your particular type of Fiesta (among others). There are a number of things that needs to be checked: Ground connections, +12V and ignition feed, windshield variations, etc. Hopefully this will not take too long. Thank you.
That camera was never designed to work as DVR. I think they (Ford) do not want to mess with a safety device and use it for something else. I wouldn't...
Do you have a part number for that camera? I tried to order front and rear dash cam from my local dealer but all I got were the replacement parts for the parking camera and the lane keep camera. they've never seen this thing before. any help would be appreciated.
My f150 has 360 degree cameras all over it. Why can I not just record those to a usb drive in the center console? Seems unnecessary to have to add additional cameras for recording
The 360 deg. cameras it is designed for parking not for surveillance. The angles and orientation make them not suitable for recording a trip. The DVR cameras will always positioned much higher and they got a very different view angle. Cheers!
Unfortunately there was no Mondeo installation requirement. As long you have a SYNC3 unit, the DashCam is compatible, but the installation must be made according Ford standards. I think some requests from you as customer made to Ford can help. Cheers!
Uninstalling? Why? Anyway, there's not only time, but also some parts that may be needed. I don't know how the Ford is counting all of that, but at my company, uninstalling a device costs about half from installation price +/-.
Hi Falcon, I work at a Ford dealer in the UK, we've asked Ford for some showroom point of sale, but they haven't come back to us. Do you do any point of sale we can use to advertise this to customers?
Dear sir, Unfortunately we cannot sell this product, we only produce it for Ford (hardware and software). This device can only be purchased thru Ford accessories channel.
@@falcon_tech I realise that. I’ve bought one myself. I was asking if you could supply some sales material? Posters, videos? Something we can use to show the customers how it works
All the promoting materials should be supplied by Ford. Anyway we have done some promoting videos but it have to meet certain standards and regulations for them to be used as Ford material. Will take ages...
Brilliant tutorial, well done on capturing the process from multiple angles. I can see why a pro install is recommended, I would of broken at least 50% of those wee plastic clips, cracked the A pillar cover and the glovebox would never close flush again >_
Hi I’ve just bought a focus st pre order any idea if this can be factory fitted by Ford or can it only be fitted by the Ford dealer ? Like others have said shame Ford don’t pre wire these things am sure they would shift loads great vid btw 👍🏼
Hi, For now, this device can be fitted only thru Ford dealer channel. I'm sure that they are thinking to prewire this device, but this kind of factory harness modification take a lot of time as you may know. Thanks for the appreciation :). Cheers!
Hi, The camera should record continuously. Please send me some print screens or videos/ pictures to our support email address: mobile.app@falcon.ro. Thanks.
A universal device can be installed in any way you want (be careful, you may wave some warranties - for the device, car, etc...), but the Ford DashCam DVR can be installed ONLY in this way. if you want to retain the integrity and warranty of the car/ DVR ;).
If you have this camera definitely should work! If you are talking about the parking cameras, those were never designed to work as DVR. Please let me know how it is. Thank you.
No need for voice instructions. There is an install guide available for authorized Ford technicians. This is NOT a DIY job! Cheers! P.S. If you do not like that music, please mute the video :).
Just had this fitted to my 2020 ST focus at Keith Motors Christchurch and have to say what a top job . No rattles and everything fits as it should . They have done a few so if your local to them and thinking about having this done your mind will be at ease and works amazing . Top Job
Thanks a lot, mate! We take a lot of pride in this product.
@@falcon_tech I have 2 questions does this have sound and is there a light t that stays permanently on whilst driving .
No sound available ( that's a Ford requirement ).
When ignition is turned on, the Ford logo LED will lit Green, then Blue, then off.
No light should be permanent on. If you have one, please send me some pictures at mobile.app@falcon.ro.
Thanks!
They have fitted it correctly , i just wondered why there was no light on to say it is recording and i wondered why there was no volume . There are no tutorials that explain this ... and no mention in the instructions .
There's some info in the user guide inside the app and here some features presented in a short video:
ua-cam.com/video/foJLYyg6nSE/v-deo.html
Cheers!
This isn't really a tutorial; it's a montage. It would be helpful to know how you popped off the A-pillar cover, or the cover along the windshield, for example. I'm stuck looping the first few seconds of the video trying to figure out how you did it!
You are almost right :). Was not my intent to make a step by step tutorial. Actually the installation is not a DIY job. Professional installation is required. Cheers!
Start putting USB A Ports in the frigan Rear View Mirror!!!!!!!!!!!!!!! So simple, so cheap, so much easier to use a dash cam.
And so NOT approved by Ford! Good luck finding a cheap DVR that meets Ford requirements:
- SYNC integration;
- Automotive temperature requirements;
- Under 10 micro Amps current consumption when Park Mode is active;
- Automotive professional approved installation;
- etc.
Good luck finding that!
@@falcon_tech Well this what have done MG on the ZS2, they installed a usb A port near the rear view mirror so that you can easily connect your dashcam.
No doubt, different specifications.
We worked under very tight requirements and our DVR are 100% compliant with those.
"sir, is 50€ for the dash cam and 2000€ for the installation"
I'm afraid not, but if you are willing to pay that kind of money for the installation, I'm your man!! :))))
Dash Cams the way to go,,,saved me a couple times
True! The others are more nice on camera :)!
How it is getting connected to sync3 and what functions we can control via sync3.
The phone is connecting simultaneously VIA BT with the SYNC also to the DashCam(BLE).
Functions available:
- Record
- Stop
- Event
- Snapshot
- Some setups like CRash/ Park sensot activate/ deactivate, video clip or Event length, etc
@@falcon_tech thanks for the reply, however with the latest ios and sync 3 update app link doesn’t seems to be working for fordpass not sure about dashcam app also you guys are aware about parking surveillance kit available for 70mai and DDPAI cameras can’t this be used with this dashcam, it’ll help to avoid wire crimping/chipping.
The Ford DashCam app ONLY work with this camera. No other app, either, will work with this camera.
The SYNC - DashCam connection is only possible in this sole combination Ford DashCam app with Ford DashCam DVR.
In the situation you have this camera and SYNC connection do not work, please uninstall the phone app and re install it. If still doesn't work, please send me details: videos, pictures, screen captures, anything you may think of, at mobile.app@falcon.ro
On the other hand the cameras you mentioned are much cheaper for a reason ;).
Cheers!
Thank u! I stripped my entire car bc I won a very pristine 2017 Interceptor for $2500 at an auction with 50k miles at the auction( Trim and seats to bare bone) They decommissioned it by just cutting wires and leaving them out and about. I removed 50lbs of wires!! I just upgraded my Sync1 to Sync3. So everything is very apparent for me. Can I make a suggestion? Maybe write on video what things are. But I am grateful. I took an electricity class like 20 years ago and I had to dig deep to jog my memory
Hey! You're very welcome. I'm not really sure what I'm helping you with, but if it works for you, I'm glad :))). Cheers!
Good video. One question, is the same procedure for Ford Kuga/Escape 2021?
Thank you for the appreciation, mate!
Pretty much is the same installation with only two differences:
- The DashCam position - got a different template
- The GND connection point.
Anyway, all of these can be found in the installation guide inside the box.
Cheers!
What's the green wire you're splicing into and why? And how do you do that without touching existing wiring? :)
That's the ignition wire. The official Ford approved wire connection method is to use a butt splice.
In this video is presented the official Ford installation for this product.
hi, can you help me with the Fiesta 2022 (Titanium Vignale Mildhybrid 155 hp, german). According to the Ford dealer where I bought the Fiesta, this camera is supposedly not compatible. But he could not tell me why. In the manual or in the list of compatibility is the Fiesta 01/2022 in it, I have also installed the Sync 3. If this indeed should not work very pity.
Hi there,
Please let me check. I'll get back to you.
Hi, I just got a word from Ford.
The DashCam it's in a process of verifying and validation for your particular type of Fiesta (among others). There are a number of things that needs to be checked: Ground connections, +12V and ignition feed, windshield variations, etc.
Hopefully this will not take too long.
Thank you.
What I don’t understand is that my fiesta already has a camera in the windscreen for lane keep assist. Why can’t it use that as a dashcam?
That camera was never designed to work as DVR. I think they (Ford) do not want to mess with a safety device and use it for something else. I wouldn't...
Do you have a part number for that camera? I tried to order front and rear dash cam from my local dealer but all I got were the replacement parts for the parking camera and the lane keep camera. they've never seen this thing before. any help would be appreciated.
There you go: P/N 2421817
shop.ford.co.uk/products/dashboard-camera-for-integration-with-sync-4
@@falcon_tech Thank you.
i ordered maverick hybrid with dashcam. are those prewired or it has to go through similar procedure.
I really do not know. From my knowledge this DashCam - part number: 2421817 - is not installed on Maverick.
Surround cameras should be mandated for vehicles, especially Fords.
A lot of issues are solved in this way. A good investment!
Hi enjoyed the video. Do you know of a good installer in the Midlands/Birmingham area
Hi there! Thanks. Any Ford dealer should be able to install this product.
@@falcon_tech Thanks but I would like a different camera system installed
This is where I can install a bass system like Focal Ibus 2.0?
Here can be installed ONLY the DashCam which is designed especially with very low current draw.
Do you know if this is compatible with MY2021 models with the sync 2.5 8 inch?
Please send me a unit picture at tech.support@falcon.ro.
My f150 has 360 degree cameras all over it. Why can I not just record those to a usb drive in the center console? Seems unnecessary to have to add additional cameras for recording
The 360 deg. cameras it is designed for parking not for surveillance. The angles and orientation make them not suitable for recording a trip. The DVR cameras will always positioned much higher and they got a very different view angle. Cheers!
Dash cam installation outside ford casa does it voids the warranty?
I do not know for sure, but it should! This device requires professional authorized installation.
I have a Puma ST 2022 and the Ford parts site says its not compatible?
It should be, but I'll ask and let you know.
@@falcon_tech Thanks...appreciated
Will this fit a Mondeo (sync 3), it's just not listed on Ford website
Thanks
Unfortunately there was no Mondeo installation requirement. As long you have a SYNC3 unit, the DashCam is compatible, but the installation must be made according Ford standards. I think some requests from you as customer made to Ford can help.
Cheers!
Anyone recommend dashcams for the mach-e? Front and rear. No options at checkout buying mach-e to add a dashcam. ( UK )
This DashCam cover Mach-E too. Only front obviously.
SYNC3 and SYNC4.
Thanks!
Salut! Care este prețul instalării pentru Ford Puma? Unde aveți service-ul ?
Salut! Instalarea se face la orice dealer/ service Ford. Zi buna.
Is it compatible with a Kuga 2020 ST-Line?
It is compatible with Kuga from 01/2020. ST line should be the same. I'll ask.
All good for ST Line too!
Cheers!
What sort of labour time should I expect from Ford uninstalling this item?
Uninstalling? Why?
Anyway, there's not only time, but also some parts that may be needed.
I don't know how the Ford is counting all of that, but at my company, uninstalling a device costs about half from installation price +/-.
Hi Falcon,
I work at a Ford dealer in the UK, we've asked Ford for some showroom point of sale, but they haven't come back to us. Do you do any point of sale we can use to advertise this to customers?
Dear sir, Unfortunately we cannot sell this product, we only produce it for Ford (hardware and software). This device can only be purchased thru Ford accessories channel.
@@falcon_tech I realise that. I’ve bought one myself.
I was asking if you could supply some sales material? Posters, videos? Something we can use to show the customers how it works
All the promoting materials should be supplied by Ford.
Anyway we have done some promoting videos but it have to meet certain standards and regulations for them to be used as Ford material. Will take ages...
Brilliant tutorial, well done on capturing the process from multiple angles. I can see why a pro install is recommended, I would of broken at least 50% of those wee plastic clips, cracked the A pillar cover and the glovebox would never close flush again >_
Thanks mate for the appreciation. I got lucky to have a very skilled cameraman ;).
Cheers!
Hi I’ve just bought a focus st pre order any idea if this can be factory fitted by Ford or can it only be fitted by the Ford dealer ? Like others have said shame Ford don’t pre wire these things am sure they would shift loads great vid btw 👍🏼
Hi,
For now, this device can be fitted only thru Ford dealer channel. I'm sure that they are thinking to prewire this device, but this kind of factory harness modification take a lot of time as you may know.
Thanks for the appreciation :).
Cheers!
Bit bonkers that you can't record from the parking cameras to be fair 🙄
Super tare ca am urmarit pana la sfarsit ca sa observ apoi ca mergi pe Liviu Rebreanu 🤣🤣🤣🤣
:))) Suntem in zona.
Bafta!
What is the resolution on this camera?
1080p, Full HD.
Wie geht das ganze beim focus mk4?
Works just fine. No matter if you have SYNC 2.5, SYNC 3, or SYNC 4. Cheers!
@@falcon_tech Nur nimmt es nichts auf.
Ich kann meine Videos nicht auf den Smartphone sehen.
Wie funktioniert das?
Hi, The camera should record continuously.
Please send me some print screens or videos/ pictures to our support email address: mobile.app@falcon.ro. Thanks.
Can this dashcam be shipped to India?
You will have to ask your local Ford dealer.
@@falcon_tech Ford dealers in India have no idea about this
They have to ask in Germany. Unfortunately I cannot help you because this accessories can be ordered only thru Ford official channel.
This is ridiculous! I put a FitCamx on my 2020 F-150 in less than 2 minutes. I was up and running with it on my phone in like 3 minutes total.
You know that easy install is not all that matter, right?
Will they do in india?
I do not know. You have to ask your local dealer.
Fit cam x done
Mmmm. Installed a dash cam, with hard-wiring into the fuse box, inside 1 hr today on my Focus. None of the steps shown on this video are needed.
A universal device can be installed in any way you want (be careful, you may wave some warranties - for the device, car, etc...), but the Ford DashCam DVR can be installed ONLY in this way. if you want to retain the integrity and warranty of the car/ DVR ;).
@@falcon_tech OK, I didn't realise that ;-)
Mi coche ya tiene cámara y no funciona
If you have this camera definitely should work!
If you are talking about the parking cameras, those were never designed to work as DVR.
Please let me know how it is.
Thank you.
Cost ?
Please check the Ford accessories catalog.
Voice instructions would have been 500% better than that friggin music.
No need for voice instructions. There is an install guide available for authorized Ford technicians.
This is NOT a DIY job!
Cheers!
P.S. If you do not like that music, please mute the video :).
@@falcon_tech so sassy 😂
@@Clauds1005 Noo, so accurate 😉
Ach, so einfach ist das ! Die Erklärung ist voll für`n Arsch
Sure, it's simple, but not for everyone! This job requires specialized personnel. All the best!