Це відео не доступне.
Перепрошуємо.
Noico Sound Deadening my Vehicle! | Full Install & Sound Tests | 5th Gen 4Runner Panel Disassembly
Вставка
- Опубліковано 14 сер 2024
- In this video, I completely disassemble the interior of the 4Runner so we can try to improve the road noise inside the 4Runner. Thanks to Noico solutions for sending some sound deadener and sound insulation material to make this video possible. The project was definitely manageable and worth it. Check out the full video for more details!
I used 3x36 square feet of sound deadener and 3x36 square feet of sound insulation:
80 Mil Sound Deadener (Black): amzn.to/3H3fsFu
80 Mil Sound Deadener (Silver): amzn.to/3CZecAK
150 Mil Sound Insulation: amzn.to/3H3YHda
Deadener Roller: amzn.to/3kiXRj7
_________________________________________________________________________________________________
Instagram: / overland_engineer
Patreon: / overlandengineer
Website: www.overland-e...
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
DISCOUNT CODES:
MyMedic (21%): OVLDENG21
LASFIT (10%): OVLDENG10
Autonomous (Varies): R-ca5d0e
Midland (15%): OVRLNDENG
Throttle Grenade (10%): OVLDENG
_________________________________________________________________________________________________
Some gear I use:
GSI Non-Stick 12" Pan: amzn.to/32GikFe
Jetboil Flash: amzn.to/3gBDjB8
MSR Backpacking Stove (Closest new thing): amzn.to/3sH4cpS
Yeti 10 Oz Rambler: amzn.to/3sJUH9t
Yeti 35 Oz Rambler: amzn.to/3ayktHv
Smittybuilt 2781: amzn.to/3tK6fdP
Midland PPG1000: alnk.to/4Mtwmtb
Midland MXT275: alnk.to/btgG7un
Midland Radios Discount Code: "OVRLNDENG" for 15% off
Midland 6dB gain antenna: alnk.to/aAGTdqH
Midland 6dB gain mount:
Rago Fabrication Dash Mount: www.ragofabric...
Rago Fabrication Driver Side Antenna Mount: www.ragofabric...
Ethernet Passthrough: amzn.to/3sqCVZk
OEM Light: amzn.to/3sCtciY
_________________________________________________________________________________________________
4Runner Build Links:
Grill Lights: cartrimhome.co...
LFD Cross Rails: www.lfdoffroad....
LFD Wind Screen: www.lfdoffroad....
Gloss Black Vinyl: amzn.to/3iokqk1
Apache Storage Box: www.harborfrei...
Traction Boards: amzn.to/3nY7VN7
Mattress (Full Size): amzn.to/35PTdla
APEX Badlands 12k Winch: www.harborfrei...
C4 Fab Lo Pro Bumper: c4fabrication....
OME 3" Lift: ok4wd.com/old-...
---I have 2887 Front Springs, Rear 2898 Springs, 90010 Front Struts, 60080 Rear Struts, Stone Guards, and 5 mm Driver Side Lean Spacer
_________________________________________________________________________________________________
The Desk I use:
Standing Desk Discount Code: R-ca5d0e
Autonomous Smart Desk DIY Kit: rb.gy/61ouoy
_________________________________________________________________________________________________
Disclaimers:
-only products specified in this video or a previous video have been supplied though a sponsorship or partnership
-some links may be part of an affiliate program to help support the channel.
-the music I use: www.epidemicso...
0:00 - Intro
2:21 - Disassembly
12:49 - Materials
15:06 - Installing Deadener & Insulation
17:46 - Tailgate
19:08 - Installation Tips
20:05 - Sound Tests
21:27 - Door Slam Test
22:00 - Reactions, Thoughts, Takeaways
25:11 - Outro
I might add some kind of rubber coating in my wheel wells to try and combat road noise
Dude, perfect! You posted this on my birthday, same week I am also sound proofing my runner! Thanks so much!
Haha awesome!! Happy Birthday!
I know you said it wasn’t that bad, but man that looks daunting to take all that off.
Haha yeah it looks a lot worse than it is. But it’s a weekend of work. It takes time.
Really impressed Zach. I have a 2019 limited and it's actually fairly quiet at highway speeds. That said I'm running Michelin Defender LTX M+S all Terrain road tires in 265/60R20 and they are very quiet. (Wife's vehicle) . But I may look into this solution for my Jeep or my pickup. Both are pretty noisy. Thanks for all the effort. Much appreciated. Never really considered this as an option before.
Thanks! Yeah worth a try if you want a quieter ride!
You helped me with installing my alpharex headlights and I was going to start this project and I came across this video you also did! I love your truck and videos, so super stoked you can help with this project too!
Heck yeah!! Thanks for the support! I’d really recommend doing the headliner for maximum effect but I just didn’t have the time to do it.
@@OverlandEngineer I would but ive read the clips are $5 each oem and theheadliner is very fragile. I think it takes a lot to take off aswell.
Wow bro I'm really impressed with your thoroughness and the quilty of your videos... where were you 6 months ago ;) some of the stuff you talked about like all the extras space in the 2 rear panels, removing the center counsel, removing the rear wheel panels, etc it was like dejavu regarding the issues I faced back when I did this to my 2015 4runner. I wish this video would have been up then...it would have made it so much easier. You are so thorough and your vids are extremely helpful..TRD Jon Who? The end product really looked great and you are making me want to go back and redo mine. On second thought it was such a pain in the A__s I think not. Thanks for all the work you are putting in.
Thank you for your compliments! I do put a lot of time into videos and it is nice to see people appreciate it rather than me just being too wordy. Thanks for the support!
I swear...
Every time I start thinking about doing a project, you post a video about you doing that project. I'm very interested in doing this. When the time comes, I'm also going to do the wiring for my custom solar12v system as well. No sense in taking everything apart more than once.
Yeah when I had it all pulled apart I was thinking man I should do every single wiring project right now…
A decibel meter would have been handy. Some before and after readings from various locations in the vehicle - front to back etc.
Yeah that is true. Still probably could do that and comment but I don’t have a decibel meter…
Wow! Kudos to your effort and good job!
I'm impressed with all the effort that must have took, pulling all that apart. It's funny, I would think nothing of disassembling the suspension, but when it comes to interior stuff I feel like it never goes back the way it was, LOL.
Somebody else mentioned insulating the engine bay, and I had that thought too. The most annoying noise from my 4Runner are the noises from under the hood. I really, REALLY dislike how much engine noise intrudes into the cabin, and it's not a pleasant sounding engine noise either. I've never owned another vehicle with an engine that sounded like it was broken and in pain, LOL.
Excellent work! However, I went with Kilmat because Noico has an asphalt base to it. In the summer, that will absorb a lot of heat. But not bad for you if you live in a cold climate
Sheeesh thats a monster of a job! Excellent work. Seen this video before but just had to give you props for the work. Great video. I would charge no less than $800 plus material... Would you say thats fair? Thanks for posting 🤙🏽 im doing this to my 5th gen next week. Been adding resell value left and right. Thats my story... sticking to it. 😅
Great video! Thanks for putting it together!
I’m about to do this to my 4Runner while I’m installing a new sound system. One thing I’ve been wondering, would it be possible to fill the door cavities and rear cargo cavities with some sort of packing or foam to further reduce sound travel? Or is there something in those places that would impede that? I’m considering doing some sort of expanding foam in plastic bags to keep it dry.
Hmm...maybe...a lot of closed cell foam inherently is a water barrier. The shape is odd and the access is difficult. The window also needs to roll down basically right in the middle...could try!
@@OverlandEngineer the window rolling down in the middle was what I was afraid of. Maybe I’ll roll the windows down during install to see if there’s any way to just adhere some 1” foam sheets without contacting the window. Thanks!
Great job, you really went over the top.👏 I just have a couple questions I wasn’t clear about. In the doors, both front and rear, (in the space behind the vapor barrier) did you use BOTH deadening and foam insulation? Is there proper clearance for both, with the window? And I assume you took a ratchet and removed that foam block while you worked then put it back in right?
Same for the tailgate, inside the tailgate vapor barrier did you use both or one? I don’t think I’ll be removing my whole interior but I’ve already used the silver Noico on my door cards and on the door surrounding hardware speakers etc. notice a huge difference but like you mentioned I want that solid door sound and to not have a so tinny sound when you knock on the outside of the doors.
I did both and I think I put back the foam block. I don’t quite remember the block…
The other day I was thinking about doing something to improve the sound deadening in the doors. Are you available next week? :)))
Haha I am not sure I can do that job twice in one year...but it is totally worth it and more approachable if you are just doing the doors. You will need a second person to get the interior panels back on for the second row doors FYI. At least I did haha.
The sound deadening was pretty nice. Butt my First thought was Damn look at the wasted room Behind the plastic that is begging to be used.
Exactly. Yeah if there was a good way to build custom built ins in the rear, I could create so much storage!
🤔🤔🤔If there was only a way huh @@OverlandEngineer 🤔??? Is that gears I hear turning already??? Have you seen @SharingtheWild minivan build? Well worth checking out for build ideas.
@@tpseeker3367 Never heard of him but that is some super nice built ins he has. I have slightly thought about it but not much. It looks like he maybe had access to a CNC for cutting wood or something? Not sure but I just don't know what to make the structure out of so that it is supportive and can bend around all the different cavities and turns.
Jigsaw, skillsaw, drill & cardboard is all he used @@OverlandEngineer from what his build vids showed. He's got some mad skills bouncing around that noggin of his.
Guess after awhile living in something for so long the mind can wonder in so many directions & his was put to very good use in how to use literally every Inch he has @@OverlandEngineer
Wish u would have buckled the seat belts
holy jeezus
would like to see the hood insulated and and hear the difference.
Why do you think that would help? I’m curious.
@@OverlandEngineer the loudest component on any vehicle is the engine less noise in cab insulating. toyota might have a part # for the hood insulation for your 4runner.
@@Dieselnm101 I would be curious about this too. I have a similar 4Runner, and I don't find it to be especially noisy. The biggest source of noise seems to come from the engine. And it's not good noise either. I love the engine noise from the 5.7 liter LS1 in my Firebird, the 4runner however sounds like a Ninja blender full of ball bearings.
Can you use that stuff under the hood ?
You did great 👍🏻 May Allah Gide you to Islam